Managing existing keywords with Controlled Vocabulary

Hi, my photos (10,000 RAW/JPG's) were previously keyworded in another application. I just imported David Rieck's Controlled Vocabulary keyword file into Lightroom 1.1 and now I have a mess of keywords.
Any suggestions on how best to mange the keyword list? I have duplicate keywords - the ones I keyworded before were non-hierarchical whereas they are in a hierarchy in the Controlled Vocabulary format.
Dragging and dropping would be the painful method to clean.
Considered deleting all keyword tags and then reimporting the Controlled Vocab file but it doesn't seem possible to delete all keyword tags, manually deleting each keyword is very painful.
Any help would be appreciated.

Something to try first: select the keywords to delete and hit the "-" symbol at the top of the keyword list (left panel).
If that doesn't work, select all the files and delete the keywords in the Keyword Tags text box (right panel). It may take a while for Lightroom to crunch through this. When complete you can purge all unused keywords via the Metadata menu.
Winston Mitchell
Boise, Idaho

Similar Messages

How can I manage existing files with folders?

I turned on Creative Cloud syncing in Adobe Ideas, which I've been using for quite a while, and now I have a bunch of files in the root of the view that I want to organise into folders. I created a folder in the web interface but there's no way to drag'n'drop files into the folder. This is also impossible in the iPad app. Is this a forthcoming feature or is there already some way to do it?

Did you figure out how to move your files? Here's a little video tutorial about moving and organizing files in Creative Cloud: http://tv.adobe.com/watch/learn-creative-cloud/selecting-moving-and-deleting-files-in-crea tive-cloud/

Training & events management integration with controlling

Dear TEM Gurus
I am doing the SAP TEM integration with Controlling module. I have run the Cost transfer wizard with all the settings.
But while running the programme RHXCCOS0 HR Document is not created.
it doesnt even show any error message. Pls suggest
If any body has any doc related to this pl pass on.
Thanks & Regards
Vidushi

What functionality are you looking for?

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Problem with control IDs

I have two different panels in my program with various controls. The .h file
created by Labwindows for my .uir is partially reproduced below:
#include
#ifdef __cplusplus
extern "C" {
#endif
/* Panels and Controls: */
#define PANEL 1
#define PANEL_DATE 2
#define PANEL_FILE 3
#define PANEL_EWTR 4
#define PANEL_PROCESS 5
#define PANEL_CONVERT 6
#define PANEL_DONE 7
#define PANEL_PRINT 8
#define PANEL_SAVE 9
#define PANEL_TEXTBOX 10
#define PANEL_TEMP 11
#define PANEL_RH 12
#define PANEL_ATM 13
#define PANEL_MARKER_FREQ 14
#define PANEL_MARKER_DB 15
#define PANEL_MARKER_MIN 16
#define PANEL_MARKER_MAX 17
#define PANEL_MARKER_RIGHT 18
#define PANEL_MARKER_LEFT 19
#define PANEL_GRAPH 20
#define PANEL_SCALE 21
#define PANEL_MARKER 22
#define PANEL_TEXTMSG_3 23
#define PANEL_TEXTMSG_4 24
#define PANEL_TEXTMSG_2 25
#define PANEL_TEXTMSG 26
#define PANEL_2 2
#define PANEL_2_GRAPH 2
#define PANEL_2_N_5 3
#define PANEL_2_N_4 4
#define PANEL_2_N_3 5
#define PANEL_2_N_2 6
#define PANEL_2_N_1 7
#define PANEL_2_LED_5 8
#define PANEL_2_LED_4 9
#define PANEL_2_LED_3 10
#define PANEL_2_LED_2 11
#define PANEL_2_LED_1 12
#define PANEL_2_DONE 13
#define PANEL_2_MARKER_FREQ 14
#define PANEL_2_MARKER_DB 15
#define PANEL_2_MARKER_MIN 16
#define PANEL_2_MARKER_MAX 17
#define PANEL_2_MARKER_RIGHT 18
#define PANEL_2_MARKER_LEFT 19
#define PANEL_2_PRINT 20
#define PANEL_2_BUTTON_5 21
#define PANEL_2_BUTTON_4 22
#define PANEL_2_BUTTON_3 23
#define PANEL_2_BUTTON_2 24
#define PANEL_2_BUTTON_1 25
#define PANEL_2_CURRENT 26
#define PANEL_2_TEXTMSG_2 27
#define PANEL_2_TEXTMSG_3 28
#define PANEL_2_TEXTMSG_4 29
#define PANEL_2_TEXTMSG 30
#define PANEL_2_MARKER 31
The problem is that Labwindows has assigned the same control ID to controls
in the two panels, for example, PANEL_MARKER_MIN and PANEL_2_MARKER_MIN have
the same ID, i.e. 16. If I try to use both of these controls in the same
"case" statment, I get an error "Duplicate case label '16'." If I try to
modify the .h file manually, and change the ID for PANEL_2_MARKER_MIN to
216, there is no error and the program executes but it no longer recognizes
mouse clicks on the PANEL_2_MARKER_MIN control.
Is there some way to fix this problem? Is there a way to force Labwindows
to assign different IDs for all controls, regardless of what panel they are
in?
Thank you for your help in advance.

