Manhours not refelecting in CJI3 Line item report

What user is meaning that manhours entered by employee/end users (personnel) for their daily work in the project does not reflect in CJI3 report (Actual line items display).
I have posted manhours in CAT2 but these are not getting transferred in Project thr CAT5.
can we post manhours to wbs element without assigning activities or project team?

Hi.
To post man hours on a project an activity type has to be maintained. It looks like you have done that. Else you couldn't save.
Usually the process looks like this then: You release the hours first in CAT2. Then the hours have to be approved in CAT4. Unless this has not happened the hours cannot be transferred to the project in CAT5.
Hava a look into transaction CATA as well.
Cheers!

Similar Messages

Purchase Document not appearing on GL Line item report

Hi gurus: Please help me figure out why even though I have activated the purchase document field in the field status group I still cannot see it in the line item reports when I run FBL3n. Note the purchase document field is showing up as a field for selection but it comes thru blank.
Please help me
thanks
Brian

i wanted to get the same output, it doesnt work for some reason. I had to craete a query to achieve this

Changes in MM02 not reflecting in COPA lin item report

Hi,
In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
I am designing report for three companies by using material group 1,2,3,4 and 5.
We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
Please suggest on how should we rectify our material grouping to reflect in COPA report.
Regds

Hi,
in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

Error in Project System Line Item report (CJI3, CJI4, CJI5, etc)

Dear Expert,
I am facing error for all PS line item report, for example: CJI3 .. When I tried to execute CJI3, the following is the error message (ABAP dump):
Does anyone experience similar problem?
How to fix this?
I search the Internet, but suspect is SAP Plant Maintenance cause the problem.
Header 1
Short text
    Syntax error in program "SAPDBPSJ ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RKPEP003" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPDBPSJ " in include "DBP
     " in
    line 46:
    "Field "GT_PM_ORDER_NETZKONT" is unknown. It is neither in one of the s"
    "pecified tables nor defined by a "DATA" statement."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "RKPEP003" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The following syntax error was found in the program SAPDBPSJ :
    "Field "GT_PM_ORDER_NETZKONT" is unknown. It is neither in one of the
    "pecified tables nor defined by a "DATA" statement."
Trigger Location of Runtime Error
    Program                                 RKPEP003
    Include                                 RKPEP003
    Row                                     179
    Module type                             (FORM)
    Module Name                             %_INIT-GET
Trigger Location of Runtime Error
    Program                                 RKPEP003
    Include                                 RKPEP003
    Row                                     179
    Module type                             (FORM)
    Module Name                             %_INIT-GET

Hi
could you check note 1747890 - OAA activated: Dump w/ MESSAGE_TYPE_X and OK 036 in LDB PSJ in case that provides solution to your problem?
cheers
panagiotis
ps...it looks like an issue in the logical database

Current Header Rows Not Appearing on FBL1N - A/P Detailed Line Item Report

Our A/P staff somehow turned off the header rows at the top of the FBL1N report.    The rows contain the various variables related to the report such as vendor name, vendor address, city, state etc.
Does anyone know how I can change the report so that these variables once again appear on the report?
Thanks,

Michael,
Do you mean that you can not access via the following link?
http://service.sap.com/notes
Well, if this is your case, I will copy note 181592 here since there is only text information and not code correction. I am sorry but the format is not good, but I think this note will help you to insert header again.
If this note does not help you, let me know and I will check the other notes that I have provided.
Please kindly check the note text below:
Best Regards,
Vanessa Barth.
==============================================================
SAP Note No. 181592                          20.01.2009           Page 1
Number              181592
Version             6 from 03.03.2000
Status              Released for Customer
Set on              02.03.2000
Language            EN
Master language     DE
Short text          Line item: Setting-up the headers
Responsible         Christian Auth
Component           FI-GL-GL-D
                     Reporting/Analysis/Display
Long text
Symptom
You want to display information in the headers or change information
preset in the headers for the following: line item display for vendors,
G/L accounts customers or customer information on an account.
Additional key words
Program RFITEMAP, RFITEMGL, RFITEMAR, Transactions FBL1N, FBL3N, FBL5N,
layout variants, layout headers
Cause and prerequisites
You are not familiar with the option of individually setting header
information or how to use maintenance transactions.
Solution
1. Overview
     In the line item report you can display information in the header of
     the list (given that this information is equal for all items
     displayed).
     For example, a customer accounts clerk wants to display the
     following data in the header: account number and name of the
     customer, name and telephone number of the responsible accounting
     clerk for the customer, current date.
     You can use information taken from the account master data. General
     variables like the time and date are also available.
     The following describes how you can set up the layout of header
     information yourself. A header layout is always assigned to the
     particular display variant of the list which you set on the bottom
     of the selection screen or which you can choose using CTRL+F9 on the
     display ('Choose' button). You can therefore personalize the header
     layout as well as the remaining display layout.
     The header layout is output if the account number group is changed,
     if the list has been sorted according to the 'Account' field, and if
     a page break has been set for this field. You can maintain these
                                                                   Page 2
        settings under the menu option Edit -> Subtotal (Ctrl+F1).
     2. Setting up the headers
         Choose from the menu
         Settings -> Display Variant -> Current header rows
         You now see rows in which you can arrange variables. Using the
         pushbuttons in the function bar, you can create or delete rows.
         When you position the cursor at the start position and choose
         function "Gen. variables" (Shift+F5) or "Characteristics..."
         (Shift+F8) a new variable is positioned in the header area. From the
         following dialog box, you can choose the variable (also called
         characteristic) from an inventory.
         Under "Text type", you determine whether the label for the variable
         (for example, the label 'Customer') or if the value itself should be
         used (that is, the appropriate customer number for the items
         displayed in each case). You can display pairs as follows:
         <Label>: <Value>
         for example,
         Customer: 47110815
         If the value is a key for a short or long text (either a name or a
         description), you can also select this under "Text type".
         After selecting and positioning the characteristics, save and return
         to the list. The headers are displayed immediately with correct
         values so that you can check your results right away.
     3. Save the list variant
         Choose "Save" (Ctrl+F12) in the list. In the following dialog box,
         you can enter a name and a label for the list variant that will be
         stored together with your header layout.
         Note that general variants visible to every user have a name
                                                                       Page 3
       starting with the character '/'. User-specific variants on the other
       hand must begin with a letter and are only visible to you.
       Standard variants delivered by SAP in general start with a number
       and have preconfigured headers. You cannot change the SAP variants,
       but you can use them as template for your own enhancements, which
       you can store under another variant name.
   Valid releases
   Software Component                        Release
                                             from            to
   SAP_APPL
        SAP Application
                                             46C          - 46C
                                             46A          - 46B          X
   Further components
   FI-AP-AP-D
    Reporting/Analysis/Display
   FI-AR-AR-D
    Reporting/Display/Credit Management
   Reference to related Notes
   Number    Short text
   306225    Line item: page break when printing lists
   213144    Line item: Header information disappears
   181697    Line item: Header information is missing

