Mandatory the Material Quantity and Storage Location Field in Order
Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards
Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh
Similar Messages
-
FM to check material plant and storage location combination
I need to build a check that material is extended for plant & storage location.Please guide id some standard function module exists.
I do not want to write select query using MARD.Hi ,
try this FM
MARD_SINGLE_READ
Regards,
Rohan. -
Combination of Material,Serial Number, Plant and Storage location
Serial Number needs to be fetched corresponding to material, plant and storage location. which tables to hit.
KartavyaHi,
Please check table EQSE (OBJK -> EQSE).
Regards,
Ferry Lianto -
During MRP run unwanted plant and storage location include and exclude
Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. 1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not. You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK -
Can we block a material for particular storage location ?
We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
Please share ur view.Hi,
If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
Pls reward if found useful.
Regards,
Indranil
Message was edited by:
INDRANIL BHATTACHARYYA -
Making Storage Location field mandatory in Work Order
Hi
As per our proces, if PR is created from work order and if there is no storage location in work order then PO will have warehouse address as a shipping address. So it is expected that PR must have storage location details when it is created from work order to avoid incorrect shipping address in PO.
So, I want to make storage location field mandatory in components tab of work order.
Also I want to avoid the users to deliberately removing the storage location and making it blank.
Regards
PrakashHi,
You will have to use one of the below mentioned user exits to accomplsih this requirement.
CNEX0026 Maintenance order: General check for material
CNEX0027 Maintenance order: Determination of plant or storage location for component
Thanks
Narasimhan -
Unable to set plant and storage location in Batch as required/mandatory
Hi Experts,
I am having a problem regarding field controls.
I would like to make plant and storage location as mandatory/required in MSC1N,MSC2N,MSC3N and MSC4N.
I have follow the path below
SPRO-logistics-general-batch management-bath master-field selection batch master-assign field to field groups
What i can see is field groups are being assigned to field name.
My question is, where do we go to to set the field group?
Thanks in advance!Hi Dex,
You have gone to the right location.
On 'change view field control for batch master record' against each transaction like MSC1, MSC2,MSC3 and MSC4 there are number of dots '............'.
Double click on each dot against the transaction you want to modify. Each dot corresponds to different fields. Over here you can specify wheter you want to make the field required, optional etc.
Hope this helps.
Tarang -
Making storage location field mandatory at contract level
Dear All,
I want to make the field storage location mandatory at contract level.Is there any configuration setting to make storage location mandatory at the time of contarct creation.
please suggest.
thanks in advance
ravi ksapuser k
1. IMG --> SD --> BF --> Log of Incomplete Terms --> Define Incompleteness procedure (Double Click)
Choose "A - Sales Header", Click New Entries, Create say 55 - Contracts
Click "New Entries", Enter Table = VEDA, Choose Field (Storage Location Field ) and Status.
Click Save
2. IMG --> SD --> BF --> Log of Incomplete Terms --> Assign Incompleteness Procedure
Assign Procedure to sales document Types
WK1 = 55
Then Click save
Regards
Sathya -
Storage location field mandatory in PR
Hi ,
We want to make "Storage location" field mandatory in PR for "_Document Type and Account Assignment" Combination._
Like we have a PR document Type ZDM for raise a PR for materials, we want to make STORAGE LOCATION field mandatory if ACCOUNT Assignment in line item is BLANK.
In case Account assignment is K then this field should be NON-MANDATORY and preferrably should be greyed out.
Is there is any standard SAP settings for that
Regards
ShreyHi,
Use the user exit -> MEREQ001
Hope the above helps.
Regards,
Vivek -
Material deletion at plant and storage location deletion at plant
hI EXPERT,
We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
ThanksHi,
If you want to delete material at storage location level
Enter MM17
Select table MARD
Select fields tab
find MARD-LVORM
Execute (F8)
Enter list of materials
Enter plant
enter storage location.
tick the field lvorm(carry out mass change) -
Tables to relate material, sales organisation and storage location
Hi,
I have to develope a program to download a file for stock.
On my selection screen I have
Material
Sales Organisation
Storage location
and the file structure is
MATERIAL | STORAGE LOCATION | QUANTITY | TODAY DATE |
Can anybody please tell me what Table I shouid use bacause when I am trying to use VBAK and VBAP the order no is the key and here I am not doing anything with order no.
Regards.
Kusum.Hi,
You can use table
MABW - Management of Differently Maintained Material Data in Retail
or a combination of
MARD and MVKE - where MARD gives Storage Location and MVKE gives the Sales Organization of the material number
Regards,
Sumalatha N. -
Material transfers between plants and storage locations report
Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards -
Creating material in multiple plants and storage locations
Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek -
Make the Storage Location field in Grey mode in Delivery (picking Tab)
Hi Experts,
Pls suggest me to how make the storage location in Picking Tab of Delivery to Grey mode .
Regds
RajivIn tcode U have to enter Transaction code VL01N
Transaction variants field just Press F4 to get already buid transaction variant else u have to create the ur screen variant by clicking the button named Create in Below menu option .
If the variant already exist -> enter
u will get the data in the lower half of the screen , select the transaction Variant with field for storage location , generally datais distributed in delivry doc at header and item level so for storage location u have to take the one with item level data .
There u will find the all the fields which are there in Delivery doc at item level with check boxes in front of them please goto storage location field and check the check box saying output field ( This means this field will be display only) Save and try and create the delivery again.
This will be display only in VL01N -
How to find out the plants and storage location for a given company code
hi
How to find out the plants and storage location for a given company codeHi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore
Maybe you are looking for
-
DNS question and no name available via DNS and no reverse DNS errors
We are running an OS X server, 10.4.11, OD Master. We are getting some error messages, and we have setup DNS to forward requests for example.com. (our website) to our web developer's external web server where our website is being hosted. Oct 15 10:29
-
Hi, What is follow up action work list and where do we define it? Regards Deepak
-
Return process with credit note.
Hi Experts, I have done a sales order with quantity 9 pcs, delivered and PGI with quantity 9 pcs and also invoiced the customer for 9 Pcs. Now customer has returned 4 pcs, in this case he has to only pay for 5 pcs. I have done return process 1. Crea
-
Bookmarks don't sync from PC to myAndroid phone or tablet.
version 32.0.2 FF on PC, tablet & phone are all up to date. New sync is being used on all 3 devices. FF says sync is working, but: the only bookmarks that sync are from my android phone to android tablet. Nearly all of my bookmarks (thousands) are on
-
Got problem in tomcat while read xml file..
hi' i just wondering, why i always got his exception, i just want to read this file java.io.FileNotFoundException: C:\Program Files\netbeans-5.5\enterprise3\apache-tomcat-5.5.17\bin\dbconfig.xml (The system cannot find the file specified) at jav