Mannual update a package in DTP
Hi Experts
In the version 3.x we have the option (in case of failing) to mannual update an Package in the request, however i could not find the same option in the DTP. Does anyone know if this is possible?
If yes, where i can find this option?
If no, how should I proceed now?
Thanks
Hi Rody,
In the 7.x release the idea is that you use the error handling functionality in the DTP to update data packages that have
errors. In 7.x the option to manually update a request does not exist like in 3.x, in the monitor if you select the menu
option 'Request' you should have the option to 'Post manually' the request. In this case the complete RED request
is reloaded but you don't need to delete the existing request from the data target.
Best Regards,
Des.
Similar Messages
-
Error in update of packaging material data in mat. master
Hi all ,
Actually , when I was going to update the packaging material information in material master , that time noticed whole parameters - blank spaces / attributes of the packaging material data area is not showing . Why it behaves as ? ...
regards
arghyaThis just tells me that you do not even know the basics of a material type.
SAP does not check the material type name, VERP and ROH is nothing else than a couple characters from the alphabet (in German language they even make some sense). You can create your own material type HUXX for handling units and if it is correctly setup then it will work.
How long do you consider yourself as a newcomer? you have registered in 2010. You started with SD, then MM (were all your questions got rejected because you failed to search) and now Logistics Execution (by the way I am moderator here too). And everywhere you were told to use Google to search prior to posting. Spend more time to increase the skills on searching, this gets you more benefits on the long run.
And in the 5th year with SAP and SCN you should at least know how to report an issue. If you have an error message, then tell the exact message along with the message number. Saying the setup is properly and then complaining that the system is asking for something else does not help to solve the issue, as it it just reflects your assumption but does not tell any facts.
If everything would be properly setup, then you would not have an issue. Does that sound logical?
Start from wikis like that Logistics General Handling Unit Introduction - ERP SCM - SCN Wiki
or from help.sap.com, just search with this string in google: sap best practices handling unit management -
Can't update my packages.
When I run pacman -Syu it tried to update these packages
arandr-0.1.6-1 bison-2.5.1-1 dbus-python-1.0.0-1 [removal]
dwarffortress-0.34.11-1 fakeroot-1.18.4-1 filesystem-2012.6-2
firefox-13.0-1 gnutls-3.0.20-1 krb5-1.10.2-1 libgksu-2.0.12-5
linux-3.4.1-1 pam-1.1.5-4 pambase-20120602-1
python-dbus-common-1.1.0-1 python2-dbus-1.1.0-1
systemd-tools-185-1
It downloads all the packages and begins to install them, but stops and returns
error: failed to commit transaction (conflicting files)
filesystem: /var/lock exists in filesystem
filesystem: /var/run exists in filesystem
Errors occurred, no packages were upgraded.
Dow any of you know what to do? Can I remove /var/lock and /var/run?Please search the forums. This issue has been discussed so many times, its not even funny. Specifically look at the stickies in the Newbie Corner.
Closing... -
Revision: 10059
Author: [email protected]
Date: 2009-09-08 11:31:48 -0700 (Tue, 08 Sep 2009)
Log Message:
update two package-info.java files, and add one new one.
Modified Paths:
blazeds/trunk/modules/proxy/src/flex/messaging/services/http/proxy/package-info.java
Added Paths:
blazeds/trunk/modules/core/src/flex/messaging/util/concurrent/package-info.java
blazeds/trunk/modules/core/src/flex/messaging/validators/package-info.javaRevision: 10059
Author: [email protected]
Date: 2009-09-08 11:31:48 -0700 (Tue, 08 Sep 2009)
Log Message:
update two package-info.java files, and add one new one.
Modified Paths:
blazeds/trunk/modules/proxy/src/flex/messaging/services/http/proxy/package-info.java
Added Paths:
blazeds/trunk/modules/core/src/flex/messaging/util/concurrent/package-info.java
blazeds/trunk/modules/core/src/flex/messaging/validators/package-info.java -
Should i update required packages separately using yum ??
Hello Experts and Everyone !
Good NOON !
@ FYI
Sorry for posting almost related my previous questions. This is similar to my previous question but
NOT a duplicate question. so please don't lock this question. This thread having different doubts.
