Mandatory Fields and Navigation Buttons
Hi
I have a search form where I search by number, then I have the choice to update and submit the request. All fields are required for submission. The problems is that when I have empty fields I cannot use the search and navigation buttons, I tried to set Immediate to true but then the buttons would not perform their action. How can I solve this?
Your help would be appreciated
Hi,
immediate works in the combination with response complete. However, because you are omitting the model update you will have to do this manually in an action method or action listener
Frank
Similar Messages
-
I like to clean things out on a regular basis but when I run the Norton Clean-up utility all of my custom toolbar and navigation button settings get reset to 'factory' condition. How can I permanently save these changes to my config or preference settings?
Cookies, Completed Forms, .tmp files are all that's set to be cleared. If I can identify the appropriate elements I can protect them from deletion. Does anyone know?
-
Document Numbering Series and navigation buttons in SBO
Hi there,
A new set of document numbering is created for new financial year.
e.g. SO11-100001 is for financial year 2011 and SO12-100001 is for financial year 2012.
Due to this setup, we have encountered a problem to use SAP navigation button to search between documents such as when I continue to click u201CNEXTu201D button, the documents would be popup in following sequence:
SO11-100001 SO12-100001 SO11-100002 SO12-100002 u2026u2026
Is there a way to just navigte through SO12 series documents only?
If I use series grouping under "Authorizations", this will totally block the previous year's documents. There may still be open docuemnts from last year and therefore, using "Authorizations" is not a wise option.
If there is a workaround, kindly share with me.
Thanks,
Yadanahi Yadana
in that case u can create a user query displaying the fields u want on the basis on the period indicator i.e. 2011 & 2012
hope this would suffice your concern
Regards,
Manish -
Framesets and Navigation buttons
Greetings All:
Now I know what you're going to say first, "don't use
framesets", yada, yada, yada, however, I have had some success.
But, I'm having a problem with two navigation buttons. I have
linked the buttons to the main frame in the inspector as the
instructions tell me. For the "Events " and the "contacts " button
when I click on them I see an error page not found message. Below
is the link to the site. Please advise on what I can do to fix this
problem. The framesets work best for our purposes. Thank you in
advance for your help.
http://www.broward.k12.fl.us/silverlakesms
NGThe percent of times that they *are* the best way to go is
vanishingly
small. So, you are much safer saying "they are bad" than
saying "they are
good" by a long shot. In fact, they are awful, particularly
in the hands of
someone who doesn't understand frames and how they work, and
why they work,
and why you shouldn't use them.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pizza Good" <[email protected]> wrote in message
news:[email protected]...
> First of all, anyone that says "don't use framesets"
does not understand
> that sometimes they actually are the best way to
go...same thing goes for
> tables.
>
> Anyway...back to your problem.
>
> When I click on the "events" or "contacts" it works
fine. I did notice
> that the URL that appears in the status bar (bottom) of
IE is showing a
> weird URL...after the last / it shows another
www.xxxxxx.com.
>
> Am I testing the wrong link?
>
>
>
>
> "ngros" <[email protected]> wrote in
message
> news:[email protected]...
>> Greetings All:
>>
>> Now I know what you're going to say first, "don't
use framesets", yada,
>> yada,
>> yada, however, I have had some success. But, I'm
having a problem with
>> two
>> navigation buttons. I have linked the buttons to the
main frame in the
>> inspector as the instructions tell me. For the
"Events " and the
>> "contacts "
>> button when I click on them I see an error page not
found message. Below
>> is
>> the link to the site. Please advise on what I can do
to fix this
>> problem. The
>> framesets work best for our purposes. Thank you in
advance for your
>> help.
>>
>>
http://www.broward.k12.fl.us/silverlakesms
>>
>> NG
>>
>
> -
Locking address bar and navigation buttons Safari
With the new iOs 7 I have several issues with Safari.
Whenever I scroll down a page in Safari the navigation buttons (back/forward) dissappear and the address bar becomes a lot smaller. Any way to disable that?
Is it possible to show the full URL always?
The Google search box is missing, is there any setting to restore it to a seperate box instead of via the address bar?
Browsing through the open tabs now looks like a card catalog, not really an issue but only half the page is visible where it used to be the whole page.
Everything has changed so much, aggressive colors, buttons that don't look like buttons. I wish I could tweak everything a lot more.Really really need to see the full URL in the URL bar. A top level domain alone is pretty much worthless and makes web browsing extremely difficult. How do I restore the full URL??
-
Hosting and navigation buttons
Hi all. I'm really liking Edge reflow as it's a nice and easy way of designing a site, but I'm stuck at something: How can I make navigation buttons and will it be possible to use the files of the website to put the site online? If so, how can I do this?
