Managing Data
Ive had very little issues with the iPhone so far, but today something minor happened but there doesn't seem to be an easy way to fix it; This is a big deal.
I was syncing some videos when iTunes told me the "disc" (iPhone) has timed out or something to that effect. This happened before but it didn't leave 500+ megs of unusable, undeleteable, "other" data like it did this time.
A restore is out of the question for me. There has to be a better way to manage this "other" data. I understand this is stuff like mail cache, safari data etc... but what about when a sync goes wrong (for no reason) and iTunes eats up a chunk of your memory and wont let it go?
Copied from the iPhone user guide.
When you connect iPhone to your computer, settings on iPhone are automatically backed up to your computer. You can restore this information if you need to—if you get a new iPhone, for example, and want to transfer your previous settings to it.
Restore or transfer settings
Do one of the following:
Connect a new iPhone to the same computer you used with your other iPhone, open iTunes, and follow the onscreen instructions.
Reset the data on iPhone. From the Home screen choose Settings > General > Reset, then choose Reset All Settings, “Erase All Content and Settings,” or “Reset Network Settings.” Then connect iPhone to your computer, open iTunes, and follow the onscreen instructions.
Since all iPhone data and settings are backed up to iTunes during each sync process, you shouldn't lose any settings, etc. from the last sync if you follow the onscreen instructions properly when restoring from the iTunes backup file.
Similar Messages
-
Extraction and loading of Training and Event Management data (0HR_PE_1)
hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRBHi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi. -
Training and Event Management Data Load
Hello Team
Would appreciate if any of you can advice on how to load Training and Event management data. I think its stored in HRP tables.
I'm working on an upgrade assignment.
ThanksHi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi. -
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
Getting Training and Event Management Data using IT0031
Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi. -
Service Manager data warehouse management server Installation fails
Hi there,
In Virtual Machine Windows Server 2012 R2 Standard with my user being a Local Admin and SQL Admin. I tried to do a Service Manager data warehouse management server
first installation I am facing the following image as error:
In the event viewer I get the following error:
"Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211
The arguments are: -2147024809, The parameter is incorrect."
In the Setup log, some of the errors are:
WixRemoveFoldersEx: Entering WixRemoveFoldersEx in C:\Windows\Installer\MSI35E.tmp, version 3.7.1224.0
WixRemoveFoldersEx: Error 0x80070057: Missing folder property: PSCONFIGFOLDER.A591E3B4_D228_431D_BF89_99D52C8FFB76 for row: wrf4582BC4C5CC47B1D2380408CD7A752DC.A591E3B4_D228_431D_BF89_99D52C8FFB76
CustomAction WixRemoveFoldersEx.A591E3B4_D228_431D_BF89_99D52C8FFB76 returned actual error code 1603 but will be translated to success due to continue marking
CAStartServices: CAStartServices was passed . OMCFG
CAStartServices: Checking if service already started. OMCFG
CAStartServices: Attempting to start service. OMCFG
CAStartServices: StartService failed. Error Code: 0x8007042D.
ConfigureSDKConfigService: CAStartServices failed, trying again.... Error Code: 0x8007042D. OMCFG
Action start 17:47:05: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
MSI (s) (EC!4C) [17:47:05:483]: Note: 1: 2711 2: MOMGateway
SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
I have checked the following post but it did not help me:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c42bb04d-a51e-4037-a8a3-37d714d6faac/scsm-management-server-installation-fails?forum=systemcenterservicemanager
Could you please help me with this issue?
Thanks a lot,
MHi,
Sorry I cannot post the full log. I have found also these errors in the log:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: There is no previous serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\InstallationAccount
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSMDWadmins
RegisterSdkSCP: Error: Access is denied.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "D:\Program Files\Microsoft System Center 2012 R2\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
Thanks for your reply. -
How to manage data in a custom table added in SBO?
Hello,
I'm developing a addon for one client that needs to control an aditional step, after each Invoice is posted.
