Manual bypass to view all history entries of all user for one report

Test have been performed on standealone BIP 10.1.3.4.1 (Patch 11931697). May be it can be reproduced with previous versions and/or other J2EE container.
Problem is now described in Oracle Support with bug ID : 12412334
Bypass solution may be helpful for people who use work directly in BIP web interface or who integrate this web interface using HTTP URLs or HTTP/REST like custom app (and may be other cases...)
When logged with an admin username, you can view OR filter "ALL" history of one all users for one report by typing an url like :
http://BIP/xmlpserver/servlet/reporthistory?report_url=/REPORT_DIR_PATH/XDO_NAME/XDO_NAME.xdo&tfilter=all
Where :
BIP is BIP Server DNS
REPORT_DIR_PATH is report directory path in BIP web interface
XDO_NAME is report's name

I don't think there is a way. There should be, but I've never seen it.

Similar Messages

Is there a way to view all favorites on one page from different albums?

is there a way to view all favorites on one page from different albums?
I can't seem to figure out how to view all favorites at one time.
nothing (thus far) is shared.
paid membership to revel, also.

oops - apparently you can do this from the app,
but not from the web login view.

How can i view all users?

Hi all.
i am using Oracle 10g.
How can i view all users?
Tanx
Alam

So if you can not get complete set of data you will take a subset (which can be empty, BTW) and say this is a complete list?In a 10.2.0.4 database a user with CONNECT role only can see every username. Can't see all the details but that's the intent of the view. I don't know if this is a doc bug or what.
And, it is, BTW, a very good thing DBA_USERS is not available to everyone. List of users is part of security and is at least confidential.Agree 100%. I just thought it was a bit odd for you to suggest that I RTFM the ALL_USERS definition, and point out that the docs state it's a list of users visible to the current user, when your suggestion to the OP was to use DBA_USERS. It's likely that a user with the ability to query DBA_USERS would have all users visible to them anyway. I just didn't understand your rather rude followup directed at me. I'm just trying to help, just like everyone else here.

How do I set Firefox to be usable for all users on one computer?

How do I set Firefox to be usable for all users on one computer?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

ITunes Shared library with all users on one computer

I am trying to share my iTunes (version 8.2) library with all the users on my computer. So far, this is what I have done:
1) I have moved the music folder into the shared folder.
2) I have selected "Add to Library" in all three accounts.
3) I have tried checking and unchecking the "Copy files to iTunes Music folder when adding to library."
Since then, I have added some CDs that had some songs that I already had. When I loaded these CDs, I deleted the duplicates that had the worse sound. Since then, everything is unwinding. The additions on one user account are not being added to the others. When I delete a track, iTunes (obviously) says that it can't find the song anymore. What's odd is that I then delete the one that is missing, and both are missing now: the one that I deleted on the original account and the one that I did not delete on the original account.
I am starting to think that I need to start from scratch. So, to make a long story short (too late), how can I share my iTunes library with all users on one computer, where I can make a change in one account that will update automatically on the other accounts. If it can't be updated automatically, how can I add/delete files without causing the headaches I am currently having?
Brian

I actually followed this, but I still had problems that I listed above. Is there any way that when you make changes to one account (even if there is only one main account where changes are made), the changes are automatically (or at least easily) applied to the other user accounts?

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

I have Final Cut Studio V1 - the PPC/Intel V5/5.1 cross-grade version, which would suit your requirements perfectly. (I have it for sale at present down here).
If you keep looking, you're sure to find a similar second hand copy in your area, without the need to upgrade your graphics card.
I'd go for Final Cut Pro as above over any version of Express. FCP has the full version of LiveType - not the truncated version that was released later on.

Function Module or table to read all EQUI for one KUNNR

Hello,
i need to read all Equipments for one specific KUNNR (endcustomer).
Is there a function module which could be used?
Or what is a good select for this?
Thanks a lot.
Kind regards
Manfred

Hi,
EQBS table will be getting updated based on the Delivery document or while creating equipment for Material & Serial no combination.
How you are maintaining End Customer in your Equipment Master?
You can maintain in Partner Function or Sort Field or through automatic equipment creation.
Based on that, you have to find the logic.
Regards,
Maheswaran.

How do you make Motion templates availabe for all users for FCPX?

How do you make Motion templates availabe for all users for FCPX?

Copy your Motion Templates folder that is in your Movies folder to the movies folder of your other users.

Can i delete all users in one go?

I am using SAP authentication. Afer defining my Entitlement system, under options i did not chose to Import users for the imported role.
But All users for the imported rloe are imported. i dont want all users. It is painful as well to delete each user at a time for 500 users. How can i delete all users in a sinlge go?
Please help
--Krish

This may ork: Try to set the Force user synchronization option under CMC->Authentication->SAP->Options and remove the role temporarily.
Such a behaviour can be xeplained only through the setting of the option Automatically import users under CMC->Authentication->SAP->Options . Even for a short period of time.
You MUST create a role that contains only the SAP users you want to accept in your BOBJ system and import this role in the CMC
Regards,
Stratos

Query: to view all users that have been created for access to a database

Hi,
Is there a command syntax that we could give to see all the users who have been created for access to a particular database. I want to view all the users that have been created using sql* plus.
can anyone help or is it impossible?
Thanks

