Managment cockpit(drill down settings)

Hi friends,
At frame level i want to drill down on particular characterstic eg: region(zregion). what setting i have to made inorder to see 'zregion' field in defining: "Drill down settings"(inside screen, left side list of characterstics) for management cockpit? In selection criteria while defining frame, do i have to give all region values in order to select one of region values through "parameters" option?
Actually i'm displyaing expenses, eg: exp1 & exp2 on month wise. User wants to see on regionwise these two expenses in the same graphic frame. I want to give through "parameters" option. How can i achieve this?
thanks,
naresh

Hi friends,
upto some extent i got required things. I included characterstic 'zregion' in selection criteria step with set of 4 values while designing a frame in cockpit. Now i'm able to see field 'zregion' in drilldown setting option(left side pane of characterstics) and then dragged to right side pane for allowing drill down in frame. Next at presentation mode of frame(cockpit), in for month wise(x-axis,chart type: colon chart) able to see with two expenses. After that i want to drll down on expenses using "parameters" option, it displays list of regions for drill-down. But if i selected any region, it won't show respective regionwise expenses. How can i achieve this?
thanks,
naresh

Similar Messages

SEM Cockpit Drill Down Parameters are Missing

Dear Team,
I am facing a strange problem with BW-SEM Cockpit - we had imp. the SEM
Cockpit a year ago and it was working fine with all drill down parameter within
the internal web. but suddenly for some reason, all my cockpit KPI graphs are
not showing the drill down parameters, I have checked my settings of each KPI
for parameters, all are intact, no changes..
But how come it is happing all of sudden..?
guys kindly throw some light on this issue if any one of you have come across
this situation..or any std. proposals/recomended sol. are welcome.
Regards.

You should fill checkbox 'Display Hierarchy Icons' in BEx Analyzer - anlysis mode - analysis grid. ([http://help.sap.com/saphelp_nw70/helpdata/EN/85/1321d0b7864766b5208a0b221a7608/content.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/85/1321d0b7864766b5208a0b221a7608/content.htm])

BI Admin Cockpit Drill down routing to unknown host

Hi Experts,
We have implmented BI Admin Cockpit and testing it. When we try to drill down the query, it is opening in a seperate window and the host of the url is different than actual system. This shows Bad Gateway error. How to change this to actual host and do it.
Regards,
Suresh

Hi Suresh,
Do you mean that if you right click on any query, select goto -> opitons like display infocube, object overview etc, the url of different system is getting open . If thats the case, ask Basis team to look into it.
Show them the url, they will get hint from it.
Hope it helps.

Test Management Reporting drill-down on Test packages / test sequences?

Hi all,
I'm looking for a way to drill-down my test management reporting down on testpackages or even single test sequences.
Currently, I have only the test plan as lowest level available.
And it would be really great to have some more details to report.
Happy for any ideas,
Jan

Hi ,
You can try below Simple Steps ;
(generate using Wizard)
1. On Solution Explorer -> Right-click on Reports -> Select Add New Report
2.Click on the Next Button -> Give a Data Source name and Click on the Edit Button
3.Select Server Name -> Select "Use SQL Server Authentication" Radio Button
4.Give User name and Password -> Select Database Name and Click on the "OK" button.
5.Press the Next Button -> type your Sql Query -> NExt
6.Select Tabular Option and Click on the Next Button
7.Select [LOC_NAME],[Emp_NAME] for the Group list and the TotalEmployee is for Details -> Next
8.Select Stepped option -> Enbale Drilldown -> NEXT-> Finish(you can use this option if only you require Drilldown option in your report else you an ignore this or simply click next.)
9. Delete EmployeeName Column -> Paste Emplyee Name Next to LocName As shown in Image.
10 . Delete table1_Details_Group in Grouping Pane
11. Type =Sum(Fields!TOTAL_CUSTOMERS.Value) for Total Customer
12. Right Click on Emp_Name Row -> Insert Row -> Outside Group Above -> TYpe Employee
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

