Mant. orders, Capacity load and material shortage messages on IP10 and IP30

Hi Experts,
In customizing, If we have marked on capacity and material checks for planned work orders (Order type PM02) and maintained the finite scheduling check in work center then system only shows capacity overload message while scheduling on IP10, doesn't show any message for material shortage and finally system show both messages on work order level when we try to release that order.
On other end system doesn't show any message (capacity overload and material shortage messages) while scheduling by IP30 (Deadline monitoring) and show the same behavior as discussed above upon release.
Can anybody tell me how would I show the above missing messages on IP10 and IP30?
After creation of maintenance orders system maintaining the system status NTUP (dates are not updated) what does it meant?
Regards,

Have a look at OIOI transaction for "order create" status and make sure to select the "check material on save" check-box for Material availability to be triggered on save.
NTUP means that the dates haven't been updated (Scheduling hasn't been done for the order).Make sure to select Automatic scheduling check box for the plant and order type in transaction OPU7 if you would like scheduling to be performed automatically on Save of the order.
Regards
Narasimhan

Similar Messages

  • Confirming the order with material shortage

    Dear all,
    I am confirming the process order even though if material shortage.
    Again when will consumption will take place for that particluar material?
    Where that stock will be located without consumption?
    Regards
    Rajasekaran

    Hi Rajasekaran,
      stock is not present than it will go to cogi .please check the cogi.
    if you don't want incorrect goods movement than choose following field as ticked in opk4 conformation dependent parameter
    Thanks&Regards
    Sandeep Kumar Praharaj

  • Material shortage ( soft or hard error ) while releasing production order?

    Hi Guys
    I  am a SAP tech guy wrote a BDC program to release production order. It worked fine in one enviroment but not working another enviroment saying ..Material shortage.
    My BDC program can't afford any hard errors in the process. The execution stop abruptly for any hard error.
    How to change that Material shortage from hard error to soft error or any info message.
    Any ideas? any thing to do with material master or spro?
    Thanks
    Hari

    Hi
    You can make settings in SPRO, so that the material availability check will not restrict you to go further...
    follow the path:
    SPRO>Production->Shop floor control>Operations->Availability Check-->Scope of check
    There you will find the settings for order creation and release (1 & 2)..
    You have remove the restriction there.
    Regards
    Bala

  • Sales order schedule confirmed date will consider Production capacity load

    As we know about schedule confirm delivery dates of sales order will consider based on material master lead time ,shiping point etc
    How to consider production capacity plan on sales order's delivery date.
    Say for example :
    Production workcenter capacity to produce the XYZ material 10qty in a Day.
    today i have created the sales order XYZ materail qty of 100. lead days has give based of MMR 21 days 17-07-2010( 3 sundays)
    and in same day i have created other sales order XYZ material qty 5000 ,the lead days again it will came 17-07-2010.
    Now my client requiremnt is when the schedule days is confirming in the sale order it sholud also consider the production capacity planning also(CR01,CR02)
    Even though my work centers are overloaded it is confirming the sales order on 17-07-2010 (based on leads days in MMR)
    Need your Inputs on issue

    Hi,
    This is a complex issue; best solution is by using APO/GATP.
    If not, then in ERP only, the second best is:
    1) Work with assembly processing in SO, meaning that a production/planned order is automatically created in the customer order during order creation.
    2) Then, after the order is created it is scheduled, and the delivery date proposal is based on that.
    3) Now you can check in the order that there are no capacity overloads, and all capacity required to produce on the proposed date is available. If yes, you're done. If not, it gets a bit complex, since you actualy need to switch to capacity planning, do capacity leveling and dispatch (PP), and the you get a new feasible schedule proposal based on that.
    APO/GATP could do all that automatically!
    Regards,
    Mario

  • My system is Mac OSX 10.5.8 and your info says it should support the download of Firefox, but when it loads, I get a message that it's not supported by my system.

    Mac OSX 10.5.8 is a PowerPC computer. Your info says it should support a Firefox browser & I REALLY want one since I always liked Firefox better than Safari, but I get the message saying that my system doesn't support Firefox.
    I'd be happy to purchase a disc in order to load the Firefox software. Thanks.

    Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher
    *System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
    The good news is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. The bad news is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
    *System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
    *Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
    *Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
    You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
    *Home page: http://www.floodgap.com/software/tenfourfox/
    *Developer's blog: http://tenfourfox.blogspot.com/
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

    Hi,
    Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
    This load is getting failed every day. It is a full load and records are getting transferered and added.
    when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
    Version i am using is BW 3.5
    Please let me know what will be the problem???
    Thanks,
    Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

    First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
    Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
    You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
    Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
    In the opened popup click on the tab 'Chain'.
    In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
    1. copy the variant from the popup to the variante of table rspcprocesslog
    2. copy the instance from the popup to the instance of table rspcprocesslog
    3. copy the start date from the popup to the batchdate of table rspcprocesslog
    Press F8 to display the entries of table rspcprocesslog.
    Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
    Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
    1. rspcprocesslog-log_id -> i_logid
    2. rspcprocesslog-type -> i_type
    3. rspcprocesslog-variante -> i_variant
    4. rspcprocesslog-instance -> i_instance
    5. enter 'G' for parameter i_state (sets the status to green).
    Now press F8 to run the fm.
    Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

  • Is it possible to release Process Order  with Material Shortage

    Hi All,
    We are using PP-PI & still wants to have behavior of the PP prod order
    i.e. Release Process Order with Material shortage.
    Is it Possible.
    Regards,
    Jatin

    Hi Jatin,
    Go to Transaction OPJK. Select your Plant, order type and Business function as 2-Check availability during order release.
    Under Material Availability tab, maintain '1- User decides on release if parts are missing' if user wants to decide for release of Process order or '2-Release permitted despite missing parts' if you want directly the Process order should be released despite of shortage in Release material field.
    These settings are similar to PP.
    Please check and revert.
    Regards,
    Hiren Ramani

  • Planned order capacity requirement load on holiday

    Hi ,
    We have some cases , the planned order capacity requirements be load at weekend (holiday), but we have no same issue for process order , that's means the resouce set up is correct.
    Is any customizing related with planned order capcaity requirment ?
    Thanks !

    Hi,
    If you select the Workday indicator  = 1 (Working days (overrides factory calendar) at "Interval of available Capacity Screen" of Workcenter screen system will schedule the  Order during the Holiday.(CA02)
    This is applicable for Both Planned Order and Process Order.
    Pradeep

  • After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

    After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
    == This happened ==
    Every time Firefox opened
    == FF updated to 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • ITunes Store Not Loading with no error message and have gone through all online support procedures

    Hi I am trying to conect to the iTunes store here in NJ via my laptop and my school's Wifi network, but nothing ever happens...
    I click on the iTunes store button and it comes up with the loading bar at the top of the screen where the song time marker would be, but nothing ever happens. It just loads and loads and loads, I don't even get an error message...
    I have followed all the iTunes online support procedures for trying to reslove the issue including: reinstalling iTunes, wiping the ipconfig cache from the run dialogue box, adding iTunes to the firewall "allow" list, and even running the iTunes diagnostic for store connectivity. The diagnostic comes back saying that everything is fine but that iTunes cannot make a secure connection to the store, when I try to follow the help button from the diagnostic, iTunes tells me that it cannot connect to the internet and to make sure that my computer has all network cables plugged in etc. but obviously that is not the issue, or I wouldn't be able to be online to post this message...
    I know that it has nothing to do with my campus' network, because I am able to view the iTunes store via my iPhone 3GS on the same network.
    I am using a Dell Precision M6300 with an intel Centrino Duo and Windows XP service pack 3.
    HELP!!!!!
    -Duncan-

    I click on the iTunes store button and it comes up with the loading bar at the top of the screen where the song time marker would be, but nothing ever happens. It just loads and loads and loads, I don't even get an error message...
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I'm downloading adobe software via my dad's account and when it's done loading, it has a message where it says it sent a verification email to my email address, but when I check it shows that it hasn't been set.  I keep clicking the resend email and it cl

    I'm downloading adobe software via my dad's account and when it's done loading, it has a message where it says it sent a verification email to my email address, but when I check it shows that it hasn't been set.  I keep clicking the resend email and it claims it does but it still hasn't sent the email to my address.  How do I fix this?

    It is probabl,y sending the email to your Dad's email address if you are using his account.

  • Safari won't load and I can't update my software, ie., I get an error message.  What can I do to fix this?

    Safari won't load and I can't update my software, ie., I get an error message.  What can I do to fix this?

    You can't install Safari 3 on your 10.3.9 OS.
    You must use the DVD installer to re-install the older version of Safari found on it.
    You can update your operating system buy purchasing Tiger (10.4) and get a more modern version of Safari.

  • Firefox is slow to load and view pages and repeated "Firefox is not responding" message

    Firefox is quite slow to load and view pages with and I keep getting the "Firefox is not responding" message.
    I have the latest version, plus the latest Adobe Flash Player, Shockwave Player, etc.

    Note that Firefox 36 has been released officially.
    *https://www.mozilla.org/en-US/firefox/36.0/releasenotes/
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks

    sandrafromsilver spring wrote:
    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks
    Go to the following link:
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

  • I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    Same issue here,  previously did work perfectly

Maybe you are looking for