Mandatory fields error as soon as CreateInsert is invoked

Hi!
I have a table with a button which invokes createInsert operation.
As soon as I click it, I get error messages of mandatory fields and they are colored in red, obviously they are empty as I've just click the "Add Record" button...
What I'm doing wrong?? Jdev=12.1.2
Regards,
Jose.

Hi Jose
You need to execute your CreateInsert through an actionListener,
The code will be like
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding method = bindings.getOperationBinding("CreateInsert");
method.execute();
AdfFacesContext.getCurrentInstance().addPartialTarget(form); //Or table or PanelGroup
//To avoid validation triggered.
FacesContext.getCurrentInstance().renderResponse();
Then revert the changes you did to the immediate = true etc.

Similar Messages

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Mandatory fields error messages in HCM forms and processes

Hi,
This may sound to be a very simple problem but I am unable to get to the root of the issue and thus need an expert advise here.
I have created several forms in the system out of which one is an OM form using SAP_PD service for create position. There are few mandatory fields in the form scenario such as
TITLE
ABBREVIATION
EMPLOYEE GROUP
EMPLOYEE SUBGROUP
As expected, system issues an error message if these field are left out blank but the error message is generic for all the fields and is missing the field name.
Actual Error Message
Complete the required entry field ""
Expected Error Message
Complete the required entry field "Employee Group"
Complete the required entry field "Employee Subgroup"
However, there are couple of fields in the form scenario which issues a correct error message
Complete the required entry field "Object abbreviator" (P1000-SHORT)
I am unable to identify the difference between the couple of fields that issues a correct message and rest 20 other fields which doesn't.
Regards,
Murtuza Kharodawala

No, if I enter all the mandatory fields on the form then there is no problem. It allows me to move ahead and submit the form successfully.
As recommended by Siddharth, I tried debugging the message class and what I observed was it passes the complete_fieldname value as Personnel Subarea (I1008_BTRTL) and system expects it to be I1008-BTRTL.
SAP as a fallback tries to read description from the table T5ASRFSCNFLDT but it has a_form_scenario as blank and complete_fieldname has a concatenated value "Personnel Subarea (I1008_BTRTL)" instead of "I1008-BTRTL".
Not sure what am I missing which causes it to have this wrong error message.
Regards,
MK

PDF Form Mandatory Field Validation Issue in Workspace

If we open a PDF Form with mandatory fields (e.g. Mortgage-Prebuilt sample PDF form) in Workspace and then click the Workspace Complete button without completing the mandatory fields, there will be mandatory validation check which will highlight all the mandatory fields and display the mandatory fields error message dialog box.
However, if we click the Workspace Complete button again afterwards, the mandatory fields error message dialog box will not be displayed. The dialog box will be displayed only if our mouse is moved to any active/enabled fields/buttons in PDF form.
Does anyone encounter this strange issue before?
Kindly advice what should we do to solve this issue.

Hi Patrick,
As this is the modal popup, there is a close button .
Now in the ACTIONS tab try to create an action for CLOSE.
Once you get the window reference,
wd_comp_controller->gref_w_popup_split type ref to IF_WD_WIINDOW.
SET_ON_CLOSE_ACTION
SET_CLOSE_BUTTON
CALL METHOD wd_comp_controller->gref_w_popup_split->set_close_button
        EXPORTING
          close_button = abap_true.
      CALL METHOD wd_comp_controller->gref_w_popup_split->set_on_close_action
        EXPORTING
          view        = wd_comp_controller->gref_v_controller_split
          action_name = wd_assist->gc_close_split.
   "Action Name
In the CLOSE action -
IF wd_comp_controller->gref_w_popup_split IS NOT INITIAL.
      CALL METHOD wd_comp_controller->gref_msg_manager->clear_messages
        EXPORTING
          including_permanent_msg = abap_false
          only_permanent_msg      = abap_false.
      CALL METHOD wd_comp_controller->gref_w_popup_split->set_close_in_any_case
        EXPORTING
          close_in_any_case = abap_true.
      CALL METHOD wd_comp_controller->gref_w_popup_split->close.
    ENDIF.                      "   if wd_comp_controller->GREF_W_POPUP is not initial.
Regards,
Lekha.

