Managing Locations in Flickr, Facebook

I would like to geotag all the photos in my iPhoto library, but decide on a case by case basis what photos have location information shared to Flickr and Facebook. For example, I would like to share the location of that photo I took of a waterfall on my last hike, but not my home location where my son had his birthday party. 
What's the best way of doing this?  I'm thinking about just making a copy without location information and sharing that.  If I do it that way, any suggestions about handling the duplicates?  Or is there a better way?
Thanks!
(PS: I'm still on iPhoto '09.)

The answer is that you cannot do a complete Move so long as the FB/Flickr album exists.  See:
https://discussions.apple.com/message/15137918#15137918
Ernie

Similar Messages

  • How do I move photos between projects if the photo is published in Flickr/Facebook

    I have a TOSORT project in my library that I use to triage photos as they come in. I go through and work on the photos and then move them to an appropriate library.  I made the mistake of accidentally publishing some photos to Flickr/Facebook from this folder and now I can't seem to move them out. Any tips/tricks I am missing?

    The answer is that you cannot do a complete Move so long as the FB/Flickr album exists.  See:
    https://discussions.apple.com/message/15137918#15137918
    Ernie

  • Aperture 3.1 - Mobileme - Flickr - Facebook

    Hi, I just upgraded to Aperture 3.1 and pleased to find all my galleries for Flickr and Facebook listed, and not just the one's created in Aperture. But for mobileme, there is still a mismatch: just the ones created in mobileme are listed in Aperture. Is this a bug, by design, or what? Not even sure why all the flickr/facebook galleries mysteriously showed up, as before 3.1, it was just the ones created in Aperture that were listed. Huh?
    thx,
    coocoo

    Came how from work, decided to do a test.
    Existing Facebook albums created in Aperture 3.0.x will re-size to 720 pix wide, you have to do slight "trick".
    Click on crop in the FB album inside Aperture, just touch the handles and hit enter.
    Aperture will re-size to 720 pix. Not the easiest but if you have certain picts you want larger this is one way to make it work.
    Message was edited by: mtbdudex

  • IPhoto removed my Flickr/Facebook photos

    I have been using iPhotos 11 for a while and also using it to upload pictures to Facebook, Flickr, and Mobile Me.
    Recently my colleagues recommended Aperture 3 and I purchased it from Mac store. After importing my iPhoto Library into Aperture, I decided to remove my iPhoto Library to avoid duplication (of disk space). However, once all events have been moved to iPhoto trash, I saw my accounts under Web section being Sync and all pictures are removed from my Flickr/Facebook albums
    What can I do for recovery? Do I have to manually add the pictures to iPhoto? Or I should set up from Aperture now?
    Is there any way to avoid such kind of Sync? I meant, some pictures I've uploaded to Facebook/Flickr, I am happy to keep them there and on the local machine I want to move them to backup drives.
    Thanks.

    Thanks John TheAppleFan.
    May I ask a irrelevant question - how to delete a picture in Aperture? When I set up I had Aperture 3 "import from iphoto library" and save to the "Pictures" folder.
    I noticed if I delete an image file in Finder, the picture still shows up in Aperture Library. If I delete a project within Aperture 3, the image folder (and images) also exists in Finder.

