Managing the Help Screen display location and TOC frame width

Is there any way I can set how the Help is displayed when it first opens? I want to force it that the TOC frame is a certain width so the text is displayed properly always in the same way.

I think you will find the answer here.
http://www.robowizard.com/RoboWizard/NewProject.htm#Downloads/Skinny_on_Skins.htm
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

My G5 won't boot up. The Gray screen comes on and it thinks about it until the fan revs up like it is about to explode. A friend said to start it up with the OS disk and then go to utilities. Didin't work. Any suggestions? Isn't there a key stroke to help

Oh, so this is where I ask my question. Sorry, first time here. As I was saying in my long intro, the gray screen come up and the thing is spinning at the bottom, but nothing happens. Then the fan starts reving up like it is about to explode and I have to manually shut it off. A friend told me to start it up with the OS disk and then go to utilities. I couldn't find the thing, so I went out and bought another. Needless to say, it didn't work. Is there a key stroke to help jump start the machine? How can I get into this thing? I would prefer not to take it in because there are a lot of things on there I don't want just anyone to have access to.Thanks, in advance, for your help!

The last time you had to hold down cmd opt pr more than twice was a decade ago....
G5? PowerPC? 10.5? or earlier....
https://discussions.apple.com/community/desktop_computers/power_mac?view=discuss ions
Apple has a number of resources like "Power or Startup Quick Assist"
http://support.apple.com/kb/HT1149
Your drive does need to be repaired, and best things to buy are another backup recovery drive, with a small OS X partition; a copy of Disk Warrior is expensive @ $90 but excellent and best.
Never bother with or use the drive or reinstall while there are errors. Don't take a "clean' bill from Apple Disk Utility to mean there are no errors. Only that it didn't find what it looked for.
http://www.macintouch.com/readerreports/harddrives/topic4557.html#d12aug2010
http://www.alsoft.com/DiskWarrior/index.html
A quick search "keyboard shortcuts" takes you here:
http://support.apple.com/kb/HT1343
how to resolve and fix startup issues with fsck and disk utility:
http://support.apple.com/kb/TS1417
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
How to use DU to backup and restore
http://support.apple.com/kb/HT1553
http://www.alsoft.com/DiskWarrior/index.html
http://www.bombich.com/ccc_features.html
Make sure to have multiple backup sets and of your system so if there is a serious problem, you can just erase and restore to be back runninig.
Sounds like your G5 though needs PMU reset, not PRAM, and the best way for those is to clear nvram instead. might even want to check for dust; tell what System Profile says (later) as to "PowerMacX,Y" or "MacProX,1"
http://www.apple.com/support/powermac or /macpro
http://www.apple.com/support/sitemap/
The Utility menu is on the menu bar of an "OS X Install DVD" and at the point where you get to but stop at "install....' for OS X. you probably do need to install OS X on another drive to work from.
Oh, a real severe issue and damage to the drive directory or filesystem CAN in cases prevent booting from DVD (the system still tries to find and see what boot volumes are present) and can help to pull or disconnect the drive. Putting a drive in a FW case to turn on after startup is very useful.

I bought an Ipod touch Used, I connected to my PC and I wanted to restore it, but the restoration could not be completed, since my PC does not recognize my iPod or iTunes. On the iPod screen displays an image that says I need to connect the device to iTun

I bought an Ipod touch Used, I connected to my PC and I wanted to restore it, but the restoration could not be completed, since my PC does not recognize my iPod or iTunes. On the iPod screen displays an image thatsays I need to connect the device to iTunes.

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Since yesterday my Apple TV will not load the movies or tv at all. I select it from the home screen, it goes black, tries to load then goes back to the home screen. YouTube and Netflix works though. I've reset the Apple TV and the modem. No change. help?

Since yesterday my Apple TV will not load the movies or tv at all. I select it from the home screen, it goes black, tries to load then goes back to the home screen. YouTube and Netflix works though. I've reset the Apple TV and the modem. No change. Any ideas what the problem is?

Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating
http://support.apple.com/kb/TS4526

X200 Hotkey screen display location

I hope somebody may help me on my case.
I recently reformated my X200, and updated with all the relevant ThinkVantage tools with latest version.
Now, I came across the problem as below:
Volume Screen and brightness screen is now shown at mid-bottom location hiding at the back of the Windows bar. Thus, I am not able to see anything.
the desktop print screen is shown here:
http://attach1.mobile01.com/attach/200902/mobile01-3e36cc3e64d044434bcaa97ae751af51.jpg
May someone help suggest what I did wrong ? or would this be a problem caused by the latest X200 Hotkey update?
Thanks in advance. Simon

I have similar problem to yours. Updated new BIOS and all Hotkey through ThinkVantage.
My thread here: http://forums.lenovo.com/lnv/board/message?board.id=X_Series_Thinkpads&thread.id=7685
No one has responded just yet.
adand001 wrote:
Recently reimaged from Vista Home basic to Vista Ultimate.
After droping all the drivers and thinkvantage software back on, the On Screen Display does not show the volume bar nor the brightness bars. Tried reinstalling HotKey and every othercombination unistalls and reinstalls, I also flash to a new BIOS as well as installig the new OS, so not sure if it may be a problem with that. Any ideas, or updates in regards to this issue?