This is for begging:
[email protected]> select grantee, privilege from dba_sys_privs where privilege like '%CREATE%SESSION%
2 /
GRANTEE PRIVILEGE
A CREATE SESSION
AA CREATE SESSION
U1 CREATE SESSION
U2 CREATE SESSION
BD1 CREATE SESSION
DBA CREATE SESSION
EMI CREATE SESSION
MOB CREATE SESSION
ODM CREATE SESSION
OHP CREATE SESSION
SEC CREATE SESSION
SYS CREATE SESSION
TU1 CREATE SESSION
TU2 CREATE SESSION
U01 CREATE SESSION
XDB CREATE SESSION
MOBI CREATE SESSION
OHP4 CREATE SESSION
PFAY CREATE SESSION
UD01 CREATE SESSION
UR01 CREATE SESSION
ADHOC CREATE SESSION
BATCH CREATE SESSION
DEBUG CREATE SESSION
DEV01 CREATE SESSION
HRAPP CREATE SESSION
MDSYS CREATE SESSION
MOBI2 CREATE SESSION
SKING CREATE SESSION
SPACE CREATE SESSION
UPASS CREATE SESSION
WKSYS CREATE SESSION
CTXSYS CREATE SESSION
ORDSYS CREATE SESSION
PRAC01 CREATE SESSION
RTABLE CREATE SESSION
CONNECT CREATE SESSION
Than you have to select also all the users that have granted roles with this privilege
this will give you the full set of users who can connect
Best Regards
Krystian Zieja / mob

Group Policy to Allow Non-Administrative Users to View All User Processes in Task Manager

Hi All:
Trying to get users with just Remote Services right (can remote in, no administrative permissions what-so-ever, to have the ability to view all processes by all users on the server.
I would like to do through group policy, however I cannot seem to find a policy doing just this. Any ideas?
2008 R2 Forest btw.

Hi,
Thank you for posting in Windows Server Forum.
The connection permissions that are set in Remote Desktop Session Host Configuration also determine the actions that a given user can perform in Remote Desktop Services Manager. For example, a user must have at least the Remote Control special access permission
to remotely control a user session by using Remote Desktop Services Manager.
Please check below article for details.
Configure Permissions for Remote Desktop Services Connections
http://technet.microsoft.com/en-us/library/cc753032.aspx
In regards to viewing process on RDSH server, can view the process in process Tab in RDSH manager.
Managing Users, Sessions, and Processes
http://technet.microsoft.com/en-us/library/cc732808.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Sharing library/playlists etc. All users on one computer STEP BY STEP guide

ok i recently installed a new hard drive and when I set up iTunes I found I needed to set up iTunes the way i used to have it... which was that all users shared the same library... and if one user added a song we all had it... without manually modifying anything... also playlists created by one would appear for others.
A scan of the forum caused me headaches and little help.
SO... a couple of hours palyng around and I am where i want to be!!!!
please note... save time and modify permissions at the correct stage... or it won't work!!!
Step By Step...
Go To...
Main users iTunes folder (iTunes Library, Album Artwork, iTunes Music Library.xml, iTunes Music)
AND... do a get info...
Under... Ownership & Permissions...
Change the group to admin and give this group 'read & write' and others the same or leave it at read only.
Hit the 'apply to enclosed items' button!!!
THEN... drag this folder to a shared location... IE Users / Shared.
THEN... make an alias and drag it back to the Music Folder in your own home library. (where the original folder was previously)!
DELETE the word ALIAS.
Log in as another user and get rid of the iTunes folder. (if the other user has different songs etc... then save them to a separate location for re-importing later!
Go to the Shared location... Make another Alias... drag it to the music folder and again DELETE the word ALIAS.
Do this for all users...
Any user who adds a song to iTunes... is shared by all.
Any user who creates a playlist... is shared by all.
One downside to this... if a user is logged in using iTunes and you switch users iTunes will not be available to the new user... unless the application is quitted...
G4 iMac 20 1.25ghz / G4 iBook 14 1.33ghz Mac OS X (10.4.9)

That steps above are far too much (and unecessary) work.
Drag the iTunes folder to a shared location.
Make sure all users have REad/Write permission to the iTunes fodler.
Each user start iTunes holding the Option key, select Choose existing library and pick the iTunes folder in the Shared folder.

How to diable delete button in PO for all users excepting one

Dear All
Please guide how to disable delete button in PO for all users excepting only one.
Thanks

Hi,
check following link
[Disable fields at item level in ME22N;
[Disable Delete Button;
Regards
Kailas Ugale

Adding all users under one subtree to a role

Hi,
We have a role call PaymentsGroup under cn=Groups,dc=companyname,dc=com
There are sub trees which contains many users which categorised by city, country.
Example :
cn=michael wood,ou=users,ou=cal,ou=us,ou=dept1,cn=users,dc=companyname,dc=com
cn=harry wilson,ou=users,ou=lon,ou=uk,ou=dept1,cn=users,dc=companyname,dc=com
Can we add the subtree (upper level) onto the group so all users under that subtree will get granted to the role?
Example : ou=users,ou=ny,ou=us,ou=dept1,cn=users,dc=companyname,dc=com
Thanks!

Hi,
To clarify, are you talking about the Role mechanism defined by DSEE as described at Managing Roles - Oracle Directory Server Enterprise Edition Administration Guide?
-Sylvain
When closing a thread as answered remember to mark the correct and helpful posts to make it easier for others to find them

Manual bypass to view all history entries of all user for one report

Similar Messages

Maybe you are looking for