Mandatory check failed for attribute process type of business object

Hi Guys,
Im facing an error with the Mandatory check failed for the attribute process type of the business object activity.
I have the subscription business transaction customizing subscription assigned
and the transaction types are visible when I create the activity but when I assign the transaction type then the following error is seen

Hi,
did you also synchronize the adapter object CRM_DNL_PROCTYP?
Is the CDB table CDBC_PROC_TYPE properly filled in CDB respectively in your local DB?
Regards,
Wolfhard

Similar Messages

Email Alert for Process Chain for ABAP Process Type

Hi BW Experts,
                         I created a process chain based on ABAP Process Type ( for Broadcasting rsrd_broadcast_starter). I want to add alert message for each ABAP process if it is failed. But I cant see any option showing Successfull or Error or Always when I select create message option on the process type. How ever I can see for other process chain which is loading data (Process Type is Info Package ) from SAP into BW.
                         Please some one tell me why it is not showing alert message for ABAP Process Type.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jul 13, 2009 10:16 PM

I dont have the exact answer for your question, But as a work around i can suggest you that.
If these ABAP programs are included in a chain and this local chain is a part of meta chain then you can create a message on the local chain.By right clicking on the local chain >Create Message>Success
                                                                                --->Failure
>Always
Hope this resolves the problem tempervorly.I will get back to you once i have
Or the permanent solution is
Its big and also easy method to perform, by this you will be able to get all the options for a ABAP Program also.If you have any questions please let me know.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/creating%20an%20abap%20process%20type%20for%20process%20chains%20in%20bi.pdf

Bpel deployment fails for all processes that have revision other than 1.0.

Using: Release *10.1.3.3.1*
Hello All,
Bpel deployment fails for all processes that have revision other than *1.0*.
We have been attempting to deploy several BPEL projects via ANT script to a target environment and are encountering failures to deploy for every project which isn’t a (revision 1.0). We are getting the following error whenever we try to deploy a process with a revision other than 1.0:
D:\TJ_AutoDeploy\BPEL_AutoDeploy_BETA\build.xml:65: BPEL archive doesnt exist in directory "{0}"
     at com.collaxa.cube.ant.taskdefs.DeployRemote.getJarFile(DeployRemote.java:254)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.deployProcess(DeployRemote.java:409)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.execute(DeployRemote.java:211)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
     at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
The structure of our automated deployment script is as follows:
First, a batch script calls (Jdeveloper_BPEL_Prompt.bat) in order to set all necessary environment variables i.e. ORACLE_HOME, BPEL_HOME, ANT_HOME, etc for ant.
Next, the script lists every .jar file within the directory to an .ini file called BPEL_List.ini. Furthermore, BPEL_DIR, ADMIN_USER and ADMIN_PSWD variables are set and initialized respectively to:
-     “.” – point to directory where script is running from because all the BPEL processes are located here
-     “oc4jadmin”
-     “*********” (whatever the password for out environment is)
We’ve developed a method to have the script prompt the user to select the target environment to deploy to. Once the user selects the appropriate environment, the script goes through the BPEL_List.ini files and a loop tells it that for every BPEL process listed:
DO ant
-Dprocess.name=%%b
-Drev= !Rev!
-Dpath=%BPEL_DIR%
-Ddomain=default
-Dadmin.user=%ADMIN_USER%
-Dadmin.password=%ADMIN_PWD%
-Dhttp.hostname=%HOST%
-Dhttp.port=%PORT%
-Dverbose=true
(What’s happening is that the variables in the batch file are being passed on to the ANT script where *%%b* is the process name, !rev! is revision #, and so on…)
The loop goes through each line in the BPEL_List.ini and tokenizes the BPEL process into 3 parts *(%%a, %%b, and %%c)* but we only extract 2 parts: *%%b* (process name) and *%%c* which becomes !Rev! (revision number).
Example:
Sample BPEL process:
bpel_ThisIsProcess1_1.0.jar
bpel_ThisIsProcess2_SOAv2.19.0.001B.jar
After tokenizing:
%%a     %%b     %%c
bpel     ThisIsProcess1     1.0.jar
bpel     ThisIsProcess2     SOAv2.19.0.001B.jar
*!Rev!* and not *%%c* because *%%c* will return whatever the revision number is + the “.jar” file extension as illustrated above. So to circumvent this, we parse *%%c* so that the last 4 characters are stripped. Such is done like this:
set RevN=%%c
set RevN=!RevN:~0,-4!
Hence, the usage of !Rev!.
Below is a screenshot post of the ANT build.xml that goes with our script:


