Manual COI entries

Incase the COI entries has to be entered thru manual elimination entry of investment /equity do we need to maintain the accounting techniques at all?
Is the maintainence of accounting technique applicable for automated elimination only...

Accounting techniques impact the virtual cube's interpretation of the different posting levels.  I'm not sure what happens if they aren't maintained (I would guess BCS considers everything to be Purchase Method).
If you have Equity Method units that's you're manually booking a pickup for, you'd want to set the accounting techniques correctly in order to assure the PL00 & 10 are showing up in the reporting, and that no PL20 elimination entries are being included as well.
- Chris

Similar Messages

  • Excel Table with Data Connection Manual Text Entry Misaligned After Refresh

    Greetings!
    I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
    to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
    The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
    out of alignment with the row it's supposed to be associated with.
    Example
    Column 1(SP)
    Column 2(Extra)
    Row 1
    Item 1
    Row 2
    Item 2
    Text entered for Item 2
    Row 3
    Item 3
    Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
    Column 1(SP)
    Column 2(Extra)
    Row 1
    Item 1
    Row 2
    New Item 1.5
    Text entered for Item 2
    Row 3
    Item 2
    Row 4
    Item 3
    The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
    Any thoughts on what would cause this?
    Thanks in advance!

    Yes, it is. I realized after posting the first time, that I'd assigned the question to the Visio forum. I wasn't sure how to reassign to the correct (Excel) forum, so I re-posted over there:
    http://social.msdn.microsoft.com/Forums/en-US/b3bbe00c-94c0-48d4-bed9-fbd08d707b1d/excel-table-with-sharepoint-data-connection-manual-text-entry-misaligned-after-refresh?forum=exceldev

  • Manual journal entries created in Ap did not see in Accounts Payable Trial

    Hi Experts,
    Report Accounts Payables Trial Balance, with parameter Include SLA/Manuals/Other Sources Flag set to Yes, does not show manual journal entries.
    These Manual journals entries are created in AP
    Navigation: Payables -->Accounting --> Subledger accounting --> Journal Entries.
    Ofter creating the journal entries i ran Accounts Payable Trial Balance, when i go through the output i did not see the Manual journal entries which are created in AP.
    Please help me it is very urgent.
    Regards,
    Raju.

    Pl check your 'Report Defintion' once to ensure that liability accounts that you are using in manual entries are included in report definition.
    Regards,
    Tarun

  • Exchange rate differences posting failed due to manual journal entries

    when i run exchange rate differences and try to post the result, system shows "No matching recording found 'journal entry' (OJDT) (ODBC-2028) [message 131-183]" at the bottom panel ane the posting was failed. then i found the problem is actually from manual journal entries made to a business partner. as long as i deselect the manual journal entries, the posting was successfully done.
    i am using B1 2007B with pl09. is this standard in B1 2007B that exchange rate differences posting does not work with manual journal entries of BP?

    you are right! it is a bug in 2007B.
    The posting has no problem if the base reference number is same as the transaction number in the manual JE document. however, if we define a numbering series which is different from the transaction serial number, then we have problem with the posting. System searchs for the JE records by using base reference number as transaction number. That is why it could not find the JE document and then report the error message.
    so, where should i post the bug to SAP and let them fix the bug as soon as possible?
    thanks for the help!

  • Manual Budget Entry for COPA

    Hi,
    We are using COPA for budgeting operating expense. Our cost will be budgeted by cost center, product and region. At the GL level, it is a combination of cost element and characteric value (each characteristic represent a GL code / cost element).
    We are having problem in creating planning framework using manual budget entry,using transaction code KEPM. The problem faced is we do not know how to create a form (thru report painter) to be used for this manual entry which is flexible enough for us to choose the characteristic value from the parameter screen when performing the budget entry.
    Thanks

    Dear Susee,
       The layout or form is not required to be created by using report painter. On KEPM right click planning level create planning level say sales right click planning level sales and create planning package say sales planning for year 2007. after creating double click the planning package create parameter set.
    Regards
    Kaarthik.D

  • Audit Report Fix (Manual Journal Entries for Inventory)

