Managing WLC - AIR-WLC4402-12-K9

I am trying to discover my WLC's via snmp (v1 or 2), but am having trouble doing it. I had configured the snmp community strings (using CLI and https) and did not succeed both ways. I even added the IP address and mask for the mgmt server but am unable to do this.
I am not using WLSE at present and want to discover the WLC's for inventory and availability. For mgmt. sw, I am using nodeview/ciscoworks/CA unicenter.
any help would be appreciated.
thks

Thanks Frank, Steven,
I have got it to work. I had to enable snmp v1 to read. And I used 0.0.0.0 and mask 0.0.0.0 to do it.
One other question, As I have my mgmt stations on diff. subnets, how can I get the WLC to be discovered by all. I do not want to have it accept snmp from all (in other words no 0.0.0.0). But I use the same community string for all mgmt stns. and the WLC does not let me create multiple entries with the same string. Other than having diff. strings, is it possible.
Thanks once again.

Similar Messages

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

Thanks alot, that helped me .....
what about option 43..i am using one wlc and the switch where wlac and APs are connected is playing the role of dhcp server used by APs as there is a dhcp pool configured. please advise. will the command be
option 43 hex (f104xxxxxxxxxxxx) f104 adding to it the management ip address of the wlac in hexadecimal.
if the ip address is 192.168.10.5 then the command will be
option 43 hex f104c0a80a05
please correct me if i am wrong!!!!

Vulnerabilities from WLC - AIR-CT5508-K9

Hello, Guys
The follow vulnerabilities were found in my WLC - AIR-CT5508-K9:
Somebody knows these errors.
Port: 22/tcp     Running vulnerable SSH service: OpenSSH 4.0.
Port: 22/tcp     Running vulnerable SSH service. Vulnerable OS: Linux 2.6.15 - 2.6.27.
Port: 443/tcp     SSLv2 is supported
Port: 443/tcp     ip(xx.xx.xx.xx):443 negotiated the SSL_RSA_WITH_DES_CBC_SHA.
Port: 443/tcp     Running vulnerable HTTPS service.
Port: 443/tcp     TLS/SSL certificate is self-signed.
Can you help me?
Thanks,
Rodrigo

The first 2, there's nothing to do about it.
For support of SSLv2 and weak cipher encryption, there are commands for that.
config network secureweb cipher-option sslv2 {enable | disable}
The last one just requires you to install a signed certificate on the WLC management.

One WLC AIR-CT2504-K9 for Main office and 3 Branches

Hi ,
I need to configure a WLC AIR-CT2504-K9 with the followings requiremets:
1.- There is a main officce where the WLC and 7 LAPs will be installed.
2.- There are 3 branches; one LAPs in every branch will be installed.
3.- SSIDs for internal users and guest will be the same in each office.
Is it possible to set this scenario ?? (see complete info in table)
In the past I configure some WLC 2100 but I noticed some difference with this new WLC-CT2504
one of the differences that kept my attention were regarding ap-manager interface (not shown)
and virtual interface ( shown as NOT SUPPORTED)
Should I set ap-manager interface or is enough with managment interface ?
why the message "Not support" in virtual interface ??
How can I use one port for two interfaces (as is proposed in table), if I try to do this a message error is displayed
"Error setting AP Manager interface".
iF I set one interface and associate to one port (Enable) I can not set second interface in the same port so remains disable
This model of WLC just has 4 Ports.
I have read last config guide but is not clear for me because there is no examples of this kind of scenario.

Hi Scott,
I configured virtual interface from startup configuration wizard.
(Cisco Controller) >show interface detailed virtual
Interface Name................................... virtual
MAC Address...................................... d0:c2:82:e3:8e:c1
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
regards,

AIR-WLC4402-25-K9 with AP 1232

Hello I need help! I have the this controller AIR-WLC4402-25-K9 can I add the AP1232 to this controller?Is support this?
How can I do that?
Thanks

It depends on what version of code you are running. So long as you are running 7.0 or older, that AP is supported.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Configuring AIR-WLC4402-50-K9 through CLI

I have many AIR-WLC4402-50-K9 devices to configure and the cli is frusterating- does anyone have a link to a step by step document that walks through assigning an IP, SSID, and enabling the radios using the cli? I cant seem to find one that works completly. I just need to assign it an ip so I can use the web gui!
Thnaks

