Managing CAL ABAP on HANA instance and removing the secondary windows instance?
When you setup the ABAP on HANA CAL instance with AWS you get two AWS instances. One which is the ABAP on HANA server and one which is a Windows system holding copies of the development tools, etc.
I never use this second instance as I log on from my own pc/laptop; so its just wasting money. Can I simply delete it from the AWS console. The CAL does not allow me to delete it on its own. If I do delete that instance can I still manage it with CAL or am I on my own with AWS from that point?
Regards,
--Jason.
Hi Jason,
SAP CAL keeps track of what happens to the instances in your AWS account, the status is polled every other minute or so. Simply suspending or terminating it could have a severe effect on the operations in CAL.
Have you thought about starting the Windows instance on a smaller (probably too small) instance type which costs just a couple of cents? CAL cannot track if the SAP system in the instance is functional or not, CAL just checks the status of the container. So you could start the Windows instance on a 512MB machine ....
I know that this is not what you was aiming for, but it will probably solve the costs issue in the first place quickly.
Regards,
Hannes
Similar Messages
-
How to close and remove the current panel when loading another vi ?
Hello,
After login , I need to close and remove the login window , then launch another panel . How to do this?save "sub" to labview's default directory
save "main" to anywhere in your PC and run it.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
intro_self_close.vi 37 KB
ianf_Test001.vi 33 KB -
Extend the EPM install to a new EOI and remove the old EOI's (server decommissioning). EPM version 11.1.2.1 and having essbase and planning; I understand removing EOI's is not as simple as 11.1.2.3 but any suggestion/steps would be of great help....
Next time try to create a topic that is not the question.
There was no option to remove epm instances in 11.1.2.1, basically the cloest you get is uninstalling the products on the server and hope that some of the info is removed from the epm registry
Cheers
John -
Here is the order of what I did to my iPad:
1. A restrictions passcode was put on and we couldn't remember it. Despite numerous attempts at righting this, I couldn't. The iPad would not sync with any iTunes on any computer, Mac or PC.
2. I put a, 'use passcode after one minute' passcode on it and deliberately put in 10 wrong passcodes so it would disable the iPad. Now it still will not connect to any iTunes.
3. I connected to my iCloud account and removed the iPad from the cloud; it says it will erase all iPad data when it connects to the internet. I am fine with that, I need to know what to do now, though. iPad says, 'Connect to iTunes,' but it won't. Please help this amateur of all amateurs!!See iPhone DFU mode explained, and how to enter DFU mode.
-
Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?
Hi ajoddo20,
Welcome to the Apple Support Communities!
You can use Home Sharing to import music and other media from one computer to another. Please use the instructions and information located in the attached article for information on how to complete the process.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
Cheers,
Joe -
My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.
-
I reseted my ipone and removed the number how can i get it back
i reseted my ipone and removed the number how can i get it back
Two solutions come to mind:
Use your phone to call someone, and have that person use Caller ID to tell you your phone number.
Contact your cellular carrier. Here's how: Contact a mobile carrier -
How can I select and remove the football net behind the goalkeeper with Photoshop CS5?
Hello,
Could you please help me with the following case. I have a photo of a football game and I would like to select and remove the football (soccer) net behind the goalkeeper. Do you know what is the procedure for selecting and removing of the net so as to "clear" the goal showing only the goalkeeper in the frame of the goal?
Thank you in advance,
Petar
Product: Photoshop CS5Hi Petar,
You're in luck. Photoshop CS5 was the first version to come with Content Aware Fill. You can use this to seamlessly erase objects, like your net. Try taking a look at this video, which should help you do just that: -
Move a file to external disk and remove the original
This is a script that was supplied to me on these forums it has been working well, but all the transferring of the files took place locally so a 'Move' command does it eactly what it says, however I now need to move it to an external drive, as a result it leaves trace of the original file.
