Manipulation with dates

Hi,
The shift timing is from 7am to 3pm.
the actually machine working timings are stored in the machine_timing.
table machine_timing data like
(The table will have the actual machine working time in the shift.)
START_TIME END_TIME
13-06-2012 08:00:00 13-06-2012 13:00:00
13-06-2012 13:30:00 13-06-2012 15:30:00
when the machine is idle (not worked time)that time is stored in the idle_time_table
idle_time_table having data like
( from 7am to 8am the machine is idle for the above shift. so here idle time is one hour from 7am to 8am. and
the lunch break is 13:00 to 13:30 this is also stored in the idle_time_table )
START_TIME END_TIME
13-06-2012 07:00:00 13-06-2012 08:00:00
13-06-2012 13:00:00 13-06-2012 13:30:00
i want code for inserting data to the idle_time_table based on the data which is there in the machine_timing.
Edited by: user13272730 on Jun 13, 2012 5:44 AM

Hi user13272730
Here is an example ...
assuming a flag in machine_timing named e.g. inout values for 'I' checked in or 'O' checked out
the time or date is char data type u can create a data base trigger as follow...
CREATE OR REPLACE TRIGGER Emp_ATTENDANCES
AFTER INSERT ON machine_timing.
FOR EACH ROW
BEGIN
IF :NEW.att_inout='I' Then
  INSERT INTO idle_time_table(EMP_ID  , DATE_IN ,  DATE_OUT , TIME_IN  , TIME_OUT )
  VALUES                     (to_number(to_char(:NEW.att_emp_no,99999)) , to_date(:NEW.att_date,'dd/mm/rrrr'), to_date(:NEW.att_date,'dd/mm/rrrr') , to_date(:NEW.att_time,'HH24:MI:SS') , to_date(:NEW.att_time ,'HH24:MI:SS'));
ElsIF :NEW.att_inout='O' Then
  UPDATE idle_time_table 
  SET DATE_OUT  = to_date(:NEW.att_date,'dd/mm/rrrr'),
                TIME_OUT  = To_Date(To_Char(:NEW.ATT_DATE,'DD-MM-YYYY ') || To_Char(:NEW.ATT_TIME,'HH24:MI'),'DD-MM-YYYY HH24 MI');
               WHERE  EMP_ID    = :NEW.att_emp_no
               AND    DATE_OUT  = DATE_IN
               AND    TIME_OUT  = TIME_IN;
End IF;
EXCEPTION
  WHEN OTHERS THEN   RAISE;
END Emp_ATTENDANCES;Hope this helps...
Regards,
Amatu Allah

Similar Messages

  • Manipulations with Date

    i need to do some manipulations with dates, as like the following psuedo code.
    date a=feb 14 2007;
    date b=jan 31 2007;
    date c=a+1; //this should do c=feb 15 2007
    boolean before=b<a;//this should do as before= true
    boolean after=b<a;//this should do as after=falsei searched in util.date of API. But some constructors that i cud use do this are deprecated.
    So any ideas..

    Date in general is deprecated.No, not at all. Just many of the methods are. Date
    serves one role and calendar another.fusk u jverd u no nothing you pile of sh!t u got no
    rite to correct me etc blah blah noob loses it :-)Good morning to you too. :-)
    I never use Date. when would you prefer it over
    Calendar?When I want to represent an instant in time without needing to worry about human imposed chunkification into months, days, etc. And I use SimpleDateFormat for going between human enterable/readable strings and the "raw" Date representation.
    The only time I use Calendar is when I want to do day/week/month/year math on it, like "first day of the month" or "add one week" or "midnight on the day represented by this Date."

  • Manipulating with data types

    I working with the serial com, thru RS-232.
    I use byte[] to contain whatever that is returned from the device,
    I do a direct, system.out.print(readBuffer); *readBuffer = byte[]
    for example: the supposed value "FD" is shown as "-3" instead.
    Quesions:
    1. Is there a way to present the byte[] as a hexa representation? and how?
    2. I wish to do a binary compliment of some hexa values, is there an operator for such?
    i have tried...
    byte[0].toString()
    but given the error: byte cannot be dereferenced.
    thanks in advance for the help! ^^

    Hi,
    1) Loop over the array, and use Integer.toHexString to create a hex string for each value.
    2) Yes
    bitwise or   |
    bitwise and  &
    bitwise xor  ^/Kaj

  • Help With Date Manipulation

    Hi Everyone,
    I need help with oracle dates. I would like to format the following dates and keep it as a DATE datatype NOT char.
    1/10/2007 8:57:45 PM TO 1/10/2007 (only the data part of SYSDATE)
    1/10/2007 8:57:45 PM TO 1/1/2007 (first of the month)
    If I use the To_Char function, it will return a character string. The problem is that I need to retain the DATE datatype so I can join this query to tables with date fields.