Hi Brian,
I would suggest to modify your configuration as follows, so to be able to associate to the open SSID called "test".
Please see the changes I marked in red :
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$hDfR$kvTnx/C3JJ0KOqrQzgwuY1
no aaa new-model
dot11 syslog
dot11 ssid GTEST
dot11 ssid test
    authentication open     # add this
    guest-mode                 # add this
dot11 ssid test2
username Cisco password 7 047802150C2E
bridge irb
interface Dot11Radio0
ip address 10.10.10.100 255.255.255.0   # remove this
no ip route-cache
ssid test
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
ip address 10.10.10.101 255.255.255.0    # remove this
no ip route-cache
ssid GTEST
ssid test2
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.1.200 255.255.255.0    # open the web-gui through this IP address
no ip route-cache
ip default-gateway 192.168.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag 1 route ip
line con 0
line vty 0 4
login local
end
I hope this helps.
Regards,
Federico
If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.

Prime Infrastructure to manage WLC 5760 with IOS XE 03.03.03

Hi there Is IOS XE 03.03.03 on WLC 5760 to be managed via Prime infrastructure 2.1 or what version do I need? It seems to be not fully supported with 2.1... Thanks and best regards Dominic

Hi Dominic,
The release notes http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/release/notes/cpi_rn.html#pgfId-43893 show support of up to 03.03.02
I have got a 3850 WLC running on IOS XE 03.03.03 managed by Prime 2.1
The release might not be up to date. When the release notes for Prime 2.1 came out, the highest supported is 03.02.03 and a few days later got changed to 03.03.02.
Regards,
Jeen Chew

Asset Management in Air App

Hello All,
I'm building an AIR application (2d platformer adventure game) which will be packaged on a CD for installation. I've embed the majority of the game assets into a static file to keep it simple and organized. This way I can reuse assets and swap them without much digging.
example:
[Embed(source = "../data/gfx/spritesheets/boyHero.png")] public static var boyHero:Class;
In the early days of the projects, everything went to plan. However as the project has grown to be over 28MB, I've started to run into Out Of Memory errors. These occur when I add new assets, refactor for a while, or add new classes. Once I get this error, I can restart FB and then work for another 15-20 minutes.
I've modified my .ini file bump up Flash Builder 4's memory allocation. It's currently set at:
-Xms512m
-Xmx1024m
While I'm at it, here are the specs/plug-ins that I've got installed:
FB v 4.0 (build 272416)
JNA Library 3.2.7
subclipse plugin 1.6.17
subversion client adapter 1.6.12
subversion JavaHL Native Lib 1.6.15
SVNKit lib 1.3.5.7406
Mac OSx v 10.6.7
2.53 GHz Intel Core 2 Duo
4GB DDR
My Questions:
1) Is the issue with the path that I've chosen for the way I'm handling in-game assets? I am streaming in some assets such as tutorial swfs which are loaded via the SWFLoader. I could go this route for all assets... but, should I? Is this the right way to handle a disk game? (The game runs without a hitch when installed on QA machines...)
2) Provided the embeding of static assets isn't an issue, Is this a FB4 bug? Where should I head for more information?
Thanks very very much in advance!
-J.

Hello!
Do you mean u201CDigital Asset Managementu201D?
Here I have a Link:
[http://aiokeh.wdf.sap.corp:50000/SAPIKS2/contentShow.sap?_SCLASS=XDP_STRUCT&_SLOIO=D0DB9A23B742429792D11D20C961B862&IWB_INDUSTRY=SOLMANCONT&TMP_IWB_TASK=PREVIEW&RELEASE=2007&LANGUAGE=EN&_SEQNUM=0|http://aiokeh.wdf.sap.corp:50000/SAPIKS2/contentShow.sap?_SCLASS=XDP_STRUCT&_SLOIO=D0DB9A23B742429792D11D20C961B862&IWB_INDUSTRY=SOLMANCONT&TMP_IWB_TASK=PREVIEW&RELEASE=2007&LANGUAGE=EN&_SEQNUM=0]
Best regards
Arno

Para que sirve el puerto Utility en el AIR-WLC4402-50-K9 ???

El puerto llamado Utility en el controlador wireless 4402 que uso tiene?
Si voy a conectar el WLC con cobre a mi switch neceisto forsozamente comprar un GLC-T para que me sirva este WLC? no lo puedo conectar directamente al purto Service o al Utility?