Seeburger BIC mapping error(on changing mandatory fields)

Hi Experts,
I am working on IDOC to EDIFACT file scenario with seeburger.
Earlier my end to end scenario was working fine. I got a requirement to change all the mandatory fields of segment NAD into non mandatory field. To acheive this i changed my Seeburger BIC mapping and target XSD in PI. After this process i create .sca file and ask basis to upload it.
But after deployment i am getting error in communication channel where i am using BIC mapping. The error is message is quite big, still i am attaching a part of it. Please help
Message processing failed. Cause: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: BICMapping: runMapping() FATAL ERROR: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) Stacktrace: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:95) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105) at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336) at sun.nio.cs.StreamEncoder$CharsetSE.implWrite(StreamEncoder.java:395) at sun.nio.cs.StreamEncoder.write(StreamEncoder.java:136) at java.io.OutputStreamWriter.write(OutputStreamWriter.java:191) at java.io.BufferedWriter.flushBuffer(BufferedWriter.java:111) at java.io.BufferedWriter.write(BufferedWriter.java:212) at java.io.Writer.write(Writer.java:126) at com.seeburger.jucon.dochandler.util.GrammarFileWriter.write(GrammarFileWriter.java:262) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:234) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:390) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiDocWriter.write(EdiDocWriter.java:367) at com.seeburger.jucon.dochandler.InhouseDocWriter.flush(InhouseDocWriter.java:884) at com.seeburger.jucon.mapping.Mapping.run(Mapping.java:2429) at com.seeburger.jucon.seebicapi.BICMapping.runMapping(BICMapping.java:1724) at com.seeburger.jucon.seebicapi.BICMapping.run(BICMapping.java:2518) at com.seeburger.jucon.seebicapi.BICMapping.startSyncMapping(BICMapping.java:1415) at com.seeburger.bicxiadapter.CCIInteraction.convert(CCIInteraction.java:1201) at com.seeburger.bicxiadapter.CCIInteraction.convertCalledFromModule(CCIInteraction.java:911) at com.seeburger.bicxiadapter.CCIInteraction.execute(CCIInteraction.java:313) at com.seeburger.xi.api.cci.impl.nw71.SeeXIInteractionProxy71.execute(SeeXIInteractionProxy71.java:86) at com.seeburger.bicxiadapter.module.CallBicXIRaBean.process(CallBicXIRaBean.java:384) at com.seeburger.xi.api.module.impl.nw71.SeeModuleAdapter71.process(SeeModuleAdapter71.java:78) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal
java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:169) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:266) DESCRIPTION: BICMapping: FATAL ERROR: Internal Fault. Class could not be load or instatiated. Check Installation, access rights. Last error: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes)
Regards,
Shradha

Hi,
Even I faced a Similar problem...
1) make sure that the size of the data that is coming to BIC map is not larger than the size defined in the Source field (Check In BIC and SAP XI/PI map.
2) Make sure id any other seeburger mapping are working fine , This is because you have to deploy the file in form of Active mapping.sca in SAP XI/PI after the changes are made on BIC side.
3) Check the Adapter Engine Cache ...
Hope this helps..
Regards,
Sainath Chutke

Making a UI field mandatory and error out on save if no entry made

Hi Experts,
I have a requirement to make a UI field mandatory and not allowing the opportunity to save if the field has no entry selected out of a DDLB. I marked the field mandatory in the config page and it displays an error message if it is left unentered but still allows to save , ie even with the error message u can save the opportunity.
How can I get this to work and not allow save if the field is entered?
I tried putting a check in the DO_FINISH_INPUT and DO_VALIDATE_INPUT but didnt work........ please help

Arpita,
This is a standard program bug with opportunity screen. Fix it by applying SAP Note 1353553 - Opportunity: Behavior of mandatory fields in Web UI

Hide the error msg for the mandatory fields

hi
how can i hide the error msg for the mandatory fields when they are not entered?? when i don't put a value in a mandatory field and commit the form, an error msg occurs teelling to enter the value for that mandatory field, but the error msg is not friendly at all and i want to hide it.
thnaks

User,
I'll assume you are talking about ADF Faces + ADF Business Components application, since you don't mention it.
If you are talking about the pop-up Javascript dialog box that pops up, you can do the following:
1). Set required=false on those fields in your JSP.
2). Set showrequired=true on those same fields so that there is a visual indication that the fields are required
3). Ensure the attribute to which the fields are bound have "mandatory" set to true in the BC's
Now, when you commit the form, you will not see the Javascript pop-up, but you will see a message in the af:messages component.
Best,
john

