Mannual assignment of tasklist to 03 type lots

Hi All,
I need to assign the task list (Routing Master Recipe, hence we are using Process Order) manually to 03-inspection type generated lots.
I have checked the possibilities in the in IMG, but the option is not available there in for this particular inspection type default values. Pls let me know if there is any other way out.
With Best Regards,
Shyamal Joshi

Hello Shyamal,
if you are having problems in assigning a task list then I would strongly recommend that you check if the implementation of the EXIT QPL10001 can help resolve this issue. This exit can be called via the QA02 transaction during the task list selection.
I hope that this information helps resolve your issue.
Regards,
Isabelle
Edited by: Isabelle Britten on Feb 20, 2008 9:30 AM

Similar Messages

BUPA_MAIN BDOC Error AM 605 - Assignment of usage & to communication type &

Hi Experts,
In our ISU to CRM replication of the Business partner we are seeing lots of BDOC error AM 605 - Assignment of usage & to communication type & not unique.
I have figured that the error occurs when the CONSNUMBER in the ADR* table reaches 999. Therefore, no more entries can be added for the communication type (ie another phone number) for that particular address number.
But the behaviour in our case is such that CONSNUMBER is reaching 999 by skiping many numbers ( i am not sure if thsi is the standard behavior or something is wrong), so its not the consistent behaviour. In some cases it suddely skips the CONSNUMBER range say which is at 400 for particular address number and goes to 990 range and reaches 999, the BDOC errors out.
We applied note 1070798 - Repair the consnumber in communication tables. The program Z_OSSNOTE_1070798 will be run to reorganize the consnumber, so no entry is at 999. Although this reorganies the number but this only acts as a fix after the error is already encountered.
We still see the AM 605 error , can any one please suggest is there any way to avoid this BDOC Error from occuring. We see these error in case of organisation BPs having many addresses and their phone number in table ADR2 CONSNUMBER reaches 999.
Immediate help is greatly appreciated.
Thanks,
Jessica

Hi Jessica,
Were you able to fix this issue of fill all required entries error?
i have a same error with my project too.
Yes, you know me. We worked in the same project earlier, now i am in this new project, where i get the same old error.
Thanks
Keerthi

How to assigne value in sub record type

Dear below mention record type database,now i want to assigne value in payr_rec type,in this recrocrd type have one column party_id,but how can assigne value int this field ,
TYPE group_rec_type IS RECORD(
group_name VARCHAR2(255),
group_type VARCHAR2(30),
created_by_module VARCHAR2(150),
-- Bug 2467872
mission_statement VARCHAR2(2000),
application_id NUMBER,
party_rec PARTY_REC_TYPE := G_MISS_PARTY_REC
please guide.

to get the desired default party_rec attribute value, just assign the "sub-record" attribute defaults as desired; PL/SQL will assign a default (non-null) record as the party_rec value using those attribute defaults:
create or replace package P_Test_It
as
     type party_rec_type is record (
          dummy varchar2(1) default 'X'
     type group_rec_type is record (
          group_name VARCHAR2(255),
          group_type VARCHAR2(30),
          created_by_module VARCHAR2(150),
          -- Bug 2467872
          mission_statement VARCHAR2(2000),
          application_id NUMBER,
          party_rec PARTY_REC_TYPE
end;
set serveroutput on
declare
     rec p_test_it.group_rec_type;
begin
     dbms_output.put_line(rec.party_rec.dummy);
end;
X
PL/SQL procedure successfully completed.Hope it helps.
Gerard

"In initializer for 'mxmlContent', type Object is not assignable to target Array element type..."

