Managing multiple email addresses for the same contact

Hi
I have set up a group so I can email multiple people at once using the usual method. However, when I put the 'xx group' in the Bcc, it mails them fine, but where I have more than one address for the contact, it picks one without asking me.
How do I set it so it always chooses a certain (main) address? For one, it sent it one of two addresses I had listed as 'home', on another it sent it to an address I had listed as 'work'.
They also appeared in different positions on the card, e.g. it is not sending tit to the first one it sees on the card.
Any thoughts?
Thanks
Mark

found the answer somewhere else:
When sending a message to a Group and a Group member (or members) has multiple email addresses, the following was copied from Address Book Help.
Choose Edit > Edit Distribution List.
Select the group whose addresses you want to manage.
Click the pop-up menu (column header) to choose which type of information you want to manage—phone number, email address, or street address.
Select the address or phone number you want to use for each member with multiple addresses or phone numbers.

Similar Messages

Can i send to multiple email addresses for the same contact

I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed. Can I send email to multiple email addresses listed inside the same contact? I hope this makes sense.
Thanks!

You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
For each group, select one address or the other for each contact. Do the same for the other group.
When you address an email, add both Groups to the address field in Mail.

Ability to add multiple email addresses to the same contact person

Hello SRM Experts,
I have a question in SRM 5.0
In "Personal Data" tab of "Employee Data" in Manage Business Partner, we have the ability to add multiple email address. But only one email can be selected as standard.
We have a new requiremnt that more than one email address has to be selected. Which means, when a bid invitation is published, the email notification has to go to all the email addresses from that list.
How can this be achieved?
Any information would be appreciated.
Thank you

By default the system send intimation to only one email id to the contact person.
If you want to be send to the multiple email id for a contact person. you need to implement the same in the BADI..
Try to find the BADI which is called on save of Bid invitation. You can check of the 'Published' status in the BADI method and fire the emails as required.
Regards,
Ramesh

Ability to send email to multiple email addresses of the same contact perso

Hi All,
We are using SRM 5.5.
In "Personal Data" tab of "Employee Data" in Manage Business Partner, we have the ability to add multiple email address. But only one email can be selected as standard.
We have a new requirement that when a bid invitation is published, the email notification has to go to all the email addresses from that list. i.e to pick up as many email addresses as are stored in the contact (personal data) screen in the Manage Partner tab.
This changes also applies to the change and republication process of bid invitation when click on u2018inform bidder u2018 button.
Any information would be appreciated.
Regards,
S K.

One option is the following:
1. Go to SPRO and locate "define actions for document output"; select the "processing types" for BBP_PD_BID. Look at the "Smart Form Mail" processing class / method. If it is the standard class CL_PD_BID_PROCESSING_BBP, change it to one of your own Z class and method. (You could make copy of the standard CL_PD_BID_PROCESSING_BBP class.)
2. Modify the method PROCESS_BBP_BID_MAI_BCS of your Z class; locate the comment "Create and send email" and make changes to that section to add more email recipients of that contact person.

HT204150 How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact? Or at least change it for the autofill information?

How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact? Or at least change it for the autofill information?
Perfernece for contact to change. Do I just have to dis-associate my contact fromt the facebook account? Is only the autofill changable?

If you allow Facebook to access your contacts and you have the @facebook.com email alias turned on, it will add the @facebook.com email to your contact info, and because it has the fixed label of "email" it overrides every other email address.
They didn't fix this in iOS 8.
There are two ways to remove the @facebook.com email from your contact info:
If you don't need your Facebook friends and their info updating your contacts, go into iOS Settings -> Facebook and turn off access to Contacts.
If you don't use your @facebook.com email address (all it does it forward to the primary email address) you can go into the Facebook app, More -> Settings -> General -> Email -> and uncheck "Use your Facebook email". Removing it from Account Emails does not work, you have to turn it off. Once you do this, go to iOS Settings -> Facebook and turn Contacts off and on again to make it update your info. The @facebook.com address should be removed.