Since SBO does not allow me to add additional fields to Invoice header table (OINV), I thought to add a custom table to SBO database to control the process for each Invoice (simple table with 2 columns: DocNum to hold the Invoice number, and Status to keep track if the Invoice was processed or not).
When I added a Custom Table in SBO and checked the table definition in SQL Manager, I found that SBO added automatically 2 new columns (Code and Name).
Since the PK is defined at Code column (and not the DocNum has I wanted), I found that it not very handy to manage data (insert, delete & update) with this table definition.
I tried to find a DI object that could manage easily the data of this table type but had no sucess.
Then I thought in adding the custom table directly in SQL Manager, and manage it directly with Recordet objects.
However this seems not a standard process to manage data since it interacts directly with the DBMS, which can be dangerous...
Is there any way or DI object to manage this custom tables added in SBO?
Thanks all!
Manuel DiasHi Manuel,
What do you mean by SBO does not allow me to add additional fields to Invoice header table (OINV).
Have you tried it add a UDF to OINV,if so what is the exception you got while adding.
If you Have not tried Use the following code to create.
Dim oUserFieldMD As SAPbobsCOM.UserFieldsMD
oUserFieldMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
If (Not isColumnExist(TableName, ColumnName)) Then
oUserFieldMD.TableName = "OINV"
oUserFieldMD.Name = ColumnName
oUserFieldMD.Description = Description
oUserFieldMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
oUserFieldMD.EditSize = Size
(objUserFieldMD.Add() )
End If
if the field is added successfully.
Then open the Invoice screen and goto View menu and click on user defined fields then it will show you one form which contains the field you added,
You can access this field using DIAPI of Invoice object
regards
Vishnu -
Service manager console can't connect to Service manager data warehouse SQL reporting services
When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND. -
Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH -
Request status in Manage data targets
Hi
I have an ODS, which loads from a flat file. When I load data, during activation I am getting error on subsequent processing stage with status 5. What is interesting to me is, request is available for reporting icon is turned on, but I am seeing a status RED on Manage data targets. Even if I try to change manually the status to green as I am seeing the data, it didnot allow me. The error I am seeing on details tab of monitor is as shown below..
Activation of data records from ODS object ZQM_O55 terminated
System error occurred (RFC call)
Record mode Y unknown (data record REQU_3ZRQHGCF4GHOFNNP818446N3F/000001/150), activation failed
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 incorrect with status 5 in rsodsacstreq
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Eventhough it says activationt terminated with errors, how it got the icon on request for reporting option on? How to correct this issue? What am I missing. when does the record mode Y record will be created? Any help would be highly appreciated.
Thanks
PandiriHi!
I had a similar problem, check your file and ods definition, maybe it is not correct.... and before you load replicate datasource and re-activate the transfer rules.....
I hope this can help you. -
Which table are Demand Management data (MD61) are stored?
Hello guys.
I need to know in which table demand management data from (MD61, 62 and 63) are stored?
Also I need to know if there is some tips/rules to prepare a load from a file to come from Excel spreadsheet?
Is there any BADI or BAPI to load these information directly into the table?
Just for information: My current client doesn't use SAP yet. It's being planned to make the implementation in the middle of the next year...besides they use SAP in other plants around the world...
The main idea is to use MRP from SAP to get the suggestion for purchase requisitions and also planned orders and proceed the production and purchase activities in the legacy....
Please give me some instructions.
Thanks in advance.
Harlen Pinheiro
SAP PP
BrazilHello Harlen
This information is stored on tables PBED and PBIM.
You can use BAPI BAPI_REQUIREMENTS_CREATE to load data to demand management.