Can't get rid of the help screen

CC2014. I can't get rid of the help screen because the links at bottom are gibberish. See screen shot. What font am I missing?

Man, logging into Adobe is a major hassle. Anyway, I reloaded Tahoma and Lucida. But I don't see any delete or do not display.

When I turn on my macbook pro, the white screen displays a file with a question mark in the middle. What does this mean?

Suddenly, my macbook pro has experienced problems. When I turn on my computer, the white screen displays a flashing file folder icon with a quesrion mark in the middle. Has my hard drive burnt out? Thank you in advance for any helpful suggestions..

It means your computer is search for a start up volume. You need to reboot into recovery mode and attempt to repair your disk. To do this restart the computer and hold the keys:
<command> + r
Then open Disk utility.
http://support.apple.com/kb/ts1417

Difference among the Help view,Database view and Maintanance View

hi,
can Anyone pls let me know the Difference among the Help view,Database view and Maintanance View
thanks&regards
rama

The followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
The followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
Hope this is helpful, Do reward

Is there any way to recover files when the back up catalog has been deleted accidently. I can see a preview of the photos, but I cannot access or edit them. They say "the folder cannot be located" and "the photo is missing". I have gone through multipl

I can see a preview of the photos, but I cannot access or edit them. They say "the folder cannot be located" and "the photo is missing". I have gone through multiple Adobe tutorials to try and recover them to no avail. Any tips?

Backup catalogs wouldn't have helped with this problem anyway, but naturally, you shouldn't delete backup catalogs for a while.
The solution to reconnecting the folders is given here: Adobe Lightroom - Find moved or missing files and folders

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

In the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops.

i have updated my ipod 4g to ios 5.0. everything went great, but something is not right cause sometimes in the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops. help-me, what should i do?

It occurs with both ripped songs and ITMS songs, but not always the same songs. Just this morning, I had a song skip ahead, then put down the ipod for a few mintues, came back and that same song did not skip ahead at all. I've been on a stretch now of about 20 songs with no skipping whatsoever. Hmmmmmm....
I've used all the five "R"'s multiple times to no avail. It just seems so random, it frustrates me.
Thanks for the help, King

How to enter bios Setup (not the F1 stuff, the splash screen display settings)

So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
but now I have no idea how to get back into that configruator.
the Manual doesn't mention it, so question, how do I bloody do it?
T430S 2542 btw

Hello
Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
- TOSHIBA BIOS: enter using ESC and F1 button
- Phoenix BIOS: enter using F2 button.
According the specification your unit has Phoenix BIOS.
Bye

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator and (me)".

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.

Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM

Aperture does not show tick box for shared photo stream as promised on the help screen

I try to configure Aperture for iCloud shared Photo Stream. According to the help screen, I should select Preferences and see a panel with 4 tickboxes. The first three relate to My Photostream and work fine on all my devices. The crucial fourth tick box for sharing with others however does not show however. What else should I set-up to see the 4th tick box ?

You need:
'A Mac with OS X v10.8.2 or later and iPhoto 9.4 or later or Aperture 3.4 or later'
http://help.apple.com/icloud/#mmbc402b84

HT4623 After update of my iphone 3GS ios, I found out that my iphone has returned back to factory setting. It shows on the screen that I need to sett up my iphone so as to start using. I followed the on screen display but the step keeps failing

Dear Community,
Please can someone assist me on what to do on the following;
After update of my iphone 3GS ios. I found out that my iphone has returned back to factory setting and it shows No Service on the top left corner of my iphone screen. It equally shows on the screen that I have to set up the iphone before using it again. I followed the on screen display then get connected to a WiFi, but the response I was getting is that the Set up Server cannot be contacted please try again latter. I chose the option of using itune through my Laptop. The response I was getting here is that my iphone cannot be connected the itune store because my iphone was not found.
I am regretting why I updated the ios. Please, can someone advise me on what to do please.
I am ernestly waiting for your kind response.
Regards
Daniel

Hi iPheariPhoPad,
Welcome to Apple Support Communities.
It sounds like there’s an issue with Settings, the Notes app entry isn’t showing up as expected. Take a look at the article linked below and try restarting your iPhone 3GS.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If that doesn’t do it, try restoring your iPhone as shown in this article:
Use iTunes to restore your iOS device to factory settings - Apple Support
Take care,
-Jason

Managing the Help Screen display location and TOC frame width

Similar Messages

Maybe you are looking for