"...The problem is that Labwindows has assigned the same control ID to
controls
in the two panels, for example, PANEL_MARKER_MIN and PANEL_2_MARKER_MIN have
the same ID, i.e. 16. If I try to use both of these controls in the same
"case" statment, I get an error "Duplicate case label '16'." ..."
UIR editor counts controls inside the single panel they are in. In your
example, PANEL_MARKER_MIN and PANEL_2_MARKER_MIN have the same ID 'cause
both are the 16th control in their panel, rare case but it happens...
There is no way to force UIR editor to assign specific IDs to controls,
unless you add in one panel decoration controls or text messages and put
them before the other control in 'panel order' (ctrl+t in the editor): with
that trick you put in one panel all controls star
ting with order 0 (that is,
with control ID starting from 1 in the .h file), while in the second you
have non-operative contrls with lower IDs and operative controls or
indicator with higher IDs. This is NOT a polite solution since it relies on
the number of controls in the panels: every time you add new controls to a
panel, you should manage how IDs are assigned to them in order to avoid this
problem...
The best solution is to have two nested cases in your code, first one to
manage different panels, second one to manage different controls:
switch (panel) {
case PANEL:
switch (control) {
case PANEL_MARKER_MIN:
break;
// other controls of PANEL must be put here
break;
case PANEL_2:
switch (control) {
case PANEL_2_MARKER_MIN:
break;
// Other controls of PANEL_2 here
break;
That way you avoid any possible confusion and control mismatching that can
c
ause bizarre beaviour to your progrma.
Hope that helps
Roberto

How to manage scrolling in Table Control

Hi,
I have one scenario in which i have one table control in that one column contains check boxes. After i check, some check boxes in some rows and press scrolling button means the selection previously made goes off. I want the selection remains selected.
Please any one suggest me how to manage this.
Regards,
Mithun.

Your PAI flow logic should be following this type of structure:
process after input.
module at_exit_command at exit-command. "don't exit here if you want TC data changes
module d9999_before_tc.
loop with control tc_9999.
    chain.
      field:
        gs_9999_tc-sel,
        gs_9999_tc-checkbox.
      module d9999_line_tc_handler. "hold onto TC row data in here
    endchain.
endloop.
module d9999_user_command.
module d9999_pai_scroll. "scroll the table control
As noted above, you need to catch the values of your checkboxes within the loop / endloop for the table control, and do any scrolling after this.
Jonathan

ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

Purpose
Oracle Order Management - Version: 12.0 to 12.0
Information in this document applies to any platform.
R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
Solution
일반적인 MOAC Setup:
1. HRMS에서 Security Profile을 정의:
a. HRMS Management responsibility 선택
b. HRMS Manager> Security> Profile로 이동
c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
e. 저장
Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
2. MO Profile Options setup:
a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
Keep the MO profiles in sync:
MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
3. OM setup:
R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
Order Management Super User> Setup> System Parameters> Values
(See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
Sales Order and Order Organizer forms
Quick Sales order and Organizer forms
Sales Agreement forms
Pricing and Availability form
Other forms
Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
Reference
Note 393634.1