Drill Down Settings

Hi
In BPC for Excel is there a way to default the Drill Down options in Workbook Options to 'Expand by inserting new rows' currently all our workbooks open with 'Expand by overwriting rows', which we never use, so each time we start a new workbook we have to change the setting.
Thanks in advance for your help.
Kiund Regards
Gav

Hi friends,
upto some extent i got required things. I included characterstic 'zregion' in selection criteria step with set of 4 values while designing a frame in cockpit. Now i'm able to see field 'zregion' in drilldown setting option(left side pane of characterstics) and then dragged to right side pane for allowing drill down in frame. Next at presentation mode of frame(cockpit), in for month wise(x-axis,chart type: colon chart) able to see with two expenses. After that i want to drll down on expenses using "parameters" option, it displays list of regions for drill-down. But if i selected any region, it won't show respective regionwise expenses. How can i achieve this?
thanks,
naresh

Management Cockpit- list of settings made in Frames

Hi,
Is there anyway to get the list of all the settings made like Font, colour,type etc in all the frames?
Regards,
UR

Am trying to duplicated the size of the file that the director sent originally, or close to that size as there are now titles over the original footage that I would like to send him. Have looked at it's format information and you're right, it is H.264, AAC, Timecode. So have used that format in Compressor and it has reduced the file size down to 11.7MB. Thank you Michael for your help. Much appreciated.

Drill- Down - XD03 into Another SAP System

I want to Drill-Down from Customer Master (XD03) to Customer Sales Area Data. Customer Master Information is in One SAP server and sales area data is maintained in another SAP server.
IF user click on extras->Sales area-Customer Sales Area then system should fetch sales are from another system and displayed to user if user click on particular sales area data then system should show sales are data of a customer.
I done some R&D to achieve this using enhancement spots but still I am not able to find exact enhancement point. If anybody has any IDEA please share.
I successfully managed to drill-down from FI, SD, and MM into another system using enhancement framework without modifying standard. I want similar solution for Customer master.

check this badi CUSTOMER_ADD_DATA_CS ?

Drill down in mangement cockpit

Hi friends,
Could anybody simply explain what is meaning of drill down in managment cockpit?
1. How many levels of drill down, one can provide drill-down in a frame?
2. Can we drill down from monthly to calday wise, year to date,month to date and quarter to date?
3. How can i use calmonth in interval representaion in selection criteria of a frame (cockpit design)?
thanks,
naresh

Version SEM6.0 on BI7 system.
Line: -
If anybody able to access below url info, pls forward me info in this thread:
Make the SEM Management Cockpit More Useful with Drill-Down Configuration
by Paul Halley, Director of Strategic Enterprise Management, Business Information Solutions
Financials Expert - Volume 3 (2004), Issue 2 (February)
http://www.financialsexpertonline.com/article.cfm?session=&uid=d05762e8-8d85-450f-bcea-228d9cd01f3e
thanks,
naresh
Edited by: Naresh P on Dec 15, 2008 8:06 AM

Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

Hi
I'm configuring cash management and have created all planning levels and groups needed.
All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
I've created all the groupings etc that I need.
I'm running the reports FF7A and FF7B. I have two questions and problems.
1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly (E1-E9 and R1-R8). But when I try to drill into the cash management detail records (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem (using reports RFFDDL00 and RFFDKU00)
When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000 (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
Any help anyone can give me with these issues will be very much appreciated.
Thanks.
Wayne

Hi
I have the same trouble with Tcode FF7B. There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK. The message appears just witn Tcode FF7A.
Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
Can you help me?? can you solved this issue?
Tanks for your Help

Drill down from Cash Management to SAP Treasury

Hi
I am setting up SAP CM for a client running SAP ERP 6.0 release 603. We want to update SAP Treasury into SAP CM and have succeded in getting some expected cash flows into the cash position report from Treasury. The issue is however that when we want to drill down on the amount and expect to see the Treasury document (for documents where the posting did not reach due date yet), I get this error:
Planning level belongs to Treasury - no matching line items found - Message RQ147.
I can see that this was an issue years back and that SAP Notes corrected it at that time - but we are on the newest version so I cannot use those notes - but I still have the problem
Would be really grateful for an answer
BR
Lone Kejser