Error in ESS Mandatory field for Address(0006) Sub type 1

Hi Experts ,
       I configured certain fields as mandatory fields in the tables V_T588MFPROPC & V_T588MFPROPS for Address(0006) sub type 1. It is working fine in my development system and quality system . The same configuration is moved to production , it showing the error "fill all required fields" . Aprat from th V_T588MFPROPC & V_T588MFPROPS any other table to configure for mandatory filed.
with regards
Renjith

Hi Renjith ,
Kindly check the below,
1. check the badi implementation of HRXSS_PER_BEGDA
2. Check whether the note 1044777 is implemented in system
     1044777 -   Inconsistency in date handling of ESS PersInfo
3. Also this may be because of back end data also, try to create a new set of data with all the required fields and try to   edit     the same in portal because most of this issue may occur because of data.
Regards,
Meera

Mandatory field validation error occurs when user cancels out of blank "cre

Hi - I'm building an application using Oracle 10g 9.0.5.2, with ADF/UIX/Struts.
I followed the technique described in the tutorial
http://otn.oracle.com/obe/obe9051jdev/uixtutorial/lesson_uix.htm
In that example they have a page called BrowseDeptEmp. On this page is a
create button, which is linked to a /createEmpAction before displaying the
FormEmp uix page, where the user is supposed to enter new employee data.
So I did the same thing, but I added a cancel button on the FormEmp.uix page.
If the user presses cancel on the FormEmp page, it goes through a 'rollback' DataAction (with a rollback operation dragged on it) and then back
to the main page.
here's my problem:
If the user
1. clicks the create button on the BrowseDeptEmp page
2. Sees the blank form in the FormEmp page
3. Changes his mind (does not want to add a new employee) and clicks cancel
The FormEmp page displays validation errors on the fields that are mandatory in the DB! So the user
can't cancel out of the create page unless he fills in the mandatory fields...!!
How do I cancel out of a create page 1) without entering any data on the page and 2) without getting
mandatory field validation messages?
It must be simple but i can't figure it out....
Please help :)
Thanks
Des

I don't understand how this can happen if the user has not entered any data.
Is there a commit action somewhere that is being triggered before the rollback?
is your cancel button a submit button?
one way to fix this is to convert the submit button into a
regular button and have the regular button go directly to your DataAction (the one with the rollback).
you can automatically create this button by drawing a pageLink from the page to the DataAction in the page flow diagram.

Check duplicate data entry in multi record block,which is a mandatory field

Dear all,
I have a situation where i have to check duplicate data entry(on a particular field,which is a mandatory field,i.e. it cannot be skipped by user without entering value) while data key-in in a Multi Record block.
As for reference I have used a logic,such as
1>In a When-Validate-Record trigger of that block I am assigning the value of that current item in Table type variable(collection type)
as this trigger fire every time as soon as i leave that record,so its assigning the value of that current time.And this process continues
then
2>In a When-Validate-Item trigger of that corresponding item(i.e. the trigger is at item level) has been written,where it compares the value of that current item and the value stored in Table type variable(collection type) of When-Validate-Record trigger.If the current item value is matched with any value stored in Table type variable I am showing a message of ('Duplicate Record') following by raise_form_trigger failure
This code is working fine for checking duplicate value of that multi record field
The problem is that,if user enter the value in that field,and then goes to next field,enter value to that field and then press 'Enter Query 'icon,the bolth Validate trigger fires.As result first when-validate record fires,which stores that value,and then when-validate-item fires,as a result it shows duplicate record message
Please give me a meaningful logic or code for solving this problem
Any other logic to solve this problem is also welcome

@Ammad Ahmed
first of all thanks .your logic worked,but still i have some little bit of problem,
now the requirement is a master detail form where both master and detail is multirecord ,where detail cannot have duplicate record,
such as..........
MASTER:--
A code
A1
A2
DETAIL:--
D code
d1
d2 <-valid as for master A1 , detail d1 ,d2 are not duplicate
d2 <--invalid as as for master A1 , detail d2 ,d2 are duplicate
validation rule: A Code –D Code combination is unique. The system will stop users from entering duplicate D Code for a A Code. Appropriate error message will be displayed.*
actually i am facing a typical problem,the same logic i have been applied in detail section ,its working fine when i am inserting new records.problem starts when i query,after query in ' a ' field say 2 records (i.e. which has been earlier saved) has been pasted,now if i insert a new record with the value exactly same with the already present value in the screen(i.e. value populated after query) its not showing duplicate.................could u tell me the reason?and help me out...............its urgent plzzzzzzzzz
Edited by: sushovan on Nov 22, 2010 4:34 AM
Edited by: sushovan on Nov 22, 2010 4:36 AM
Edited by: sushovan on Nov 22, 2010 8:58 AM