How can I make it MOVE and remove the origial File please?
set fileMatrix to {¬
{folderName:"BHS", prefixes:{"BH70", "SM70", "AL70", "BH11"}}, ¬
{folderName:"Bu", prefixes:{"BU40", "BU11"}}, ¬
{folderName:"Ca", prefixes:{"CW"}}, ¬
{folderName:"Da", prefixes:{"ES20", "AM20"}}, ¬
{folderName:"Di", prefixes:{"DV25", "DV11"}}, ¬
{folderName:"Do", prefixes:{"DJ30", "RA30", "DJ11"}}, ¬
{folderName:"In", prefixes:{"GT55", "CC55"}}, ¬
{folderName:"Fr", prefixes:{"FR10", "FR11", "FR17"}}, ¬
{folderName:"No", prefixes:{"TM17", "NN_"}}, ¬
{folderName:"Ma", prefixes:{"MA65", "MF65", "FI65", "MC65", "MH65", "MB65"}}, ¬
{folderName:"Pr", prefixes:{"PR_"}}, ¬
{folderName:"To", prefixes:{"TM15", "TM11"}}, ¬
{folderName:"Wa", prefixes:{"WA35", "WA11"}}, ¬
{folderName:"Se", prefixes:{"SE_"}}, ¬
{folderName:"Mik", prefixes:{""}}}
tell application "Finder"
--set theHotFolder to ((path to pictures folder) as text) & "HotFolderDone"
set theHotFolder to folder "StudioA:Users:StudioA:Pictures:HotFolderDone"
--set foldericon to ((path to pictures folder) as text) & "Icons:Rejected Folder Done"
set foldericon to folder "StudioA:Users:StudioA:Pictures:Icons:Rejected Folder Done"
--set fakeTrash to ((path to home folder) as text) & "FakeTrash"
set fakeTrash to folder "StudioA:Users:StudioA:FakeTrash"
set a to alias "Scratches:Workings"
repeat with matrixItem in fileMatrix -- look for folder
set destinationFolder to (folders of a whose name starts with folderName of matrixItem)
if destinationFolder is not {} then -- found one
set destinationFolder to first item of destinationFolder -- only one destination
set theFolderName to name of destinationFolder
repeat with aPrefix in prefixes of matrixItem -- look for files
repeat with startFile in ((files of theHotFolder whose name starts with aPrefix) as alias list) -- move files
try
move startFile to destinationFolder
on error
activate
display dialog "File “" & (name of startFile) & "” already exists in folder “" & theFolderName & "”. Do you want to replace it?" buttons {"Don't replace", "Replace"} default button 2 with icon 1
if (button returned of the result) is "Replace" then
set {fileName, t_ext} to {name, name extension} of startFile
if exists file fileName of fakeTrash then -- and it also exists in the fakeTrash Folder.
set name of file fileName of destinationFolder to "this is a unique name" -- or whatever
set newName to my getUniqueName(fileName, t_ext, fakeTrash)
set movedFile to move file "this is a unique name" of destinationFolder to fakeTrash
set name of movedFile to newName
else -- not exists in the fakeTrash Folder.
move file fileName of destinationFolder to fakeTrash
end if
move startFile to destinationFolder
else -- "Don't replace"
if not (exists folder "StudioA:Users:StudioA:Desktop:Rejected Folder Done") then
set theLastFolder to duplicate foldericon to desktop
else
set theLastFolder to folder "StudioA:Users:StudioA:Desktop:Rejected Folder Done"
end if
delay 0.5
move startFile to theLastFolder with replacing
end if
end try
end repeat
end repeat
end if
end repeat
try
if (count theLastFolder) is 0 then delete theLastFolder
end try
end tell
to getUniqueName(theName, theExtension, someFolder)
check if someFile exists in someFolder, creating a new unique file name (if needed) by adding a suffix
parameters - theName, theExtension : a file name and his name extension
someFolder : a folder (finder item or alias)
returns : a unique name
set {counter, suffixes, divider} to {0, "abcdefghijklmnopqrstuvwxyz", "_"}
if theExtension is not "" then set theExtension to "." & theExtension
set theName to text 1 thru -((length of theExtension) + 1) of theName -- just the name part
set newName to theName & theExtension
tell application "Finder" to set theseNames to name of items of someFolder
repeat while theseNames contains newName
set counter to counter + 1 -- hopefully there aren't more than 26 duplicates (numbers are easier)
set newName to theName & divider & (item counter of suffixes) & theExtension
end repeat
return newName
end getUniqueNameI do not have the time to read through your whole script and give specific answers, but the general principle is fairly easy. You're moving with the Finder, so your move command is going to be of the form:
tell application "Finder"
move file xxxx to folder yyyy
end tell
For cross file system moves (which are as you point out actually duplications) just add a line after each move that sends the old file to the trash:
tell application "Finder"
move file xxxx to folder yyyy
delete file xxxx
end tell
the Finder has an empty trash command that you can use at the end of the script if you like.