<project name="bpel.deploy" default="deployProcess" basedir=".">
     
     <property name="process.dir" value="${basedir}" />
          
          
     <property environment="env"/>
     
          <condition property="bpel.home" value="${env.BPEL_HOME}">
               <available file="${env.BPEL_HOME}/utilities/ant-orabpel.xml" />
          </condition>
     
     
     
     
     <property name="oracle.home" value="${env.ORACLE_HOME}" />
     <property name="bpel.home" value="${oracle.home}/bpel" />
     
     <property file="${process.dir}/build.properties"/>
     
     <import file="${bpel.home}/utilities/ant-orabpel.xml" />
     
     <property file="${bpel.home}/utilities/ant-orabpel.properties" />
     
     <target name="deployProcess">
          <tstamp>
               <format property="timestamp" pattern="MM-dd-yyyy HH:mm:ss" />
          </tstamp>
          
          <record name="build_verbose.log" loglevel="verbose" append="true" />
          <record name="build_debug.log" loglevel="debug" append="true" />
          <echo></echo>
          <echo>####################################################################</echo>
          <echo>BPEL_AutoDeploy initiated @ ${timestamp}</echo>
          <echo>--------------------------------------------------------------------</echo>
          <echo>Deploying ${process.name} on ${http.hostname} port ${http.port} </echo>
          <echo>--------------------------------------------------------------------</echo>
          <deployProcess
               user="${admin.user}"
               password="${admin.password}"
               domain="${domain}"
               process="${process.name}"
               rev="${rev}"
               dir="${process.dir}/${path}"
               hostname="${http.hostname}"
               httpport="${http.port}"
               verbose="${verbose}" />
          <sleep seconds="30" />
          
     </target>
     
</project>
SUMMARY OF ISSUE AT HAND:
~ Every bpel process w/ 1.0 revision deploys with no problems
~ At first I would get an invalid character error most likely due to the “!” preceding “Rev”, but then I decided to set rev=”false” in the build.xml file. That didn’t work quite well. In another attempt, I decided to leave the –Drev= attribute within the batch script blank. That still led to 1.0s going through. My next thought was deploying something other than a 1.0, such as 1.2 or 2.0 and that’s when I realized that if it wasn’t a 1.0, it refused to go through.
QUESTIONS:
1.     IS THERE A WAY TO HAVE ANT LOOK INTO THE BPEL PROCESS AND PULL THE REVISION ID?
2.     WHAT ARE WE DOING WRONG? ARE WE MISSING ANYTHING?
3.     DID WE GO TOO FAR? MEANING, IS THERE A MUCH EASIER WAY WE OVERLOOKED/FORGOT/OR DON’T KNOW ABOUT THAT EXISTS?
Edited by: 793292 on Jul 28, 2011 12:38 PM

Only thing i can think of is instead of using a MAC ACL , u cud jus use the default class
Policy Map Test
class class-default
police 56000 8000 exceed-action drop
Class Map match-any class-default (id 0)
Match any
You would be saving a MAC-ACL ;-).

Quantity conversion check failed for one item; all qty lines deleted

Hi IS Oil Experts,
Iam using the BAPI "BAPI_GOODSMVT_CREATE_OIL" for posting goods movement. I filled the additional quantities and unit of measures also in the BAPI table, But when tried to execute, Iam getting the error, "Quantity conversion check failed for one item; all qty lines deleted"
Please anybody tell me what is the error from end for resulting this message.
Thanks in advance
Prathib

Dear you!
I also get the issue that you meet. Can you help me to process it, Please/
Best regards, Huy.

Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3

Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejith

Welcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini

RME 4.3.1 device update failing 'WARNING : Cat3560(7.3):Consistency check failed for base package SharedNetshowIOS'

Hi Guys,
I'm having some issues updating the device packages for my RME 4.3.1 install.
I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
I pulled up the PSU.log and found the following:
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for CM already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : _CURDFMVER=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : DFMVERSION=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages] : Locking package repository..
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve] : Checking Dependencies...
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : pickUnselectedBasePackages] : SharedSwim2900XL has 17 dependent packages
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageParserAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedDcmaIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[DistributionAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibSwim] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibSwim
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimJobOptionsAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SoftwareAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ConfigAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibCommon] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibCommon
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SystemAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageListAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ContainmentAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[FlashAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[MemoryAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[RemoteStageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimCCOAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedSwimIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedSwimIOS
[ Thu May 27 10:11:50 PDT 2010 ] WARN   [PsuPkgResolver : pickLatest] : No packages to pick ..Empty package set passed .
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : populateResolverResult] : All selected packages failed consistency check..
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo] : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve] : Packages selected for install (satisfies consistency check) : []
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo] : Progress: No packages to be installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages] : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:31 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:44 PDT 2010 ] INFO   [PackageManager : installPackages] : Releasing lock...
[ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init] : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
[ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init] : Number of Events Loaded in init()6
Before i started to bug TAC, I figured I'd post this here.
Let me know your thoughts

Looks like your package repository has been corrupted. TAC can provide a procedure to recover from this corruption. The following DOC indicates why this can happen and has suggestions on how to avoid these problems from re-occuring.

Result: User equivalence check failed for user "oracle".

While installing on Solaris-10, ssh, rlogin, scp works fine.
Running runcluvfy.sh stage -post hwos -n rac-1,rac-2 -verbose returns the above error.
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
/bin/ssh & /bin/scp is in use.

Hello,
I am facing User equivalence check failed for user "oracle" error on my newly to be built RAC cluster.
The Oracle users have been created identically and ssh have been setup as per RAC installation manual.
Still I am facing the below problem. Please help me out
Node1 > uname -a
Linux purple-rac-node2 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Node2 > uname -a
Linux purple-rac-node1 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
clusterware/cluvfy/runcluvfy.sh stage -post hwos -n purple-rac-node1,purple-rac-node2 -verbose
Performing post-checks for hardware and operating system setup
Checking node reachability...
Check: Node reachability from node "purple-rac-node1"
Destination Node                      Reachable?
purple-rac-node2                         yes
purple-rac-node1                         yes
Result: Node reachability check passed from node "purple-rac-node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
purple-rac-node2                         failed
purple-rac-node1                         failed
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
[oracle@purple-rac-node1 ~]$ id oracle
uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall)
[oracle@purple-rac-node2 ~]$ id oracle
uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall)

RUNCLUVFY Result: PRVF-4007 : User equivalence check failed for user "orac

hello
try to run runcluvfy.sh I receive the following screen rac2 is passed but rac 1 is failed can sombody help me?
thanks
[oracle@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
rac1
Verification will proceed with nodes:
rac2
Checking node connectivity...

Check this older thread which has a lot of information on this:
User equivalence check failed (RAC setup)

CLUVFY failing with 'User Equivalence check failed for...'