I think , this time i did successfully installing packages using yum.
I have to install 10g r2( 10.2.0.1) on OEL 5.5.
Before installing oracle , i need some confirmation from experts because i am preparing doc for practice.
DID I FINISH SUCCESSFULLY ??
# cd /etc/yum.repos.d
# vi cd.repo
[cd]
name=CD
baseurl=file:///mnt/Server
enabled=1
gpgcheck=0
[root@oracle yum.repos.d]# yum repolist
Loaded plugins: security
repo id repo name status
cd CD enabled: 2,334
repolist: 2,334
[root@oracle yum.repos.d]# yum install kernel-headers
Loaded plugins: security
Setting up Install Process
Package kernel-headers-2.6.18-194.el5.i386 already installed and latest version Nothing to do
[root@oracle yum.repos.d] # yum install oracle-validated
Loaded plugins: security
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package oracle-validated.i386 0:1.0.0-22.el5 set to be updated
--> Processing Dependency: libXp for package: oracle-validated
--> Processing Dependency: libaio-devel for package: oracle-validated
--> Processing Dependency: unixODBC for package: oracle-validated
--> Processing Dependency: unixODBC-devel for package: oracle-validated
--> Processing Dependency: compat-db for package: oracle-validated
--> Running transaction check
---> Package compat-db.i386 0:4.2.52-5.1 set to be updated
---> Package libXp.i386 0:1.0.0-8.1.el5 set to be updated
---> Package libaio-devel.i386 0:0.3.106-5 set to be updated
---> Package unixODBC.i386 0:2.2.11-7.1 set to be updated
---> Package unixODBC-devel.i386 0:2.2.11-7.1 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
===============================================================================
Package Arch Version Repository Size
===============================================================================
Installing:
oracle-validated i386 1.0.0-22.el5 cd 15 k
Installing for dependencies:
compat-db i386 4.2.52-5.1 cd 1.7 M
libXp i386 1.0.0-8.1.el5 cd 22 k
libaio-devel i386 0.3.106-5 cd 12 k
unixODBC i386 2.2.11-7.1 cd 830 k
unixODBC-devel i386 2.2.11-7.1 cd 743 k
Transaction Summary
===============================================================================
Install 6 Package(s)
Upgrade 0 Package(s)
Total download size: 3.3 M
Is this ok [y/N]: y
Downloading Packages:
Total 165 MB/s | 3.3 MB 00:00
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : unixODBC 1/6
Installing : unixODBC-devel 2/6
Installing : libaio-devel 3/6
Installing : libXp 4/6
Installing : compat-db 5/6
Installing : oracle-validated 6/6
Installed:
oracle-validated.i386 0:1.0.0-22.el5
Dependency Installed:
compat-db.i386 0:4.2.52-5.1 libXp.i386 0:1.0.0-8.1.el5
libaio-devel.i386 0:0.3.106-5 unixODBC.i386 0:2.2.11-7.1
unixODBC-devel.i386 0:2.2.11-7.1
Complete!
[root@oracle yum.repos.d]#
Questions:
Before going to install oracle 10g on OEL 5.5 ,
Should i update following packages separately using yum or leave it ??
Oracle 10.2 for OEL 5 32bits
binutils-2.17.50.0.6-2.el5
compat-libstdc++-33-3.2.3-61
elfutils-libelf-0.125-3.el5
elfutils-libelf-devel-0.125
gcc-4.1.1-52
gcc-c++-4.1.1-52
glibc-2.5-12
glibc-common-2.5-12
glibc-devel-2.5-12
glibc-headers-2.5-12
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.1-52
libstdc++-4.1.1
libstdc++-devel-4.1.1-52.e15
make-3.81-1.1
sysstat-7.0.0
unixODBC-2.2.11
unixODBC-devel-2.2.11
>> I tried to update above packages , but getting error >>
[root@oracle yum.repos.d]# yum update binutils-2.17.50.0.6-2.el5
Loaded plugins: security
Skipping security plugin, no data
Setting up Update Process
No Match for argument: binutils-2.17.50.0.6-2.el5
No package binutils-2.17.50.0.6-2.el5 available.