    This?
    sql>
    select trunc(sysdate)
    from dual;
    TRUNC(SYSD 
    01/11/2007                                                                                                                                                                           

  • Report data binding error with date values

    I have CF7.02 with a Microsoft Visual FoxPro 9.0 SP1 Database
    that I connect to using ODBC (FoxPro Driver 6.01.8630.01). I send
    my sql results to a CF Report Builder 7.02 PDF report and it works
    fine. If I dump the date values before I change them, they look
    like the following: {ts '2004-12-20 00:00:00'} . However I have
    tried a number of ways of manipulating the date before sending it
    to the report, but I continue to get errors. I don't care what
    format they go to the report in, since the report reformats them
    anyway. I checked to make sure that none of the dates were null.
    For example <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDateTime(#ldCFPrcInputDate#) /> yields values in the
    {ts '2004-12-20 00:00:00'} format when I dump the query results to
    screen. Where:
    ldCFPrcInputDate = 12/20/2004
    CreateODBCDateTime(ldCFPrcInputDate) = {ts '2004-12-20
    00:00:00'}
    ReportQuery.PrcInputDate[lcCurRow] = {ts '2004-12-20
    00:00:00'}
    I get the error:
    Report data binding error Unable to get value for field
    'prcinputdate' of class 'java.util.Date'.
    coldfusion.runtime.OleDateTime -> Date
    Not using the CreateODBCDate function for example <cfset
    ReportQuery.PrcInputDate[lcCurRow] = #ldCFPrcInputDate# /> I
    get:
    Report data binding error Unable to get value for field
    'prcinputdate' of class 'java.util.Date'.
    java.lang.String -> Date
    Here are some of my failed attempts:
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDateTime(#ldCFPrcInputDate#) />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    #ldCFPrcInputDate# />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    DateFormat(CreateODBCDate(#ldCFPrcInputDate#),'mm/dd/yyyy') />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm/dd/yyyy') />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm-dd-yyyy') />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    Trim(createODBCDateTime(ldtmpdate)) />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDate({05-07-2006}) />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDate('{05-07-2006}') />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDate(05/07/2006) />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDate('05/07/2006')/>
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    CreateODBCDate(parseDateTime('05/07/2006')) />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    parseDateTime(CreateODBCDateTime(05/07/2006)) />
    <cfset ReportQuery.PrcInputDate[lcCurRow] =
    parseDateTime(CreateODBCDateTime('#ldCFPrcInputDate#')) />
    <cfset ReportQuery.PrcInputDate[lcCurRow] = '{05-07-2006}'
    />
    <cfset ReportQuery.PrcInputDate[lcCurRow] = '{05/07/2006}'
    />
    <cfset ReportQuery.PrcInputDate[lcCurRow] = '05/07/2006'
    />
    I also did some googling without success. Any help is
    appreciated.

    You may want to make sure that the column is not included in
    the query variable list in your report cfr file.
    The newest version of the Report Builder, which may be
    installed on the server, no longer tolerates vars appearing in that
    list of they are not in the query itselft.

  • Query to extract HTML tag with data

    Hi All,
    I have a string.
    '<HTML><HEAD>THIS IS HEAD.</HEAD><BODY>THIS IS BODY.<P>THIS IS P1.</P>NIMISH<P>THIS IS P2.</P></BODY></HTML>'
    I want to extract a html tag including its opening & closing tab with data as
    if i say P1
    then the output should be
    '<P>THIS IS P1.</P>'
    for P2
    then the output should be
    <P>THIS IS P2.</P>
    please help me in writing this query with regular expression
    i have tried it as following but it is not giving desired result:
    WITH T AS
    SELECT
        '<HTML><HEAD>THIS IS HEAD.</HEAD><BODY>THIS IS BODY.<P>THIS IS P1.</P>NIMISH<P>THIS IS P2.</P></BODY></HTML>' STR
    FROM   
        DUAL
    SELECT REGEXP_SUBSTR(STR, '<P>.+P2.+</P>') FROM T
    Thanks & Regards
    Nimish GargEdited by: Nimish Garg on May 7, 2012 5:49 PM