New 2 node RAC configuration. Oracle 10gR2, Linux RHEL 5 x64. I'm at the post hardware config, pre install clusterware stage.
Running the cluster verification utility command:
cluvfy comp sys -n node-01,node-02 -p crs -verboseReturns the following error:
Verifying system requirement
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Verification of system requirement was unsuccessful on all the nodes.I've verified the following:
1) RSA keys correctly configured on both nodes and I can ssh between without a password
2) ping ip and private work correctly to and from both nodes.
3) user, group ids are identical on both systems.
I also ran cluvfy stage -post hwos -n node-01,node-02 -verbose and received the following output. This output is from node-01. node-02's is identical, except with equivalence to itself failing.
Checking node reachability...
Check: Node reachability from node "node-01"
Destination Node                      Reachable?
node-02                       yes
node-01                       yes
Result: Node reachability check passed from node "node-01".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node-02                       passed
node-01                       failed
Result: User equivalence check failed for user "oracle".
WARNING:
User equivalence is not set for nodes:
        node-01
Verification will proceed with nodes:
        node-02
Checking node connectivity...I get the same behavior on both nodes. Not quite sure what else to check. Any thoughts or suggestions? Thanks.

No, no banners. And I followed note 300548.1 to the letter. Several times :-)
However, I believe my issue has to do with a CVUHOME/cv/admin/cvu_config.
According to the documentation:
CV_XCHK_FOR_SSH_ENABLED—If set to TRUE, it enables the X-Windows check for verifying user equivalence with ssh. By default, this entry is commented out and X-Windows check is disabledIt was not, unfortunately, disabled by default - once I set it to false, everything succeeded. I still need to figure out why XCHK itself is failing, but I think I can troll through the log to figure that out.

Result: PRVF-4007 : User equivalence check failed for user "oracle"

Hi
I get below error everytime I run ./cluvfy stage -pre crsinst -n node01,node02 -fixup -verbose > a.log
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node02 passed
node01 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
node01
Verification will proceed with nodes:
node02
node01 is the local node, if I run from node02 It comes back saying the same thing about node2!
I have checked oracle uid and groups all set correctly and ssh working fine ...
I have ran the same command for grid user and getting the same error !!

i know what it was, i should have done ssh localnode date for once at least!!
I only did ssh remotenode date :)

PRVF-4007 : User equivalence check failed for user "grid"

Oracle Version 11.2.0.3.0 patched to 11.2.0.3.1
I had installed GIU and RAC db on 2 node cluster
but since yesterdy has this issue when running the commands
[grid@vmorarac2 ~]$ cluvfy comp ocr -n all -verbose
Verifying OCR integrity
ERROR:
PRVF-4008 : User equivalence unavailable on all the specified nodes
Verification cannot proceed
vmorarac1 and vmorarac2 r the two nodes
as a grid user, from vmorarac1 i ran ssh vmorarac2 and it failed with above error and vice versa
so i did the following
from vmorarac1
ssh vmorarac2
yes and enter key
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
i did the same on other node
but the problem still exists.
Edited by: 912919 on 23-May-2012 06:58

Hi,
The subject of thread "*PRVF-4007 : User equivalence check failed for user "grid*"
Now..
{code}
PRVF-4657 : Name resolution setup check for "vmorarac-scan.pbi.global.pvt" (IP address: 152.144.199.201) failed
PRVF-4664 : Found inconsistent name resolution entries for SCAN name "vmorarac-scan.pbi.global.pvt"
PRVF-4664 : Found inconsistent name resolution entries for SCAN name "vmorarac-scan.pbi.global.pvt"
{code}
If you can see are different issue.
If you are using DSN to resolve hostname "vmorarac-scan.pbi.global.pvt" check with "nslookup" if the name is resolved correctly.
If you are using Hosts File to resolve hostname "vmorarac-scan.pbi.global.pvt" you must configure only one ip (152.144.199.201) to resolve "vmorarac-scan.pbi.global.pvt" this entrie must be on host file of all nodes of cluster.
Levi Pereira

User equivalence check failed for user "oracle".

Hi,
I am trying to install the Oracle Clusterware 10g as part of my RAC setup.
I have configured RHEL 4 in 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the below error:
[oracle@rac cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n rac,rac2
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
rac
WARNING:
User equivalence is not set for nodes:
rac
Verification will proceed with nodes:
rac2
The problem is only with the first node(rac). The second node passes succesfully.
ssh works fine. Not sure what is wrong!
Thanks!