No Packages marked for Update
Thanks in advance ..@ Pradeepcmst
First my sorry for late reply. Still we did NOT start 10g r2 installation on OEL 5.5.
Please have a look ,if we missed anything , kindly forward it.
I have received some warning messages (when executing oracle-validated command ) and separately we did NOT use update command using yum.
Ex
# yum <package_name>
- Is this necessary before issue following command => # yum install oracle-validated.
>> What we did - I am pasting here >>
# cd /etc/yum.repos.d
# vi cd.repo
[cd]
name=CD
baseurl=file:///mnt/Server
enabled=1
gpgcheck=0
skip_if_unavailable=True
# wget http://public-yum.oracle.com/public-yum-el5.repo
--2013-10-15 13:04:22-- http://public-yum.oracle.com/public-yum-el5.repo
Resolving public-yum.oracle.com... 124.124.252.19, 124.124.252.16
Connecting to public-yum.oracle.com|124.124.252.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4307 (4.2K) [text/plain]
Saving to: `public-yum-el5.repo'
100%[==================================================>] 4,307 --.-K/s in 0s
2013-10-15 13:04:29 (134 MB/s) - `public-yum-el5.repo' saved [4307/4307]
[root@oel5 yum.repos.d]# yum install oracle-validated
Loaded plugins: security
el5_latest | 1.4 kB 00:00
el5_latest/primary | 14 MB 08:27
el5_latest 10433/10433
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package oracle-validated.i386 0:1.1.0-18.el5 set to be updated
--> Processing Dependency: util-linux >= 2.13-0.52.0.1.el5_4.1 for package: oracle-validated
--> Processing Dependency: irqbalance >= 2:0.55-16 for package: oracle-validated
--> Processing Dependency: kernel-uek >= 2.6.32 for package: oracle-validated
--> Processing Dependency: oraclelinux-release for package: oracle-validated
--> Processing Dependency: libaio-devel for package: oracle-validated
--> Processing Dependency: libXp for package: oracle-validated
--> Running transaction check
---> Package irqbalance.i386 2:0.55-17.el5 set to be updated
---> Package kernel-uek.i686 0:2.6.32-400.33.1.el5uek set to be updated
--> Processing Dependency: kernel-firmware = 2.6.32-400.33.1.el5uek for package: kernel-uek
--> Processing Dependency: device-mapper-multipath >= 0.4.9-23.0.1.el5 for package: kernel-uek
--> Processing Dependency: kexec-tools >= 1.102pre-96.1.1.el5_5.2 for package: kernel-uek
--> Processing Dependency: mkinitrd >= 5.1.19.6-75.0.5 for package: kernel-uek
--> Processing Dependency: ql2xxx-firmware for package: kernel-uek
---> Package libXp.i386 0:1.0.0-8.1.el5 set to be updated
---> Package libaio-devel.i386 0:0.3.106-5 set to be updated
---> Package oraclelinux-release.i386 0:5-10.0.2 set to be updated
---> Package util-linux.i386 0:2.13-0.59.0.2.el5_8 set to be updated
--> Running transaction check
---> Package device-mapper-multipath.i386 0:0.4.9-64.0.6.el5 set to be updated
--> Processing Dependency: kpartx = 0.4.9-64.0.6.el5 for package: device-mapper-multipath
--> Processing Dependency: device-mapper-multipath-libs = 0.4.9-64.0.6.el5 for package: device-mapper-multipath
--> Processing Dependency: libmpathpersist.so.0 for package: device-mapper-multipath
--> Processing Dependency: libmultipath.so for package: device-mapper-multipath
---> Package kernel-uek-firmware.noarch 0:2.6.32-400.33.1.el5uek set to be updated
---> Package kexec-tools.i386 0:2.0.3-4.0.4.el5 set to be updated
--> Processing Dependency: mkinitrd = 5.1.19.6-61.0.1 for package: libbdevid-python