  • No system manager locations set, search application might not be ready yet

    Hi,
    I am just setting up a new SharePoint 2013 environment (Windows server 2008 R2 + SQL Server 2008 R2) and I am getting this error message in powershell when I try to save my new search topology: No system manager locations set, search application might
    not be ready yet. The installation script used to install and create the search service originates from this link: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378 and I receive the error message after running $clone.Activate().
    ULS is writing this:
    05-29-2013 14:57:00.94 mssearch.exe (0x19C0) 0x1A68 SharePoint Server Search Crawler:Content Plugin cd11 Critical Content Plugin can not be initialized - list of CSS addresses is not set.
    05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration dkd5 High synchronizing search service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration eff0 High synchronizing search data access service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    05-29-2013 14:56:09.38 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajzc7 Medium Cleanup of Orphan Systems in server SR00667 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwve Medium Synchronizing legacy admin 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai4f1 High Unable to get systemmanagerlocation from db 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai84s Medium Skipping legacy admin sync as there is no system manager location set 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwvc Medium Skipping Topology Synchronize.The active topology does not have any Components. 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajnco Medium Cleaning up Orphan nodes in system : 7B4831 8f28209c-5d35-a0cc-7fad-bd7b088335ee
    So basically all else is going fine before saving the clone. Application pool is created, search service and it´s proxy is created (the databases are also created in SQL). The clone is after this created and then the components are added.
    I have tested with both March and April CU. I use separate accouns for search service, installation and so on. I have tested giving the search application pool account local admin right but didnt make any difference.
    Some posts in Internet around this matter is pointing towards there might be 4 missing patches like here: http://blog.steigis.ch/sharepoint/sps2013/search-in-starting-state/  They are all installed on my server.
    Search host controller service and SharePoint Server Search are started.
    Before creating the service I ran this. I have done this on all my other installations of search to solve the problem with the host service is in "starting" state. Info taken from here: http://mmman.itgroove.net/2012/12/search-host-controller-service-in-starting-state-sharepoint-2013-8/
    $acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
    $person = [System.Security.Principal.NTAccount] "Users"
    $access = [System.Security.AccessControl.RegistryRights]::FullControl
    $inheritance = [System.Security.AccessControl.InheritanceFlags] "ContainerInherit, ObjectInherit"
    $propagation = [System.Security.AccessControl.PropagationFlags]::None
    $type = [System.Security.AccessControl.AccessControlType]::Allow
    $rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
    $acl.AddAccessRule($rule)
    Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
    $sh = Get-SPServiceInstance | ? {$_.TypeName -eq "Search Host Controller Service"}
    After this I do a server restart and continue with creating the search service and its components.
    Any ideas?

    I had exactly the same issue when setting up a new SharePoint 2013 environment (Windows Server 2012, SP2013 with PU March 2013 and CU April 2013, .NET 4.5). I have tried almost everything during the last weeks to configure the Search Service Applicatione,
    e.g. create the service from GUI, create it from PowerShell, verify my search account had enough permissions, check for missing updates etc. etc. Same error no matter what I tried.
    Using another SharePoint farm I went through a similar configuration of the Search Service Application. I used exactly the same script as I did on the first server and the setup completed without any issues. So why did the same features fail during the setup?
    To find an answer I compared the two farms and the only thing I noticed that were different was the lack of .NET 3.5 on the application and WFE server in the first farm. I then enabled .NET 3.5 features and now the Search Service Application works as expected
    I had no idea enabling .NET 3.5 features would solve the issue - I thought .NET 4.5 was backward compatible and SharePoint only requires .NET 4.5 according the
    requirements?

  • Edits don't export to flickr/facebook

    To elaborate, I'm on Mac OS Mavericks with PSE-10. I can upload to both flickr and facebook, but it uploads the original (.CR2) file. When exporting to Flickr/Facebook, my photos show up as originals, not the edited version, even though the edited version appears in my PSE-10 organizer window. What am I doing wrong? The edits were simple; photos opened in the "white window" (to adjust color, exposure), then clicked "done" to return to the organizer, where they appear in edited form.  However, when I export from the organizer to flickr or facebook, the unedited version appeared on those sites. This is most noticeable in a night-shot, where I adjusted the color from 5050 to 3200 to cool the picture. Any help/suggestion is appreciated.

    I am guessing here but I suspect that option has been removed as Apple have discontimued iWem and dont want to provide an  iWeb function.
    Im unable to comment on HTML export as its working for me, but I have not upgraded to the latest version due to the amount of problems it is causing users.

  • Trouble with export to Flickr/Facebook

    When exporting to Flickr/Facebook, my photos show up as originals, not the edited version, even though the edited version appears in my PSE-10 organizer window. What am I doing wrong? The edits were simple; photos opened in the "white window" (to adjust color, exposure), then clicked "done" to return to the organizer, where they appear in edited form.  However, when I export from the organizer to flickr or facebook, the unedited version appeared on those sites. This is most noticeable in a night-shot, where I adjusted the color from 5050 to 3200 to cool the picture. Any help/suggestion is appreciated.

