Managing data connections manually

Hi,
I bought the new iphone4 with a time limited data connection contract. The contract let me use internet for 40 hours a month by using 15min. slots minimum for each connection. Now i recognized that the iphone connects often to the internet even when I dont want it.
I would use email, calendar and contact synchronisation with exchange via VPN by MANUAL data connection. That means, that I would enable and disable these connections by myself. Unfortunately this is not possible to do with only 2 clicks on the screen.
And so my question is: Is it possible to activate/disactivate data connection using an easy and fast tool? I have the latest ios installed.
sincerely yours
Dietmar

On your phone, Settings>General>Network>Cellular Data...on/off. That and Airplane mode are about it in the present OS. But, if you use Airplane mode, all radios are turned off, which means no phone service even though you can turn WiFi back on in settings.

Similar Messages

Excel Table with Data Connection Manual Text Entry Misaligned After Refresh

Greetings!
I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
out of alignment with the row it's supposed to be associated with.
Example
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
Item 2
Text entered for Item 2
Row 3
Item 3
Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
New Item 1.5
Text entered for Item 2
Row 3
Item 2
Row 4
Item 3
The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
Any thoughts on what would cause this?
Thanks in advance!

Yes, it is. I realized after posting the first time, that I'd assigned the question to the Visio forum. I wasn't sure how to reassign to the correct (Excel) forum, so I re-posted over there:
http://social.msdn.microsoft.com/Forums/en-US/b3bbe00c-94c0-48d4-bed9-fbd08d707b1d/excel-table-with-sharepoint-data-connection-manual-text-entry-misaligned-after-refresh?forum=exceldev

Excel Table with SharePoint Data Connection - Manual Text Entry Misaligned After Refresh

Greetings!
I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
out of alignment with the row it's supposed to be associated with.
Example
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
Item 2
Text entered for Item 2
Row 3
Item 3
Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
New Item 1.5
Text entered for Item 2
Row 3
Item 2
Row 4
Item 3
The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
Any thoughts on what would cause this?
Thanks in advance!

Hi Eric,
>>but it seems that by extending the table itself to encompass both the SharePoint-sourced columns and the additional columns, that an association would be created between all columns for a given row in the table, no?<<
From my understanding, the answer is no.
Another example:
I have an additional column named "Column2" and an external column named "ID" (see "before").
After I add a new record and refresh this table, Excel will keep the last row in "column2" and add an empty cell in the second last row. (See "After")
If I delete the eighth data and refresh this table, Excel will still keep the last row and remove the last second cell.
In your case, if you insert a new record in the middle of the data and refresh this table, Excel will synchronized the external data and add a new cell in the additional column in the second last row.
From my understanding, Excel will always change the second last row to suit for deleting or adding record.
Hope this helps.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Managing data connections (5800)

I'm looking for documentation on how to manage the data connections on my 5800. I presume the documentation would be similar on other s60 phones.
For example:
- Can I get applications to always connect silently to one of my previously configured wifi connections, but to prompt me when it seeks to use the phone data connection unless I have configured the application otherwise ?
- Can I tell which data connections are in use at any given time?

Hi, if you're worried about network connection, best set to always ask, then phone won't connect unless you OK it. For setting 'priority' go to settings-connectivity-destinations-internet-options-organise-change priority and set wlan to 1, network provider to 2 etc. Phone will always try and use wlan and when unavailable will move down the list.
Hope this helps.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Customize list using Info-path - Data Connection Error

We have an issue while customizing list using Info-path, we are configured a data connection inside the info-path the connects to SQL and it works fine.
then we decided to migrate it to another site under another web application on the same server, but it does not work, it fires an error as below:
A query to retrieve form data cannot be completed because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a
UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services
in SharePoint Central Administration.
An entry has been added to the Windows event log of the server.
Thanks & Regards Ahmed Amin

Under General Applications in Central Admin, go to the InfoPath Settings and Configure InfoPath to allow cross domain connections.
Regards Sergio Giusti 
http://sergioblogs.blog.co.uk Whenever you see a reply and if you think is helpful, click " <img alt="Alternate Text" src="http://social.technet.microsoft.com/Forums/getfile/179394" style="width:12px;
height:12px"> Vote As Helpful". And whenever you see a reply being an answer to the question of the thread, click " <img alt="Alternate
Text" src="http://social.technet.microsoft.com/Forums/getfile/179395" style="width:12px; height:12px"> Mark As Answer".