---> Package mkinitrd.i386 0:5.1.19.6-81.0.2.el5_10 set to be updated
--> Processing Dependency: nash = 5.1.19.6-81.0.2.el5_10 for package: mkinitrd
--> Processing Dependency: e2fsprogs >= 1.39-36 for package: mkinitrd
--> Processing Dependency: iscsi-initiator-utils for package: mkinitrd
---> Package ql2xxx-firmware.noarch 0:1.01.01-0.5.el5 set to be updated
--> Running transaction check
---> Package device-mapper-multipath-libs.i386 0:0.4.9-64.0.6.el5 set to be updated
---> Package e2fsprogs.i386 0:1.39-36.0.1.el5_9 set to be updated
--> Processing Dependency: e2fsprogs-libs = 1.39-36.0.1.el5_9 for package: e2fsprogs
---> Package iscsi-initiator-utils.i386 0:6.2.0.872-16.0.1.el5 set to be updated
---> Package kpartx.i386 0:0.4.9-64.0.6.el5 set to be updated
---> Package libbdevid-python.i386 0:5.1.19.6-81.0.2.el5_10 set to be updated
---> Package nash.i386 0:5.1.19.6-81.0.2.el5_10 set to be updated
--> Running transaction check
--> Processing Dependency: e2fsprogs-libs = 1.39-23.el5 for package: e2fsprogs-devel
---> Package e2fsprogs-libs.i386 0:1.39-36.0.1.el5_9 set to be updated
--> Running transaction check
---> Package e2fsprogs-devel.i386 0:1.39-36.0.1.el5_9 set to be updated
--> Processing Conflict: kernel-uek conflicts udev < 095-14.27.0.1.el5_7.1
--> Restarting Dependency Resolution with new changes.
--> Running transaction check
---> Package udev.i386 0:095-14.29.0.2.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
==================================================================================================================
Package Arch Version Repository Size
==================================================================================================================
Installing:
oracle-validated i386 1.1.0-18.el5 el5_latest 19 k
Updating:
udev i386 095-14.29.0.2.el5 el5_latest 2.4 M
Installing for dependencies:
device-mapper-multipath-libs i386 0.4.9-64.0.6.el5 el5_latest 197 k
iscsi-initiator-utils i386 6.2.0.872-16.0.1.el5 el5_latest 1.0 M
kernel-uek i686 2.6.32-400.33.1.el5uek el5_latest 24 M
kernel-uek-firmware noarch 2.6.32-400.33.1.el5uek el5_latest 3.8 M
libXp i386 1.0.0-8.1.el5 el5_latest 22 k
libaio-devel i386 0.3.106-5 el5_latest 12 k
oraclelinux-release i386 5-10.0.2 el5_latest 3.0 k
ql2xxx-firmware noarch 1.01.01-0.5.el5 el5_latest 459 k
Updating for dependencies:
device-mapper-multipath i386 0.4.9-64.0.6.el5 el5_latest 122 k
e2fsprogs i386 1.39-36.0.1.el5_9 el5_latest 832 k
e2fsprogs-devel i386 1.39-36.0.1.el5_9 el5_latest 576 k
e2fsprogs-libs i386 1.39-36.0.1.el5_9 el5_latest 120 k
irqbalance i386 2:0.55-17.el5 el5_latest 21 k
kexec-tools i386 2.0.3-4.0.4.el5 el5_latest 507 k
kpartx i386 0.4.9-64.0.6.el5 el5_latest 465 k
libbdevid-python i386 5.1.19.6-81.0.2.el5_10 el5_latest 69 k
mkinitrd i386 5.1.19.6-81.0.2.el5_10 el5_latest 488 k
nash i386 5.1.19.6-81.0.2.el5_10 el5_latest 1.4 M
util-linux i386 2.13-0.59.0.2.el5_8 el5_latest 1.9 M
Transaction Summary
==================================================================================================================
Install 9 Package(s)
Upgrade 12 Package(s)
Total download size: 38 M
Is this ok [y/N]:
Downloading Packages:
(1/21): oraclelinux-release-5-10.0.2.i386.rpm | 3.0 kB 00:00
(2/21): libaio-devel-0.3.106-5.i386.rpm | 12 kB 00:00
(3/21): oracle-validated-1.1.0-18.el5.i386.rpm | 19 kB 00:00
(4/21): irqbalance-0.55-17.el5.i386.rpm | 21 kB 00:00
(5/21): libXp-1.0.0-8.1.el5.i386.rpm | 22 kB 00:00