What are the Mandatory Fields in Transaction ME51

Hello Seniors,
I have a requirement about purchase order creation. In this process, I am using the BAPI named " BAPI_PO_CREATE1 ". I have passed all the fields but when I debug and look into the internal tables, I couldn't find certain records. I even debugged " bapiret2" and I see an error which reads "" All mandatory fields are missing"". I have even created a PO in ME51 and found out the mandatory fields but in vain. BAPIRET2 still says, there are some more mandatory fields missing. I need to know what are all the mandatory fields to create a Purchase order using TCODE - ME51.
Your reply is most awaited and rewarded.
Thanks and Regards,
MARKIV

hi ,
Functionality
Function module BAPI_PO_CREATE1 enables you to create purchase orders. The BAPI uses the technology behind the Enjoy purchase order transaction ( ME21N).
Alternatively, the IDoc type PORDCR1 is available. The data from this IDoc automatically populates the interface parameters of the function module BAPI_PO_CREATE1.
Functionality in Detail
Authorization
The following authorization objects are checked when an Enjoy purchase order is created (activity 01):
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
Controlling adoption of field values via X bar
For most tables, you can determine via your own parameters in the associated X bar in each case (e.g. PoItemX) whether fields are to be set initial, values inserted via the interface, or default values adopted (e.g. from Customizing or master records) (for example, it is not mandatory to adopt the material group from an underlying purchase requisition - you can change it with the BAPI).
Transfer
Header data
The header data of the Enjoy purchase order is transferred in the table PoHeader.
Item data
The item data of the Enjoy purchase order is stored in the table PoItem (general item data). The delivery schedule lines are stored in the table PoSchedule.
Use the table PoAccount to specify the account assignment information. If account assignments have been specified for services and limits, you show the relevant account assignment line in PoAccount in the table PoSrvAccessValues via the package number of the service or the limit.
Services and limits
Services, free limits and limits with contract reference can be specified in the tables PoServices, PoLimits, and PoContractLimits.
Conditions
Conditions are transferred in the table PoCond; header conditions in the table PoCondHeader. Price determination is reinitiated via the parameter CALCTYPE in the table PoItem.
Vendor and delivery address
The vendor's address can be specified individually in the table PoAddrVendor; the delivery address in the table PoAddrDelivery. If you do not make any individual specification, the fields will be populated via the central address managementfacility.
Note
In this method, the following restrictions apply with regard to addresses:
Addresses can only be created with this method - they cannot be changed. You can only change address data with the method BAPI_ADDRESSORG_CHANGE.
When you create addresses, they are not checked by the method. An Enjoy purchase order may therefore contain faulty address data.
Partner roles
The partners can be maintained individually via the table PoPartner (with the exception of the partner role "vendor").
Import/export data
Import/Export data can be specified per item in the table PoExpImpItem. Foreign trade data can only be transferred as default data for new items.
Texts
Header and item texts can be transferred in the tables PoTextHeader and PoTextItem. Texts for services are imported in the table PoServicesText.
Version Management
You can make use of the Version Management facility via the table AllVersions.
Return
The PO number is returned in the parameter ExpPurchaseOrder. In addition, all information except the service and export/import tables is placed in the output structures.
Return messages
Messages are returned in the parameter Return. This also contains information as to whether interface data has been wrongly or probably wrongly (heuristical interface check) populated. If a PO has been successfully created, the PO number is also placed in the return table with the appropriate message.
Example
Example of population of BAPI interface in the Function Builder
Parameter: POHEADER
