Manga-like screens in Illustrator 8. How to create?

Howdy everybody,
OK here is a question to test your collective knowledge...
I received an internal request at work to create a brochure that had the look of a "Manga" comic book.
So in doing my research I see alot of Japanese illustrators used to use those sticky "bendai screens" also made by Letra type once-upon-a-time.
So, my question is this...
1.1 Illustrator MUST have a feature in it to create such screened backgrounds. right? Where is it, and how would I use it?
1.2 Or do I need to acquire a specific plug-in or filter?
1.3 Would anyone know of any links on the web I can follow up on?
Thanks to all who respond, much appreciated.

Well, there is Effect->pixelate->halftone screen. It's one of the slower effects, but it would remain live and editable. Or you could use the dot patterns included as swatches, Window->Swatch Libraries->Other Library... Then navigate over to your Illy folder and (in cs2 at least) they can be found in Presets->Patterns->Basic Graphics->Basic Graphics_Dots.ai
Once you have those dot patterns loaded, drag on of them from the swatch palette onto your artboard and take a look at how the pattern swatch is made. You can likely find what you need in a pattern swatch.

Similar Messages

How to create the Header Menu

Hi Experts,
how to create or change the Menu (like in the screenshot) .. how to create something like eWorkflow and the level below?
Screenshot:
http://img527.imageshack.us/my.php?image=exba7.jpg
Thanks in advance
CC

HI,
Refer this link for create and changing the roles:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/89e641813cc517e10000000a155106/frameset.htm
Display the roles based on the requirment:
Change the "Sort Priority" of the role to ' 0 '. you can view that role first in the list (Default value is 100). if u give minimun value then that will be displayed as ist role for the user.
regards,
Kathiresan R

How to create and allocate authorization profiles?

How to create and allocate authorization profiles? please issue step by step and usage of TC:PFCG.

Hi Srinivas,
I would like to try to explain how to create an authorization profile.
1. you have to create a user with the Tcode SU01 at first
2. run Tcode /nPFCG.
3. enter a name for the role (naming convention is here very important) which you want to create and then click on "create Role".
4. enter a short description for the role and then click on Authorization tab.
5. now you are required to save the role. Click on it and continue.
6. click on the tab "change authorization data" and select the authorization template what you need.
7.change the authorization field value.
8.click on button "Generate".
9.click on button Back
10. click on Tab user to assign the role to the user which you created in step one
11.click on button User comparison and then complete comparison
Hope this helps

How to create namespace in BPA?

I generate BPEL process from BPA blueprint, but it have default namespace like "http://xmlns.oracle.com/",how to create specified namespace in BPA?

Here is a small example if you want to use FOR loop in your rtf template:
****************START*****************
<?START:BODY?>
COLUMN1 COLUMN2 COLUMN3
<?FOR-EACH:GROUP_NAME?>
VALUE1 VALUE2 VALUE3
<END FOR-EACH?>
<?END:BODY?>
*****************END*******************
NOTE: Consider COLUMN1 as column name like NAME, ID etc. of your table and VALUE1 (before generating preview) as the blank row of table (after generating preview) you'll get values of the respective columns extracting out of that FOR loop.
After loading your XML data into respective fields you'll get all the rows returned from that FOR loop.
Thanks,
SS

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

I would like to change "Windows" to "Windows HD" on boot screen (option key). How can I do that?

I would like to change "Windows" to "Windows HD" on boot screen (option key). How can I do that?
I would like to have the following names on boot screen:
OS X Lion HD
Windows HD
Recovery HD
Thanks in Advance

Hello Fortuny,
thanks for helping, although your suggestion does not work.
Renaming c: partition (bootcamp c:) to (Windows HD), does not change the name "WIndows" on boot option.
Your suggestion only applies if changing OS X Lion name on boot option using finder, which I already did in first place. My problem applies only in changing the word "Windows"on boot screen (option key).
Regards

How do I create & edit a pattern like this in Illustrator?

I want to know how to create and edit a pattern like this in Illustrator:
And then be able to do this:
(same pattern with blue square effect)
Any advice would be appreciated.

Read up on creating patterns. This one is just simple lines and very easy to do, but remember that the defining rectangle MUST be at the very back of the stack:
Start off by making your pattern tile (top). Drag the drawing to the Swatches panel.
Fill a rectangle with the pattern. Scale and rotate the pattern fill (see Scale and Rotate dialogues).
Recolour the pattern using Edit > Edit Colors > Recolor Artwork

I bought the pack for students adobe creative cloud, already made the payment three days ago but when opening programs like photosop and illustrator puts the trial period has expired, how I can make them work?

I bought the pack for students adobe creative cloud, already made the payment three days ago but when opening programs like photosop and illustrator puts the trial period has expired, how I can make them work?