Multiple shipping addresses for the same supplier (depending on the symbol)

Hello ,can we set up multiple shipping addresses for the same supplier (depending on the symbol)?
.& How..
Thanks

a delivery adedress has nothing to do with a certain supplier, except you are talking about subcontracting (do you?)
a delivery address specifies an address where you want the supplier to send the goods to.
if it is a third party PO, then the delivery address is derived from ship-to partner of the sales order.
in case of a standard order to stock, the delivery address is coming from the storage location address (if maintained). if no storage location address is maintained, then SAP takes the address from your plant.
You can manually add a delivery address in MEAN transaction and then manually assign in POs delivery address tab.
here you can as well take the address from any address already in your system (e.g. any customer or vendor).

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

Somehow I have two sign-in email addresses for the same iTunes account. How can I fix?

I believe it started with Mobile me, but not sure. I have apps that I've downloaded using an old sign-in email address and apps that I've downloaded (to the same Mac) using the newer sign-in email. I can access iTunes with the newer address. But I often get prompted to input my old sign-in email address (and old password) when upgrading certain apps. It's very annoying. And now I've moved all my files to a new computer and it won't allow my apps from the old sing-in to sync without authorizing the computer first (which it already is, but isn't recognizing as much with the old email address...).
Help.

I suspect what you have ended up with is two AppleIDs/accounts. You cannot merge content. Decide which one you want to use and use that one for future purchases. For previous purchases you will have to make sure the other one is kept updated in terms of contact information and you will have to use it to access its content.

Duplicate addresses for the same contact in Address Book.

For many of my contacts, there are duplicate addresses. When I delete one of the addresses, both of them disappear. Pretty funky. Anybody else see this type of thing?

Hi,
Pls go to, Enterprise mangaer --> Monitoring -> incident --> Search for the target and select as "show all" will give you alert details.
Enterpise --> Monitoring --> Incident Manager: Search -->
Last updated : Date Range:< >
Target Name : D B NAME
Target Type:<DB TYPE>
Include members : Target and all member
Status : Show both open and closed
Supressed : Show all
2)Please verify your notification setup
Setup --> Incident Rules => Select your rule(will be in the alert) -->edit --> Select the event --> NExt --> Add actions --> edit
Repeat Notifications
Both basic and advanced notifications can be sent repeatedly. The repeat notifications will stop only when one of the following conditions is met: The incident is acknowledged, the incident has cleared, or the maximum number of repeat notifications has been reached. Repeat notification is not supported for corrective action job status updates and causal analysis status updates on events.
Send Repeat notifications --> Enabled? if is enabled then u will get repeated notification.
OR if you set the frequency like 15 mins , 5 notification then u will receive 5 on every 15 mins if the alert persists.
Regards
Krishnan

Multiple address for the same customer code

Hi,
Suppose we have a customer name XYZ LTD whose sap code is 123.
Now user want to maintain multiple addresses for the same customer in the same code.So that during billing he can have option to chose one of the address in which he want to sent the invoice.
Is it posible if yes then let me know.
Thanks in advance.
Regards,
SATYA

Hi Satya,
you can define for a vendor/customer several partner functions with different
adresses. You can create certain partner roles several times.
If you create a purchase order, than you can choose the wanted
address and partnerrole on the header level. In the standard system you
can use the patner role 'OA' ordering address and for the finance
the 'IP' Invoice presented by.
I hope I was able to help you.
Kind regards,
Zsuzsanna

HT2486 How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the group I want to send to.

How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the address book group I want to send to.

The group is "undisclosed" there are 6 contacts in the group. The contacts are listed in 2nd column entitled "name", one of these contacts remains highlighted or selected in grey. I can't remove the grey selection of the contact. When you select the "undisclosed" group as the "to" address the contact highlighted in grey appears in the email address box. The group name should appear in the email box, but it doesn't. This began to happen after I upgraded to IOS 10.6.8. However I'm not sure that has anything to do with the problem? I do not have "show all member addresses selected." Your help is appreciated.

