Manual creation of CONTRL message in BPEL for EDIFACT message

Hi All,
There is a requirement in which, a B2B EDI XML message is consumed by BPEL process and some business rules are applied on the EDI XML message to check if the destination and dispatcher countries are valid. At this point if there is any error, then i need to generate a CONTRL XML message, pass it back to B2B to generate CONTRL EDI message to be sent back to client.
How can I acheive this? I am facing problem during transformation of D96B to CONTRL message, like populating UCS segment and UCD segment in CONTRL message.
Can anyone pls help? Is there any easy way to implement this, like calling Business rules from B2B etc. ?
Regards
Aparna

Aparna,
CONTROL xml is used for functional ACK, which is used for checking the syntactical correctness of the payload.
But in this case, it is a data validation
You may need to use APERAK message for the same.
Regards,
Dheeraj

Similar Messages

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

Manually create an output message for GRs

Is it possible to manually create an output message for a GR that has never been printed? There was an issue with our output determination and we have a GR that never had a message created when saved so I can't use MB90 to print it. The problem with the output determination settings has since been resolved; however we need to find a way to print this GR. Is there a manual procedure?
Thanks!

Hi
You can go to MB02 (material document change), enter material document. Double click on quantity, You can find messages button on the top.assign output and print the same.
regards
Srinivas

My friend has an apple iphone 4s, He could not make the ID on icloud, becase at the end of ID creation procedure, the message displayed, " the free icloud ID is not eligible for this device" what is the solution, thanx

My friend has an apple iphone 4s, He could not make the ID on icloud, becase at the end of ID creation procedure, the message displayed, " the free icloud ID is not eligible for this device" what is the solution, thanx

Your friend will have to create his iCloud account on a different iOS device. His device has already created the maximum number of iCloud accounts and cannot create another one.

Why there is no manual creation of deliveries for STO...

Individual(VL01N) : You can create one delivery for each sale order on the screen. There is no manual creation of deliveries for STOu2019s. Transaction VL01N
Why there is no manual creation of deliveries for STO...
Thank you very much.
Hoolaa
Edited by: Hoo Laa on Mar 28, 2011 12:28 PM

hi ,
you have to create a sale order process to delivery the tcode VL10B for STO Porcess. not VL01N.
Regards,
A.Sithanandan

Scenarios for "manual creation of inspection lot"

Hi QM gurus!!
I would just like to ask the main function of QA01 or "<b>Manual creation of inspection lot</b>"
What are the cases/scenarios where this tcode is used? I would really appreciate if you could help me.. Thank you.
Regards,
Heinrick Palad

HI,
The table below provides a brief overview of the functions you can use to process inspection lots. Appropriate cross references are included for the more extensive tasks or for those for which additional information is available.
Prerequisites
The inspection lot processing functions can be linked to various authorizations that are checked by the system whenever you try to process an inspection lot. The following types authorizations are relevant to inspection lot processing:
Material authorizations
The material authorization for QM is stored in the material master. For more information, see Creating and Changing QM-Specific Data for a Material.
Inspection type authorizations
This authorization controls which inspection type the user can access in order to create an inspection lot. The inspection type authorization is plant-specific.
No authorization checks are executed in QM when an inspection lot is created automatically.
Features
Function
Pushbutton / Menu path
What you should know
Accessing the initial screen for the inspection lot processing functions
Logistics ® Quality management ® Quality inspection ® Inspection lot processing ® Inspection lot
Creating an inspection lot manually
See Creating an Inspection Lot Manually
Changing an inspection lot
Choose Change
Enter the number of the inspection lot you want to change and then choose Enter.
Displaying an inspection lot
Choose Display
Enter the number of the inspection lot you want to display and then choose Enter.
Creating a new batch in an inspection lot
See Batch Creation in Inspection Lots
Cancelling an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Cancel lot.
See Cancellation of an Inspection Lot
Blocking/unblocking an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Block lot.
To unblock an inspection lot, choose Inspection lot ® Functions ® Unblock lot.
When you block an inspection lot, you cannot process the lot further. You must unblock the lot if you want to perform any additional operations.
Transferring stock in an inspection lot
See Stock Transfers
Making corrections to inspection lot quantities
See Corrections to Inspection Lot Quantities
Creating a QM order
Call up an inspection lot in the create or change mode and choose Goto ® Insp. lot acc. assgnmt.
See QM Order Creation
Resetting the sample calculation
See Resetting the Sample Calculation
Printing inspection instruction/sample-drawing instruction
See Printout of Instructions
Approving a task list
Call up an inspection lot in the create or change mode and choose Inspection lot ® Functions ® Give approval
If the task lists in your company must be approved before they can be used, you should make sure that only approved task lists are assigned to an inspection lot. If the system selects a task list that has not yet been approved, you can use this function to approve the task list (provided you have the necessary material authorization).
this link help u.
http://help.sap.com/saphelp_erp2004/helpdata/EN/be/00bbe7ca5311d2961800a0c930e04c/frameset.htm
reward is usefull.
tahnks.