    Hello!
    Curious if anyone has been able to fix an inventory audit report using journal entries?
    For example:  if an item was on inventory account 1500 based on it's item group assignment, then say 20 items are received for $1 each, then 5 are sold at $1 then the item group is switched and now it has an inventory account of 1520 and 5 more items are issued out.
    Running the audit report summarizing by accounts will show $15 as the balance in 1500 and -5 in 1520.  So when we go to actually check the accounts to reconcile them at the end of a period, our inventory accounts are always off.
    I have identified manual journal entries meant to 'fix' a GL account, but these have made the audit report basically unusable for reconciliation.
    Is there a way to journalize a change in the inventory accounts while making the change occur in OINM as well??
    I have looked through several expert empowerment sessions that acknowledge this as a problem, but do not offer any solutions.
    Thanks!
    Mike

    Hi Mike:
    Changing Item groups while inventory is on hand is a problem.  I have found a way to correct this, but it is a multi step process.  I would try this in DEMO first to make sure you get the proper results. 
    Try this.
    Below is the procedure for correcting the G/L Accounts on your Inventory Audit Report  It is complicated and needs to be performed when no other users are in the system.  Journal entries will not correct this problem.
    Here it is.
    1.     Review Inventory Audit Report by Summarize by Accounts for the item.
    2.     Do a Misc. Issue to remove the inventory.
    3.     Review Inventory Audit Report again. 
    4.     Change the Acct # on the Item Group for the Inventory Item to match the negative value account number.  CAUTION!  Make sure that users are not performing transactions on the system when you do this.
    5.     Do another Good Receipt for 1 each at price shown in Negative value account number.  Enter as a positive number.
    6.     Re-run the Inventory Audit to confirm that the negative account has been zeroed out.
    7.     Change Item Group Inventory account to remaining positive value account number.
    8.     Do an Inventory Issue for quantity of 1 each.
    9.     Re-run the Inventory Audit Report for the item.  All accounts should now have zero value.
    10.     Change Item Group account setting back to correct account for future.
    I hope it works for you.
    Regards,
    Vicki Smith

  • Manual Data Entry and Leading Sign in BCS

    Hi,
    can somebody help me,i need informations about the Leading Sign in the Manual Data Entry. Where can i make a field in the ucwb, to enter a Leading Sign at the Manual Data Entry in the ucmon?
    Thanks in advance,
    with regards,
    Thomas Rettenmaier

    Hi Thomas,
    What exactly you mean under 'Leading sign'?
    Best regards,
    Eugene

  • Manual Journal entry limitations in sap b1

    Hi friends,
                   We are creating Manual JE in sap b1. We give the access only two users for creating Manual JE. Now we will plan one more thing . Limitation of JE .  it is means, per user we will go to allow only 1000 manual journal entries only creating by the user. if they reached their limitation we block that . How i will block ? Is it possible in sap b1 ? or any store procedure is there?

    Number of Journal Entries could be limited by giving user specific document numbering series for a particular user.
    Hope this helps.
    Regards
    Iftikhar

  • Compensate an invoice through a manual accounting entry in ByD??

    Is it posible in SAP ByDesign to compensate open invoices through manual accounting entries?
    A client uses a non-standar  payment method for supplier invoices, so they make the accounting payments manually through "New document accounting entry".
    "Suppliers            to              other account... "
    In this transaction, we choose the type Manual entry for suppliers-Revaluation/Depreciation, and in the positions we specify the open invoice number and supplier number.
    But in the center Debits-Suppliers, the total balance of the supplier has decreased but the position invoice still remains open.
    How can I compensate this invoices then??
    Greetings

    Hi again Lokesh
    Yes, using New/Charge Credit, I can post a document type:
         Suppliers                        to                        Expenses account
    And after that, being able to compensate/clear the supplier invoice, that's ok.
    But the New/Charge Credit panel, cost allocation allows to add ledger accounts only of groups Expenses or Incomes, and in some cases I would need to use another ledger accounts in this panel.
    And in Fine tunning, accounts determination is limited for account types, so I would need to make too many changes at this point, but well I'll see...
    Many thanks

  • Park and Post management review step for manual journal entries

    We are implementing SAP and want to discuss the best way to automate in SAP a high dollar/value (maybe $100K and above) "park and post" management review step for posting manual journal entries. I believe SAP does not offer dollar/value limits as standard functionality for defining a park & post process. If this correct, what have you seen from your other clients using SAP park & post? Is there a different way to get where we want without customizing a workflow or generating a new transaction set?