    Nimish Garg wrote:
    My requirement is to extract a <tag>data</tag> from a HTML/XML string
    where data contains any specified value.HTML is not XML.
    And that is a critical distinction to make. HTML parsing is horribly complex. XML is quite easy. For HTML you have to code your own parser in PL/SQL. XML can be parsed using the XMLTYPE class/data type in PL/SQL.
    So if you need to find a single specific tag in HTML - I would not try to treat it as XML. I may not even try to use regular expressions.
    I would do a basic substring search for the start of the tag. Read the data following the tag. Ensure that there are no nested or embedded tags in the data. Until the end tag is read. Because HTML is that much abused - and because that is an accepted norm as parsers used by browsers deals with that abuse without complaining.
    Proper HTML is mostly a myth in my experience of "screen scraping" web servers for data extraction as they do not have web services supplying the data.

  • Can not see the option Execution with Data Change in the infoprovider?

    Hi team,
    i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
    i can not see the option "Execution with Data Change in the infoprovider",
    i can only see 2 options
    Direct scheduling in background process
    create new scheduling
    periodic,
    is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
    kindly assist

    Hi Blusky ,
    check the below given link.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
    Regards,
    Rohit Garg

  • Can Not Remove "with" Data from Calendar Event Details

    I currently have a Palm Tungsten|E2. For a short time I used to sync it with my work computer; this was before they replaced the computer (lease was up) with a new one where it was locked down and I could not reinstall the Palm desktop. Since then I have been syncing it with my home computer that runs MS Vista. Just recently I have noticed that when I create new Calendar events on my Palm, they all get a new "With:" data line (and a user from my old job) after sync'ing with my home computer. Selecting this "With:" entry brings me to a screen that allows me to select from a list of people I may "Done", "Reply", or "Reply All" to; although selecting either reply only causes a fatal error that requires a soft reset (button on back of machine). Looking at the event through the desktop software shows no data point so that it may be cleaned.
    I would like to know why my desktop software is adding this person to a "With:" data point to all new entires I create on the Palm hardware, how do I turn it off and keep it from doing it in the future.
    Steve
    Post relates to: Tungsten E2
    This question was solved.
    View Solution.

    Are you sync'ing the new device to the same username in Palm Desktop as an older device?
    If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
    The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
    Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
    Make sure you select all for the range in the export window.
    With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
    Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
    With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
    Looks like you may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
    XP
    C:\program files\palm or palm one\[hotsync username]\ and rename your backup
    folder to backup.old
    Vista
    Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
    folder to backup.old
    Then hotsync to your current hotsync name and all your contacts, calendar,
    tasks, and memos will come back over.
    Show file extensions for XP or Vista
    XP
    If you can not view file extensions on your PC I would like you to open a
    folder go to Tools-->Folder Options--> View (tab) and under show hidden
    files and folders uncheck hide file extensions for known file types.
    Vista
    Open control Panel go to Folder Options--> View (tab) and under show hidden
    files and folders uncheck hide file extensions for known file types.
    Post relates to: Palm i705

  • Compare data in R/3 with data in a BW Cube after the daily delta loads

    Hi Friends,
    How can I compare data in R/3 with data in a BW Cube after the daily delta loads? Are there any standard procedures for checking them or matching the number of records?

    Hi Sunil,
    If you want to check the records daily instead of checking the data in R/3 manually ......
    You can try this...
    If you have staging DSO(level 1) that means whatever data is in source system load it to Staging DSO without any routines or any modifications.
    Now load this DSO data to Cube or DSO(level 2) as per your requirement with routines etc.
    Now Staging DSO contains Source system data.
    Now the level 2 Cube or DSO contains BW data with some modifications.
    Now create a Multiprovider based on level 1 and level 2 data targets.
    Now create a report on which keyfigures you want to test the data.
    In Multiprovider there is a field called 0infoprovider in data packet dimension.
    you can drag this infoprovider to the columns and restict your keyfigures with level 1 and level 2 data targets.
    In the first column you can see the level 1 DSO data ( source system data),in the 2nd column you can see the BW data.
    Now create a formula which gives the diffrence b/n level 1 and level2.
    that is R/3 data - BW data.
    If the diffrence is zero both R/3 and BW data are same.
    if the diffrence is not eqaul to zero check whether any routine is there or not.