(6/21): libbdevid-python-5.1.19.6-81.0.2.el5_10.i386.rpm | 69 kB 00:00
(7/21): e2fsprogs-libs-1.39-36.0.1.el5_9.i386.rpm | 120 kB 00:05
(8/21): device-mapper-multipath-0.4.9-64.0.6.el5.i386.rpm | 122 kB 00:05
(9/21): device-mapper-multipath-libs-0.4.9-64.0.6.el5.i386.rpm | 197 kB 00:13
(10/21): ql2xxx-firmware-1.01.01-0.5.el5.noarch.rpm | 459 kB 00:30
(11/21): kpartx-0.4.9-64.0.6.el5.i386.rpm | 465 kB 00:39
(12/21): mkinitrd-5.1.19.6-81.0.2.el5_10.i386.rpm | 488 kB 00:26
(13/21): kexec-tools-2.0.3-4.0.4.el5.i386.rpm | 507 kB 00:14
(14/21): e2fsprogs-devel-1.39-36.0.1.el5_9.i386.rpm | 576 kB 00:16
(15/21): e2fsprogs-1.39-36.0.1.el5_9.i386.rpm | 832 kB 00:25
(16/21): iscsi-initiator-utils-6.2.0.872-16.0.1.el5.i386.rpm | 1.0 MB 00:30
(17/21): nash-5.1.19.6-81.0.2.el5_10.i386.rpm | 1.4 MB 00:42
(18/21): util-linux-2.13-0.59.0.2.el5_8.i386.rpm | 1.9 MB 02:10
(19/21): udev-095-14.29.0.2.el5.i386.rpm | 2.4 MB 02:43
(20/21): kernel-uek-firmware-2.6.32-400.33.1.el5uek.noarch.rpm | 3.8 MB 04:51
21/21): kernel-uek-2.6.32-400.33.1.el5 (97%) 96% [===========================- ] 13 kB/s | 23 MB 01:09 ETA
(21/21): kernel-uek-2.6.32-400.33.1.el5uek.i686.rpm | 24 MB 28:57
Total 15 kB/s | 38 MB 43:58
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 1e5e0159
el5_latest/gpgkey | 1.4 kB 00:00
Importing GPG key 0x1E5E0159 "Oracle OSS group (Open Source Software group) <[email protected]>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : e2fsprogs-libs 1/33
error: failed to stat /mnt/hgfs: No such file or directory
Updating : e2fsprogs 2/33
Updating : udev 3/33
Updating : util-linux 4/33
warning: /etc/pam.d/login saved as /etc/pam.d/login.rpmsave
Updating : kpartx 5/33
Installing : libXp 6/33
Updating : kexec-tools 7/33
Installing : iscsi-initiator-utils 8/33
Updating : irqbalance 9/33
Installing : device-mapper-multipath-libs 10/33
Updating : device-mapper-multipath 11/33
Installing : oraclelinux-release 12/33
Installing : ql2xxx-firmware 13/33
Updating : nash 14/33
Installing : kernel-uek-firmware 15/33
Installing : libaio-devel 16/33
Updating : e2fsprogs-devel 17/33
Updating : mkinitrd 18/33
Installing : kernel-uek 19/33
Updating : libbdevid-python 20/33
Installing : oracle-validated 21/33
Cleanup : e2fsprogs 22/33
Cleanup : mkinitrd 23/33
Cleanup : irqbalance 24/33
Cleanup : e2fsprogs-libs 25/33
Cleanup : device-mapper-multipath 26/33
Cleanup : libbdevid-python 27/33
Cleanup : udev 28/33
Cleanup : e2fsprogs-devel 29/33
Cleanup : kpartx 30/33
Cleanup : nash 31/33
Cleanup : kexec-tools 32/33
Cleanup : util-linux 33/33
Installed:
oracle-validated.i386 0:1.1.0-18.el5
Dependency Installed:
device-mapper-multipath-libs.i386 0:0.4.9-64.0.6.el5 iscsi-initiator-utils.i386 0:6.2.0.872-16.0.1.el5
kernel-uek.i686 0:2.6.32-400.33.1.el5uek kernel-uek-firmware.noarch 0:2.6.32-400.33.1.el5uek
libXp.i386 0:1.0.0-8.1.el5 libaio-devel.i386 0:0.3.106-5
oraclelinux-release.i386 0:5-10.0.2 ql2xxx-firmware.noarch 0:1.01.01-0.5.el5
Updated:
udev.i386 0:095-14.29.0.2.el5
Dependency Updated:
device-mapper-multipath.i386 0:0.4.9-64.0.6.el5 e2fsprogs.i386 0:1.39-36.0.1.el5_9
e2fsprogs-devel.i386 0:1.39-36.0.1.el5_9 e2fsprogs-libs.i386 0:1.39-36.0.1.el5_9
irqbalance.i386 2:0.55-17.el5 kexec-tools.i386 0:2.0.3-4.0.4.el5
kpartx.i386 0:0.4.9-64.0.6.el5 libbdevid-python.i386 0:5.1.19.6-81.0.2.el5_10
mkinitrd.i386 0:5.1.19.6-81.0.2.el5_10 nash.i386 0:5.1.19.6-81.0.2.el5_10
util-linux.i386 0:2.13-0.59.0.2.el5_8
Complete!
