Mandatory data to be maintained in ECC before replacting plant to SRM

Hello Experts,
What is the minimum data to be maintained on ECC side for a plant before it can be replicated to SRM.
We are on SRM 7.0 and facing issues with some particular plant.
Thanks,
Anubhav

I think you will be following std method of Define & copy procedure to create plant in ECC which may be more than sufficient.
Please provide the error details so that it will be easy to interfere.

Similar Messages

Maintain SAP ECC (R/3) Master Data with backend validation

Hi,
I would like to maintain SAP ECC (R/3) Master Data via the Visual Composer. As far as I understand the functionality, it should be possible, if the ECC provides a BAPI to do that.
The BAPI must be able to do the same validation that we have, using the backend itself.
Now the question is whether it is possible, that the BAPI returns the result of the validation back to Visual Composer, because of course the user wants to know whether his action was successfull or not (because of invalid values for example).
Does anybody has expierences with such a requirement? Can a BAPI return something to the Visual Composer and how can I integrate such a return result in VC?
Thank you in advance.
Best regards,
Johannes

It is possible to captured BAPI's return parameters in VC.
Steps:
1.Add a Form and BAPI to the story board.
2.Now connect the OUT port of a BAPI to the IN port of FORM , this you can do by
just drag(BAPI Out port) and drop( FORM in port).
3.Add a Expression Box in FORM.
4.Display the values returned by BAPI in the expression box(Use formula)

ERROR PROCESSING FILE "5016: A mandatory data element is missing"

B2B errors while processing file, following is from b2b.log...
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A0101461190FFFF40D0000017918FE0-1</b2bMessageId>
<errorCode>AIP-51505</errorCode>
<errorText>5016: A mandatory data element is missing.</errorText>
<errorDescription>
<![CDATA[Machine Info: (falken8.falkentire.internal)
Segment GS(Functional Group Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 1{br}{tab}Character: 105 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="InterchangeControlStandard_RepeatingSeparator" value="U"/>
<parameter name="InterchangeTrailerControlNumber" value="000000862"/>
<parameter name="InterchangeChildCount" value="1"/>
<parameter name="InterchangeTime" value="1205"/>
<parameter name="InterchangeUsageIndicator" value="P"/>
<parameter name="ErrorScope" value="Interchange"/>
<parameter name="SubelementDelimiter" value=">"/>
<parameter name="RepeatingSeparator" value=""/>
<parameter name="InterchangeSecurityInfo" value="Y "/>
<parameter name="InterchangeReceiverQual" value="12"/>
<parameter name="DecimalSeparator" value=""/>
<parameter name="InterchangeAuthorizationInfoQual" value="00"/>
<parameter name="ElementDelimiter" value="*"/>
<parameter name="InterchangeComponentElementSep" value=">"/>
<parameter name="InterchangeControlVersion" value="00401"/>
<parameter name="InterchangeAckRequested" value="0"/>
<parameter name="InterchangeSenderQual" value="08"/>
<parameter name="InterchangeReceiverID" value="6262810170 "/>
<parameter name="ReleaseCharacter" value=""/>
<parameter name="InterchangeDate" value="080321"/>
<parameter name="SegmentDelimiter" value="
"/>
<parameter name="InterchangeControlNumber" value="000000862"/>
<parameter name="InterchangeAuthorizationInfo" value="X "/>
<parameter name="InterchangeSenderID" value="9252671859 "/>
<parameter name="InterchangeSecurityInfoQual" value="00"/>
</errorDetails>
</Exception>
We are using EDI X12 over generic exchange. I double checked ecs file and data file. Passing all the mandatory elements. Also checked the delimeters and they match from datafile to setup.
Anyone have faced this error before? We opened a SR with Oracle and they are not able to figure it out. Please help.
Thanks
Venkat

Ramesh,
To give you a little background I used Spec Generator functionality to create ecs from dat file. Then I did an export to OracleAS Integration B2B format which generated xsd file. I also analyzed (using preprocessor) giving both ecs and dat file and it passed with no errors.
Following your suggestion I now excluded ISA/GS guidelines from the ecs file, exported to xsd and tried to process the dat file, and it gives following error messages now...It doesn't even identify the trading partner now. Please advise. Thanks
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:2619)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1365)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
     at java.lang.Thread.run(Thread.java:534)