Hi Larry,
Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
Regards,
Gary
SQL Developer Team

Order management flow path with tcode in pp module

hi sap guru's,
i need the order management flow path with tcode in pp module.
regards,
muralidhar.t

Hi Murlidhar,
Step 1: Material Master
Logistics > Production > Master Data > Material Master > Material > Create General > Immediately MM01
Step 2: BOM creation
Logistics > Production > Master Data > Bills of Material > Bills of Material > Material BOM > Create CS01
Step 3: Work Center creation
Logistics > Production > Master Data > Work Center > ( New Screen ) Work Center > Create CR01
Step 4: Route creation
Logistics > Production > Master Data > Routings > Routings > Routing > Create CA01
Step 5: PIR Generation
Logistics> Production>production planning>demand management>PIR>Create MD61
Step 6: MRP Run
Logistics>Materials Management>Material planning>MRP>MRP>Total Planning>Online MD01
or
Logistics > Production > MRP > MRP > Sng-Item, Multi-Level MD02
Step 7: Evaluation through MRP list and Stock requirement list
Logistics>Materials Management>Materials Planning>MRP>Evaluations>MRP List>Individual Display MD05
Logistics>Materials Management>Materials Planning>MRP>Evaluations>Stock Requirements List MD04
Step 8: Conversion of Planned order to Production order
Logistics > Production > Production control > Order > Create > With a planned order CO40
or
Logistics >Production > Production control >Order > Create >With material CO01(For creating production order Without planned order)
Step 9: Order management
Logistics >Production > Production control >Order > Change >With material CO02
Step10: Confirmations
Logistics >Production >Production control >Confirmation >Enter >For order CO15
or
Logistics >Production >Production control >Confirmation >Enter >For Operation >For time ticket CO11N
Step11: Goods issue
1. Logistics >Production >Production Control >Environment >Goods Movement >Goods Issue
2. Logistics >Materials Management >Inventory Management >Goods Movement >Goods Issue MB1A--261Movement type
Step12: Goods receipt
Logistics > Production > Production Order > Environment > Material Movement > Post Mat to Stock
or
Logistics > Materials Management > Inventory Management > Goods Movement > Good Receipt > For Order MB31
Step13: Techo Or Close Order.
This can be done from Prduction. Order Header menu.
Regards,
R.Brahmankar

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

Sharing PSE7 Organizer keywords with Bridge?

I want to share my existing PSE7 Organizer keywords with Bridge. I searched the forums and found an some answers to use PSE7's "File/Write Keyword Tag and Properties Info to Photo" menu option. I did some tests with that option, and it appears to only do what I'll refer to as "additive writes," meaning it will add keywords in PSE7 Organizer for a particular photo, but it will not remove any keywords which are presently in the photo file but not in Organizer's informaton for the same photo file.
I'm guessing this is the case because PSE7 Organizer cannot assume the keyboard already in the file originally came from Organizer itself, or that the user (regardless of where an existing keyword came from) wants to remove a keyword if it's not in Organizer for the same file. It would be nice if there were a preferences option which one could select such as "Replace all keywords when writing to file" so that a user like myself could make Organizer's keywords the main keywords.
Does anyone happen to know if I understand this correctly, or is there a way to remove a PSE7 Organizer-written keyword from a file (based on its non-existence in PSE7 Organizer for the same file)?
If there is no way around this, I'm wondering if it may be better to do things the Bridge-way (which seems more like the general standard) since it seems to always keep the current info in the file, so the state is always with the file itself. Even if some features are missing, it may be better than dealing with this sort of PSE7-only feature. Any comments on this would be great to hear.
Thanks for any insight on this,
Tom