Did you do Configure SSH for User Equivalence ?
Or
Did you Establish User Equivalence ?
If yes.. please check...
$ ssh rac hostname
rac
$ ssh rac2 hostname
rac2
You should Establish User Equivalence before...
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
If You don't configure ssh for user equivalence
http://www.oracle.com/technology/pub/articles/smiley_rac10g_install.html
Or
read SSH User equivalence is not set up on the remote nodes

User equivalence check failed for user "oracle" while running cluvfy

Hi All,
I am getting User equivalence error as follows while executing cluvfy. I want to install CRS on this server.
oracle@node200$ ./runcluvfy.sh stage -pre crsinst -n node200,node201,node202
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "node200".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
node202,node201,node200
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
I have sucessfully configured ssh and able to do ssh from all the nodes without prompting for the password. Also oracle uid and gid on all the servers are same.
I also checked in .kshrc file and there is no tty entry in that file. and I have also setup /etc/hosts.equiv file on all the node.
I still get the user equivalance error. Can anybody help me in this ?
Regards,
Raj.

Hi,
thanks.
i need some more help because first time i am working on RAC,
i am also having User equivalence check failed for user "oracle"
i got two machines, one is IBM machine and one is DELL machine installed with solais 10 (AIX installation). both machines are not connected by private network now. and no shared external HDD available now. it will take one week time to set up the HW. the user equivalence check depends the above two factors?
now public network is available and node reachability test "passed"
could you please tell me what may be the reason for the user equivalence check in my case. details are given below
i have oracle user in both machine. user creation done through SMC. home directory is /export/home/oracle
the following are the details.
1) $ ssh pc000905 id -a oracle
Enter passphrase for key '/home/oracle/.ssh/id_rsa':
uid=100(oracle) gid=300(oinstall) groups=301(dba)
$ ssh pc026376 id -a oracle
Enter passphrase for key '/home/oracle/.ssh/id_rsa':
uid=100(oracle) gid=300(oinstall) groups=301(dba)
2) user nobody exists.
3) all files n .ssh directory have same permissions.
4) ssh and scp is working with out password(rsa and dsa keys generated).
5) oracle user is using bourne shell
6)soft link of /usr/bin/ssh and /usr/bin/scp are created to /export/home/oracle/bin
7)ForwardX11 is "yes" in sshd_config
8) created a config file in .ssh directory and ForwardX11 is "no" in that file
8) umask =022 in both nodes.
error displaying is
$/export/gome/cluvfy/runcluvfy.sh stage -pre crsinst -n pc026376,pc000905
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "PC026376".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
pc026376,pc000905
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
$

User equivalence check failed for user "oragrid" in HP-UX

Dear Friends,
while cluster verification utility i gotthe below error.
$ ./runcluvfy.sh stage -pre crsinst -n aeadsverp11-adp.adp.ae,aeadsverp12-adp.adp.ae -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "aeadsverp11-adp"
Destination Node Reachable?
aeadsverp11-adp yes
aeadsverp12-adp yes
Result: Node reachability check passed from node "aeadsverp11-adp"
Checking user equivalence...
Check: User equivalence for user "oragrid"
Node Name Comment
aeadsverp12-adp failed
aeadsverp11-adp failed
Result: PRVF-4007 : User equivalence check failed for user "oragrid"
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
I had configred ssh and scp on both nodes.
$ ssh aeadsverp11-adp.adp.ae date
Wed Sep 28 04:26:55 MDT 2011
$
$ ssh aeadsverp12-adp.adp.ae date
Wed Sep 28 13:28:26 WAT 2011
ssh is wrking fine without any issues on both nodes.
Please advice.
Thanks,
Rajendra

Hi,
Just ignore it and proceed with installation.
Its an bug.
Kind Regards,
Rakesh

FM to create support message for custom process type other than 'SLFN'

Hi All
Is there any function module or BAPI which will create support message for the custom process type other than SLFN.
BAPI_NOTIFICATION_CREATE is posting only for the process type 'SLFN'
Thanks in advance
Regards
Ravi

Any ideas?

Mandatory check failed for attribute process type of business object

Similar Messages

Maybe you are looking for