One gotcha: because move has two different behaviors, the second code block will throw an error if you try to use if for a local move (it will move the file properly, then try to delete the file it moved, which is obviously no longer there). For clarity, I'd use duplicate rather than move for if you're working across file systems. That's what you're actually doing, and if you use the move command you may confuse yourself when you come back to look at the script a year down the road. -
Read two CSV files and remove the duplicate values within them.
Hi,
I want to read two CSV files(which contains more than 100 rows and 100 columns) and remove the duplicate values within that two files and merge all the unique values and display it as a single file.
Can anyone help me out.
Thanks in advance.kirthi wrote:
Can you help me....Yeah, I've just finished... Here's a skeleton of my solution.
The first thing I think you should do is write a line-parser which splits your input data up into fields, and test it.
Then fill out the below parse method, and test it with that debugPrint method.
Then go to work on the print method.
I can help a bit along the way, but if you want to do this then you have to do it yourself. I'm not going to do it for you.
Cheers. Keith.
package forums.kirthi;
import java.util.*;
import java.io.PrintStream;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.IOException;
import krc.utilz.io.ParseException;
import krc.utilz.io.Filez.LineParser;
import krc.utilz.io.Filez.CsvLineParser;
public class DistinctColumnValuesFromCsvFiles
public static void main(String[] args) {
if (args.length==0) args = new String[] {"input1.csv", "input2.csv"};
try {
// data is a Map of ColumnNames to Sets-Of-Values
Map<String,Set<String>> data = new HashMap<String,Set<String>>();
// add the contents of each file to the data
for ( String filename : args ) {
data.putAll(parse(filename));
// print the data to output.csv
print(data);
} catch (Exception e) {
e.printStackTrace();
private static Map<String,Set<String>> parse(String filename) throws IOException, ParseException {
BufferedReader reader = null;
try {
reader = new BufferedReader(new FileReader(filename));
CsvLineParser.squeeze = true; // field.trim().replaceAll("\\s+"," ")
LineParser<String[]> parser = new CsvLineParser();
int lineNumber = 1;
// 1. read the column names (first line of file) into a List
// 2. read the column values (subsequent lines of file) into a List of Set's of String's
// 3. build a Map of columnName --> columnValues and return it
} finally {
if(reader!=null)reader.close();
private static void debugPrint(Map<String,Set<String>> data) {
for ( Map.Entry<String,Set<String>> entry : data.entrySet() ) {
System.out.println("DEBUG: "+entry.getKey()+" "+Arrays.toString(entry.getValue().toArray(new String[0])));
private static void print(Map<String,Set<String>> data) {
// 1. get the column names from the table.
// 2. create a List of List's of String's called matrix; logically [COL][ROW]
// 3. print the column names and add the List<String> for this col to the matrix
// 4. print the matrix by inerating columns and then rows
} -
Rewrite process and remove the call to f-54 and replace with bapi proces
Hi Gurus,
Please help me to find the soultion.
The root cause of this continual problem is the design and use of BDC session for F-54. Is there a redesign possible with ECC6.0?
I wanted to rewrite the process and remove the call to f-54 and replace with bapi process.
if this is now possible in ECC 6.0
The benefit would be to better control what PO was used in the DP recoupment.