When I check my iCloud backup it says it has never backed up and when I try to back manually it gives a message of " estimating back up time" and doesn't back up even after having left it for many hours?

When I check my iCloud backup it says it has never backed up and when I try to back manually it gives a message of " estimating back up time" and doesn't back up even after having left it for many hours?

Yes I have tried that last weekend ad this weekend. I have tried wi fi at different times of the day too; in case it is speed issue. I have tried selecting only backing up limited content and not every thing per what other users suggest.
It's maybe either the router is lousy or there is something wrong with my software or hardware.
Appreciate your thoughts
Thanks!!

Is BDC's CALL TRANSACTION 'VA01' is not equals to ONLINE(manual) creation?

Hi Experts,
Ours is IS-Oil.
If the user do not enters/inputs OIC_MOT (Mode Of Transport) at ITEM level on the External Details popup, SAP will get it from Customar Master-KNA1 and populates on it, because its a mandatory field (OIC_MOT), but, do not throws an Error message and interupts the sales order creation process.
We have a inbound IDOC posting function module for sales order (VA01), which posts the sales oreders by using BDC (CALL TRANSACTION 'VA01') in the system. In this function module, we are not populating the OIC_MOT field contained segment by hoping SAP will populate/default it while it hits CALL TRANSACTION 'VA01' of my BDC of my FM of IB IDOC. But, SAP is not defaulting/populating and throwing error message (saying 'OIC_MOT field is a mandatory input field' data is missing) and IDOC is failing, pls. let me know Wht its so? is the BDC's CALL TRANSACTION 'VA01' is not equals to ONLINE (manual ) creation of sales order?
Thank you

Hi
Several transactions can ba a different behavior between online and bdc process, but if you simulate the trx by SM35 you should find out these gaps
I don't know OIL vertical, but the main transactions have a bapi can be used insted of BDC program (BAPI_SALESORDER_CREATEFROMDAT2, but perhaps there's a particular BAPI for OIL).
Max

Stop Automatic creation and confirmation of Transafer Order for a doc type

Hello All,
There is a requirement that I need to stop Automatic creation and confirmation of Transafer Order for a particular document type.
The issue is that sometimes the cycle goes upto creation of Invoice automatically but sometimes this does not happen. More over the user wants that the transafer order needs to be confirmed manually.
Can u please provide the .steps involved for thie case.
Thanks
Chandrashekhar

Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2

Manual creation of planned order in REM

Hi,
Can we manually create a planned order in repetitive manufacturing? I know that in case we run MRP , then planned order for finished is created with order type 'PE' due to which it cannot be converted to production order.
I dont want to run MRP , still can i create a planned order manually with the same order type 'PE' ? I tried in MD11, but not getting option to chose PE as it is not available in F4 of planned order profile.
Please help..
Regards.