Please also take a look on the following document before opening this kind of thread:
Landing page for new users in SAP PP - ERP Manufacturing - Production Planning
BR
Caetano -
Management Data Warehouse Data Collection fails due to login failure
Hello,
I am trying to set up a Management Data Warehouse on a server other than the one I want statistics of. Unfortunately, each upload fails because the data collector upload job cannot log onto the warehouse server. For some inexplicable reason the process is trying to log on using domain\serverName. Obviously no such user exists, and the process fails. Below is the error message I see in the logs:
Description: An error occurred with the following error message: "An error occurred while verifying the result set schema against the output table schema. The data collector cannot connect to the management data warehouse. : Login failed for user 'domain\server name$'.".
Any help would be greatly appreciated.
Thanks,
Zacharyhttp://technet.microsoft.com/en-us/library/bb677211.aspx says
The data warehouse is installed on a different computer from the data collector. Probable causes are network connectivity problems or an unavailable host server. This error only affects upload packages.
Handling: Because there is no advance notification about a server shutdown, this error cannot be anticipated and handled automatically. The error is logged and after a brief interval, the upload is restarted. After four unsuccessful upload attempts, the collection set is disabled and its state is written to the execution log.
Note:
Any data that is collected while the collection set is running is kept and accumulated. If the upload package can connect to the data warehouse, the accumulated data is uploaded.
Blog: http://dineshasanka.spaces.live.com -
Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wallHi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
Campus Manager Data Collection always Idle
Hello,
Every time I start Campus Manager Data Collection, I get a window "Notified server to run Campus Data Collection" but status always stay Idle (not running).
LMS 3.2
Campus Manager 5.2.1
Thanksmost likely you are hitting the following bug CSCtd49439
-
What are the Disadvantages of Management Data Warehouse (data collection) ?
Hi All,
We are plan to implement Management Data Warehouse in production servers .
could you please explain the Disadvantages of Management Data Warehouse (data collection) .
Thanks in advance,
Tirumala
>We are plan to implement Management Data Warehouse in production servers
It appears you are referring to production server performance.
BOL: "You can install the management data warehouse on the same instance of SQL Server that runs the data collector. However, if server resources or performance is an issue on the server being monitored, you can install the management data warehouse
on a different computer."
Management Data Warehouse
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
The database that provides the data to this document has generated an error.
Cause
Details about the error are provided in the section of the message indicated
+by the field code: .
Contact your BusinessObjects administrator with the error message
Action
information or consult the documentation provided by the supplier of the
database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
CheersHi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
+ODBC_HOME="$odbc"+
export ODBC_HOME
also
# setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
# mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
. "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
if [ x`echo $- | grep "u"` != "x" ]; then
set +u
U_FLAG=1
fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
if [ -f "$setup/boconfig.cfg" ]; then
HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
export HKEY_LOCAL_MACHINE
fi
BOBJE_ENV_SOURCED="true"
export BOBJE_ENV_SOURCED
BOBJEVERSION="12.0"
export BOBJEVERSION
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -Sn `ulimit -Hn` # max file descriptors
ulimit -S -c `ulimit -H -c` # max core file size
ulimit -S -d `ulimit -H -d` # max data segment size