    Hi you could limit the authorisation for the users only to park and then a responsible person could review it and post. You can set a tolerance limit for customers and vendors.

  • CENVAT utilization by Manual Journal Entry

    Hi All,
             Can anybody explain me the process of cenvat utilization by passing Manual Journal Entry.
    Please reply fast
    Regards,
    Abhishek

    Please read the following document which explains answers to your questions
    [https://websmp205.sap-ag.de/~sapdownload/011000358700006192062006E/IndiaLocalization_2005B.pdf]
    Check page no. 29 which explains "Creating Opening Balances for PLA/ CENVAT"
    Also have a look at the following Blog, Implementing SAP Business One for India Localization
    [https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/junior/view/wlg/10739]
    Edited by: Sridharan T on Sep 8, 2008 11:14 AM

  • Table for manual tax entry in MIRO

    Can anyone please tell me any function module or table name from where i can get the value of manual tax entry done by users while doing the MIRO transaction.
    i have tried using tables BSEG and BSEt but not getting any way to pick that entry,the manual entry is not coming in BSET table ,in BSEG it is coming but not getting nay criteria to identify that this line item is manual tax entry.
    Waiting for your reply

    Hello ,
    try RSEG or EKBE table.
    regards
    Prabhu

  • FC - Cross-category validation in Central Manual Journal Entries

    Hello experts,
    At a client site we are implementing several different reporting categories.  There are requirements to validate certain accounts between categories.
    Within the packages this is working fine - example:
    But when used in Central Journals the controls behave differently.
    In our issue there is a JE posted on the Category "IFRS-ACT".  We then try to post a journal on a different category (same ledger) and want to validate to make sure we are balanced between both.
    The control runs OK and recognises that there is a difference between the amounts stored in the separate categories but does not bring the amount stored on the category that it is validating against:
    Can anyone offer any advice on how to resolve the issue?  Or is it not possible?
    Many thanks!

    Hello,
    This is a known behavior. Controls and formulas using
    external data (data from another category) are not applied to local and central manual
    journal entries.
    Regards,
    Emna.

  • Comp. Backflush using Comp. Scrap(No BOM explosion(manual comp. entry))

    Hi Friends,
    *Component Backflush + MFBF Functionality:*
    Go to MFBF --> Select the radio button COMPONENT BACKFLUSH --> and click on
    COMPONENT SCRAP (application toolbar).
    Now select the radio button NO BOM EXPLOSION(manual comp. entry).
    Enter the Material Number and Production Version.
    Now click on PROCESS COMPONENT LIST (application toolbar).
    Enter Material, Quantity, UOM, Storage Location, Reason Code and press ENTER.
    By default the movement type will be '551'.
    Now when you click on SAVE button on the top. It will give you a material
    document number.
    I have created a new FM according to the standard component backflush functionality and called the BAPI BAPI_REPMANCONF1_CREATE_MTS in my Z FM. But the functionality of the standard BAPI is not giving expected results.
    I would appreciate if someone who had gone thru the same situaton could help me. I have done my research in different ways. But ended up finding none. Is there any other BAPI or procedure to achieve the above scenario.
    Thanks.

