Managing 10.4 clients with 10.5 Server

Before I jump in....any feedback on managing 10.4 clients with 10.5 server (will post the vice-versa in the 10.4 server forum) from those who are doing it currently?
Thanks,
k

I checked out the link you mentioned. It's really dealing w/ managing the client. I'm have weird issues w/ clients logging in. Today I had a grade level try to log in. Ten of the computers would let that grade level in, two would not. Of the Ten computers approx 5 wouldn't let them log in the first time, but once they were restarted they were able to log in. All of the computers are on a wired network as well as a wireless backup. Of the two that would not let them login I had just restored one and set the settings up the same as the others.
I'll be damned, this is the weirdest I have had with Apple client management.

Similar Messages

  • Probelm client auth from jsse client with open ssl server

    I tried to connect jsse client with a openssl server.. with clientAuth
    This is what i did ..
    Using openssl req comand i created a X509 certificate for server and imported the same to java keystore..
    The communication works fine without client authentication.
    To enable client auth i create client private/public key pair using keytool and exported the public key to a file client.public. and used it in open ssl server .
    This is how i invoke the client ..
    java
    -Djavax.net.debug=all
    -Djavax.net.ssl.trustStore=cacerts
    -Djavax.net.ssl.trustStorePassword=changeit
    -Djavax.net.private -Djavax.net.ssl.keyStorePassword=password EchoClient
    After which i get following error in server
    SSL3 alert write:fatal:handshake failure
    SSL_accept:error in SSLv3 read client certificate B
    SSL_accept:error in SSLv3 read client certificate B
    ERROR
    17246:error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate:s3_srvr.c:1666:
    shutting down SSL
    CONNECTION CLOSED
    The client debug says it is recieving a certificate request.. what could be the problem.. can anybody help...

    i also have that problem. I was trying to configure SSL in apache in Win XP machine, but this error occurs. Is there anyone, who can help on it?

  • Unable to connect the crm client with the IPC server

    Hi,
    I am unable to connect with one CRM client with the IPC server.
    my Dispatcher and all the IPC servers are working all.
    Plz helpme out.
    With thanks and Regards,
    Yusuf.

    Hi Muhammed,
    Check in the file dispatcher.properties if the RFC names are correctly maintained.
    Regards,
    Patricia
    PS Your post was in the wrong forum. I moved it to the correct one where the chance of an answer is much higher.
    Hope you understand and good luck.
    Regards,
    Patricia
    SDN Moderator

  • Advantages and Disadvantages of Using Oracle 7 Client with Oracle 9 Server

    Hello,
    I was wondering what are the advanatges of using Oracle 7 client with Oracle 9 Server versus using Oracle 9 Client with Oracle 9 server.

    Some years ago I used 7.3 Client with 9i DB, and I don't remember of particular problems, but I'm speaking of Sql*Plus only. Are there specific problems ?
    Of course the best thing is to install one 9i Client (did you already do it ?) : if there are same problems, then that's not compatibility issue.
    And what are advantages of using 9 Client with 9 server other than 7 is no longer supported.You're sure you won't have compatibility problems.
    If you have access to Metalink have a look at [url http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOTE&p_id=207303.1]Note 207303.1

  • Manage 10.8 clients with workgroup manager

    Previously using Mac OS X 10.6.8 server with workgroup manager to manage clients.
    Installed new server running 10.8.
    I downloaded and am using the Workgroup Manager application for 10.8.
    I set up a client running 10.7.  Used the "Users and Groups" pref pane to join my directory server, and was able to then add that computer to a new group in wgm and manage the preferences.
    I set up another client running 10.8.   Used the "Users and Groups" pref pain to join my directory server, and it does not appear in my list of available clients when I browse for it to add it to the computer group.
    Does this functionality no longer work with 10.8 clients?  Was hoping to avoid profile manager for one more year....
    Thanks for any help,
    Chris

    I'm curious to know if you're still having this issue, I'm seeing the same thing here in our setup.  We have no problems with any of these users actually logging in, but we're certainly seeing a lot of them show up as "not found" ... and once they have been "lost" they seem to be lost for good!
    I'm not sure if it's something stuck in cache or if our overworked AD server doesn't respond properly and breaks something ...

  • Interoperability: WSDL-based Java client with MS SOAP server

    Does anybody have the experience with a Java client communicating with Microsoft
    SOAP server based on the WSDL protocol? My initial experiece shows a lot of problems.
    Any information in this regard is appreciated.
    Thanks

    I'm experiencing the same sort of problem too.
    I downloaded Bea Web Service Broker in order to test some MS Soap-based web services
    before developing some Weblogic EJBs which are to use them, since both of them
    (WS Broker and Weblogic EJBs) are said to use the same underlying package of Java
    classes to access any web service.
    Most of the MS web services won't work with this tool. I have problems with remote
    methods that have one or more parameters (the remote methods seem not to get them)
    and also with some web services that raise FileNotFoundExceptions from URLs (rather
    odd to me) on the Broker, despite the fact those URLs are valid.
    Any hint or suggestion will be very appreciated.