    There is no export to Flicker/Facebook in Photoshop perhaps you have Photoshop Elements. Element may have a feature like that. Ask your question in that forum Photoshop Elements
    There may also be a feature like the in the bridge. Bridge General Discussion

  • Where is the T-Bird Profile Manager located? (Mac OS 10.7)

    T-Bird migration Instructions refer to a "Thunderbird Profile Manager." Where is this Profile Manager located? Where is this animal located? (Mac OS 10.7)
    John

    Please do not start multiple threads for the same problem. Continue here<br>
    https://support.mozilla.org/en-US/questions/996340

  • No Way to Update Location Status on FaceBook via VZ Navigator on Droid X?!!

    I just upgraded to a Droid X from an HTC Imagio and have a question regarding the VZ Navigator software on the Droid X. On my Imagio, the VZ Navigator had an option to update your location status on FaceBook so that after you arrived at your destination, you could post the address where you were on your FaceBook page. I cannot find any such option in the VZ Navigator software I installed on my Droid X (yes, it was specifically listed as being only for the Droid X!); I can only find the option to share your location with someone else by sending it to their e-mail address. Am I missing something here? Is that just not possible on the Droid X? I liked to do that as I drive a tractor-trailer for a living and my family members on FaceBook could see where I was most of the time!
    Please correct me if I am wrong!
    Dennis

    dmw4814 wrote:
    I just upgraded to a Droid X from an HTC Imagio and have a question regarding the VZ Navigator software on the Droid X. On my Imagio, the VZ Navigator had an option to update your location status on FaceBook so that after you arrived at your destination, you could post the address where you were on your FaceBook page. I cannot find any such option in the VZ Navigator software I installed on my Droid X (yes, it was specifically listed as being only for the Droid X!); I can only find the option to share your location with someone else by sending it to their e-mail address. Am I missing something here? Is that just not possible on the Droid X? I liked to do that as I drive a tractor-trailer for a living and my family members on FaceBook could see where I was most of the time!
    Please correct me if I am wrong!
    Dennis
    I was wondering if you have looked at Google Latitude (preloaded on the Droid X - App name is 'Latitude') This will give your family more real time updates on where you are located, instead of having to wait for you to update your facebook page. You can control which people have access to your information.
    My dad drove truck for a living for 27 years, and retired about 9 years ago, so I know what its like for your family to wonder where you at at different times.
    I know that this doesn't answer your question, but just wanted to let you know that there are alternatives to help solve your problem.
    Have a good day, and bless you for helping our country move goods to where they need to be. Be safe out there.

  • How do I turn off location services for Facebook in ios6

    I have updated my iPhone 4 to iOS 6 and I cannot figure out how to turn off location services on Facebook. I do not want to post my location with my Facebook posts. Help?!?!?

    Settings>Privacy>Location Services>Off.

  • Splitting iPhoto libraries and it's impact on Flickr & Facebook?

    Hi! I currently have one library on my MacBook for iPhoto, running iPhoto 11. I have been using the built in exporter for Facebook and Flickr, but because of space I want to split the library into 2 and move some of these files to an external hard drive. If I move these files to the external hard drive, and then delete them from my MacBook hard drive, what impact will that have to items aleady posted on Facebook and Flickr if any?

    True.
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Keeping iPhoto flickr/facebook online things intact during/after reformat?

    Hey all,
    About to wipe my Macbook (Erase & Install) - been awhile.
    I have several albums in iPhoto that are synced Flickr and Facebook albums - will these be 'lost' if i reformat? I can save the iPhoto Library file during the process - if I put that 'back' when I am on my new install of the OS, will those albums return? Is is a preference file that tells iPhoto what's supposed to be there (in terms of the online synced stuff) or something else?
    I really like that they are synced and that there are comments on the albums/photos - don't want to lose that, but need to wipe this machine. I know I can keep the local versions of the albums, and re-upload if I had to - just would like to keep it the way it is, and haven't reformatted since I started using iPhoto to manage online content.
    Thanks a bunch