[root@oel5 yum.repos.d]#
[root@oel5 yum.repos.d]# rpm -qa |grep oracle-valid
oracle-validated-1.1.0-18.el5
Thnaks .. -
LMS 2.6 / RME 4.0.6 : Update device packages
Hi All,
I want update device packages for the device Unknow c3560v2 and ME2400 on ciscoworks lms 2.6.
CCS= version 3.0.6
CM= version 4.0.10
CV = 6.1.5
DFM = 2.0.7
IPM = 2.6.0
RME = 4.0.6
The server doesn't have access internet so i downloaded files and copy this on directory psu.
1) I've tried directely upgrading the device package in RME, but it failed. He want file mdf v1.22 and the version is V1.20.
2) I've upgrading CiscoView for device, it's ok
3) I've upgrading Campus Manager with version 4.0.13, it's ok
4) I've tried upgrading the device package in RME, but it failed. He want file mdf v1.27 and the version is V1.25 after upgrade Campus.
I don't find on site cisco the version 1.27 of mdf, where i can found this file ?
I have the version 1.56 but it's compatible for LMS 2.6 and RME 4.0.6 ?
How can uninstall a version of mdf if I have a problem with this version?
thanksIndeed. It does look like the only MDF available is 1.52 for CS 3.0
I also saw the note:
You must install Campus Manager 4.0.13 and MDF 1.27 before installing CMDeviceUpdates 2.0.
RME 4.0.6 Release Notes
FYI. LMS 2.6 is EOL. As such I suggest you contact your account team to see if they can acquire it for you.
Thanks. -
Update a package in unsupported
This might sound like a stupid question but how do I update a package I previously submitted to unsupported? Am I supposed to delete the out of date package first or is there a nifty script available for it?
Cheers.Just re-submit it with the same name.
-
How do I update/install packages from a CD?
Hello,
I am new to Arch Linux. Kindly excuse me if this task is very trivial. I have installed the base system and updated it using pacman -Syu. I also installed all the other software packages using pacman -S <packagename>. Now I want to burn a CD containing all these updates and packages so that I can make a similar installation later on other systems which are not connected to the internet. I am not able to figure out how this can be done.
I need to upgrade the system and install all the packages I have on the CD by giving minimum number of commands at the command line. This helps me install Arch Linux on a large number of machines in a very short time.
Thanks for your help.If you're talking about batch installing packages, the method you suggested
will work for every package in the current directory. -
[SOLVED] yaourt how to update aur packages
Hi!
I got a quick question. I thought that yaourt is able to update old packages installed from Aur automatically.
So for example I type as usually yaourt -Syu --aur but I noticed it doesn't show AUR packages I can update. Only from core/extra/community
For example I just typed:
yaourt yaourt
1 aur/yaourt 0.9.2.6-1 [0.9.2.5-1 installed] (2406)
and see that I can update yaourt. I have other packages installed from AUR, how do I know that a newer version is available without checking it manually?
edit:
so I am happy to mark it as solved. It wasn't a bug, but it is a way how yaourt works.
yaourt -Syu --aur shows packages from core/extra/community.