The Utility port is not in use at this time. It is listed as "for future expansion."

WLC: AIR-CT2504-50-K9 Vs HP J9420A

Helloooo
I need to show the best in Cisco controller versus HP (HP MSM760 Mobility Controller) controller in point of Security and mobility and other
difference will make choosing Cisco WLC as a piece of cake.
So your help is needed, please

Salam Samer,
I have no idea about the HP product itself. But you can always check the datasheet of the product (2500 WLC) and compare the specs with the HP one.
Here is the datasheet of the 2500 WLC: http://goo.gl/dSLZbp
The price is not mentioned in the datasheet. That can be a basic element to decide the product sometimes.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

Cisco AIR-WLC4402-50-K9 Enterprise traps

Hi,
I have multiple WLC4400 devices implemented in one of our supported networks. We use Entuity (Eye of the storm) to collect snmp information and traps.
The device up/down monitoring and connectivity is working normally. The issue im seeing is that our tools is receiving Enterprise Traps, and they look to be unrecognized by the tool. (receiving raw data) I have looked through the Cisco Mibs and tried to identify which one should be added to our tool to resolve, but there are wayyyy to many to choose from. Any help or suggestions would be greatly appreciated.
thanks,

You mention above the part number for a autonomous AP then state it is LWAPP. Was it converted? If it was, is it attaching to the same controller it was initially attached with in the conversion process? If not, the SSC is the issue. You must install the SSC hash on the controller. Next, look at the date and time on the controller to insure accuracy. Next is the AP getting an IP address on the same subnet as the controller management and AP manager interface? If not then insure you get an IP address and enable option 43 or DNS lookup of the controller.

AIR-WLC4402-25-K9

Hi,
Does the GLC-SX-MM applicable at this wireless controller for the distribution ports?
Thanks in advance
Abd Alqader

Yes.
Zwe

Upgrade WLC and APs

Hi,
We have 3 WLCs (AIR-WLC4402-50-K9) running 6.0.196.0 code.
There are ~55 APs shared among WLC1 and WLC2. WLC3 act as global backup for WLC1 and WLC2.
APs on WLC1 are configured WLC1 as primary and WLC3 as secondary controller.
APs on WLC2 are configured WLC2 as primary and WLC3 as secondary controller.
Since we are planning to deploy few 3502 APs therefore we need to upgrade the WLCs to code 7.x
I was planning the following:
1. upgrade WLC3 first and use the new code as backup image first and the existing one as primary
2. upgrade WLC2 in the same way as WLC3
3. predownload the new code to the APs associated with WLC2 and swap the image to use the existing one as primary and the new one as backup
4. upgrade WLC1 in the same way as WLC3
5. predownload the new code to the APs associated with WLC1 and swap the image to use the existing one as primary and the new one as backup
So far if either the WLC or AP restart for some reason come back with the original image.
6. Change primary image to 7.x on WLC3 and reboot > WLC3 comes up with new image
7. swap image for APs registered with WLC2 and Change primary image on WLC2 to 7.x
8. Reboot APs with WLC2 and WLC2 as well > APs boot up with new image and go to WLC3 if WLC2 is not up yet or back to WLC2 itself
9. Check if APs are on WLC3 if so reboot APs again to go back to WLC2
9. Repeat step 7 for WLC1 > APs boot up with new image and go to WLC3 if WLC1 is not up yet
10. Check if APs are on WLC3 if so reboot APs again to go back to WLC1
Is the above mentioned process sufficient or do somebody know a better/shorter one?
Do anyone have some experience with such excercise?
Thanks,
Krisztian

Hi Ven,
OK thanks for the answer.
However I would need sort of confirmation on the entire process .
Suppose WLC1 and WLC2 are the primary and WLC3 is the backup controller for both WLC1 and WLC2. WLC3 has no APs associted with it.
What I was planning:
1. Load the new code to the backup WLC3 and swap image to use the existing image (6.x) as primary and the new code (7.x) as failover. Reload controller?
2. Move the APs to backup controller WLC3 (in such a way you mentioned) and predownload backup image (7.x) (which is in fact going to be the new code eventually)
3. Upgrade the primary controller WLC1 and use the new code (7.x) as primary image. Reboot controller. WLC1 comes up with new code (7.x).
4. Swap the image on APs to use the new code (7.x) as primary and change the primary controller to the original one WLC1. Reboot APs.
5. Move APs from WLC2 to WLC3 like did for WLC1. APs and WLC3 still runs old code (6.x).
6. Predownload backup code to APs.
7. Do step 3. for WLC2.
8. Do step 4. for WLC2.
9. Swap image on WLC3 to use 7.x as primary and 6.x as failover. Reboot WLC3. WLC3 comes up with new code.
10. Relax have some beer and enjoy
Is the above described the correct way?
Thanks,
Krisztian