Excuse my ignorance, I have zero web skill.Edge Reflow is not meant to build a complete website. The word 'reflow' says it all, this tool is meant to design a page that reflows nicely on various screen sizes (tablet, phone, desktop,...). As of now it's not possible to link elements to pages, thus making it impossible to use Edge Reflow to create a website consisting of more than one page.
-
Signature field and submit button not working
I recently upgraded to LiveCycle Designer ES2 and am having problems with some functionality. I created a form with 3 signature fields and a submit button for the final signator to email the form back. None of the signature fields work; neither does the submit button. I did everything the same as I had in the previous version of the software. However, it appears that there have been some changes that I'm unaware of. I read about locking objects, but got a little confused. Can someone tell me (in very lay terms) what I need to do to get these functions to work?
George,
Then, I guess I don’t know what I’m looking at. When I look at the document properties, it shows that rights have been granted. See the screen shot below.
Would you tell me how I should enable Reader?
Gloria
Gloria Díaz
Gloria Díaz -
Issue with fill in the blank field and back button.
I am working in CP4 AS2. I have create a page of fill in the blank fields to simulate filling in a form. On the next slide, I show the answers by extracting the variables into text boxes. I have a back and a next button and instruct the user to review their answers and if incorrect, to select the back button in order to reenter the data. I have the back button set to jump to the previous slide by number (i've tried previous, last slide, etc...)
The flash movie freezes when I select the back button. I think flash is having trouble going back to the fill in the blank fields from the displayed variables. Any ideas? or work arounds for this. The idea solution would take them back to the page with the data already in the fields so they could correct the errors only and then return to the review page.
Thanks
ScottHi there
Is scoring enabled on these? If so, perhaps your quiz settings are preventing backward movement.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Make unit price as a mandatory field and using FMS
I would like to use FMS for provide price as a mandatory filed in Purchase order .
I created UDF and made it as a mandatory and I refered it's value to Unit price but during UDF definition system asks me default value so when I create purchase order the udf has a value and it makes problem.Hi
It can be done by FMS .
You need to put clause like ..where $[$userdefined field] =' '
Please test this in your environment .If this didn't help ,then you have to go for Store procedure .
Thank you
Bishal -
Form validation error with mandatory fields and signature field
Hello,
I have seen that many other users are facing this issue, and they partialy do solve it with some workarounds. However, none of them applies to my case.
I have a dynamic form (can be registration form for example) where user fills in bunch of fields. Some of them are mandatory.
When user signs the form, I get our favourite validation error popups that filed this and this did not validate. (I think that the signature is not valid too once I get these errors).
Workaround would be to set all fileds in the form as optional, however, the presign and postsign events work only in A9 and I need the form to be compatible with ver. 8 too.
I also need to make sure, that they are not set to optional, if the signing fails, user clicks on cancel etc...
Any ideas how to acomplish such a scenario?
Thanks
J.solved by myself.
You have to install and configure the reader rights credentials mentioned in note 736902 -
On my laptop running windows 7 all the info displayed at the top of the homepage window is missing. All headings, i. e. File, Edit View, etc. are gone. There is no address bar. There is no home button, refresh button, etc. My wife was using the machine when it happened so I don't know what she did. How do I restore these features?
F11 did not work F10 did. ThaNK YOU FOR THE HELP
-
PDF Form Mandatory Field Validation Issue in Workspace
If we open a PDF Form with mandatory fields (e.g. Mortgage-Prebuilt sample PDF form) in Workspace and then click the Workspace Complete button without completing the mandatory fields, there will be mandatory validation check which will highlight all the mandatory fields and display the mandatory fields error message dialog box.
However, if we click the Workspace Complete button again afterwards, the mandatory fields error message dialog box will not be displayed. The dialog box will be displayed only if our mouse is moved to any active/enabled fields/buttons in PDF form.
Does anyone encounter this strange issue before?
Kindly advice what should we do to solve this issue.Hi Patrick,
As this is the modal popup, there is a close button .
Now in the ACTIONS tab try to create an action for CLOSE.
Once you get the window reference,
wd_comp_controller->gref_w_popup_split type ref to IF_WD_WIINDOW.
SET_ON_CLOSE_ACTION
SET_CLOSE_BUTTON
CALL METHOD wd_comp_controller->gref_w_popup_split->set_close_button
EXPORTING
close_button = abap_true.
CALL METHOD wd_comp_controller->gref_w_popup_split->set_on_close_action
EXPORTING
view = wd_comp_controller->gref_v_controller_split
action_name = wd_assist->gc_close_split.