If I press Y (to install them). It shows a list again with the information how much to download and install and then after pressing "No" to install them, yaourt continues to check AUR packages in this case.
Julien MISCHKOWITZ, the developer said he could change the behavior
Thanks everyone for the attention!
Last edited by ngsupb (2009-08-21 13:15:09)shining wrote:yaourt has a bug tracker : http://bugs.archlinux.fr/index/proj3?or … &sort=desc
Thank you shining. I have opened a ticket there. Lets wait, I hope they can help! -
How can I update my package in AUR?
I added PKGBUILD in AUR. Now I want to update it, but I can't find this option in aur-panel
INCSlayer wrote:you simply submit it like you would when you normally upload a package and it will update the package automatically
It works, thanx -
Hi,
I updated three SL servers to 10.6.7 and now install.log in all three systems are filled with an error message "Package Authoring: my.result.title and my.result.message not defined or empty". And when checking for new software updates using Server Admin - Server Updates the following error also written into the install log file: Software Update[]: Can't load distribution from (null): Error Domain=NSURLErrorDomain Code=-1000 UserInfo=0x1001805d0 "bad URL" Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1000 UserInfo=0x100637640 "bad URL")
Has anybody seen this before?
Searching for ideas to fix this problem.
Best Regards, HeimoOn one of my MacMini Server 10.6.7
I'm also seeing a string of these entries in my machines.
5/17/11 5:59:25 AM Software Update[30234] Package Authoring: my.result.title and my.result.message not defined or empty
Typically I get about 25 of them in a block and then
5/17/11 5:59:28 AM com.apple.launchd[1] (com.apple.suhelperd[30235]) Exited with exit code: 2
All in about 10 seconds.
This happens once a day at about the same time...
This is a not so busy MacMini Server that is providing Software Updates to clients ...
I also appear to see this on the client side of a SnowLeopard Clients....
so perhaps it is not a server error at all... But it does appear to be Software Update related.... In my case, I have an internal, local Software Update Server. -
Generate every hour event 2331 for each DP after Software update Deployment Package deletion
We have an organization build on SCCM 2012 R2 with 270 DPs configured with DP Pulls function. The centralized point contains DP sources available for all DP Pull.
We have some problems with Windows Update deployment package, and we decide to delete them. We first remove them from all DPs. After more than a month we delete the deployment package. From this day, we see that the SMS_Distribution_Manager service generate
every hour logs for contacting each of the 270 DPs to ask them for deleting the package.
Remark: At the time we run the delete, some of the DPs were not connected. After 3 weeks all of them were connected. A month later, the SMS_Distribution_Manager
generate always these events every hour.
Each DP responds with a 2331 event that seems OK. Every hour the system begin with two events (2301 and then 2300 for this package, after a 2331 for each
DP). All these events are also present in the application log of the Event Viewer. After the last DP connection that respond with 2331 event, there are no event that generalize a task for the package to definitively remove it from the database.
Could anyone help me to correct the system?There are no error messages. There are only messages generated in Distribution_manager logs and Event Viewer, showing us server processing and network activity on package that was deleted over 40 days, and that happened every hours. The Microsoft support
give us directives to delete orphan records in 4 tables
pkgServers_L,pkgServers_G,PkgStatus_L,PkgStatus_G)
At this time the correction has positive effect.
A sample of event generated
Log Name: Application
Source: SMS Server
Date: 26.02.2014 09:56:19
Event ID: 2331
Task Category: SMS_DISTRIBUTION_MANAGER
Level: Information
Keywords: Classic
User: N/A
Computer: wwww.xxxx.yyyy.zzz
Description:
On 26.02.2014 09:56:19, component SMS_DISTRIBUTION_MANAGER on computer wwww.xxxx.yyyy.zzz reported: Distribution Manager successfully removed package "PS100066" from distribution point "["Display=\\aaa.bbb.ccc.dddd\"]MSWNET:["SMS_SITE=xxx"]\\aaa.bbb.ccc.dddd\".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SMS Server" />
<EventID Qualifiers="16384">2331</EventID>
<Level>4</Level>
<Task>12</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-26T08:56:19.000000000Z" />
<EventRecordID>825362</EventRecordID>
<Channel>Application</Channel>
<Computer>wwww.xxxx.yyyy.zzz</Computer>
<Security />
</System>
<EventData>
<Data>PS100066</Data>
<Data>["Display=\\aaa.bbb.ccc.dddd\"]MSWNET:["SMS_SITE=PS1"]\\aaa.bbb.ccc.dddd\</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>On 26.02.2014 09:56:19, component SMS_DISTRIBUTION_MANAGER on computer wwww.xxxx.yyyy.zzz reported: </Data>
<Data>
</Data>
</EventData>
</Event>
Regards -
Update existing package - naming convention/workflow questions
OK, so we have an existing package:
Adobe_CS6_MasterCollection_en_US_20120910_Install.pkg
Fast forward 1 month...