Master Data Creation/Maintenance Automation for ECC to SNP

We are starting an SNP project using SCM 7 and ECC 6. We use PP/DS and G-ATP but have maintained our PPM's in APO only all these years. This will be our first time to leverage ECC data for an APO use in either PPM or PDS functionality.
We have targeted our Material/BoM/Routings to be CIF'ed over to SNP to create SNP PDS's. To do this we are going to need to create several hundred new BOM's and several thousand Production versions in ECC. We know which materials and usages we need to do this for and would like to find a way of creating these in ECC using some automated process. Could you please provide any information on options that are available to either automate this data creation or a way to upload this information via a spreadsheet to ECC.
I would also be interested in any information on how to streamline and automate the COST data maintenance. We are planning on utilizing the optimizer and will have bunches of cost data to maintain. Is there a way to load the PDS Single Variant Costs that are maintained via PDS_MAINT and CURTO_CREATE over to SNP. Also if there are any automated ways of loading all the other cost data that is maintained only in SNP that would be great.
The main question ultimatly is... How do you create and maintain the SNP data in an automated way to minimize the amount of master data the SNP users need to touch.
Thansk for any information on this!

Hi Tim
I will suggest to user LSMW program for creating BOMs and other material master elements in R/3 system.
This is simple and easy way for mass upload of material master.
For APO Side, you can also LSMW program or MASSD (T-code) for updating the data in Mass
Thanks
Amol

Mandatory date field validation different if using a custom form... why?

We are using SharePoint 2013 and have a custom list in which one of the fields is a mandatory date/time field. When using the default "New" form, if I don't add any date and click the Save button, the form looks like it is submitted and then
comes back with some red text indicating that I need a value for my date/time field. If I simply create a new custom "New" form, and then click on the Save button without adding my date/time value, I get a black (not red) validation error.
A couple things are going on here. The error is displayed BEFORE any submit happens, unlike when using the default New form. The validation message is different and is listed in black rather than red. For other mandatory fields, the form
does get submitted and then displays the validation error in red, although it is a different validation error message than when using the default New form.
I don't care that the text is different, but it is an issue for us that the text is not in red. Does anyone know why this is happening?
Thanks - Peter

Hi Peter,
According to your description, my understanding is that you want to the alert message is red in the custom New form.
Please open the custom New from in SharePoint web site, and save without type anything in the data field, then the alert message(black) displays. Click on F12 to open IE developer debug tool, click on the arrow , then click on the black message to find the
HTML element id for the message, in my test, the id is ctl00_ctl42_g_fed984e8_446c_4fdb_a279_328c2c369be5_ff21_ctl00_ctl00_DateTimeField_ctl00 .
Then click on Settings->Edit page, add a Content Edit web part to the custom New form page, edit the web part and add the following code into the Edit Source of the web part:
<style type="text/css">
#ctl00_ctl42_g_fed984e8_446c_4fdb_a279_328c2c369be5_ff21_ctl00_ctl00_DateTimeField_ctl00{
color:#FF0000;
</style>
If you have multiple mandatory fields, you need to find each id for each field alert message, add #id{…}
into <style …> </style> section.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

Error message "Data cannot be maintained for set type COMM_PR_PUR_1

Hi
While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
Thanks

Hello,
>
BNR wrote:
> Hi
> While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
>(...)
Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
Regards.
Laurent.

On powering up I got a message date and time were changed to before 2008. Why would this happen?

I used the computer this morning to check email. Shut it down and powered back up this afternoon and a box appeared telling me the date and time were set for before 2008 (actually for 12/31/2000) and needed to be reset. Why would this happen?

No, it had 3:30 hours left. I make it a point of not letting it drain. I haven't had a problem since then, so I'm hoping all is ok. Thanks

Foreign trade data cannot be maintained in Billing Cancellation (S1)

I am trying to release to accounting a S1 document, but I am getting a foreign trade data error.
I went to maintain the header foreign trader data of the billing cancellation document (S1), but this section is grayed out
and the system wont allow change.
Is there any way I can maintain or fix this data, so I do not accumulate junk?
Any opinions appreciated
regards
Hanarin

Cathy,
Thanks for the reply.
To add a bit more information, F1 document is released to accounting.
Foreign trade data was not maintained, and was able to be released to Accounting (along with CO-PA)
with no issue. It is just when this document was cancelled via S1 that the system started complaining about Foreign Trade Data.
Thank you
Hanarin

Please help: Message no. M7090/Accounting data not yet maintained

To whom it may concern-
I am currently a student attending LSU working on an SAP project worth a very significant portion of our grade. The following is a detailed description of the problem, which should hopefully help you put your finger on a solution.
My problem is that when I try to hit the accept button on PP10 for a goods issue, I get an error message "Accounting data not yet maintained" (please refer to attached screenshot #1). When I click the help button, I get a vague solution (please refer to attached picture #2). I have tried and "change" my material master record for Cushion 065 by going back to MM06/create material master for trading goods (please refer to attached picture #3), but I don't have the understanding of SAP to manipulate the information at this point. It is just giving me the ability to manipulate views and it is only letting me choose the following views (please refer to attached picture #4).
Please help me find a more useful pathway so I can proceed. If whoever is helping me needs me detailed information, please let me know. Also, if someone could direct me to a user support function where I can talk to a representative in real time, I would appreciate that.
Mack Bradford