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

Error when click Manage in Business Data Connectivity Service Sharepoint 2013

Dear all,
In Sharepoint central administration, I click manage service applications. Then, I click New > Business Data Connectivity Service. After create new Business Data Connectivity Service, when I click Manage to manage this new Business Data Connectivity Service,
there is error "Cannot complete this action as the Business Data Connectivity Shared Service is not responding. Please contact your administrator." In event viewer, there is error ""The BDC Service application is not accessible. The full
exception text is : The HTTP request is unauthorized with client authentication scheme 'Negotiate'. The authentication header received from the server was 'NTLM'.
I have tried to delete and create the BDC Service application, but it still did not work. I have tried to restart BDC Service and do iisreset, but it still did not work.
Please help. Thank you.
Best regards,
Johanna

Hi,
According to your post, my understanding is that you get an issue about the Business Data Connectivity Service.
To quickly and accurately find the issue, I recommend you can check the event log and ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Excel 2013 data connection to SharePoint list - charts won't update unless i manually refresh

I have a list called 'donations', and a connected workbook stored in an SP Document Library. On my sitepages homepage, I put an excel web part connected to a chart called "Total Donations".
I'm storing the Data Connection file on a Windows shared drive and I've given my Excel service account R/O to that drive. I'm using the Secure Store Service for my data connection, and it's refreshing data (but only when I open the Excel document).
I think this is because I've set the data connection properties to 'Enable background refresh', and 'Refresh data connection when opening', and 'refresh this connection on Refresh all'.
When I do a refresh from the web part on the home page, nothing updates :( Anyone want to point me in the right direction? I was going down the rabbit hole on PowerPivot services (thinking cannon to kill a fly), but couldn't find anything relating
to this particular use case.
P.S. I don't want to use the 2010 Chart Part because it's a POS.
Anyway, any direction would be helpful. Thanks.

Did you try this
http://www.sptechcon.com/news/sharepoint-dashboard-excel

Some data connections only work if security prompts are manually clicked

I am currently working on a PO form for our company and have run into a bit of a snag. I have one one database with two tables that populate a list of vendors and a list of PO #'s.
On the form is a Get PO button that connects to the databse, gets the first available PO # that is available, updates the record to in use and addes a unique ID # (generated off the curren time of when the button was clicked) and then does another connection to the same database to get the PO where the # = to that of the unique ID.
Here is my problem. With the data connection, you get those prompts about this file is attempting to access the following database. If you click yes to them (first when the doc opens - two more come up when clicking the Get PO button) the form works exactly as intended. No problems
Now if you check the box to remember this choice, and click yes to any of them, the PO # no longer gets displayed in the box. The database is being updated properly, but the subsequent connection with the select statement does not work.
I have added the files as trusted sources with the same results. The only way the database is update and the number is displayed is if all data connection prompts are clicked yes each and every time.
Any help would be appreciated. If it is needed I can update this post with the code I am using, but I am thinking this is more of a settings issue somewhere than it is with my code.
Thanks
Brian

It looks like I figured out the cause, and it only sort of had to do with the security prompts. Apparently, the second connection was occuring before update was completing in the access database. The only reason it would work when clicking the prompts was it allowed an extra second or so for the update to happen, then run the check to get the next number. I somewhat adjusted for this by putting a timeout in the code, which I dont really like, but even a delay of 500 milliseconds makes it work.

Managing data source connections inside an Excel workbook for deployment reasons

Hi,
with a certain frequency, I use Excel to show SQL Server data, or SSAS data, etc. in tables, pivot tables, ...
So, a single Excel workbook can contain more connections and ofter a same connection is used.
When an Excel is deployed to a prod environment from a test environment an issue it to update each data source connections by specifing the prod server and/or the prod instance. To avoid to accomplish the boring task to change each single connection,
is it possible to perform it in a more simple or automatic manner?
Any ideas, please?
Thanks

Hey pscorca,
When you deployed Excel files to a product environment, why did you need to change the data source? Did you move SQL server DB and SSAS DB to the product environment too?
And when you click Data->From SQL Server/From AS ,then Excel should create a Office data connection file which is usually saved in: C:\Users\Username\Documents\My Data Sources . If you have multiple Excel files need to use the same connection,
you can choose the Existing Connections, then select the odc file. If you want to change your connections, you just need to Edit the .odc file.
Wind Zhang
TechNet Community Support