We now want to update the package so it has latest patches and so it is also renamed:
Adobe_CS6_MasterCollection_en_US_20121010_Install.pkg
How do we do this with AAMEE 3.1...there doesn't seem to be an opportuntity to rename the package.
Is it safe to simply rename the package before we begin to update it? Or can/should we rename it after we have updated it?
And what do we rename...just the *.aamee file? Or do we also need to rename the existing packge that we are updating? Before or after?
Lots of questions....
Our goal/intent is to be able to provide monthly or quarterly updates...this would require our naming convention to show correct date on the package.
Thanks,
DonHi,
I understand your problem about maintining the AAMEE packages without renaming them. May be a low cost solution for you right now is to add 1 more level of folder structure where you dont rename the AAMEE packages (and AAMEE package folder name) but rename its parent folder.So if you have an X.pkg made inside X folder on mac, keep this X folder inside Y folder. And you can change this Y manually after successfully updating the package to reflect current status. Doing this, you you are actually changing the path where the AAMEE package is kept on your machine but not the package itself. So you can keep modifying the current package and still maintain the version information.
I completely agree with rahul that the ability to rename the AAMEE package after modifying it is a good utility, but right now this solution may help you in maintainence.
Thanks,
Saransh Katariya | Adobe Systems | [email protected] -
Revision: 7653
Author: [email protected]
Date: 2009-06-08 15:07:23 -0700 (Mon, 08 Jun 2009)
Log Message:
updating the package target to include the new jar.
QE Notes: None.
Doc Notes: None.
tests: checkintests
Modified Paths:
flex/sdk/branches/3.x/build.xmlHi,
I did this but it is given an error due to return table so i copy the routine from 3.x and copy in BI 7 start routine, now it is given an error
E:Within classes and interfaces, you can only use "TYPE" to refer to ABAP Dictionary types, not "LIKE" or "STRUCTURE".
Could you please help me.
Thanks -
Revision: 8210
Author: [email protected]
Date: 2009-06-24 16:15:50 -0700 (Wed, 24 Jun 2009)
Log Message:
Update source package target to remove some build artifacts that were being pickup
Modified Paths:
blazeds/trunk/build.xmlFirst, I agree with Karol, use the AUR so that pacman can do its job. Second, when you do your make, there is no reason to run it as root (until you do the make install) For the initial build, it is much safer to not use root; plus all the files in your home directory will continue to belong to use, not to root.
But, try the AUR.
Maybe you are looking for
-
I have an HP Laserjet P2015d which I bought specifically for the full (automatic) duplexing feature. This feature no longer seems to work under Windows 7 and I am beyond frustrated. I have tried several drivers and nothing seems to work. I have tried
-
i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great! When I reboot fro
-
Can't Rename Group in Pivottable (Excel 2010)
Hi, I have a pivottable with the names of our company's resellers for 2013. Due to some errors in our booking routines, some resellers have different names but are actually the same reseller. So in the pivottable that sums revenue per reseller, I try
-
HELP!! How do I create hyperlink in a text field?
Hi! I've been going through the message boards and I am not finding my answer. I have created a form utilizing LiveCycle. I have made the form so that it can be fillable via Reader Extended PDF. I need to be able to put a link in a text field that
-
Error message:ORA:12560:TN:protacol adapter
Hi everyone I Installed Oracle9i on XP.when I try to logo(SQL Plus) using Scott/tiger.It's giving error message:ORA:12560:TN:protacol adapter. Pls help me to solve this problem.I have to work on this.