Managing Custom Paper Sizes with the Epson 2000P

Hi,
I recently started using the iMac and after installing the software for the Epson 2000P found that I could not print a 13 x 44 image. I set up a custom paper size and when the page printed it only printed 18" of the image. I tried the Epson 1280 with the same set up and was able to get 22". I thought maybe the file was to large a cut it in half with no luck. I increased the memory allotment of the program as well and still no luck. I have emailed and called Epson support and can't get any answers from them so I thought I would check here at Apple. If you have any advice I would greatly appreciuate it.
Thanks
2 GHz Intel Core 2 Duo Mac OS X (10.4.10)

Hi,
Crystal Reports 2008 supports custom page sizes. You can set this in the Page Properties for the report in the Crystal Reports Designer, I'm not sure if you can set it in the SDK as well.

Similar Messages

Photosmart C410: How do I associate a custom paper size with the photo tray?

Our Photosmart 3310 recently broke down and I purchased a C410 to replace it. I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes. With the 3310, I had figured out a way to print the envelopes from the photo tray. While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
One of the reasons I got the C410 was for the photo tray. It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope. Well, unfortunately, that's what I've been doing. I select the photo tray in Word, but the printer goes right ahead and prints from the main tray. I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
My problem is that the software interface for the C410 is different than that for the 3310. I can't figure out how to associate a custom paper size with the photo tray. To test my theory this evening, I told Word that my envelope size was 5 x 7. The printer didn't hesitate to take an envelope from the photo tray. Of course the return address went into a dark void because the envelope is not 5 x 7.
The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets." The C410 only has printing shortcuts.
If anyone can help me, I'll be very grateful! I've probably spent hours trying to get this figured out, and I have no idea what to do.

Hi,
Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
You need to select right custom size from the application.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem Managing Custom Paper Size Using Epson RX500

Since updating my Mac to the latest version Yosemite, when I now try to Manage Custom Paper Size in the Epson print box via my Photoshop Elements 11, Photoshop crashes. Has anyone experienced this problem? If so have you found a solution please?

Hello Bridge. Thanks for the reply. I am not sure where the Elements Print dialogue is but, having come back to answer, I can see the "More like this" box on the right and viewing those posts confirms what you say. It would appear from one of the posts that Apple is aware of the problem and may be working on it. However, one of the posts opposite suggested using Print Preview to set the custom print size and print from there. I found this works for me. So, thanks again for your consideration. Regards. Brian.

Problem Managing Custom Paper Size Using Epson

Since updating my Mac to the latest version Yosemite, when I now try to Manage Custom Paper Size in the Epson print box via my Photoshop Elements 11, Photoshop crashes. Has anyone experienced this problem? If so have you found a solution?

Hello Bridge. Thanks for the reply. I am not sure where the Elements Print dialogue is but, having come back to answer, I can see the "More like this" box on the right and viewing those posts confirms what you say. It would appear from one of the posts that Apple is aware of the problem and may be working on it. However, one of the posts opposite suggested using Print Preview to set the custom print size and print from there. I found this works for me. So, thanks again for your consideration. Regards. Brian.

Photoshop crashes when i try to manage custom paper sizes through printer setting

i have recently updat my imac to Yosemite, now i cannot update my custom paper sizes without photoshop crashing, Any Idea's? The printer i have is a epson 4900

What version of Photoshop are you using? Have you installed all the updates?
And have you contacted Epson to see if they have updated drivers that work with MacOS 10.10?

Custom paper size with HP Officejet 7500A Wide Format e-All-in-One Printer

I am wanting to print on a paper size 12x18. I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer. Is there another driver which I can download which would allow me to enter custom paper sizes?

I am wanting to print on a paper size 12x18. I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer. Is there another driver which I can download which would allow me to enter custom paper sizes?