  • JDBC MS Access--- cannot extract entry with null value with data type Meta

    I'm trying to extract a data entry with null value by using JDBC. The database is MS Access.
    The question is how to extract null entry with data type memo? The following code works when the label has data type Text, but it throws sqlException when the data type is memo.
    Any advice will be appreciated! thanks!
    Following are the table description and JDBC code:
    test table has the following attributes:
    Field name Data Type
    name Text
    label Memo
    table contents:
    name label
    me null
    you gates
    Code:
    String query = "SELECT name, label FROM test where name like 'me' ";
    ResultSet rs = stmt.executeQuery(query);
    while (rs.next())
    String name = rs.getString("name");
    rs.getString("val");
    String label = rs.getString("label");
    System.out.println("\t"+name+"\t"+label);
    catch (SQLException ex)
    System.out.println(ex.getSQLState());
    System.out.println(ex.getErrorCode());
    System.out.println("in sqlexception");
    output:
    C:\Temp\SEFormExtractor>java DBTest
    yet SELECT name, label FROM test
    null
    0
    in sqlexception

    The question is how to extract null entry with data type memo?Okay, what you need to do is this:
    if (rs.getString("val") == null)
      // do something
    }This way, when it's a null value, you can check it first, and then handle it how you want, rather than getting an exception.

  • Cube loaded with data, but unavailable in the query

    Hello everyone,
    Someone can help me?
    I created a new Cube CO-PA for the year 2010, and loaded with data this year. To make sure that the data were correct did a ListCube, with all the filter equal to the query, and indeed the data is loaded properly for this year. And when i run the query with data from the years 2008 and 2009 show me  data in my report, but when I run the query for 2010, the query displays an error message saying that "no data".
    How is it possible to have the correct data in the Cube, and i can not view the data in the query?
    Note: The request in the cube is available to report
    Thank you all,
    Greetings,
    Maria João
    30-Março 2010

    Hello,
    I was in trouble because I had not selected the key figures in the multicube : S
    After selecting the key figures, I ran the query and it had data.
    Thank you for your help.
    Sincerely,
    Maria Joã

  • How to create a report with data using the Crystal Reports for Java SDK

    Hi,
    How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
    I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats.  I can create my own report through the following code snippet:
    ReportClientDocument boReportClientDocument = new ReportClientDocument();
    boReportClientDocument.newDocument();
    However, I cannot find a way to add data elements to the report without specifying an RPT file.  Is this possible?  I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
    is there a way to do this through these packages?
    com.crystaldecisions.sdk.occa.report.data
    com.crystaldecisions.sdk.occa.report.definition
    Am I forced to create a RPT file for the different table and column structures I have? 
    Thank you in advance for any insights.
    Ted Jenney

    Hi Rameez,
    After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser.  I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
    Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
    <%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
    <%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
    <%
    try { 
                ReportClientDocument rcd = new ReportClientDocument();
                rcd.newDocument();
    // Setup the DB connection
                String database_dll = "Sqlsrv32.dll";
                String db = "qa_start_2012";
                String dsn = "SQL Server";
                String userName = "sa";
                String pwd = "sa";
                // Create the DB connection
                ConnectionInfo oConnectionInfo = new ConnectionInfo();
                PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
                // Set new table logon properties
                PropertyBag oPropertyBag2 = new PropertyBag();
                oPropertyBag2.put("DSN", dsn);
                oPropertyBag2.put("Data Source", db);
                // Set the connection info objects members
                // 1. Pass the Logon Properties to the main PropertyBag
                // 2. Set the Server Description to the new **System DSN**
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
                oPropertyBag1.put("Database DLL", database_dll);
                oConnectionInfo.setAttributes(oPropertyBag1);
                oConnectionInfo.setUserName(userName);
                oConnectionInfo.setPassword(pwd);
                // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
                oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
    // Add a Database table
              String tableName = "Building";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
        catch(ReportSDKException RsdkEx) {
                out.println(RsdkEx);  
        catch (Exception ex) {
              out.println(ex);  
    %>
    Throws the exception
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
    There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
              String tableName = "Building";
                String fieldname = "Building_Name";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setAlias(tableName);
                oTable.setQualifiedName(tableName);
                oTable.setDescription(tableName) ;
                Fields fields = new Fields();
                DBField field = new DBField();
                field.setDescription(fieldname);
                field.setHeadingText(fieldname);
                field.setName(fieldname);
                field.setType(FieldValueType.stringField);
                field.setLength(40);
                fields.add(field);
                oTable.setDataFields(fields);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
    This code succeeds, but it is not clear how to add that database field to a section.  If I attempt to call the following:
    FieldObject oFieldObject = new FieldObject();
                oFieldObject.setDataSourceName(field.getFormulaForm());
                oFieldObject.setFieldValueType(field.getType());
                // Now add it to the section
                oFieldObject.setLeft(3120);
                oFieldObject.setTop(120);
                oFieldObject.setWidth(1911);
                oFieldObject.setHeight(226);
                rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
    Then I get an error (which is not unexpected)
    com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
    How do I add one of the table.SetDataFields()  to my report to be displayed?
    Are there any other pointers or suggestions you may have?
    Thank you