Dear,
You cannot create a planned order with PE order type manually, because a planned order of REM related material gets order type "PE" only when it is assigned with a Production Version.
So achieve manual creation of REM Planned order with PE type with the following options,
I - Using MD11 transaction create a planned order with LA type and assign a suitable REM related Production version to the planned order during creation itself, now this order would automatically become "PE" order type on saving the order.
2. In the planning table using MF50, you can directly create a planned order for a production line using F7 key.
Regards,
Prasobh

Check on Manual creation of PM order

Hi,
     I have a business requirement that the manual creation of a particular order type should be stopped i.e. when i am going to create that order type through IW31 or the generation of that order type even through a notification should not be possible.The system should not allow that.Pls. reply.
Edited by: ind kumar on Aug 4, 2011 3:07 PM

Hi
Please use the user exit IWO10009.
we can add the condition that the field "Order Category Indicator Plant Maintenance"-AFIH-AKKNZ has below values, you can restrict them to create manualy.
"Category
AFIH-AKKNZ"     Short Descript.
blank     Order created online
1     Order created historically
2     Order created subsequently
3     Order from notification
4     Order from maintenance plan
5     Order from reference
6     Follow-up order
7     Generated order from IM_SM_CREATE_ORDER
8     Order for an SD service item
9     Order for an SD repair item (RMA)

Not scheduling on manual creation of planned order

Creating planned order through MD11 and noticed there scheduling not done and capacity planning not done and on doing scheduling manually dates altered and capacity planned which are appearing in CM01 for the respective week
Planned order created through MRP are fine with scheduling an capacity planning .
Please let us know what could be a reason for not updating on manual creation.

Hi
This is standard behavior of SAP as when you create the planned order through MD11 manually , you need to do the detailed scheduling manually by executing schedule in Edit>Schedule.
Check this thread:
Need Automatic Lead-time scheduling in Planned Order using MD11
Regards,
Anupam Sharma

MANUAL CREATION OF BATCH NUMBER(EXTERNALLY) - NOT TO BE ALLOWED

MANUAL CREATION OF BATCH NUMBER(EXTERNALLY) - NOT TO BE ALLOWED while creation of Process Orders.

Hi,
Check t code OMCZ whether internal Batch no assignment is active or not.
From F1 help
In this step:
you activate internal batch number assignment
you define whether internal batch number assignment is allowed for goods receipts that have an account assignment
Standard settings
The standard version of the SAP system contains a predefined number range.
Further notes
Batch number assignment uses two function model exits with which you can define templates for batch numbers. You make the necessary settings in work step function module exits for internal batch number assignment.
The system checks whether the assigned batch number already exists in the system. Should the number already exist, the function is terminated.
When creating a client by copying another client, please note that internal number assignment is not active in the target client. You must activate it manually.
Regards
Anupam Sharma

When opening my Outlook 2010 with new added e-mail account with Exchange Server, I have to click manually on my standard e-mail account for checking mail

When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outlook
2010 check all my four e-mail accounts without manually click on my accounts?
Sincerely
Ketil Hothorp

Hello Ketil,
Good Day...
Seems to be the Issue is Syncing emails, now I would recommend you to Remove and Add the Account and try and check if the emails are getting synced automatically.
Hope this is with Single User. If it is with Multiple Users then we need to check the permissions assigned.
Regards,
Praveen

Manual creation of inspection lot

on october 1st i received the material (QM is activated for this Material) 2000 qty from the vendor 100011
system automatically created Inspection lot 2000 qty......in that i i have posted only 1000
now in MMBE i am seeing 1000 in QI stock now today i have to move the stock from QI to unrestricted.....
Manually i created inpection lot using QA01 for the Remaining 1000 qty......after that i am clueless how to proceed with pls guide me.............with the following steps.......

Hi
Creating Manual inspection lot for the remaining 1000 qty will not prompt for the stock posting. Here u can only record the results for the same.
For the balance stock posting, u need to go to the same inspection lot( old one which was created for the 2000 qty against GR). To search for this lot, in QA32,
select the radio button " select all inspection lots"
Provide the date range. if u are not sure about the dates, keep blank
provide material, batch etc.
Now after execution, check the inspection lots for the status SPRQ or SPST
Select the insp lot & click on Usage Decision. Post the balance stock to unrestricted.
Thanks
Sachin

Manual creation of CONTRL message in BPEL for EDIFACT message

Similar Messages

Maybe you are looking for