Hi all,
So I've have built an application on flash builder 4.5 using Christophe Coenraets' tutorial "Building an EmployeeDirectory" (http://www.adobe.com/devnet/flex/articles/employee-directory-android-flex.html#articlecont entAdobe_numberedheader).
I'm getting this error message "In initializer for 'mxmlContent', type Object is not assignable to target Array element type mx.core.IVisualElement." and then the debugger highlights my code this line of my code "</s:List>" in my EmployeeDetails.mxml file. This started after I coded Part 5, Step 2 "Integrating with the Device Capabilities: Triggering the Actions". The rest of the code debugged fine.
I think it relates to Christophe's note "Note: Make sure you import spark.events.IndexChangeEvent (and not mx.events.IndexChangedEvent) for this code to compile.". I don't know where to place this
" import spark.events.IndexChangeEvent;" line of code.
Any help? Tks in advance..
Any help would be greatly appreciated. Thanks

You have a DataGrid directly inside a State element. Perhaps wrap it in an AddChild element?
More information on using states can be found here:
http://livedocs.adobe.com/flex/3/html/help.html?content=using_states_1.html

Where to assign cost cnetre and actvity type

hi
all
can any body tai lme
where to assign cost cnetre and actvity type
i assgn this actvity type in work center
so than when ia ssign ctr to work cnetre
actvity type automatically seen there

i got some thing
whats about teh date teh date mentioned in
ctr-01.04.2007 to 31.12.2999
kl01-01.04.2007 to 31.12.299
now iam going to craet work cnterin costing tab the validy date i also mention the same 01.04.2007 to 31.12.2099
what should imaintain in kp26
should i maintain the version 0 and what to writte in from to to period
any idea

Re: assign profit center to order type

hi gurus,
good morning to everybody,
i have a question i have 1000 materials in my organization using by 5 company codes in that few material i need to assign profit center so i went to mm change and assigned the profit center for sales:general/plant and plant data/stor.2, if i want to assign profit center to order type how can i assign, if i cannot assign in order type i need to assign profit center in mm change for 500 materials, so if i change manually in mm change for 500 materials is it going to effect for the other company code when they post the transactions please give me your opinions.
thanks in advance and points will be assign for useful answers.
kumar.

Dear Kumar
Go to VA02, input the sale order reference and execute. There double click on the line item and select the tab "Account Assignment". There you can see the field "Profit Center".
As I said in your other thread, if you have generated subsequent documents like delivery or billing, you cannot change this for that line item. You have to close this line item by assigning "Reason for Rejection", and create a new line item but then, b4 doing this, you should have changed the profit center in material master.
Alternatively, if you want to update in bulk, go to T.Code MASS, input "BUS2032" in Object Type and execute. There select "Sales Order Item Data" and click on "Fields".
Select the field name "MASSVBAP-PRCTR" and execute. Either you can input the sale order references for which you would like to change or just execute.
Now you will have a screen "New Values" on top and below the existing sale orders listed. Give the new profit center against the field "New Values" and execute.
thanks
G. Lakshmipathi

Assigning parameters to custom page types

I am creating a custom portlet that displays a banner at the top of a page. The banner that the portlet displays is dependant on the value of a parameter being passed into it. So for example if I set the parameter to equal 'finance' it would display a banner specific to the finace department e.t.c. The idea of this approach is that we only have to create one template (rather than one for every department).
I do not want users who create pages to have to go into every page they create and manually set the parameter values for their specific department. (within page properties > parameters). Instead I wish to create some custom page types that have pre-defined parameters set against them. My question is - Is it possible to assign parameters to custom page types (preferably as a hidden field so users cant accidently change it) and if so how? If not does anyone know a better way of doing it?

You can't do this with parameters, but you can do it with custom page type attributes. Set default values for the attributes and have the portlet query the WWSBR_FOLDER_ATTRIBUTES view to get the values (or you could just check the page type in WWSBR_ALL_FOLDERS and not use an attribute at all).
To get the pageid that you'll need for the query, use the function WWCTX_API_PARAMETERS.GET_VALUE('_pageid',p_reference_path).
Regards,
Jerry
PortalPM

Selected communication channel IDoc_AAE_In is assigned to the wrong adapter type IDoc_AAE Supported adapter types: HTTP, SOAP, XI, WS.