Extend the Accounting view with Tcode :MM50
Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
Regards,
Ramesh

How to transfer classification data (class type 001) in ecc to crm

Hi. dear
I have a problem in transfering classification data (class type 001). we use classification data in material (mm01) in ecc, class type is 001, but now I have to transfer the classification data to crm.
i had downloaded the CLASS,ATTRIBUTE and OBJCL,MATERIAL,but i don't see classification data in crm.
please let me konw :
(1) how can i transfer classification data (class type 001) to crm.
(2)how can i see these data in crm
thanks
zong

first, very thanks , i had seen the note 428989, but, i wonder if there are other method to resovle the problem.
In ecc, the classification data have many charicter ,but ,in crm, how can i display the classification data . in product data,of crm, i cannot see any tab to display the data. what can i do in crm to display the classification data.

Installed Base(ibase) data for segmentation/maintaining customer marketing

There is a need to use Installed Base(ibase) data for segmentation/maintaining customer marketing attributes e.g. whether customer on active support agreement(yes/no), product line, version no., etc.
So if the ibase data is updated, the changes should flow back to segmentation/marketing attributes of the business partner/
Please help with any approach which can be useful in this scenario.
Edited by: ankitarora on May 4, 2011 12:42 PM

Please find the reply for your query,,,,,these are the related information
LIST OF DATA SOURCE
CRM IBase Transaction Data
0CRM_SRV_IBASE_TRAN
CRM IBase Master Data
Technical name: 0CRM_SRV_IBASE_ATTR
Installed Base Category - DataSource for Texts
Technical name: 0CRM_IBTYPE_TXT
Characteristic for IBase or Component - DataSource for Texts
Technical name: 0CRM_IBFLAG_TXT
GUID of Installed Base/Component - DataSource for Texts
Technical name: 0CRM_IBAKEY_TXT
IBase Text Component - DataSource for Texts
Technical name: 0CRM_IBTEXT_TXT
DSO:
CRM Service - Installed Bases and Components
Technical name: 0CRM_IBCO
QUERYS
Installed Base Analysis by Location
Technical name: 0CRM_IBCO_Q0101
Installed Base Analysis by Business Partner
Technical name: 0CRM_IBCO_Q0104
Analysis of Products in Installed Bases
Technical name: 0CRM_IBCO_Q0102
Analysis of Individual Objects in IBase Components
Technical name: 0CRM_IBCO_Q0103
More information
http://help.sap.com/saphelp_nw70/helpdata/EN/ef/c4e1edcb84fa4abd6ddd00130de600/frameset.htm
For more information, see the CRM documentation under mySAP Business Suite à mySAP Customer Relationship Management à CRM Enterprise à Analytics à Service Analytics.
Regards
Srini

Master Data Cannot Be Maintained

Dear All
I want to view the Master Data for the standard Object.
But when i right click the object and click on Maintain Master Data it gives the following error:-
"Master data cannot be maintained for characteristic 0CRMPROD_ID."
Please guide me on this.

Hi Anup Chaudhari ,
Did u load master data into that Infoobject.
First load the master data using Infopackage after that you can check the master data by using
Right click ---> maintain master data.
Second thing is:
Is there any lock message if it is check the attribute change run job once.
Thanks,
Kiran Manyam

No error on not filling the Mandatory Data elments

While using both COM & SOM functionality, many a times manual tasks can be completed even when the mandatory data elements are not filled and no error is shown.

Generally speaking, OSM will refuse to allow a task to transition to a completed state if the number of instances of each piece of data visible to that task is not between the min and max cardinality (inclusive).
If you can provide more details on the problem that would be helpful to understand what is happening in your scenario.
Brian Dueck
Vice President - OSM Strategy and Design

Accounting data not yet maintained for material 2010 R-1130-40

Hi Guys
I was trying to post a goods issue, but having a error that says -
accounting data not yet maintained for material 2010 R-1130-40
I then tried MM02 to maintain the accounting view, but also having an error that says -
accounting 1 not active for the organizational level.
Any ideas please as to what to do.
Chears
Kofiyahya

Extend the Accounting view with Tcode :MM50
Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
Regards,
Ramesh

Mandatory data to be maintained in ECC before replacting plant to SRM

Similar Messages

Maybe you are looking for