Okay, that makes sense on the Albums. I wasn't aware that Albums were ordered.
I was using Bridge some more after my post yesterday, and I was seeing that with PSE7, both Albums and Keyword items seem more readily accessible regardless of location of the items (photo files) because there isn't an extensive file system search required since the DB provides a quick search (assuming first-searches and no pre-existing caching in Bridge).
I started testing Collections with Bridge, and realized that it was sort-of doing that. This is another aspect of Bridge which is sort of a "db" aspect of Bridge in that it requires the browser to persist data seperate from the photo file. .
What can be a little frustrating about any browser-persisted informaton (such as that for Collections) is to not find anything in the docs about how to ensure one gets a good backup of that info. PSE7 does a great job of providing a feature to do just that. Recall this is one thing I really liked about PSE7 when I was unaware of the benefits of Bridge's "minimalist db" approach (where a "db" in Bridge is anything persisted by itself such as Collections).
The "how to" backup app-persisted information (aside from docs a user saves, where the user knows the location) is a must for any pro-am or pro person, if not an end user. People don't want information that is key to something they're building over time to be persisted in some mysterious unknown location. I couldn't find what I wanted in Bridge docs, so I did my own hunting, and found Bridge Collection information hiding in "%APPDATA%\Adobe\Bridge CS4\Collections" (i.e., c:\Users\<user_name>\Roaming\Adobe\Bridge CS4\Collections" on my laptop) in files named "<collection_name>.filelist". But even with that info, I, as a user, would still have to test to ensure I could get a backup good enough for disaster recovery / restoration. I'm a relatively technical user so I cannot imagine what "Dad" or "Mom" would do. This sort of thing is bothersome only because it's remedied with at least a small paragraph in the docs. What would it take to say "Backing Up Bridge Information: If you have a backup program which backs up the "%APPDATA%\Adobe\Bridge CS4" you will have all necessary data to restore the information that Bridge maintains. You must ensure you backup your photo files..." etc. etc. Without that, I have to do a bunch of hunting and testing.
All that said, I see how Collections, maintained by Bridge, offer some of that PSE7 power where you don't have to search for files in various locations to find what is already noted in a central Bridge file or "db" such as a Collection for which Bridge has a list of files in the Collection itself. (If Collections could contain other Collections, that would be a nice touch. I didn't see that ability.)
What I still like about Bridge's approach is that while Albums don't exist, and while Collections are hierarchical, there's a feeling that Bridge is not taking things over where you are forced to use that app. It persists some items relating to its organizational features, but keeps the rest of the info right in the photo file. Still a nice balance. Another nice thing about this minimalist approach is that there's no importing per se. Everything is browseable/maintainable since the file system is the photo db.
All that said, I can see where PSE7 does things for the non-power user such that they can just use, say, an Album, which has a familiar name, and behaves like an Album with ordering and whatnot. A user like me doesn't need that since I can use tools to create an Album like effect, so the Bridge approach wins since I can fend for myself in areas were I don't see PSE7 to hand hold.

How to remove existing keywords during import?

I have tried to find a way to NOT import existing keywords present in files that are already on my system, when I am importing those files into my library. They mess up my existing keyword structure and I just want to ignore them during import. I tried to enter an empty keyword text area with checkbox ticked in the template I apply during import, but that doesn't do the trick for reasons I don't comprehend. Any clues?

To tell you the truth, I don't think the Lighroom Import function has the capability of removing keywords.
Your choices seem to be ...
Remove keywords after import, in which case you would also have to remove the unwanted keyword from your hierarchy
Use freeware tools like Geosetter or Exiftool to remove the keywords from your photos before importing

Applications Management and Change Management Packs Certified with EM 10gR5

Applications Management and Change Management Packs Certified with Enterprise Manager Grid Control Release 5
For more details about the new features, documentation, and patches for the latest Application Management Pack and Application Change Management Pack releases, see:
[Applications Change Management Pack 3.0 and Applications Management Pack 3.0 Now Available|http://forums.oracle.com/forums/thread.jspa?threadID=935145&tstart=0]
Oracle E-Business Suite Prerequisites
11.5.10 with ATG_PF.H RUP5 and higher
Release 12.0.4 and higher
Release 12.1
Certified Platforms
Linux x86
Linux x86-64
Sun Solaris SPARC
HP-UX Itanium
HP-UX PA-RISC
IBM AIX Based Systems
Certification on Windows platforms is in progress.