"Action Name
In the CLOSE action -
IF wd_comp_controller->gref_w_popup_split IS NOT INITIAL.
CALL METHOD wd_comp_controller->gref_msg_manager->clear_messages
EXPORTING
including_permanent_msg = abap_false
only_permanent_msg = abap_false.
CALL METHOD wd_comp_controller->gref_w_popup_split->set_close_in_any_case
EXPORTING
close_in_any_case = abap_true.
CALL METHOD wd_comp_controller->gref_w_popup_split->close.
ENDIF. " if wd_comp_controller->GREF_W_POPUP is not initial.
Regards,
Lekha. -
Mandatory fields error as soon as CreateInsert is invoked
Hi!
I have a table with a button which invokes createInsert operation.
As soon as I click it, I get error messages of mandatory fields and they are colored in red, obviously they are empty as I've just click the "Add Record" button...
What I'm doing wrong?? Jdev=12.1.2
Regards,
Jose.Hi Jose
You need to execute your CreateInsert through an actionListener,
The code will be like
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding method = bindings.getOperationBinding("CreateInsert");
method.execute();
AdfFacesContext.getCurrentInstance().addPartialTarget(form); //Or table or PanelGroup
//To avoid validation triggered.
FacesContext.getCurrentInstance().renderResponse();
Then revert the changes you did to the immediate = true etc. -
Yes, No and Cancel Buttons on Pop-Up for BACK or NEW button
Hi Experts,
First scenario:
We have crated few mandatory fields in incident when ever we are not filling the mandatory fields and try to SAVE (Incident Tool bar button) the Incident, it will Check for any Error Messages, before saving the Document,
If entries not found in mandatory fields record will not get saved.
This functionality we are controlling in EH_ONSAVE method of the SRQM_INCIDENT_H/IncidentOV.
Second scenario:
But After filling few fields in Incident screen, If I click on NEW button for a new incident or BACK button , it give one popup with message Do you want to save the changes ? With Buttons Yes, No and Cancel. If I click on the Yes button Incident gets saved with an IRN number without entry of any mandatory data.
How can I control the second scenario as first scenario? Please suggest how to controll Yes, No and Cancel Buttons on Pop-Up for BACK or NEW button as SAVE button.
Thanks in advance
Chandhi,
you can control the pop-up SAVE button without saving your details or write your ownlogic on pop-up save.
please refer to this post.
Re: Suppress POP-UP
regards
Ismail -
Mandatory fields in the Conditio Records
Hi,
The question is;
When we maintain the condition record for pricing, we find that certain fields are mandatory and certain fields are not mandatory in a key combination.. Where and how is the mandatory setting set to the fields?
Thanks in advance,
FazalHi Fazal,
All the fields of the condition record are mandatory. Once u define the fields in the condition table, they become mandatory in the condition record.
For ex. if my condition record consists of Customer, material, and sales orgn, then i need to maintain all the fields in the condition record with out which the condition record will not be found.
Cheers,
Hi Anil,
Considering your example of a table consisting of fields Customer, material, and sales orgn; when i go to VK12, enter the condition type and select the key combination consisting of the above fields, the sales org would be mandatory or the sales org and the customer would be mandatory fields and material would not be mandatory before execution.
If I give the material details then the specific condition record is the output, but if the sales org is the only mandatory field and i enter that and execute then it gives me a huge list.. Now, my question is how do you make this feild (sales org) mandatory or rather see it a mandatory entry in the VK12 screen???
Regards
Fazal
Maybe you are looking for
-
Sample application not working
hi, i am a newbie to javawebstart.. i have 2 questions 1) i downloaded the sample application from the net ( http://java.sun.com/developer/releases/javawebstart/) and was trying the "LibInstaller" sample.. i have been able to run step 1 (ant main : c
-
I can't figure out how to log off of my daughter's iTunes account that has been loaded to my PC. When I want to sync my iPhone, I get her data, not mine.
-
Ipod touch says 'cannot connect to iTunes store' when i download an app???
I have the ipod touch 4th generation and have updated to ios 6. My problem is that sometimes when i try to download apps my ipod says 'cannot connect to itunes store' But then afterwards it starts working again. Is there a way to fix this permanent
-
Type the name and password of a user in the "(null)" group to allow this.
To connect to wifi while in the recovery partition, I'm asked to authenticate the wlan's certificate, and in order to do that I'm asked for "the name and password of a user in the "(null)" group" to make changes to the Certificate Trust Settings. Any
-
My screen is not turning when I turn the iPad
My screen is not turning when I turn the iPad. I need help so if I turn my the screen should turn