    Hi Keshav,
    Thanks for getting back to me.
    Below is how I populated the data.
    "I am not populating Backflush quantity and UOM because according to my
    "standard MFBF functionality I have choose NO BOM EXPLOSION(manual comp. entry)
    FLAGS-BCKFLTYPE       = '12'.
    FLAGS-COMPONENTS_TYPE = '1'.
    GENDATA-POSTDATE    = SY-DATUM.
    GENDATA-DOCDATE      = SY-DATUM.
    GENDATA-MATERIALNR = MATERIAL.
    GENDATA-PRODPLANT   = PLANT.
    GENDATA-PRODVERSION   = VERSION.
    "Z_IMPORT_TABLES is the custom structure which I have declared at TABLES in FM
    "I_GOODS is of type BAPI2017_GM_ITEM_CREATE
    LOOP AT Z_IMPORT_TABLES.
      WA_GOODS-MATERIAL    = Z_IMPORT_TABLES-MATERIAL.
      WA_GOODS-PLANT          = Z_IMPORT_TABLES-PLANT.
      WA_GOODS-STGE_LOC   = Z_IMPORT_TABLES-STGE_LOC.
      WA_GOODS-MOVE_TYPE = Z_IMPORT_TABLES-MOVE_TYPE.
      WA_GOODS-ENTRY_QNT = Z_IMPORT_TABLES-ENTRY_QNT.
      WA_GOODS-ENTRY_UOM = Z_IMPORT_TABLES-ENTRY_UOM.
      WA_GOODS-MOVE_REAS = Z_IMPORT_TABLES-MOVE_REAS.
    APPEND WA_GOODS TO I_GOODS.
    ENDLOOP.
    CALL FUNCTION 'BAPI_REPMANCONF1_CREATE_MTS' 
        EXPORTING
          BFLUSHFLAGS       = FLAGS
          BFLUSHDATAGEN  = GENDATA
        IMPORTING
          CONFIRMATION   = CONFIRMATION
          RETURN               = RETURN             ---------> error in this parameter
        TABLES
          GOODSMOVEMENTS = I_GOODS.
    When I execute this in debug mode, it is giving me an error in my RETURN parameter asking me to enter the backflush quantity and UOM which doesn't suits my scenario.
    Appreciate if you could let me know where I am doing wrong in my code and guide me in a better way to achieve this.
    Thanks.

  • Is it possible to automatically trigger a Manual Journal Entry?

    Hi Forum,
    This could apply to any situation:
    Suppose when I create an A/R invoice, I would like another manual journal entry to be created automatically. Is this possible and how could it be achieved?
    Thank you.

    Hi Mahendra and Gordon:
    This is the situation:
    Relates to DropShip Order:
    1.Client create DropShip Sales Order (against drop ship warehouse).
    2. DropShip Sales Order generates PO (Note no liability accounts are hit)
    3. Client wants to invoice their drop ship customer immediately by emailing A/R invoice.
    This mean the revenue accounts are already hit and our client has registered a revenue.
    Problem : However liability accounts are not hit and our client may not receive A/P invoice for say 2 weeks. This means the books show exagerated revenue.
    I suggested - A/P reserve invoice to be created immediately, but it needs to be canceled which leaves original PO in closed state in 8.8.
    Second method I suggested to create a manual journal entry to hit deferred liability account to be reversed in two weeks. The client says, this is backoffice job and they do not want them to have access to journal entries.
    In anycase, whatever reason, our client will change business practice, however, I thought let me check what it takes to create manual deferred liability auto reversal entry automatically.
    Is there any other way to handle this situation?
    Thanks.
    Edited by: Syed Aleem on Jun 24, 2011 3:13 PM
    As soon as A/R invoice is created, a deferred payable needs to be updated also automatically at the same time. This is the requirement.

Maybe you are looking for

  • Open with in Elements 12

    I used to be able to right click on a photo and select open with/Elements 11 but in Elements 12 it will not open photo. Any hints on how to do this. I am not a fan with organizer and I would like to select a raw file and right click on the photo and

  • What is the conversion of onload event to AS3 ?

    I have following code on AS2 . Now I need to convert into AS3. Please give your idea to change into AS3 myxml2.onLoad = function() {      // functionality goes here myxml.load(my.xml);

  • DNG Conversion Fails in Camera Download

    I've been using Photoshop CS4, Bridge and ACR for about a year.  I was sold on the Adobe rationale for converting to DNG and have been doing so using the convenient check box on the Photodownloader screen.  It has worked fine the entire time - until

  • Home Hub Phone

    Didn't know whether to put this in here, or ordinary BT Phone area, so please forgive me if its in the wrong one My Home Hub Phone has stopped working, doesn't ring when dialled, i cannot dial out from it, it appears in the manager as connected/regis

  • 20GB storage? why so little fr

    I recently bought a used NOMAD Jukebox 2 LX 20 GB on ebay. It works great and has been easy to figure out. My problem is that it says it is a 20GB, but with less than 00 songs loaded (most are mp3's, most in the 5 - 6 MB range) it says I have less th