Mandatory segments and fields of Idoc...

Hi Experts,
I am very keen to know the mandatory segments and fields of the ORDERS05 IDOC so can you please let me how to check the mandatory feilds and segnents of this particular Idoc.
Thanks in advance.Your help is highly appreciated.
Thanks,
Kiran.

Hi,
U can check in WE60 transaction code where u have to specify the basictype ORDERS05 AND THEN CLICK ON HTML FORMAT BUTTON..Now u can see the documentation of the idoc...
Regards,
Nagaraj

Similar Messages

  • CREMAS03 Segment and field for LANGUAGE ?

    Hi,
    Please advise what is the segment and field name for Language in IDOC CREMAS03 (Creation Vendor Master).
    Thank You and Best Regards
    Fernand

    Hello Fernand,
    look for data element SPRAS, you will find in several segments (e.g. E1LFA1M-SPRAS, E1LFA1H-TDSPRAS).
    Best Regards, Dirk

  • Source IDoc segment and field is showinh red.

    Hi Guys,
    I have created a mapping between source idoc HRMD_A07 and Target structure MT_Employee. in HRMD_A07 i have mapped segment EP1LOG1 to MT_Employee (direct mapping) to reoccur multiple times. Now when i test the mapping and load test xml instance then source idoc structure itself is showing red for all fieds and when executed target structure does'nt get created. what does this mean.
    Please suggest.
    Regards
    Swapnil.

    Hi,
    So it means that the source payload and the source Idoc structure is not matching.
    Please import the Idoc once more.. and activate and clear the cache once.
    Now test it.
    If still prblm.. pl do post
    Babu
    Edited by: hlbabu123 on Mar 9, 2010 5:37 PM

  • IDOC - Delete unwanted segments and reprocess the IDOC by WE19

    HI all,
    I have an issue and wanted your help at this point of time.
    Case - Assume that an Idoc has been rejected by system due to few bad segments. Later i dentfied that in the Idoc few segments were bad and rest are good.
    If i use transaction WE19 for copying the Idoc and during selection of the segment if i delete the bad segments and copy the rest which are good. Will the Idoc be processed sucessfully with a new Idoc number so that the Bad segments i will fix it up manually in ERP. Kindly suggest. If possible let me know if any implication behind that or anything you like to add in the process to help me out.
    Kindly advice me.
    Regards,
    Pratap
    Edited by: pratap kumar on Dec 20, 2007 5:02 AM

    Hi Pratap,
    Which Idoc did you process. For each message type certain segments are Mandatory.
    for example in WPUBON01 -->following segments are mandatory
    Control Record --- Message type / Partner Type / Port / Server ID etc.....
    E1WPB01        --- Date / Time / Partner Number etc...
    E1WPB02        --- Article type / Article Number / Quantity etc...
    E1WPB03        --- Condition Type / Amount etc...
    E1WPB06        --- Payment method / Total Amount / card number etc...
    In control record we will have the  port / System ID etc.
    If other segments are not there leave it....it will process successfully.....
    To find out error segment refer  Table  EDID4 and correct the segment and post it.
    Regards,
    ManiKumaar

  • Regarding mandatory IDOC segments and fields!

    Hello all,
    I am working with an IDOC interface (material price change). IDOC type is MATERIALVALUATION_PRICECHANG01.
    When we go to WE60 for this IDOC type, SAP has marked all segments as optional for some reason. But I am trying to figure out which fields are mandatory as per the configuration. From my previous post I came to know that it depends on material types, how they are configured as an example.
    I am determining valuation area from a lookup table, but how can I determine valuation type? I am talking abt segment E1MATERIALVALUATION_PRICECH.
    However, the segment E1BP_MATVAL_PRICEDATE is marked as optional in SAP. Can I know whether those segment fields are required or optional based on the configuration setting in our R/3 system.
    Thanks,

    Hi,
    U can check in WE60 transaction code where u have to specify the basictype ORDERS05 AND THEN CLICK ON HTML FORMAT BUTTON..Now u can see the documentation of the idoc...
    Regards,
    Nagaraj

  • How can i pass the  segments and fields to the ORDERS05 IDOC

    Hi All,
    I want to use ORDERS05 Idoc type for creating sales order. How can I pass the order type, sales org., distr. channel, division, sold-to-party, material and quantity to the Idoc?
    please help me out in this.
    thanks in advance
    jasmine

    Hi,
    Goto WE19 TC and there select your IDOC and there u can pass the data.
    Regards,
    Phani

  • ?segment n field for VBKD-INCO1 from ORDERS05

    Hi,
    I was trying to find the corresponding segment and field for VBKD-INCO1 [Incoterms (part 1)] from ORDERS05 idoc.
    Please help me in this regard.
    Message was edited by:
            Ramesh Kumar

    Hello,
    Check segment
    E1EDK17 ->qualf ->001 for incoterms part 1(header lever)
    E1EDP17-> Qualf->001(item level)
    Thanks,

  • Mandatory Segments / Fields for Incoming Vendor Invoice for PO

    Hello,
               I have a Requirement to develop an Inbound Interface for Incoming Vendor Invoice with Reference to a PO. If I have to build an IDoc using WE19 tool, what are the Minimum Mandatory Segments / Fields that I need to populate in order to Post the Invoice successfully for the PO? Please let me know along with the Qualifiers.
    Thank You,
    Venkata Phani Prasad K

    Managed to Find the Necessary Segments along with the Qualifiers required to Post the Incoming Invoice. Closing the Thread.