How do i select a custom paper size on the 6500A , specifics 18cmX26cm

I want to print on a specific paper size, 18cmX26cm. The suggestions from microsoft don't accuratly display my features or windows or the tabs that they say to click. Also your forums seem to mislead the same information. For the money I paid for this printer is not what I expected and very disappointed. The lack of info is appalling, and confusing and just down right frustrating, leading me to conclude that your all as crazy as I am for trying to do something over and over, and expecting different results.

Hi,
Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
You need to select right custom size from the application.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

OT Epson custom paper sizes saved to Epson driver

OS 10.4.11; Dual 2.0Ghz G5 PPC; Stylus Pro 10600
I'd like to transfer from one HD into another the custom sizes I entered into the Epson driver.
Can't find them; is this possible?
TIA

Hi JedK,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
Hope this helps, have a good one!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How to print custom paper size with borderless?

Hi, I want print in custom peper size (6"x13") and i want print with borderless, but the print properties dont have the options to select custom size, any idea how can I do this work? thanks.

Hi, Its specs says it supports: Left: 3.3 mm (0.13 inch)
Right: 3.3 mm (0.13 inch)
Top: 3.3 mm (0.13 inch)
Bootom: 3.3 mm (0.13 inch) and 12 mm (.47 inch) for the following list of papers: U.S. Letter
U.S. Legal
A4
U.S. Executive
U.S. Statement
8.5 x 13.0 inch
B5
A5
Cards
Custom-sized media
Photo media Source: http://support.hp.com/au-en/document/c03565793 Regards.

CS6 Problem with Custom Paper Sizes

When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

I use a pc therefor Windows and PC Photoshop. Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings. And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
I also wrote a script to tile image into a document for printing on roll paper and eliminate paper waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

Photosmart Duplex with Custom Paper Size

I've recently bought a Photosmart Premium C310a for a personal project where I needed a photo printer that could handle duplex printing and custom sized paper, which according to the spec this printer does.
However, when you try to do this the printer driver in Windows Vista tells me that custom sizing is not compatible with duplex printing, rendering the Photosmart Premium a large lump of plastic and wiring that I have no use for.
Has anyone got any ideas of how I can make this work?
Thanks,
Mark

Radlett wrote:
I am looking to print on 160mm x 160mm using 250 gsm paper. Any ideas of how I could do this or can you suggest a photo printer (or similar quality) that would print duplex using this paper?
Thanks,
Mark
OK, the paper weight is outside that "supported" for duplexing as shown in the user manual but it might work.
I do not have a c310a set up to test with but I tried with a c309a I have here. What exactly did you try? I set a custom paper size in the Printing Preferences, Features tab and then selected automatic two sided printing and it seems to work. Are you trying to print full borderless photo's in duplex mode? That is not supported and I do not know any way to make it work. It is also not supported (and will not work) to print with photo media selected and printing in duplex mode.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I get OS X to ask printer for custom paper size

I am printing postcards. These are 1/4 of a letter sheet, or 5.5" wide x 4.25" tall.
I have a commercial grade HP Laserjet 4350, and I've configured that size in its custom menu for tray 1 (the envelope feeder tray). The printer is happy.
I've also set a custom paper size in the MacOS, that I've called "Postcard Quarterpage" and I have that selected in the print dialog. In fact I made it default.
However, under Paper Handling, it says "Destination paper size: Suggested paper: US Letter" and this is greyed out. If I check "Scale to fit paper size" which I Do Not Want, then I can pick a variety of sizes. However my custom size is not in the list.
This happens on all applications, so it is definitely OS X Mountain Lion (latest patch).
Anyway, the upshot is MacOS requests US LETTER size from the printer, so the printer goes "Take this postcard stock out and gimme US LETTER". The printer can detect paper sizes. If I try to give it postcards anyway, it blows an error and won't print, which is what it should do.
How do I get OS X to tell the printer "Gimme 5.5x4.25" like I've instructed it?