COMP_CODE = 1000
DOC_TYPE = NB
ITEM_INTVL = 00001
VENDOR = 0000001000
PMNTTRMS = 0001
PURCH_ORG = 1000
PUR_GROUP = 001
CURRENCY = EUR
Parameter: POHEADERX
COMP_CODE = X
DOC_TYPE = X
ITEM_INTVL = X
VENDOR = X
PMNTTRMS = X
PURCH_ORG = X
PUR_GROUP = X
Parameter: POITEM
PO_ITEM = 00001
MATERIAL = 100-100
PLANT = 1000
STGE_LOC = 0001
QUANTITY = 15.000
TAX_CODE = V0
ITEM_CAT = 0
ACCTASSCAT = K
Parameter: POITEMX
PO_ITEM = 00001
MATERIAL = X
PLANT = X
STGE_LOC = X
QUANTITY = X
TAX_CODE = X
ITEM_CAT = X
ACCTASSCAT = X
Parameter: POSCHEDULE
PO_ITEM = 00001
SCHED_LINE = 0001
DELIVERY_DATE = 02.12.2002
QUANTITY = 6.000
PO_ITEM = 00001
SCHED_LINE = 0002
DELIVERY_DATE = 03.12.2002
QUANTITY = 5.000
PO_ITEM = 00001
SCHED_LINE = 0003
DELIVERY_DATE = 04.12.2002
QUANTITY = 4.000
Parameter: POSCHEDULEX
PO_ITEM = 00001
SCHED_LINE = 0001
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0002
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0003
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
Parameter: POACCOUNT
PO_ITEM = 00001
SERIAL_NO = 01
QUANTITY = 15.000
GL_ACCOUNT = 0000400000
COSTCENTER = 0000001000
CO_AREA = 1000
Parameter: POACCOUNTX
PO_ITEM = 00001
SERIAL_NO = 01
QUANTITY = X
GL_ACCOUNT = X
COSTCENTER = X
CO_AREA = X
Parameter: POCOND
ITM_NUMBER = 000001
COND_ST_NO = 001
COND_TYPE = PB00
COND_VALUE = 79.900000000
CURRENCY = EUR
CURRENCY_ISO = EUR
COND_UNIT = KG
COND_P_UNT = 1
CHANGE_ID = U
Parameter: POCONDX
ITM_NUMBER = 000001
COND_ST_NO = 000
ITM_NUMBERX = X
COND_TYPE = X
COND_VALUE = X
CURRENCY = X
CHANGE_ID = X
Parameter: POPARTNER
PARTNERDESC = OA
LANGU = EN
BUSPARTNO = 0000001100
PARTNERDESC = GS
LANGU = EN
BUSPARTNO = 0000001200
PARTNERDESC = PI
LANGU = EN
BUSPARTNO = 0000001000
Help in the Case of Problems
1. Note 197958 lists answers to frequently asked questions (FAQs). (Note 499626 contains answers to FAQs relating to External Services Management.)
2. If you have detected an error in the function of a BAPI, kindly create a reproducible example in the test data directory in the Function Builder (transaction code SE37). Note 375886 tells you how to do this.
3. If the problem persists, please create a Customer Problem Message for the componente MM-PUR-PO-BAPI, and document the reproducible example where necessary.
Customer Enhancements
The following user exits (function modules) are available for the BAPI BAPI_PO_CREATE1:
EXIT_SAPL2012_001 (at start of BAPI)
EXIT_SAPL2012_003 (at end of BAPI)
The following user exits (function modules) are available for the BAPI BAPI BAPI_PO_CHANGE:
EXIT_SAPL2012_002 (at start of BAPI)
EXIT_SAPL2012_004 (at end of BAPI)
These exits belong to the enhancement SAPL2012 (see also transaction codes SMOD and CMOD).
There is also the option of populating customer-specific fields for header, item, or account assignment data via the parameter EXTENSIONIN.
Further information
1. Note 197958 contains up-to-date information on the purchase order BAPIs.
2. If you test the BAPIs BAPI_PO_CREATE1 or BAPI_PO_CHANGE in the Function Builder (transaction code SE37), no database updates will be carried out. If you need this function, please take a look at Note 420646.
3. The BAPI BAPI_PO_GETDETAIL serves to read the details of a purchase order. The BAPI cannot read all details (e.g. conditions). However, you can use the BAPI BAPI_PO_CHANGE for this purpose if only the document number is populated and the initiator has change authorizations for purchase orders.
4. Frequently used BAPIs for purchase orders are BAPI_PO_CREATE, BAPI_PO_CREATE1, BAPI_PO_CHANGE, BAPI_PO_GETDETAIL, BAPI_PO_GETITEMS, BAPI_PO_GETITEMSREL, and BAPI_PO_GETRELINFO.
5. For more information on purchase orders, refer to the SAP library (under MM Purchasing -> Purchase Orders) or the Help for the Enjoy Purchase Order, or choose the path Tools -> ABAP Workbench -> Overview -> BAPI Explorer from the SAP menu.
regards
reena

Mandatory Field in ALV Grid

Hello,
i've a editbale alv grid.
Is it possible to set a field/colum as mandatory field?
Best regards,
TomSd

Hi,
Have a look at the report BCALV_EDIT_03.
In this report the program logic is such that if the user enters an incorrect value an error is displayed.
Instead you can check if the field of your ALV filelds are null and validate them accordingly.
Regards,
Sandeep

Mandatory field validation on Page links.