ulimit -S -f `ulimit -H -f` # max file size
ulimit -S -s `ulimit -H -s` # max stack
ulimit -S -t `ulimit -H -t` # max CPU time
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
case X"$SOFTWARE" in
XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
XAIX) SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
XHP-UX)
SOFTWARELC="hpux";
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHAREDLIBSUFFIX=".so";
else
SHAREDLIBSUFFIX=".sl";
fi
CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
esac
export SOFTWAREPATH
export SOFTWARE
export SHAREDLIBSUFFIX
export CB1LIBSUFFIX
export CB1SYMLINKLIBSUFFIX
if [ "$SOFTWAREPATH" = "" ]; then
echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
exit 1
fi
if [ -d "$BOBJEDIR"/jdk ]; then
JAVA_HOME="$jdk"
export JAVA_HOME
fi
JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
fi
export JAVA_OPTS
if [ -d "$Dashboard_Analytics_120" ]; then
AAHOME="$Dashboard_Analytics_120"
export AAHOME
fi
WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
export WCSDIR
WCSBINDIR="$bin/"
export WCSBINDIR
WCSCOMPONENTDIR="$components/"
export WCSCOMPONENTDIR
BINDIR="$enterprise120/$SOFTWAREPATH/"
export BINDIR
LIBDIR="$enterprise120/$SOFTWAREPATH/"
export LIBDIR
PLUGINDIR="$enterprise120/packages/"
export PLUGINDIR
PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
export PLUGINDIST
LOGDIR="$append the new valuelogging/"
export LOGDIR
if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
else
BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
fi
export BOE_LOGGER_ENVIRONMENT
SCRIPTDIR="$enterprise120/generic/"
export SCRIPTDIR
JAVASCRIPTDIR="$setup/jscripts/"
export JAVASCRIPTDIR
MACHINENAME=`uname -n`
export MACHINENAME
removeUTF8SpecificsForKorean
STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
export STRIPPEDMACHINENAME
if [ x"$BOBJEUSERNAME" = x ]; then
BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
export BOBJEUSERNAME
fi
restoreUTF8SpecificsForKorean
DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
export DEFAULT_REGFILE
REGFILE="$BOBJEDIR"data/.bobj
export REGFILE
BOE_REGISTRYHOME="$REGFILE/registry"
export BOE_REGISTRYHOME
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
ODBC_HOME="$odbc"
export ODBC_HOME
the PID file location
PIDDIR="$BOBJEDIR"serverpids
export PIDDIR
SQLRULEDIRECTORY="$LIBDIR"
export SQLRULEDIRECTORY
PATH="$BINDIR:$crpe/xvfb:$PATH"
export PATH
CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
export CRPEPATH
MWHOME="$mw/"
export MWHOME
BOBJEXVFBPATH="$xvfb/"
export BOBJEXVFBPATH
MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
export MWUSER_DIRECTORY
MWRT_MODE="professional"
export MWRT_MODE
MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
MW_XVFB_EXE = Name of the Xvfb exe.
Default is 'Xvfb'.
MW_XVFB_DAEMON = Name of the XvfbDaemon exe.
Default is 'XvfbDaemon'.
MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
Default is 5222.
MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
Default is Local host.
MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
Default is '5'.
MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
Default is '1'.
MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
Default is 'SecurityProfile'.
MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
Default is undefined.
MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
Default is undefined.
MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
export MWREGISTRY
MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
export MWCORE_PRIVATE_DATA
if [ -f "$MWHOME"setmwruntime ]; then
. "$MWHOME"setmwruntime
fi
MWNT_OLE_DOCS=true
export MWNT_OLE_DOCS
MWPRINTER_DPI=600
export MWPRINTER_DPI
MWVISUAL_CLASS="TrueColor"
export MWVISUAL_CLASS
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
MWTHREAD_STACK="200000"
else
MWTHREAD_STACK="FA000"
fi
export MWTHREAD_STACK
MWFONT_DIR_PATH="$fonts/"
export MWFONT_DIR_PATH
MW_XVFB_DAEMON_FONT="$misc/"
export MW_XVFB_DAEMON_FONT
XAUTHORITY="$xvfb/.Xauthority"
export XAUTHORITY
MWDEBUG_LEVEL=0
export MWDEBUG_LEVEL
MWINVISIBLE_DISPLAY=1
export MWINVISIBLE_DISPLAY
MWNO_SIGCHLD_IGNORE=1
export MWNO_SIGCHLD_IGNORE