CJI5 commitment line item report not showing po gross value

Dear All,
system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
Example:
po net value: 1000
st 10%: 100
po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
what could be the reason for not showing po gross value in commitment line item report.
Thanks & Regards,
Sandeep

Hi,
As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
Regards,
Gokul

RE: COPA report and customer line item report not matching

Hi All,
COPA report and customer line item reports (fd10n) are not matching please let me know the reason.

ok

Line item report on secondary cost element (cat - 21)

Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank you

Hi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose

Cost element and Line item reports show different actual costs

Hi PS experts,
My client has an issue pertaining to actual cost reports. The cost element report shows actual costs $42,000 for one WBS and when I double click to see details the value it shows is $2100. Even when I checked line item report for this WBS the value is $2100. What could be the reason for getting different values? If some one throw some light on this it would be great helpful to me
Regards,
Laxminarsimha

Laxminarsimha
The values in CJI3 should be correct and will include all postings (e.g. Settlement values) and possibly Actual Revenues unless a filter is in place - so take this as being your correct figure to start with.
Your drilldown will show the same value as CJI3 because it is CJI3
Any cost element report you are using is probably correct for what you are asking - is this a Standard Cost Element Report you are using or is it bespoke
One thing to be careful of when you drilldown on Cost Element Reports is that you do not always get the a make up of the value you have drilled down
e.g.
Cost Element Report was run for Period 1 to 6 2008 and shows £100.00
You drilldown and sometimes the drilldown automatically shows ALL line items e.g £500.00 (not just the values for periods 1 to 6 of 2008 which you may expect £100.00)
In the past I've removed the drilldown capability from bespoke cost element reports to prevent drilldown to the line item report (which is CJI3) because of this problem.
Usually where values for a a number of periods only (not total costs) was required
Other factors to consider
Revenues/Settlements may be excluded from Cost Element Report but will not be excluded from CJI3 unless you specifically restrict
You need to identify which types are postings are missing from the Cost Element Report (what is common...cost element, dr/cr indicator, business transaction)
I've also hit the mistake in the past where I've asked for periods 1 2007 to period 3 2008 and instead of giving me just over a years worth of actual it gave me actuals for periods 1 to 3 for 2007 and 1 to 3 for 2008.
Hope this helps
Steve

Message GU506 when branching to line item report

We have carried out a shortened fiscal year change and now when we use a existing report painter report to branch to the line item report, then the system generates Message GU506: "Posting period & is not defined for fiscal year variant &"
I have found SAP note 62138 which refers to the issue but this is for SAP release 3* and we are on the latest release ERP606
Has anyone else had the same issue before?
thanks

Hi,
Please check below:
Table PRPS: Select OBJNR and pass to RPSCO and check if any value exists there. Note down the Value type, Year.
While in CJI3, please check if any dynamic Selection is active, remove all.
if mutliple selection shows any exclusions, remove all.
Posting Data: Remove the values. (Or put from 01.01.1900 to 31.12.9999)
Select the standard SAP Layout (Starting with 1SAP)
Value type=11 should be selected by default (Ensure it is checked)
Hope it helps!
Thank you and Regards,
Varshal Kachole

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

WBS Element on AR/AP Line Item Report

Hi All
When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
Thank you
Rukshana

hi,
If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
For Ex
Expense 1 Dr 1000- WBS 1
Expense 2 Dr 1000- WBS 2
Expense 3 Dr 1000- WBS 3
Vendor A Cr 3000
Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
Thanks and regards
Praveen.J

COPA line item report, Number format -output type - object list(ALV).

Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
Regards

HI
What t-code you are using to write this line item report ?

Line item report with Customer number

Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.

If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period.

Create AP/AR line item report for parked items

Dear all,
Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
Does anyone know if this is actually possible?
many thanks

Hi,
by using of TCODE. FBV3 it is displaying parked documents
based on document type.
K.Satish

Manhours not refelecting in CJI3 Line item report

Similar Messages

Maybe you are looking for