Manual and Statistical Indicator in Pricing

Hi
What is the significance of Manual and Statistical Indicator in Pricing.
Regards

Hi,
Statistical key
This indicator causes a surchage or discount to be set in the document statistically (that is, without altering the value).
If you tick statistical key then that will not be consider while calculating net price.
For Eg: You have created one Purchase Order the PB00 gross price is 1000 and the discount is 50. Then this Discount part will not taken into FI account.
Regarding Manual
If a condiiton type is marked "Manual" in Pricing that will not get proposed automatically in PO condiitons, you have to manully select the condiiton from F4 help and maintain the value against it untill you maintain condiiton record for the same.
You can see in Pricing procedure there are two condition types PB00 (Autoamtic) & PBXX (Manual & doesnot contains any Access Sequence)
If you check the manual box against PBXX then you have to enter the condition manually in po. It will not populate auto.
Reg,
Ashok
Rewards welcome

Similar Messages

Statistical indicator in Pricing schema.

All,
Can anyone explain the relevance of 'statistical ' indicator in pricing schema in simple terms with some examples ?
regards

Hi Sandeep
Consider this:
PBXX 100.00
RB00Discount 5.00
If you have above in PO conditions, the price in item overview will be 95.00 (100-5.00) which is net price.
If RB00 above is statistical in pricing schema, then the net price would have been 100.00
It works similar way for surcharges also (surcharge increase netprice while discounts reduce it when compared to your basic price)
You can also use it in quotations to define dummy conditions for loading to calculate landing cost without really affecting the price given to vendor.
Best regards
Ramki

Statistical Indicator check in MM pricing.

I have not put a statistical indicator in MM pricing still.The condition shows as statistical.Can you help me to find how this statistical indicator is autogenerated.

Remove the "Accruals" check box in the condition type configuration. If the condition type itself is flagged as "accrual" it will appear statistical.
Edited by: Matthew Hiram Rose on Dec 14, 2010 11:58 PM

Manual and mandatory condition type??

Hi
What happens when you do not enter a value for a manual and mandatory condition type?
What are the difference between these two?

Manual:
This indicator specifies whether the specific condition type can be determined manually during sales order processing.
If we check the box then the entry is going to be manual, if we uncheck it, it is going to be automatic.
For Base Price and Taxes, the entry should be automatic.
For Discounts and Freights, The entry should be manual.
If we check the box, in VA01 when we go to conditions at the header/item level, the condition type will not be listed. If we require we will have to manually enter it.
If we uncheck the box, in VA01 when we go to conditions at the header/item level, the condition type will be listed.
Mandatory:
This indicator specifies that particular condition type is mandatory in the pricing procedure.
If we check the box, then in VA01 at the header/item level in the conditions tab, if we delete the value in the condition type and try to save the document then system will not allow us to do it and throws an error.
If we uncheck the box, then in VA01 at the header/item level in the conditions tab, if we delete the value in the condition type and try to save the document then system will allow us to save it, without giving any error.
Mandatory check box should be checked in condition types which are compulsorily required in pricing procedure. Ex.: PR00, MWST.
If the condition type is checked with mandatory option, then value should be maintained for that condition type, otherwise the system will not allow the user to process the document.
Hope it helps you.
Regards
AK
Please reward points if helpful

Build and Drop Indices for Info Cube

Hi,
How or Where can we Build Indices and Drop Indices on Info Cube?
Thanks & Best Regards,
Venkata.

Hi Venkata,
Although you can, you don't have to do it manually, you can add these process (drop index and build index) to the process chain where you load the InfoCube.
If you don't how pass me your email and I send a document.
regards,
Sebastián.-

Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

Any luck with the suggestions mentioned by Bob Timmons?
I am having pretty much the same issue.
Got a new modem Arris SB6141 and a new Airport Extreme ME918LL/A. Activated with my ISP (Comcast). Worked with a savy tech who knew the modem and Airport Extreme. Ensured all items were correct from the ISP side.
I follow the instructions as indicated for Airport Extreme by it fails to detect the internet and dns servers. Comcast suggested I call apple. Reading posts above I will:
-Reset the airport extreme
-Unplug the modem for 30min
Airport Utility 6.3.4 (634.17)
Airport Extreme ME918LL/A Firmware Version 7.7.3
MBP - Yosemite Mid 2012
Appreciate the assistance folks.