  • Windows 7 Client with Windows 2000 server

    Hi ,
    We are having an application developed in Delphi 6 and hosted in Windows 2000 server(sp4) .Recently we have migrated all our clients to windows 7 from XP.  Since then we are getting Access Violation error whenever we are using the application.
    We are accessing the application through RDP (Remote Desktop ) from Win 7 Clients to Windows 2000 server.
    Could any body help me how to resolve this issue as this is stopping the business.
    Regds 
    Vignesh Krishnan B

    Hi,
    As Windows 7 uses NTLM2 by default, please try to set it to “Send LM & NTLM – Use NTLMv2 session security if negotiated”
    How to:
    Open secpol.msc -> local policies -> security options -> Network security: LAN Manager authentication level.
    Best Regards.
    Jeremy Wu
    TechNet Community Support

  • Request sending client to client with in single server

    hi
    i have created one request, how do i transport this request from one client to another client within  the same server
    i have created already 200 and 300 clients, now my question is , how to transport this customises request from 200 to 300 client in the same server..
    Rgds
    Soumya

    hi
    in SCC1, I entered 200 client in source client , i selected request then it showing error that is source client is same as the logon client..how to proceed on..
    Rgds
    Soumya

  • Remote Access Management Console - configuration issue with Network Location Server

    2012 Std R2
    The remote Access management console operation status shows  all green except for network location server .
    Error: There is no response from the network location server URL. DirectAccess connectivity might not work as expected, and DirectAccess clients located inside the corporate network might not be able to reach internal resources.
    Resolution listed as:
    1. Configure the network location server on a server that is highly available to clients on the internal network.
    2. If the network location server is running on the Remote Access server, ensure that IIS is running, and that the URL is available.
    The remote access server is located on this server. IIS is running. What URL: show I be looking at?
    Any other thoughts so I can get remote access working.
    l also am getting a remote access error for IPV6, could this be a cause:
    RoutingDomainID- {00000000-0000-0000-0000-000000000000}: Unable to add the interface {D37062B2-A3E0-4496-A459-9E0BBCE5423C} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
    John Lenz

    Hi John,
    please follow the steps to reinstall TCP/IP stack.
    1.Restart your PC into Safe Mode with Networking.
    2.
    Edit your registry. Delete the following keys:
    HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock
    HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock2
    3.
    Open the nettcpip.inf file in your %winroot%/inf folder
    (%winroot% is usually c:/windows).
    Find the [MS_TCPIP.PrimaryInstall] section. Change the Characteristics value from 0xA0 to 0x80.
    Open the properties of the network connection you want to fix. In the General tab, click on the Install button. Click on the Have Disk button, and point the location to %winroot%/inf. After that select TCP/IP (not version 6).
    4.
    Now you would notice that you can uninstall TCP/IP!
    Do that, then restart the PC.
    Go back to your network connection, and install TCP/IP again as per the above. After another reboot, you should be up and running.
    I also noted that the XP network repair tool may yank out the ISA 2004 firewall client stuff. Just run the firewall clinet repair or install it again to fix that problem after you did your reboot. Before you do this kind of crazy stuff.
    5.
    This along with a TCP/IP reset using the netsh command:
    netsh int ip reset resetlog.txt
    wish you have a nice thanksgiving too
    Regards,
    Mike
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Instant Client with SQLServer2005 Linked Server

    I have successfully installed Instant Client 11.2.0.1.0 on my Windows Server2008. I am able to create an ODBC data source selecting the driver "Oracle in instantclient_11_2". I have also been able to link tables from Access to Oracle. I can logon to Oracle through SQLPlus and execute a query against the Oracle database. I am unsure how to set a Linked Server object in SqlServer 2005. When I use "Microsoft OLE DB Provider for ODBC Drivers" and supply the Product - DBName and Data Source - ODBC data source previously created here is the error I receive:
    TITLE: Microsoft SQL Server Management Studio
    "The linked server has been created but failed a connection test. Do you want to keep the linked server?"
    ADDITIONAL INFORMATION:
    An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
    Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "DB1".
    OLE DB provider "MSDASQL" for linked server "DB1" returned message "Specified driver could not be loaded due to system error 1114 (Oracle in instantclient_11_2).". (Microsoft SQL Server, Error: 7303)
    Thanks!

    Although the 10.1.0.3 instant client for windows doesn't appear to be "officially out", if I try to download
    http://download.oracle.com/otn/nt/instantclient/instantclient-basic-win32-10.1.0.3.zip and similar files, the files do exist.
    Unfortunately this version still can't connect to my corporate Oracle database:
    Oracle8i Enterprise Edition Release 8.1.6.0.0, 64 bit - Production
    With the Partitioning option
    JServer Release 8.1.6.0.0 - Production
    Oh well, back to a full client install of Oracle 9i.
    Perhaps the official release when its documented on the Instant Client download page will work.
    Jamie

  • Lion clients with Snow leopard Server

    Are there known issues with a Snow Leopard Server Mananging Lion Clients.  I currently manage 40 IMacs in two labs
    all running Snow Leopard, the only services I use on the Mac Server are Open Directiory, Print Services, AFP, and FireWall services
    the Server is a Mac PRo with 2x3.2 Ghx quad-Core Intel Xeon Processor and 32. GB RAM

    Snow Leopard can't serve AFP devices to Lion clients out of the box.  There seems to be a workaround, but I haven't gotten it working myself yet.