Hi Team,
I have a problem.
I have a scenario using the the Sender Adapter. HTTP_AAE
When I am trying to use the function "Display WSDL" I am receiving the following.
Error:
Selected communication channel HTTP_AAE_In_SAPII is assigned to the wrong adapter type HTTP_AAE Supported adapter types: HTTP, SOAP, XI, WS.
Somebody knows this problem?
Thanks

Hi,
am also getting same error.
think that feature is not supported.
have look on Configuring the Java HTTP Adapter on the Sender Channel - Advanced Adapter Engine - SAP Library for sending a message.
reg,avinash M

Display mode for Account assignment category for NB document type

Dear MM gurus,
Is it possible to have Account assignment category field in ME21N for document type NB to be display only. Could any one please advised if this is possible?
Thanks in advance.

Hi,
Yes it is possible. But u have to define ur own Field selection for the PO document type and u have to assign it in the document type NB. Go to SPRO>IMG>MM>Purchasing>Purchase Order-->Define Screen Layout at Document Level

Assigning different colors to different types of events

Is it possible to assign different colors to different types of events within the same calendar?
If so, how can that be done?
Thanks for your feedback.

Greetings,
The color choices in iCal are defined by calendar. So events in the same calendar will all be the same color. If you want them to be a different color, move them to a different calendar and assign the color of your choice to that calendar.
Hope that helps.

Hi, plz help me how to assign my PO to output types

plz help me how to assign my PO to output types through Nace t-code.what form routine?

Murli,
the settings in MN05 for PO.
NACE is the Tcode used to link the Application type, Output Types and its processing Routines like ( Driver programs and attached Script forms or Smartforms).
You should know the Application of a document first Like:
for PO it is EF, for sales Doc's it is V1, for Delivery docs it is V2, for billing Doc's it is V3 etc.
so first select the Application type (ex: EF) for PO and press OUtput types
then a list will come in that you should know the related output type for PO.
select any outtype and click on the processing Routines button on the left side
it will display the Medium, Driver Program and the Script form or smartform related to that document..
Reward points if it is helpful..
Amit.

Wht does it mean - "ASSIGN it_DB_TBL_name TO fs1 CASTING TYPE x"?

Hi Experts,
Just curious,
Pls. let me know that, Wht is the functionality of the following statement:
ASSIGN it_DB_TBL_name TO <fs1> CASTING TYPE x
thanq

ASSIGN feld TO <fs> CASTING TYPE type.
ASSIGN feld TO <fs> CASTING TYPE (typename).
ASSIGN feld TO <fs> CASTING LIKE fld.
ASSIGN feld TO <fs> CASTING DECIMALS dec.
You can use ASSIGN ... CASTING to treat the contents of a field as a value of another type using a field symbol. One application for this statement would be to provide different views on a structure with casts on different types.
One wide-spread ABAP technique is to use C fields or structures as containers for storing structures of different types that are frequently only known at runtime. The components of the structure are selected with offset/length accesses to the container. Since this technique no longer works with Unicode, you can also look upon an existing memory area as a container with the suitable type definition using a field symbol with the ASSIGN ... CASTING statement. In the next example, a certain field of database table X031L is read, whereby the field and table names are only defined at runtime.
Example:
* Read a field of table X031L
PARAMETERS:
TAB_NAME    LIKE SY-TNAME,             "Table name
TAB_COMP    LIKE X031L-FIELDNAME,      "Field name
ANZAHL      TYPE I DEFAULT 10.         "Number of lines
DATA:
BEGIN OF BUFFER,
    ALIGNMENT TYPE F,                    "Alignment
    C(8000)   TYPE C,                    "Table contents
END OF BUFFER.
FIELD-SYMBOLS:
<WA>   TYPE ANY,
   TYPE ANY.
* Set field symbol with suitable to buffer area
ASSIGN BUFFER TO <WA> CASTING TYPE (TAB_NAME).
SELECT * FROM (TAB_NAME) INTO <WA>.
CHECK SY-DBCNT < ANZAHL.
ASSIGN COMPONENT TAB_COMP OF STRUCTURE <WA> TO .
WRITE: / TAB_COMP, .
ENDSELECT.
Until now, in the ASSIGN feld TO <f> CASTING ... statement, the system checked to ensure that the field was at least as long as the type that was assigned to the field symbol, <f>. (Field symbols can either be typed at declaration or the type specified in an ASSIGN statement using CASTING TYPE). The syntax check is now more thorough. Now, you can only assign the field field (in either a Unicode or non-Unicode program)
provided it is at least as long as the type assigned to the field symbol <f>. Otherwise, the system returns a syntax error. At runtime, the system only checks to see whether or not the lengths are compatible in the current system (as before).
If the field type or field symbol type is a deep structure, the system also checks that the offset and type of all the reference components match in the area of field that is covered by <f>. The syntax check is now more thorough. Now, the system checks that these components must be compatible with all systems, whether they have a one-byte, double-byte, or four-byte character length. At runtime, the system only checks to see whether or not the reference components are compatible in the current system
In Unicode systems, in the ASSIGN str TO <f> TYPE C/N and ASSIGN str TO <f> CASTING TYPE C/N statements, the length of str may not always be a multiple of the character length, in which case the program terminates at runtime.