Experts,
FSCM : The Treasury u2013 Cash Management Integration.
I have been read the OSS note 93214. All the prerequisities are with the note but we are still getting problem.
Error:
Level E0 belongs to Treasury. No matching line items found
Message no. RQ147
The Planning Level ZZ is BNK and not assigned to any account.
The Planning Level Z1 is BNK and not assigned to any account.
The Planning Level E0 is BNK and assigned to Money Flow Accounts.
I try to various combination of those planning levels in configuration of V_T036V table. But none of them worked.
I run the FDFD many times but still it is not working. Please check the system and support us to solve this. We will planning to go alive at January but still we cannot have an TR u2013CM integrated system.
The table FDT1 is getting some values.
The table FDC1 is empty and not updating.
The System : SAP ECC 6.0
We tried FDFD Tcode, TRCC_SWITCH is marked up, we assigned the company codes to CM OT29, we assigned all flow types to relevant to CM
We have read the following notes; 97298, 332376, 384988. But fot the configuration side I think we are ok. But stil we are getting that error.
Best Regards

Manager - Sales-rep drill down report

[code]
SELECT
FSU.parentsystemuseridname AS Manager
, FSU.fullname AS 'Sales Rep'
, FSU3.fullname AS 'Level 3'
FROM FilteredSystemUser AS FSU
LEFT JOIN FilteredSystemUser AS FSU3
ON FSU.fullname = FSU3.parentsystemuseridname
[\/code]
There are multiple levels in the hierarchy but i am showing 3 levels only in the sample query above. I am trying to create a drill down SSRS report which shows the hierarchy. It works fine with a small problem.
Problem:
1.) Manager is a sales rep himself so in the "sales rep " column manager should be shown along with his associates with a null value for the "Level 3 " column.
2.) In the same way Sales rep should also be present along with his associates in "Level 3 " column.
Please help me with your ideas for the query. Thanks in advance.
Oracle 11g database.

Hi,
If you can show what you need to do using commonly available tables, such as those in the scott schema, then you don't need to post any sample data; just the results you want from the given data, and an explanation of how you get those results from that data.
For example, using the scott.emp table (where the relevant raw data, which you can get from this query:
SELECT    empno, ename, mgr
FROM   scott.emp
ORDER BY empno;
is
     EMPNO ENAME             MGR
      7369 SMITH            7902
      7499 ALLEN            7698
      7521 WARD             7698
      7566 JONES            7839
      7654 MARTIN           7698
      7698 BLAKE            7839
      7782 CLARK            7839
      7788 SCOTT            7566
      7839 KING
      7844 TURNER           7698
      7876 ADAMS            7788
      7900 JAMES            7698
      7902 FORD             7566
      7934 MILLER           7782
that is:
KING is the parent of JONES, BLAKE and CLARK,
JONES is the parent of SCOTT and FORD, and
SCOTT is the parent of ADAMS, and
you can get output like this:
CHAIN_O_COMMAND
KING
KING      JONES
KING      JONES     SCOTT
KING      JONES     SCOTT     ADAMS
KING      JONES     FORD
KING      JONES     FORD      SMITH
KING      BLAKE
KING      BLAKE     ALLEN
KING      BLAKE     WARD
KING      BLAKE     MARTIN
KING      BLAKE     TURNER
KING      BLAKE     JAMES
KING      CLARK
KING      CLARK     MILLER
using a query like this:
SELECT REPLACE ( SYS_CONNECT_BY_PATH ( RPAD (ename, 10)
                )         AS chain_o_command
FROM    scott.emp
START WITH mgr IS NULL
CONNECT BY mgr = PRIOR empno
Notice that the result set only has 1 long column, but it's formatted to look like multiple short columns. That's because the number of columns in the result set must be hard-coded in the query. If you don't know how many columns you'll need (because you don't know how many levels will be in the tree) this is one way to avoid dynamic SQL.