CISCO WIRELESS SOLUTION

Dear Expert,
I want to give solution to one of my cutomers. But I am new to cisco wireless. I am listing products below. Will this fulfill requirement
I have one more doubt, can I able to upgrade AIR-AP1262N-N-K9 to LWAP and can be able to connect this AP to WLC (AIR-WLC4402-12-K9)?
It is urgent Kindly suggest.
AIR-AP1262N-N-K9
802.11a/g/n Standalone AP; Ext Ant; N Reg Domain
AIR-ANT2422DW-R
2.4 GHz 2.2 dBi Swivel Dipole Antenna White, RP-TNC
AIR-ANT5135DW-R
5 GHz 3.5 dBi Swivel Dipole Antenna White, RP-TNC
AIR-AP-BRACKET-2
1040/1140/1260/3500 Universal Mounting Bracket
AIR-AP-T-RAIL-R
Ceiling Grid Clip for Aironet APs - Recessed Mount (Default)
S126W7K9-12425JA
Cisco 1260 Series IOS WIRELESS LAN
CON-SNT-AP1262N
SMARTNET 8X5XNBD 802.11a/g/n Standalone AP; Ext Ant
Product Code
Description
AIR-WLC4402-12-K9
4400 Series WLAN Controller for up to 12 Lightweight APs
AIR-PWR-CORD-AP
AIR Line Cord Asia Pacific (APAC)
SWLC4400K9-60
Cisco Unified WLAN Controller SW Release 6.0 - MD
SWLC4400K9-60-ER
WLAN Controller Emergency SW for 4400 - ED
CON-SNT-WC440212
SMARTNET 8X5XNBD 4402-12 WLAN Controller
Product Code
Description
POE-180X=
802.3af PoE Module, 80W Power Supply and Cable
CAB-AC2E
AC Power cord Europe
GLC-SX-MM-RGD=
1000Mbps Multi-Mode Rugged SFP

I have one more doubt, can I able to upgrade AIR-AP1262N-N-K9 to LWAP and can be able to connect this AP to WLC (AIR-WLC4402-12-K9)?
WLC 4400 is end-of-sale since December 2010. Your only choice is the WLC 5508 with corresponding license. Your software should be 7.0.98.0 or newer.
CON-SNT-AP1262N
Cisco Lifetime Warranty
    POE-180X=
What is this for???
GLC-SX-MM-RGD=Again, what is this for??? What switch are you plugging this into?

Manage AIR-AP1262N with WLC 5508

hello,
is it possible to manage a air-ap1262n with a controller like wlc 5500 or wlc 2500?
the official cisco support could not answer me this question for sure.
i have found this old guide to upgrade ap´s to lap´s, but there is hothing about the 1260 in it.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
i am a little bit confused!
the cisco documents tells:
"at_a_glance_c45-636090.pdf"
->
A wireless network with standalone access points offers a low-cost, entry-level
solution that does not require a controller. It is ideal for small-scale networks with less
than 20 access points, and offers base-level wireless functionality with the flexibility to
scale and add services over time by adding a controller.
<-
but the cisco helpline tells that they cant say it for sure - they cant find anything about that it would work and nothing that it dont work. ...and they have no one they could ask!^^
now I hope to find an answer
thanks and greetings
erik

Hi,
As mention by Steve, download the recovery image and then upgrade the AP IOs using the archive command over the CLI and instead of using the IOS image you use the LWAPP.
The supported AP is set by the code the WLC has and not the model of WLC.
The 1262 APs are supported starting code 7.0.98.0
Here is the link where you can check on all the release notes on different codes for the WLC, and you can see which APs are supported on each code.
http://www.cisco.com/en/US/products/ps10315/prod_release_notes_list.html

Managing WLC - AIR-WLC4402-12-K9

Similar Messages

Maybe you are looking for