  • Oracle 8i client with oracle 9i server

    hi friends..
    i have oracle 8i server and clients..my oracle 8i server crashed.
    so i am planning to install oracle 9i server.
    will i be able to connect oracle 8i clients on to oracle 9i server? is there any procedure for getting this connection.?
    Please help

    Look up the documentation for questions like this, under 'backwards compatibility'
    You can't configure a client to work with a higher release, it works or it doesn't work.
    This one will work.
    Sybrand Bakker
    Senior Oracle DBA
    Experts: those who wave their head at newbies not reading anything and yet continue to use desupported trash.

  • WebI XI 3.1 Client with XI2 SP1 Server

    Hi
    I'm trying to get an installation of WebI XI 3.1 working.  We have XI2 SP1 on our server.
    I have installed the software, when I try to login I get the error message saying "login failed."
    When I try to update the licence key on the CMC I get the following message.
    "There was an error while writing data back to the server: License Key Error: Invalid Key..."
    Does anyone have anything to say regarding combination of client server version.
    Thanks in advance.
    Sean

    Hi Sean,
    This forum is not for Business objects, it's BI related.
    Anyways, Please check the below links for more information on your issue;
    http://www.forumtopics.com/busobj/viewtopic.php?t=60364&start=0&postdays=0&postorder=asc&sid=9e1c3b5b9a7c8d871fe59eecb9bbcbb8
    http://www.forumtopics.com/busobj/printview.php?t=99235&start=0&sid=a9a560fd69eeee44987841454212210a
    If you want more on the Business object you to go to this forum;
    http://www.forumtopics.com/busobj/search.php
    Hope it help you.
    With Regards,
    Ravi Kanth

  • Instant client with Oracle 8i server

    I am pretty new to Oracle.
    I just installed instant client on my xp workstation, and set up all the variable. I am trying to connect to a Oracle 8i server.
    Can instant client connect to Oracle 8i?
    Thank you!

    Although the 10.1.0.3 instant client for windows doesn't appear to be "officially out", if I try to download
    http://download.oracle.com/otn/nt/instantclient/instantclient-basic-win32-10.1.0.3.zip and similar files, the files do exist.
    Unfortunately this version still can't connect to my corporate Oracle database:
    Oracle8i Enterprise Edition Release 8.1.6.0.0, 64 bit - Production
    With the Partitioning option
    JServer Release 8.1.6.0.0 - Production
    Oh well, back to a full client install of Oracle 9i.
    Perhaps the official release when its documented on the Instant Client download page will work.
    Jamie

  • Mixing 10.4 and 10.5 clients with 10.5 Server

    This is the question of a neophite, but in looking through documentation and these boards I do not see a definitive answer to the following:
    I am starting the process of installing a 10.5 server in an office environment that to date has consisted of standalone desktop clients. Some of these machines are running 10.5, others are still running 10.4. This is a low-budget operation, so we'd like to keep it that way unless absolutely necessary. I am trying to understand how the issue of preferences, etc. will work once users are logging into a server with centralized home directories. In particular, if a single user sometimes logs in from a 10.4 based client and sometimes logs in from a 10.5 based client, is there a version conflict between preferences saved in ~/Library, or any other files stored there? Is there inherent backwards and forwards compatibility so it is not an issue? Or, are these preferences separated somehow within the home directory tree? Or, does it blow up in the user's face?

    Silvester wrote:
    Yes you want to setup an Open Directory.
    Server Admin -> Open Directory currently says the Role is Standalone Directory. Is that OK or should it be an Open Directory Master?
    Try these things Open Terminal on the Server and type "sudo changeip -checkhostname" without the quotes
    If that all comes back good then DNS should be fine
    It was fine.
    On the client machine in a local administrator account open terminal and type "host yourserver.dnsname"
    the name you type there is the one that got returned from the changeip -checkhostname command
    the ip address that it give you back should be the IP address of the server (either a 10.x.x.x or 192.168.x.x) iff all is good jump down 1 step to the Directory Utility step below
    Reported an error.
    if it is not then
    Open system preferences on the client and select network then in the Ethernet or Airport whatever one you use in the DNS Sever section type the servers IP address (10.x.x.x or 192.168.x.x)
    Done. Now the "host yourserver.dnsname reports the correct IP address.
    Open Directory Utility and delete whatever server is in the list and add a new one using the DNS name ie. yourcomany.private not an ip address
    RESTART the machine
    Here's where it fails, same as before. I get the error:
    There was no response from server.stpeterspress.private. Please check that the address you entered is correct.

Maybe you are looking for