Slow/non-existent data connection on 3GS/iOS 4.0.1

I have been a happy 3GS user since last December. About three days ago, I synced to iTunes and installed the latest software update, to iOS v4.0.2. Since then, whenever I try to access any web page in Safari, it just sits there for a while trying to access the page before eventually coming up with a message that it was unable to access the web page "because the server stopped responding". The same happens if I try to use the data connection via another app (e.g. Facebook). I should add that everything works fine if I connect via WiFi.
I did manage to get on the web yesterday evening when I was in a city centre area with five bars of 3G signal strength, but even then it took ages to load a web page. I have always had between about two and four bars of signal strength at home, and this has always been sufficient to load web pages reasonably quickly.
I usually use the 3G data connection several times a day, and have never experienced this problem until now. I've just got off the phone with O2 technical support – they asked me first to reset network settings and then reset all settings, but neither of these made any difference. They left me with two suggestions: go to an o2 store and ask them to try my SIM card in a different handset (I don't have much faith in this working), or do a factory reset/restore via iTunes. I'm loathe to do this unless absolutely necessary, as I guess it means losing all my data and having to resync everything from scratch.
Is anyone else experiencing this problem? Any suggestions other than what the o2 guy said? Is there any way I can get back to 4.0.1, which worked fine?
Thanks in advance,
Rob

Wow, our responses are starting to get long.
robgrayson wrote:
actionmarker wrote:
It's a pity he didn't (or wouldn't) change the SIM. It probably took him longer to explain to you that he didn't need to test the SIM that it would have take to set up a new SIM and test it.
So unfortunately, you still don't know for certain that it's not a SIM issue.
I agree it's a pity. I really wanted to be eliminate this as a possible cause, but I couldn't make the guy do it.
Maybe try another store, or do it over the phone and get them to send you one out?
I did a full restore – and incidentally discovered that the backup I made before applying the 4.0.2 OS update was not available to restore – I'm guessing it may have been corrupted or something. So I've had to revert to a backup that was saved in June, which is a bit of a pain. Anyway, the restore has changed nothing in terms of connectivity – with 3 bars of 3G signal, no web page will load – I just get the spinner in the status bar at the top of the screen, and eventually a message saying that the server has stopped responding.
Did you restore to 'new' or tried to the backup? You need to try it to 'new' as this erases all previous settings.
I restored it to the backup. I guess I need to restore it to new – which is a pain because it means I then have to manually reset any settings for mail accounts, etc.
You need the restore to 'new' so you have a clean phone, test in internet connection with nothing added and see what happens.
Personally I don't particularly like the way iTunes backs up. It's probably fine when this are all good, but when testing or trying to fix issues, I find it a bit limited.
All the Backups on your Mac go to this location;
/Users/[username]/Library/Application Support/MobileSync/Backup/
The issue I have with it is that in the backup folder, some of the files are overwritten each time that a backup occurs, making only the last backup available for restoring.
Yes, I find that pretty annoying to. I've just lost two months' worth of text message history because of it.
My work around for this is to copy the complete backup folder then in the copied folder I open the Info.plist file with TextEdit and edit the Device Name string by adding the date. When you then open iTunes and try to restore from backup, multiple backups are displayed.
You said you copy the entire folder before editing the Info.plist file. I presume you put the copied folder in the same location as the original?
In the backup folder, there is a folder with a big long alphanumeric name. Make a duplicate of this and leave it in the backup folder, so there is the original folder and copy of original folder. then edit the info file in the duplicate.
Once done, open itunes without the phone connected and go to iTunes > Preferences > devices and you should see your extra backup appear in the list there.
When you edit the info file change the following line:
+<key>Display Name</key>+
+ <string>[robgrayson]’s iPhone 20100511</string>+
I add a date at the end of the line. This line is then displayed in iTunes as the name of the backup
I also set iTunes to not automatically sync when the iphone is connected. This give the control back to me of when and how often I backup.
Yes, I changed this setting yesterday too.
Do you use Time Machine to back up your Mac? If so, you could restore the backup location on your Mac to before you did the restore and bring back you most recent backup that way.
Yes, I do use TM – I've been using it for a couple of years but have never actually had to restore anything. Just to be clear, I suppose you mean restore the backup folder from before I did the iOS upgrade, and then restore my phone from that?
How about this: if I do a restore from new first and see if that makes any improvement, do I then have an option of applying a dated backup (or would I have to go through the whole restore process again in order to do so)?
Yes, Navigate to the backup folder location, open time machine and restore to yesterday or when ever the last back was.
Duplicate the backup as above as a precaution.
Check iTunes recognises it. (make sure iTunes is closed when you are adjusting the backup files.
Restore to 'new' and check the phone. If it all is OK and working, its probably something in the backup and you don't want it back on your phone, and you will have to manually restore everything.
So unfortunately, you don't seem to be any closer to resolving the issue. Let us know if you want any more help, or alternately how you go with Apple.
I may try restoring from a previous backup via Time Machine, as you suggested. (This should also give me back my lost text messages.) There are also rumours that iOS 4.1 will be released today, so I may give that a try first.
Thanks once again for your very helpful suggestions.
If I were you, I would try to get the phone working before you worry about 4.1
Message was edited by: actionmarker