Thanking you,
Raju Singhireddy.Hi Balaji,
Check this BAPI
BAPI_QUOTATION_CREATEFROMDATA
BAPI_QUOTATION_CREATEFROMDATA2
BAPI_CUSTOMERQUOTATION_CHANGE
Regards
Arun -
Opening an existing .swf and removing the music?
I have a site that I've been asked to work on.
its joomla and each page has a .swf on it and it plays an annoying sound.
is there a tool that would let me crack open this swf and remove the music and put it back together again?
here's the page: http://agrithority.com/
thanks,You would have to find a Flash decompiler and use it to create an fla and then edit that fla to remove the sound.
Beyond the ability to make changes the question arises as to whether you have the right to do so. If you did not create this file then you probably do not own the rights to the file that would allow you to modify it. You should check with whoever designed the site to see what needs to be done in that regard. -
Automatically highlight the next message and remove the "unread" status
In my inbox on Ipad, when I swipe and delete a message or highlight the message and hit the delete icon in the upper right corner, it will automatically highlight the next message and remove the "unread" bullet next to the message. This is version 7.1. Is there a way tnot to have your messages marked as unread when you haven't read them yet?
You can hit the small flag icon and mark it as unread yourself.
-
Apple, why did you change my Keyboard and remove the enter key?
Hi all,
I had my new black MacBook delivered just before Christmas. The keyboard has changed from my previous Black MacBook (the one a colleague poured wine over and killed... grrr).
Apple have changed the look of the command key and removed the Apple logo (very sad), but more frustratingly have replaced the 'enter' key with another 'option' key.
I found the 'enter' key really useful, especially for pull down menu and really miss having one.
Does anyone know if there is a way to assign the new 'option' key to be an 'enter' key?
Cheers
Scott.I just received a new(refub) MacBook 2.2GHz today and was very disappointed to find the enter key missing. After selling my G4 PowerBook six months ago, I was so looking forward to having the convenience of being able to slap the enter key for dialog boxes with and submitting forms without having to move my hand from the trackpad. I hope that someone will come up with a way to replace the functionality of the missing enter key.
Which brings me to my next point- There has been a big oversight in the implementation of the MacBook's replacement of the Enter Key, which is to use the FN+Return keys. It seems that when using the FN key with the Return key, the system will ignore the Command key being invoked. I discovered this very quickly. Anyone who uses Apple Remote Desktop knows that in order to send a Unix command to a remote machine, you type the command in the 'send UNIX command' window, then hit Command+Enter to send the command. Return produces a carriage return, FN+Return does nothing, and FNCommandReturn does nothing. The only current work around is to use the track pad to the "Send" button and click, which really slows things down.
Maybe you are looking for
-
A New Year, a New Challenge! Become the FIRST BizTalk Guru of 2015!
Happy New Year! "Guru 2014" is so last year! The real glory is to be the first Guru of 2015! :D The birth of a new year, and a new hero? Or the stamp of authority from long established Guru leaders? The challenge is on, all eyes are watching, anyone
-
Raid Setup Guide 865/875 LSR/FIS2R Rev 1.04
On-Board Raid Setup MSI 865PE/875P Revision History Revision 1.0 (January 2004) - Original Raid Article Revision 1.01 (February 2004) - Reformatted text and fixed spelling/grammar Revision 1.02 (October 2004) - Added warnings to temporarily dis
-
Oh look - yet another error message...
I'd been using PCSuite successfully until they sent an upgrade...then my txt messages stopped being accessible from the browser - they appeared as just a generics "earth" icon with no time or date, and couldn't be opened, moved, or saved...on the adv
-
I need to use a projector in a meeting to have the participants view my iPad 2 screen. Looking at the description in the Apple store and the reviews posted there I have some questions that I hope someone can help me with. 1. According to The Apple St
-
Integrating MDG in Financial Self Service for Asset Master Data creation in CRM portal
Hello Experts, I have a requirement in CRM box. If we navigate to SAP menu we have Self Service -> Financial Internal Self Services. Then a portal page will open in browser. There we have link Master Data Services. In that link we have standard subli