Multiple Email Addresses in the Seperate Remittance Advice Delivery setup

In R12 Oracle Payables, is it posssible to specify multiple email addresses in the Email field under the Separate Remittance Advice Delivery tab. This is to send separate remittance advice to multiple email addresses for a given supplier / supplier site.
Navigation:
Responsibility: Payables Manager
(N): Suppliers -> Entry
Query a supplier.
On the left side, click on Payment Details
Click on the Update Payment Details icon for a supplier site
Click on the tab Separate Remittance Advice Delivery
Select Delivery Method = Email
Enter email address in the Email field.
Does Oracle support comma or semi-color delimited email addresses entered in the Email field, by which Separate Remittance Advices can be sent to those email addresses?
Thanks.

Oracle support comma to specify multiple email address.
I have tested the same in R11i instance and specified multiple email address with comma as separator.
Hope this helps.
Thanks and Regards
Manish Jain.

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

Just an email address
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

Broadcasting via Bursting to multiple email address for a single vendor cod

Hello -
I have a requirement to broadcast out a web template based scorecard to multiple email addresses for a given vendor code. We have gotten it to work via a single email address, but I need to send it to more than one email per vendor code.
Has anyone else tried this?
Thank you!

Hi Chris,
If my understanding is right, you must be using the master data of vendor Code(Which has an attribute to store Email IDs).
You can add multiple email ID to the same master data separated by semi colon ";"
If you are using user IDs instead, I dont think it is possible to use multiple user ID in the same attribute.
in this case you need to enhance the master data with a new attribute to store the second user ID and the create a separate setting for this attribute.
Hope this helps.
Regards.
Shafi.

Do I need Open Directory for multiple email addresses for Calendar users?

Hey all,
I have a single mac mini which I use simply as a calendar server for +/- 20 users. One day I might use Profile Manager to manage their iOS devices too. On the initial installation, we enabled Open Directory, although I'm not sure that it's required, and we have no plans re using it to manage network logins etc aside from existing calendaring.
I'm working through a migration from a Lion Server.app install to Mavericks, and due to some data corruption issues, we'll probably just rebuild the server and reimport the users calendars.
On my existing Lion Server installation, I can still use workgroup manager to assign multiple email addresses to calendar users, so that when a user invites another user to a calendar event using any of their email addresses (we have several variations), the invitation still gets pushed to the correct calendar user.
On Mavericks, without installing Open Directory, it seems I can't do this (I've downloaded Workgroup Manager for Mavericks, but it obviously can't connect to a local open directory). If Open Directory is optional, I'd rather not install it, to avoid overhead and complexity, but I still need a way to manage these multiple email addresses (aliases doesn't cut it).
Any ideas / suggestions?
Thanks,
D

For Calendar server to send actual email invitations to an attendee, two things must happen:
First, you need to configure Server.app > Calendar > Enable invitations by email. Enabling that will bring up a wizard dialog that will step you through the IMAP and SMTP account settings. The default values in that wizard will tell Calendar server to use the local Mail server (which you then would have to configure to use the appropriate SMTP relay, etc.). Or you can change the wizard settings to refer to an external IMAP and SMTP server. It is wise to use a dedicated IMAP account for Calendar server's use -- don't go using someone's personal IMAP account because there might be some "undesirable interactions", let's say. If you need help configuring this for, say, a Gmail account, I can help with that.
Second, the email address for the attendee must *not* be known to Calendar server, i.e. it should *not* be in the Directory. As you probably found out, if Calendar server sees that the attendee has an email address that is in the Directory, the attendee is considered to be "local" and the invitation will be delivered directly to the attendee's calendar client. If you simply leave those other email variations out of the Directory, Calendar server will consider that attendee "remote" and will send an actual email with a special attachment that calendar clients can understand.
Hope that helps.

Managing multiple email addresses for the same contact

Similar Messages

Maybe you are looking for