Data Connection to MS-SQL using Windows Auth from untrusted machine

We have an Excel Spreadsheet that uses a Data Connection to a MS-SQL database. The database server is joined to our domain, and Windows Authentication is enabled.
Here is a sample of the connection string (with revealing info obfuscated):
Description=DataConnection;DRIVER=SQL Server;SERVER=10.x.y.z;UID=domain_user;Trusted_Connection=Yes;APP=Microsoft Office 2010;DATABASE=DatabaseName
And the Authentication Settings are set to "Windows Authentication"
This works perfectly fine from a domain-joined / trusted machine. It doesn't even ask for credentials; it just works flawlessly when I hit Refresh.
It will work from a non-domain / un-trusted workstation, if I use SQL Authentication. But we are trying to move away from that.
Likewise, it will from a non-domain machine using Windows Authentication if I use "runas" to launch Excel with domain credentials, as follows:
"runas /netonly /user:domain\user %path-to-excel%\excel.exe"
However, using "runas" is a kludge, and our employees will almost certainly have issues... even if I were to create batch files to help automate it.
When launching Excel normally (without using "runas") from a non-domain machine, it gives this error when I hit Refresh:
Upon hitting OK, I have the option to un-check "Use Trusted Connection" and manually enter a user/password. I put in a valid user that would be able to connect fine from a domain-joined machine, or that worked fine using "runas".
This is the error it gives with that:
At this point, I have not a clue what to do to get Excel to successfully connect with domain credentials from a non-domain machine.
Ideas?

Hi ltwally1,
From your description, you want to connect to non-domain machines using domain credentials. Based on my research, you can use the
ShellRunAs utility to achieve your requirement , it provides functionality similar to that of RunAs to launch programs as a different user via a convenient shell context-menu entry.
Reference:
How to Run Programs as a Domain User from a Non-domain Computer.
However, if you still encounter issues by using ShellRunAs utility, you can consider to use the Credential Manager built into Windows. For more details, please review
this similar
blog.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

N8: Data connection is always on

since the last FW update the data connection is always on is connects automatically after manually disconnection it. It is creating around 200 to 300MB of traffic per day.
Checking in the connection manager it is the App Messaging.
Checking with the App "DataWatch" the application neasserver creates the traffic.
It could be somehow linked with the Exchange Mail client?
Can anybody send me a hint how to switch back to a normal check every 15min as it is configured.
Thx

Hello chrisscn43, try this go to settings>connectivity>settings>data use in home country(set this to always ask). Again in the same thing go to destinations and then options>default connection(just create a new access point and set this as default in this way the connection won't take place.). Again check this too in the home screen tap options>widgets to online/offline mode. Check whether its shown as widgets to offline mode. If so then it means that your home screen widgets are in online mode and data transfer is taking place. Touch that so that the option changes to widgets to online mode. Try and reply.
Nokia C7

Business Data Connectivity Store is currently unavailable

Hello,
A couple of months ago i started a thread regarding Business Data Connectivity Store and that our tenants could not manage External Content Types via SharePoint Designer. I cannot reply to this thread anymore, so Im starting a new since the issue is still present.
https://social.msdn.microsoft.com/Forums/office/en-US/dbbfa362-d756-478d-87c8-4ee5831d5827/business-data-connectivity-metadata-store-is-currently-unavailable-for-users-but-not-administrator?forum=sharepointcustomization#dbbfa362-d756-478d-87c8-4ee5831d5827
A few updates:
- Were having a multi tenant setup of SharePoint 2013 so the Business Connectivity Data Service is partitioned and the permissions is managed by each site collection administrator at the the Tenant Administration site (usually located at <site-url>/admin/).
- The Active Directory administrator can log in to each site via SharePoint Designer (SPD) and manage external content types so there is nothing wrong with the version of SPD or bindings for the site collections. We are using SNI for SSL certificates on a single
IP but this is not a problem.
- We have logged on to the Tenant Administration site with for a tenant site collection and added users to the Metadata Store so now we can manually import a BDC Model to the site, but we are still not able to use SPD to manage this. Our tenants demand this
to work.
How can we get further with this issue?

Hi Anders,
Based on your description, I recommend to verify the things below:
1. Make sure that the users are added to the Set Metadata Store Permissions.
2. Clear SharePoint Designer cache and then check the results.
http://www.c-sharpcorner.com/UploadFile/sagarp/how-to-clear-your-sharepoint-designer-20102013-cache/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Managing data connections manually

Similar Messages

Maybe you are looking for