Hi there Wolf!
I have a couple of articles here that I believe will help you out with your question. First, here is an article with some information on custom paper sizes:
OS X Mountain Lion: Manage custom paper sizes
http://support.apple.com/kb/PH10748
Note that in that article, it states:
Custom paper sizes aren’t available for some printers.
The reason for that is because this is controlled by the driver for the individual printer. You will want to make sure you have the latest version of the printer driver installed on your computer. More information on this can be found in the following article:
Printer and scanner software available for download
http://support.apple.com/kb/HT3669
It might also be helpful to reset your printing system to see if that will resolve the issue. More information on this process can be found here:
Mac OS X: How to reset the printing system
http://support.apple.com/kb/HT1341
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

Hi
I have a Konica Minolta magicolor 7450 laser printer that (since switching to mac from windows) is unable to print to Custom paper sizes (entered in the print dialog box from within photoshop CS3) and nothing will print from illustrator CS3 at all.
I have OS 10.5.2 with the 10.1 photoshop update, and the 13.0.2 illustrator update.
When I use to use windows xp & photoshop CS2 I didn't seem to have trouble with this function, but since jumping over to mac & CS3, I can't print on any paperstock other than the defult sizes listed (which it dose perfectly) - I've re downloaded & installed the printers driver, downloaded & installed a firmware update for the printer and tried printing with a network cable & usb cable - all with no luck. I've also tried entering in the custom paper size in the printers LCD panel & setting in as default but it still wants to print on A4 or A3 paper...
Any ideas out there would be appreciated!

so I've been pulling my hair out for 2 days & nights now trying to figure out why I couldnt print on custom paper sizes - I've just now hit the "help" icon in the print dialog box and found this:
"Creating a custom page size
If you want to print on unusual size paper, such as an odd-size envelope or card, you may be able choose the paper’s size from the Paper Size pop-up menu. To find the Paper Size pop-up menu, choose File > Page Setup, if available. Otherwise, choose File > Print.
If you can’t find the size you need, you can create your own custom paper size.
To create a custom page size:
Open the document you want to print.
Choose File > Page Setup, if it’s available. Choose Page Attributes from the Settings pop-up menu, and then choose Any Printer from the Format For pop-up menu.
Choosing Any Printer ensures that your document can print on any printer that supports the paper size you select.
If Page Setup is not available, choose File > Print.
If the Print dialog contains only two pop-up menus and some buttons across the bottom, click the disclosure triangle beside the Printer pop-up menu.
Choose Manage Custom Sizes from the Paper Size pop-up menu.
Click the Add button.
Type a name for the paper size.
Enter values in the Paper Size and Printer Margins field."
All I had to change was the "any printer" setting from my (konica minolta) printers name to "Any Printer"!! now my custom paper sizes are printing fine and dandy!! phew!!!!!!!!

How do I print on a greeting card in landscape when I can't save custom paper size?

I have a J6450 running on XP SP3 with the latest drivers and patches installed. I have greeting card stock measuring 6.5 by 10.0 inches and a Microsoft Word document with a custom paper size matching the that stock prints in landscape mode. The printer error is "Paper Mistmatch. Paper size or type is incorrect." I have followed the suggestions on the HP support page, changing the Print, Properties, Features options to show "Other greeting card", but can't define a custom paper size to match the stock. The Save option is not available. What do I need to do to make this work?

Here is a link to a HP document for adjusting several settings that may help with your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01824353&tmp_task=solveCategory&cc=us&dlc=en&la...
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

After installing Yosemite, my CS5 crashes when I try to set up a new custom paper size

I tried to set up a custom paper size with CS5 but my system crashes with "an unexpected system error has occurred". I have tried a reinstall of CS5 and also the latest Java update.
Eljay

First of all, trash and refresh your Photoshop preferences.
To re-create the preferences files for Photoshop, start the application while holding down Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here.
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Managing Custom Paper Sizes with the Epson 2000P

Similar Messages

Maybe you are looking for