MWLOOK=motif
export MWLOOK
MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
export MW_XVFB_DAEMON_PROFILE
MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
export MW_XVFB_DAEMON_IGNORE_DISPLAY
if [ "$SOFTWARE" = "HP-UX" ]; then
MW_XVFB_DAEMON_XVFB=10
else
MW_XVFB_DAEMON_XVFB=5
fi
export MW_XVFB_DAEMON_XVFB
MWNO_FILE_LOCKING=true
export MWNO_FILE_LOCKING
MWNO_SIGNAL_CATCHING=true
export MWNO_SIGNAL_CATCHING
RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
export RASHOME
LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
if [ "$SOFTWARE" = "AIX" ]; then
LIBPATH="$LIBRARYPATH:$LIBPATH"
export LIBPATH
if [ x"$MALLOCMULTIHEAP" = x ]; then
CRConfig env variable for DCP
MALLOCMULTIHEAP="considersize"
export MALLOCMULTIHEAP
fi
RT_GRQ=ON
export RT_GRQ
LDR_CNTRL=IGNOREUNLOAD
export LDR_CNTRL
AIXTHREAD_GUARDPAGES=1
export AIXTHREAD_GUARDPAGES
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -S -m `ulimit -H -m` # max memory
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
AIXTHREAD_SCOPE="S"
export AIXTHREAD_SCOPE
Version=`uname -v`
Release=`uname -r`
if [ "$Version" -gt 4 ]; then
CORE_NAMING=ON
export CORE_NAMING
fi
AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_MUTEX_DEBUG
AIXTHREAD_COND_DEBUG=OFF
export AIXTHREAD_COND_DEBUG
AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG
elif [ "$SOFTWARE" = "HP-UX" ]; then
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
else
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
fi
export SHLIB_PATH
MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
export BOE120_HP_MEMWIN_ID
fi
if [[ -x "/usr/bin/setmemwindow" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
fi
fi
export CE_CMDLINE_PREFIX
fi
export MARENA_OPTS=1:8
export MCACHE_OPTS=100:8:0
elif [ "$SOFTWARE" = "Linux" ]; then
LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
fi
CRCONFIGFILE="$java/CRConfig.xml"
if [ -f "$CRCONFIGFILE" ]; then
CRConfig11="$CRCONFIGFILE"
export CRConfig11
fi
if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
if [ x"$MW_TMPDIR" = x ]; then
if [ ! -d "$BOBJEDIR"/tmp ]; then
mkdir -p "$BOBJEDIR"/tmp
fi
MW_TMPDIR="$BOBJEDIR"/tmp
export MW_TMPDIR
fi
Comment this out to turn off custom Solaris memory allocator
if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
LD_PRELOAD="libhoard.so.1"
export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
export LD_LIBRARY_PATH_64
fi
setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
fi
call env.sh from sub-directories (presumably from add-on installs)
for dir in "${BOBJEDIR?}/setup"/*
do
if [ -r "${dir?}/env.sh" ]; then
. "${dir?}/env.sh"
fi
done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
if [ "$U_FLAG" = 1 ]; then
set -u
fi
fi
Maybe you are looking for
-
Windows 8 .1 black screen after login with cursor
after login in pc i get a black screen and a cursor i can do nothing please help me i updated windows 8 to windows 8.1.
-
Accidentally Shot 1920 x 1080, 60i
Shot some footage today using two DSLR cameras. One was incorrectly set to 1920 x 1080 60i and when I imported into FCP, the video is not smooth. tried exporting it and got the same result. The other video was shot 24fps. I brought a 60i clip into th
-
Need urgent help on issue "An unknown CSS error occured" Hyperion Essbase
Hi guys I am facing an issue while configuring Essbase 9.3.1. Everytime i tried to register Essbase(Server1) with Shared Services(Server2), i.e at the point where we enter Shared Services server, port, username, and password i am getting the followin
-
Difference between ALV and Table control
Hi folks, i want to know the major differences between AlV and table controls. i know that table control is designed in screen painter, but i want to know the major diff between Table control and ALV. helpful answers will be rewarded. Regards, Naveen
-
Can we perform two actions with one button with two clicks one after other?
Sir, can we perform two actions with one button with two clicks one after other? I want that when I click an Add Button first time it add data to the database and when I click again this button it clear the form data to empty fields. Regards Tanvir