Significance and use of CVD indicator and MRP indicator in J1IEX

Dear Frndz...
Plz expln significance and use of CVD indicator and MRP indicator in J1IEX.
Regards,
Amit P Hiran
njoy SAP..
njoy Life...........

hi
>CVD TICk
CVD indicator will be auto ticked when when u go for IMPORT PROCESS
check folowing for import process
import process customization
>MRP TICk
MRP tick is used for the first stage dealer scenario ,where at time of purchase u cant have excise values
the bill will be including base price exciseothertax + delears commisiion
E.g.:
Material Price = 80/-
Excise Duty = 14/- (BEDECessSECess)
Margin = 6/-
Total =100/-
VAT @3% = 3/-
Grand Total =103/-
Step 1:
Create PO with Base Price as 100/- by selecting tax code which is having VAT as 3% (Total PO value will be 103/-)
Step 2:
Post MIGO and Capture Excise Part - 1
Click on More details icon in Excise tab (header), check MRP Indicator in miscellaneous tab, Enter Assessable value as 80 in Excise tab Item level and enter the excise values BED, ECess , SECess manually, check & save the document.
Step 3;
Post Excise Part 2 in J1IEX
Step 4:
Post MIRO by checking calculate tax, edit base value as 80/- enter the amount in header as proposed by the system (103/-), simulate & post the document.
Note 1104456 - Use of MRP indicator for capturing excise duties from dealer

Diff between manual dep statistical dep

hi friends
what is the difference between manual deprecaiton and statistical dep
could u pls explain

Hi Shiva
Statistical depreciation or derived depreciation will not post to GL account whereas many or real depreciation post to GL account.
Thanks
Ashok
Assign points for useful answer

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.

TS3992 I am unable to back up my ipod touch, I try and do it manually and it sits "Backing Up........." for a very long time, I have had it running all day and still going????? I am on the 5GB free plan, I have availabe 2.3GB

I am unable to back up my ipod touch, I try and do it manually and it sits on "Backing Up.........", it has been sitting on this all day. I am on the free 5GB plan, availabe storage is 2.3GB, any suggestions

Hello mig04,
While looking into the issue you are experiencing I came across some helpful information. In an article called iCloud: Troubleshooting creating backups found here: http://support.apple.com/kb/TS3992 there are a number of steps to help get your issue resolved.
General troubleshooting
General information
iCloud Backup requires a Wi-Fi connection to the Internet.
Automatic backups occur when you've plugged in your iOS device, locked the screen, and have connected it to Wi-Fi.
You can manually start a backup by tapping Back Up Now in Settings > iCloud > Storage & Backup (requires a Wi-Fi connection to the Internet).
iCloud Backup will provide helpful information and status messages related to backups at the bottom ofSettings > iCloud > Storage & Backup.
If automatic backups don't work as expected, test to see what happens when you start a manual backup by tapping Back Up Now at the bottom of the Storage & Backup screen.
Backups and restores both take time, especially if you have a lot of data or a slow connection. Depending on the size of your data and the speed of your network, you may need to give more time than you expected to a backup or restore.
Make sure you have at least 50 MB of free space available on your iOS device before you back up. If you have no space available on your device, iCloud Backup can fail in some cases. You can verify how much free space you have available on your iOS device in Settings > General > About.
Cheers,
Sterling

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that informat

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that information is not sufficiently detailed for me. I have tried several options, but I come now way. Generally it seems that your information is only for the ones who can, not for the people who can´t although it is we who really need to learn. Please give me a step by step (click by click) information on how I can get the ice above the flower and then make the ice partly transparent so the flower is seen underneath. Please send me an e-mail Erik Solbu [email protected]

Open a new document big enough for your image. Then additional open your ice and flower image as well. Copy each and paste it into your blank document. They will be placed on their own separate layers.
Make sure in your layers panel. (Bottom right) the ice is above the flower, by dragging it in place. In that same layers panel click the ice layer to select in and find the opacity meter above. Drag to the left until you get the effect you desire.

HT3180 My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

Unplug it from power, wait 10-15 seconds and plug it back in.
If it does not power up properly at that point, restore it via iTunes on the computer.

For the past few hours I have been trying to download ios 7.0.4 from itunes onto my iPhone after trying many times it would give me a error saying network failed! then i tried to download Ios 7.0.4 manually and then put it on but it keeps failing?

For the past few hours I have been trying to download ios 7.0.4 from itunes onto my iPhone after trying many times it would give me a error saying network failed! then i tried to download Ios 7.0.4 manually and then put it on but it keeps failing? i have tried everything that i have came across and nothing seems to work please help!

I venture to say you have a Windows PC.
If so, before beginning the download try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the insecure OS your computer is running.

Manual and Statistical Indicator in Pricing

Similar Messages

Maybe you are looking for