We have created a Portal application where we included different applications as taskflows. We have also created a tabbed interface which helps us to communicate from one task flow to another taskflow. When we are in one page of taskflow and try to move to another page of different taskflow using tabbed interface we receive mandatory field validation error which prevents us to move to any other page until we fill all the mandatory fields. We need to move to different page of taskflow by using the tabbed interface even without filling all the necessary mandatory fields. Can anyone help us to resolve this issue as this is very important for our project.

Layout
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="Check Pernr " >
 <htmlb:form>
 <htmlb:textView text = "Personnel No."
 design = "EMPHASIZED" />
 <htmlb:inputField id = "pernr"
 value = "<%= lv_pernr %>" />
<%
if lv_no_pernr = 'X'.
%>
<script language="Javascript">
alert ("Personnel no. is not Valid")
</script>
<%endif.%>
 </htmlb:form>
</htmlb:page>
</htmlb:content>
ONINPUTPROCESSING
DATA: l_pernr TYPE persno.
DATA: data TYPE REF TO cl_htmlb_inputfield.
data ?= cl_htmlb_manager=>get_data( request = runtime->server->request
 name = 'inputField'
 id = 'pernr' ).
IF data IS NOT INITIAL.
 l_pernr = data->value.
ENDIF.
CLEAR lv_no_pernr.
SELECT SINGLE pernr FROM pa0000 INTO l_pernr WHERE pernr EQ lv_pernr.
IF sy-subrc NE 0.
lv_no_pernr = 'X'.
ENDIF.
PAGE ATTRIBUTES
lv_no_pernr TYPE FLAG
lv_pernr TYPE PERSNO
hope this helps.
A

How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice

Hi,
Kindly solve, How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice.
Regards,
Rajeev.

Follow this step..
1. In SQL Server, go to the SAP B1 Database you're using.
2. then on the Object Explorer , go to Database Folder, explode the SAP DB->Programmability->Stored Procedures->SBO_SP_TransactionNotification * the only Stored Procedure that is allowed to be edited. Just right click and modify
3. Try to paste this -> and click F5
If
@object_type ='13' and @transaction_type in ('A','U')
Begin
If EXISTS
select DocEntry from ONIV
Where DocEntry = @list_of_cols_val_tab_del
and SlpCode<>'-1'
Begin
set @error_message = 'Please select the Sales Employee'
set @error = 1
END
END
Regards
Kennedy

Check for mandatory fields while creating EP users using code .. :|

Hello All,
I have a code using which I can create user accounts/EP users on Portal, am working on EP6 SP9 & SP12.
My query:
1. From Portal's perspective -> While creating EP users, there are few mandatory fields like user-id, FirstName, LastName, Email-id and Password. If any of the above fields is null/empty, Portal would give us an error message.
2. From coding perspective -> Here, only the user-id is required. Even if I do not enter/fill any of the above mentioned mandatory fields (except user-id), user account is created.
In case wherein FirstName/LastName is not mentioned, Portal shows the userid in the Welcome Frame, i.e. Welcome <user-id>. Tried this by commenting the statements contains the methods related to setting/accepting FirstNme and LastName of user.
I want to know if this is all rite?
If no, then please guide me as to how can I set mandatory fields in my code.
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan

Hi Ritu,
>>please guide me as to how can I set mandatory fields in my code??
In ur jsp file or in the controls code add the following attribute
<hbj:label id="userIdLabel"
 text="User ID"
 labelFor="userIdInput"
 design="HEADER3"
 required="true"/>
and to check the mandatory entry for that field do this in the submit button
<hbj:button id="insert"
 text="Submit"
 design="emphasized"
 onClick="save"
 onClientClick="if(!isMandatory()) htmlbevent.cancelSubmit=true;;"/>
and in the javascript write the client validation code.
Hope this helps.
Regards,
Joshua Kiran

Mandatory fields error as soon as CreateInsert is invoked

Similar Messages

Maybe you are looking for