Drill down in BI Admin cockpit

Friends,
I successfully installed and setup BI admin cockpit.
In the portal , when I clicked on Data Load Status-> and then
Process Status, it lists process chains and processes in different iVews.
when I move the cursor over a process chain, the cursor turns to thumb. But if click on that, it is not talking to another screen. I'm not able to drill down on any tab/items.
Please help.
Joe

Hi
You should have the relevant authorizations for the same.
Hope it helps

Drill-down (navigation) in BI Administrator Cockpit

Hello,
We have installed BI Admin Cockpit on all the newest SPSes. But the strange problem is that I cannot do any drill-down / navigation on displayed standard reports (running in portal). BW context menu just do not pop-up when I right-click on report's element, like characteristic. Is it how it should be? I remember BI Admin Cockpit from almost year ago, and I think it allowed drilling...
Another - less important - question is what should be the BW version of queries and webtemplates used in BI Admin Cockpit? Again, I remember year ago they were 3.5. Now it seems that queries from content are 7.0 and webtemplates are neither 3.5 (thay contain xhtml tags) not 7.0 (you cannot open them in new new WebAD).
Thanks!
-Vitaliy

Ideally you should be able to get it from table
Frontend & OLAP Statistics:
- RSDDSTAT_OLAP (database view)
and data Data Flow is as below-Reporting on 0TCT_MC21
0TCT_DS21
0TCT_C21 0TCT_VC21
0TCT_MC21
You should get following statistics-
Average Query Runtimes
Predefined runtime categories
Drilldown to navigation step
Monitor query activity
(example: navigations / day)
Hope it Helps
Chetan
@CP..

Drill down with manager restrict access

Group,
I applied a restricted view of an object (CITY) to a particular group.
This object belongs to a table like the one below:
TABLE X
     FIELD - COUNTRY
     FIELD - CITY
     FIELD - NEIGHBORHOOD
The restriction that I created will not allow certain group has access to the cities.
I Build a Web Intelligence report with field COUNTRY and enable drill down. When I login with the user group that owns the restrictions, it can drill from the view cities. When I update the report, I get an error because the user doesn´t have privilege to update some fields (CITY).
I need to create a restriction that makes when you can not see a field, it jump to the next filel in the hierarchy from the drill down. Is it possible? eg. COUNTRY> NEIGHBORHOOD
Thank you

This should be achievable using Report to Report Interface (RRI) or by using the Dashboard..
The requirement on the calculated key figure is not quite clear? If you could elaborate.. some one could help..

Drill Downs in SSRS 2010 reports

Hello, I have a SSRS 2010 report that I’m trying to add some drill down features in List report.
My dataset has the following fields:
NAME
MANAGER
SEC_TYPE
BUYS
SALES
NEW_MONEY
AUM
My Rows groups are:
NAME – Parent Group
SEC_TYPE – Child Group
My columns are in this order NAME , SEC_TYPE, MANAGER , BUYS , SALES , NEW_MONEY,
and AUM. The NAME and SEC_TYPE groupings are visible and the individual fields are hidden.
I would like to add drill downs to report to do the following
Show consolidated view of NAME, BUYS, SALES, NEW_MONEY, and AUM only. Essentially, I want to remove all the detail that SEC_TYPE and MANAGER brings into the report.
2. When a user clicks a textbox it will expand into the view that adds the SEC_TYPE detail to the report.
3. Then when a user clicks another textbox it will expand to add the Manager detail to the report as well.
So I’m basically trying to give the user a very consolidated view and then have the ability to see more data upon request.
I think some of can visibility settings..
Any help would be greatly appreciated.
x

Drill downs are pretty straight forward. You create your tablix so it shows all of the desired data, grouped as you want. Add a Total row to show the summary data when the group details are collapsed. Then in each group properties starting from the Details
and working up, set Visibility to Hide and to be toggled by another control. That control should be the textbox in the cell for the parent group. Continue this to the point that the report initially renders in the desired consolidated view. Each cell that
controls the visibility of child groups will have a + next to it that can be clicked to expand the child groups data.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Managment cockpit(drill down settings)

Similar Messages

Maybe you are looking for