Hello Ibonedm,
Sol 1. Please try sign out from Creative cloud Desktop App and quit it.
1. Launch Creative Cloud application manager.
2. Click the gear icon in the upper-right corner and select Preferences.
3. In the Preferences menu, under General, click the Account tab.
4. Click Sign Out from Creative Cloud.
Then re-sign in and launch Photoshop CC 2014 and check.
Sol 2. Check your Hosts file.
Windows
1. Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
2. Locate Hosts file and move it to Desktop
3. Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
4. Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
5. Search the hosts file for entries that reference activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
6. Save and close the file and move it back to Etc folder.
Mac OS
1. Log in as an administrator to edit the hosts file in Mac OS.
2. In a Finder window, choose Go > Go To Folder.
3. Type /etc.
4. Select the hosts file and move it on Desktop open it.
5. Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
6. Search the hosts file for entries that reference activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
7. Move Hosts file back to etc folder
8. Save and close the file.
Then try launching Photoshop CC 2014 or Illustrator CC 2014
If prompt for License this software, please click on it and sign in with the Adobe ID and Password which you have used to purchase the subscription and check if you can activate and use the products.
Please respond , if any issue.
All the best
Loveneesh.

After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster?

After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.

I don't think your mac is setting up. It's stuck.
I would:
hold the power button until it shuts down
unplug all peripherals
do a safe boot (restart and hold down the shift key until you see the apple logo).
If it starts up in a safe boot, then you can try restarting with a normal boot.
If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
MacKeeper
CleanMyMac
third-party antivirus software
any other "cleaning" or "optimizing" or similar third party "utilities".
A good place to start would be to uninstall any of those (while in safe mode) and then restart.

How do I create a pattern like this in Illustrator?

Hello,
I know how to create a dotted pattern using swatches or brushes but this pattern is benden afterwards. I really need to have the same bended effect.
In the middel the dots are aligned perfectly vertically next to one another, at the bottom not anymore...

Make scatter brush out of a row of circles
Apply to a curved path
expand appearance
apply color

How to create gift card template in Illustrator?

I'm trying to create a gift card in Illustrator. When I initally create new document under "File", I set the width to 3.5" and height 2.25" and the top, bottom, left and right bleed to .125". There wasn't an option to preset the radius of corners for the gift card. The gift card appears square in the document like a business card. How do I create the rounded corners of gift card in Adobe Illustrator CS5 (PC)? Lastly how far do I inset the dash line where text (or QR code) will be positioned? I wish to be able to save gift card document as a template for future projects.

Double click on the layer in an area of that layer which is not occupied by info to the right of name.
this dialog appears check Template if it is not already selected and that automatically makesi non printing but you can not work on that layer.
You can also uncheck printing the layer will not print but you cans ill work on it.
Hrre is the rounded rectangle tool.
select the rounded rectangle tool and double click on the document (artbaord ) to bring up the dialog and enter te dimensions of the card and the radius corners.
Now you us ehe align panel or the align icons in the control panel to align the rounded rectangle to your artboard using he option to align to artboard.
Now the video shoul have filled your screen unless ou are using a low resolution for your monitor.
Bu more important you should read help files about creating documents using the various tools and the various panels and either take a course in using Illustrator or read some books on the subject.
The Real World Illustrator book by Mordy Goldin is a good one.
But it is going to very frustrating if you have noi working knowledge of the application.

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

Hey guys, my screen is dead. How do I get a new one?

I looked on eBay and found a bunch of displays, but there are so many, I don't know which one to get!
so I need a little help identifying my mac or the part number, if possible. I think it's a Macbook l,l.

Re: Hey guys, my screen is dead. How do I get a new one?
You buy one and install it or you pay an installer to do it.
I looked on eBay and found a bunch of displays, but there are so many, I don't know which one to get!
Are you confident (in that case) that you can do the repair yourself? Perhaps you should let a professional select a screen and install it for you.
Laptop parts all have a part number - you should start there. Here is a typical part number location: http://www.screentekinc.com/lcd-removal-instructions_en,macbook,diagram3.shtml
Try speaking to a repair shop like techrestore, for example, for further details - http://www.techrestore.com/xcart/home.php?cat=273
I need a little help identifying my mac or the part number, if possible. I think it's a Macbook l,l.
All 13" Mac Books have the same screen which measures 13" diagonally. If you need to examine other size/era Apple notebooks look here http://www.apple.com/support/hardware/
If you can plug an external display into it then click the top left Apple icon and select "About This Mac" for CPU identifiers etc.
EDIT
I almost forgot - there are great service manuals available from here:
http://www.powerbookmedic.com/xcart1/home.php?cat=258
Message was edited by: NA Smith

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

My iPhoto '08 (v 7.1.5) shows a blank screen (no photos). How do I rebuild it from my iPhoto library. Thanks!

My iPhoto '08 (v 7.1.5) shows a blank screen (no photos). How do I rebuild it from my iPhoto library. Thanks!

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Manga-like screens in Illustrator 8. How to create?

Similar Messages

Maybe you are looking for