    Thanks for the responses, was hoping the online sync stuff was held in the library file in the Pictures folder, wanted to ask before I hauled off and deleted everything.
    Not to go off topic but..
    I reformat/wipe every so often, knowing that it isn't necessary, but because for one I just like the fresh start - I like putting only the apps/docs/etc back that I know I am going to use (and anything I forget, I probably don't really need anyway right?), that I know are what I want on the machine - I try out new apps constantly (trial period junkie) to see what's out there - and end up with a stuffed Apps folder after awhile - not to mention whatever else I decide to gunk up my machine with. I work on a very tight (small) hd on my Macbook as my primary (only) machine - space is tight, even with 2TB's of external storage.
    I call it regular maintenance - I know most people don't do it, but I've gotten it down to such an exact science (used to do it every 90 days) I can wipe a machine and have it back up and running in probably an hour or two - preferences, user settings/passwords and all. Call me weird, but I think it's actually kind of fun.
    And it might just be psychosomatic but I swear there's a huge performance boost after a wipe and a fresh install. I work with fairly large 16 bit Photoshop files, and every second is noticeable (even in other apps, iTunes seems to do better after a wipe too) Probably pushing the limits of a non-pro laptop, but it's all I got!

  • Creating new flickr & facebook albums in iOS.

    I used to be able to create new flickr sets & facebook albums when uploading from Photos or iPhoto, but that option seems to have disappeared.  Does anyone know how to get it back? 
    The only workaround I can find is to do it via each sites associated apps, but it's quite difficult in the flickr app without going through the whole upload process. 
    I prefer to upload from iPhoto as it doesn't compress the files as badly plus it also includes the exif info.
    I'd appreciate this functionality back because when I'm out on photo shoots I like to upload them to the ipad, do immediate selection, basic post, and upload them straight away to both these sites.

    Hi BastardSheep!
    As suggested in the article below, you may need to make sure that you are signed in to your Flickr and Facebook accounts in the settings of your iPhone:
    iPhoto for iOS: Comments and Share badge may not appear on photos shared to Facebook
    http://support.apple.com/kb/TS4398
    If you are still experiencing this issue, you may need to do some further troubleshooting by deleting the iPhoto app, then re-downloading it. Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Goods issue and packing with HU/WM-managed location

    Hello guru,
    I am stuck on the following process and hope you can guide me.
    1 - I perform a movement GI with cost center (201) in MIGO, and an outbound delivery order is created.
    2 - Next, I perform picking in the VL02N of the delivery.
    3 - After picking, I perform putaway TO creation. Given that I didn't setup the "Control of Automatic PICK HU creation" (under SPRO->LG>HU->WM), there is no HU object created.
    4 - When come to TO confirmation, I do not not how to proceed from here....System is requesting me to put in the HU with error message. I believe system is asking a HU...please see my questions:
    Question:
    If there is RF device, I can scan the Label on the pallet and the TO can be confirmed. Can you tell me which RF transaction (LMXX) to use to perform this step 3?
    For argument sake, if there is no RF scanner in place, may I know which online screen transaction code to perform step 3 to create the HU so that I can proceed the TO confirmation? can I use HU02 or HUPAST? If you say HU02 and HUPAST, there is no field in those two transactions which allow me to enter Transfer Order number, hence, there is no connection. Beside it is not possible to perform pick using HU02 with a storage location which is HU-managed (error message: Message no. HUGENERAL009).
    Sorry I am a bit confuse here in the GI side when come to HU.
    Thanks.
    Tuff

    Hello Manish,
    I didn't scan nor enter the destination storage unit number 1000000945, it was created automatically during LT03 with reference to outbound delivery.
    You means if I will to use LM07 to scan, the Transfer Order can be confirmed right away?
    In between, do you know my 2nd question .. that is if I do not use RF, instead using online transaction? I suspect HU02 or HUPAST allow me to create a HU with link to my outbound delivery.
    Thanks.

  • How to fix missing URI in synced albums with flickr & facebook

    A quarter of my flickr and facebook published albums have forgotten their URI to those web services.
    Which means they cannot check or sync with those services. Is there any way for them to find their web URIs again? Apparently some of the uploads didn't finish, so the albums on the web are missing photos and while iPhoto is happy to add and change photos in the local album, they've lost their sync URI, so they'll never change.
    You can see at a glance which albums have lost their URIs by switching Preferences->Web->"Check for new published photos" to "Manual". Then radio wave style sync buttons appear next to the healthy albums. Many of mine have no sync buttons.
    I'm gonna have to delete all these albums and republish them, won't I?
    iPhoto 09 - 8.1 (415)
    Mac OS X - (10.6.2)

    New versions of iPhoto seem to be more resistant to de-syncing. The problem has not occurred. There is still no way to manually resync albums, though.

Maybe you are looking for