  • The timesheet creation failed, because of problems with the project I server or with data validation

    Hi,
    One of my user is facing issue in creating new time sheet,
    "The time sheet creation failed, because of problems with the project server or with data validations".
    This issue is coming to only few members out of 10000 members.
    Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
    Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
    Many thanks in advance.

    I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
    Ben Howard [MVP] | web |
    blog | book

  • Problem with Date Picker and wwv_flow_item.date_popup()

    I have a Report based on the HTMLDB How-To “Build Tabular Forms for Multi-Row Operations”
    This is my code:
    select
    X.RRIT_UID,
    X.DOS,
    X.CPT_CODE,
    X.MOD,
    X.DX_CODE,
    X.CHARGES,
    X.UNITS
    from
    (select
    htmldb_item.text(1,RRIT_UID) RRIT_UID,
    wwv_flow_item.date_popup(2,null,RRIT_DATE_OF_SERVICE) DOS,
    htmldb_item.text(4,RRIT_SUBMIT_SERVICE_CODE,6) CPT_CODE,
    htmldb_item.text(5,RRIT_SUBMIT_MODIFIER,3) MOD,
    htmldb_item.text(6,RRIT_ATT_DIAG_CODE,6) DX_CODE,
    htmldb_item.text(7,RRIT_BILLED_CHARGES,9) CHARGES,
    htmldb_item.text(8,RRIT_UNITS,3) UNITS
    from
    RRIT_REPRICE_ITEM
    where
    RRRR_UID = :P5_RRRR_UID
    union all
    select
    htmldb_item.text(1,null) RRIT_UID,
    wwv_flow_item.date_popup(2,null,null) DOS,
    htmldb_item.text(4,null,6) CPT_CODE,
    htmldb_item.text(5,null,3) MOD,
    htmldb_item.text(6,null,6) DX_CODE,
    htmldb_item.text(7,null,9) CHARGES,
    htmldb_item.text(8,null,3) UNITS
    from
    dual)
    X
    My problem is when I run the page and select a date from the Pop-Up calendar I get this error:
    Line 10
    Error: ‘opener.document.forms.0.f02.0’ is null or not an object
    I know it is something to do with data formats and the fact that I do not fully understand the use of wwv_flow_item.date_popup().

    Hi DK,
    It is a WD Java application, Backend is ABAP (MM module).
    The UI is input field, where the context attribute type is Date, So its been changed to Date Picker.
    The problem is when the user runs the WD application in Portal, The calendar format is being changed for some users. That is for few users the Week starts with Monday and for few users the week starts with Sunday.
    I need all the users to have Monday as the First day of the week.
    Please let me know, what will be solution for this.
    Since I haven't done anything in regard to date, it is a simple Date format.
    Thanks & Regards,
    Palani

  • Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

    having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
    I'm using Lion on an MBP and Numbers is the latest version

    May you give more details about what is wrong with your dates ?
    M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
    When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
    To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
    Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

Maybe you are looking for

  • Remove numbers after filename and add custom sequence?

    Hi, I have to rename quite much of rendered frames which names are like aoPass_000001.png...aoPass_099999.png. I have to replace those numbers to start from 0111111 for example witch I'll input manually when I run rename process. Right now I do it us

  • Cannot connect Ipod to Itunes, error messages

    I just unpacked my brand new Ipod Touch 16 Gb, in version 1.1.2. I have the most serious problems to get a reliable connection to ITunes. In 1 case out of 20 it works, but usually I get a couple of error messages: a) itunes could not connect to Iphon

  • "Licensing for this product has stopped working" with error: 150:30.

    I purchased CS4 as a download in 2011. Was working fine on my new Macbook Pro with Yosemite then this appeared.

  • Tracks in nwdi

    Hi, there are tracks in nwdi and need to do mofification if requriement and want to  deploy the trackinto new server from old server? how to deploy the tracks in new server from old server?

  • Convert to PDF from Bank Web

    why when I creat a PDF page from some web sites it does not show  the letters especially banks web pages, rather it show them incripted?