  • Issue:EDI: Syntax error in IDoc (mandatory segment missing):Idoc extention

    Hi all,
    I have extended the the standard IDOC MATMAS05  classification view with structure as below-
    E1MARAM                        Master material general data (MARA)--->Mandatory segment
         Z1KLART                        KLART --->Extended chaild to E1MARAM
             Z1CLASS                        segment for class --->Extended chaild to Z1KLART
             Z1CHARACTERISTIC               CHARACTERISTIC --->Extended chaild to Z1KLART
         E1MARA1                        Additional Fields for E1MARAM
         E1MAKTM                        Master material short texts (MAKT) --->Mandatory segment(Child   to                                                                               
    E1MARAM )
    I am getting an error in IDOC fro material master as:EDI: Syntax error in IDoc (mandatory segment missing ).
    Diagnosys By system is :*The segment E1MAKTM has the attribute 'Mandatory' in the syntax description of the basic type MATMAS05 (customer enhancement ZMATMAS05). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
    This error may have been triggered by an unidentifiable segment before the expected mandatory segment.*
    Please help to resolve the issue.
    Thank you.
    Edited by: sanu debu on Apr 30, 2009 11:25 AM
    Edited by: sanu debu on Apr 30, 2009 11:31 AM

    Hi,
       You cannot add an segment in the middle of other segments.
    YOu have to add any segment at the last.
    If you want to add a segment as the child of another segment, it should be added after the last child of the parent segment.
    In you case, you have to add your segment after the E1CUCFG segment.(NOt under that segement)
    Regards,
    Ravi Kanth Talagana

  • EDI: Syntax error in IDoc (mandatory segment missing)

    HI all,
    Error Message - EDI: Syntax error in IDoc (mandatory segment missing)
    Status ID - E0
    Message No - 072
    Status of the IDoc - 26
    Please help me how to solve this issue?
    Thanks,
    Srini

    Hi,
    This error normally comes up when the sequence of segments has been disturbed.
    For successfully posting an IDOC you need to maintain the sequence of the segments as in WE30.
    You can also check which segments are mandatory in WE30 by clicking on the segment name and the pop up that comes.
    Thanks,
    Manish

  • Idoc extension with non-mandatory segments

    Hi,
    I have a generic question on extension of IDOCs. If we are creating a child segment of a standard segment in extension, can we create a child as mandatory segment of a non-mandatory parent segment, here parent is some standard/custom segment and child is a custom segment. I have confusion on this as the system allowed on this as how a child segment can arrive in Idoc if parent segment is missing.
    Regards,
    Harsh.

    Referred to WE60 for documentation. Cannot have blank segments while using the test tool WE19. Works fine in real time environment.

  • Mandatory Fields for IDOC ORDERS01 for Pricing Condition EDI1 to trigger

    Hi ,
    I'm Testing an Inbound ORDRSP using we 19  for Pricing Conditions EDI1. What are the Mandatory Fields for IDOC ORDERS01
    Thanks

    hello,
    I think it's better to execute VA01 to create a sales order; in that way you should have an idea of mandatory fields.
    Thanks.

  • Idoc- File scenario: Read a data field in IDOC and name the file with it

    Hi All,
    I am configuring an IDOC to File scenario.
    I have a requirement where I need to read one of the IDOC data field and use that as the name of the File.
    E.g: If the IDOC data field-1 = '123456', then I need to name the output file as '123456'.
    Is it possible to do this. Appreciate your help on same.
    Thanks
    Shirin

    Try this code..
    desired field from IDoc will be input parameter to UDF
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    conf.put(key,a);  // a is input parameter
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName; 
    Also, check Adapter specific message attributes in file adapter, check  filename

  • How  can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

    Hi All,
                Can any one help, how  to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
    Given BADI name was----VENDOR_ADD_DATA_BI .
    Thanks

    Anil,
    look at this thread ..may be this helps you.
    Re: 824 IDOC and BADI/User Exit
    sateesh.

  • Concat 4 source fields in new line to a single field in IDoc segment-field?

    HI,
    My requirement is below: Need to concar 4 sources fields in a file and map them to a single target field (In IDoc) with each source field in new line.
    Lets say if I have a source file with
    f1, f2, f3, f4
    I need to send to single target field as follow:
    f1
    f2
    f3
    f4
    It is basically concat in newline. Can I use any delimiter string in std concat funtion or help me to provide sample code for UDF.
    Regards,
    N@vIn

    Sample UDF for your case.
    public String concatStrings(String var1, String var2, String var3, String var4, Container container) throws StreamTransformationException{
              String newLine = System.getProperty("line.separator");
              //String newLine="\r\n";
              String concatString =var1 + newLine + var2 + newLine + var3 + newLine +var4;
              return concatString;
    Note: Use System.getProperty that would take care for all Operating systems when deploy this code.
    you might not able to test in test mapping tool
    If you run in eclipse or nwds you will see output as follows
    var1 value
    var2 value
    var3 value
    var3 value
    Hope this helps. Let me know further.

Maybe you are looking for