It takes me a lof of time to comprehend the sentence you write. Cause I am a Chinese. My poor English.
I have to say "you are genius". I used to use the indesign CS2. There is no GREP function in CS2. When I get the new script, I do not know how to use it. Just when I saw the
'grep {findWhat:" +"} {changeTo:" "} {includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find all double spaces and replace with single spaces.'
Being confused.
Thanks so much. It seems I have to relearn the advanced Indesign.

SAP works manager 6.2 with ESRI maps

Dear Experts
We are using SAP Work Manager 6.2 with SMP 3.0 (SP05) Agentry and attempting to implement the ESRI location tab in the IOS agentry app but coming up with the following issue.
we have followed the exact steps in the SAP® EAM and service mobile app SDK Installation Guide with the exception that we are using Xcode 6.1 instead of Xcode 5. we have also had to include the System.Configuration framework but apart from this it has gone together without a problem.
We can run the existing SAP Works Manager app on the IPAD so we are able to successfully connect to the SMP agentry server but when we try to run the custom agentry app it halts at the following screen. We have tried different agentry users but with no success.
Could you please suggest if there are any other information available to get this working .
Following are the other SCN links we tried following
Quick Guide - Checklist to set ESRI in SAP Work Manager 6.1.X (WPF client)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20b3f3d8-9d8f-3210-4cbc-f3e42e6df649?QuickLink=index&…

Hi Sid,
Check the SDK version that was used to build your custom Agentry Client. Not the Server version.
From the initial screen click on the Info/About icon to see which version you're using to build your client e.g.
Looking at your image you can see the input field where you're meant to enter the Work Manager URL is behind the header field. I had the same issue when I was using an old version of the SMP SDK / Agentry Client.
I suggest you download the latest SDK version from the SAP Service Marketplace and rebuild a new client using that.
SK

Preview Will Not Edit Or Delete Existing Keywords

There used to be a severe bug in Preview for Snow Leopard where no keywords could be added or edited--while you could add them via the "info" box, on save they would disappear and not be saved. Well, that was fixed in a patch update--sort-of. While I can now add keywords to JPGs that have never had any, and I can edit or delete those same keywords, I cannot edit or delete keywords on JPGs that have been added by someone else using a different mechanism. For example, if someone sends me a picture that already has keywords, and I want to remove them and add my own, Preview lets me make the changes in the info box, but when I save, it reverts to what was there before. These files are unlocked and I have write permission to them.
Interestingly, I cannot even get these keywords to change when I use a third-party tool, like the command-line exif-tool. So the problem may be at the OS level. (Although a tool like Pandora will let me change them, but I believe it does a complete rewrite/remove of edited JPGs, since the 'creation date' is brand-new on any edited JPG).
I have a separate question about Preview eating files on a save, but that's not related directly to this problem--I have never seen Preview eat a file where I've tried to edit an existing keyword. It just discards my changes. I have been very disappointed with the reliability of Preview in Snow Leopard. Anyone have any thoughts?

Glad I could debug this software myself. The problem is simple: Preview will allow edits only of IPTC keywords in JPEGs in the APP14 segment. But it DISPLAYS any keywords set in an RDF segment. In other words, if the JPG has an RDF segment, Preview will display all its information from there--but it will not update it if you edit it. I guess I'll open a bug.

Annoying bug with Control Center

hello guys
i have this really annoying bug with control center
when you open, for example sms app, the keyboard shows, and you want to pull CC up.
just do it slowly and you'll see how your finger is typing smth like " bgt", ios for some reason isn't blocking keyboard when i'm trying to use control center
when you'll it fast, there is 100% chance to type space or one extra letter
i think people can accept such kind of bug on galaxy phones, but not on iphone.
is there something that i can do to fix this?

Keyboard clicks don't register unless you lift your finger when it's on a key; while the fact that you are dragging your fingers over the letters when swiping up for Control Center causes keyboard keys to be pressed is certainly annoying and admittedly kind of dumb, it shouldn't result in any letters getting actually typed. I just tried this myself, and although I do manage to "hit" a key on each row of the keyboard, they keys themselves never register with the Messaging app because my finger doesn't lift until the end of the swipe to bring Control Center up.
Drew

Managing existing keywords with Controlled Vocabulary

Similar Messages

Maybe you are looking for