Assignment of IM-WM movement types

Hi everyone
can anybody explain me how this is happening
in OMLR transaction assignment of WM-IM mov types, i have not maintained 601 mov type entry ie,... the entry IMmov type 601 and WM mov type 601 with all the fields in between....
but i wonder how the system is allowing me to create TO for the delivery and reverse the same...and even i can find WM mov type 601 in delivery at the time of creating this TO.....
pls try to anser me how the system is automatically picking this WM mov type and allowing me to create TO........

Every IM movement type will have a WM reference movement type. This can be found at SPRO->LE->WM->Interfaces->IM->Define Movement Types->Assign WM Movement Type References to IM Movement Types.
The system references the above for the WM movement type and this is stored in SPRO->LE->WM->Interfaces->IM->Define Movement Types->LE-WM Interface to Inventory Management.
The system further allows to configure the movement type for a warehouse at (eg., source bin, destination bin, screen sequence, TR creation etc) in SPRO->LE->WM->Activities->Transfers->Define Movement Types.
With the above three the system will know what has to be done for each movement type.
hith
Sunil Achyut

How to assign Date Rules to Duration Types?

Hi gurus,
can someone kindly point where in Customizing do I assign a newly created Date Rule for a custom Duration Type? I created a new Date Rule to calculate the duration between two Date Types, but as I was creating my Date Profile i couldn't see any configuration to assign Date Rules to Duration types (in contrast, you can directly specify which date rules to use per Date type).
Regards,
Marc

Dear Experts,
Can any one let me know in inicident management process in sap crm 7.02 EHP2.
I do not see any entry in the first response by and due date by fields
please advise.
1.I am populating the SLA based on categorizations, in cat schema I have assigned the service product which has the service profile and the response profile.
2.please also let me know availabilty times should only be set for service provide BP or it should be for sold to party and the requester BP as well.
3.also once I enter the requestor the customer (sold to party) entry pops up but the system also suggest the requestor as well as sold to party... please let me know where am I wrong.
4. I have not touched the middleware part, however I see an error" document is being distributed changes cannot be possible" when I try to edit any incident, RFC or Knowledge article.. please guide me some steps to fix this.
5.what are the replication objects I need to consider if ineed to integrate the HR and FICO with SAP CRM.
from HR I need org structure and Employee master .
From FICO : ASsets please advise.
Appreciate if any one could answers these quieries.... thanks in advance.

You can only assigned two originals for document type DRW

hello,
while going for cv02n in PM ,when i try to attached more than two documents its shows me an error saying that
You can only assigned two originals for document type DRW
but i want to attach more document at same time.
kiran.

hey ....thanks
Iring
but when i try to it by this way ,the setting for vault under which the file has to check-in
is coming in that list but it shows the error saying that You are not authorized for activity 52 document type KPR...
when i try to do it under DRW it is allowing me to check in only for 2 documents when i try to attach 3 rd file it gives me an
error
You can only assigned two originals for document type DRW
waiting for your reply
kiran.

Mannual assignment of tasklist to 03 type lots

Similar Messages

Maybe you are looking for