Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

Similar Messages

[svn] 713: Merging recent sample eclipse project changes for framework and rpc flex library projects to the trunk

Revision: 713
Author: [email protected]
Date: 2008-03-03 10:19:09 -0800 (Mon, 03 Mar 2008)
Log Message:
Merging recent sample eclipse project changes for framework and rpc flex library projects to the trunk
QA: No
Doc: No
Bugs: N/A
Modified Paths:
flex/sdk/trunk/development/eclipse/flex/framework/.actionScriptProperties
flex/sdk/trunk/development/eclipse/flex/framework/.flexLibProperties
flex/sdk/trunk/development/eclipse/flex/rpc/.actionScriptProperties

Thats good news.

Motion won't open new project, won't open utility window in old project

When I try to open Motion from the dock, it gives the license information, but no project opens...it just stays with that opening window.
When I try to open an old project, there is no utility window (no file browser, library, or inspector).
Help!

I tried to do that before, but I couldn't find that plist on the Macintosh HD icon. As per your instructions, I later found that plist file in my home (i.e. 'user') folder.
Works now! Thanks for your help!

Manual creation of user aliases for email

Hi,
I was able, to create email users using command line tools. Works fine so far. Is there also a way to add aliases and distribution lists.
If so, how does the syntax look like.
Cheers
Eric

Hi Subash,
Finally am able to create client and user also successfully.
by again doing the client copy with change of selected profile SAP_CUST----.
Customizing.
Regds
phanikumar

Starting New Project, Need to Cleanly get rid of old project.

I am about to finish up a project today, that I've been working on. I want to clear out my computer of any data/file/etc. so that when I start my new project, I will be starting fresh. What can I do to make sure this happens without trashing anything I'm not supposed to? Avoid fragmenting? Basically want to ensure I am starting with a clean slate for my upcoming project. Any insight would be appreciated!!!
My configuration is as follows:
I edit in HDV on a PowerMac G5 dual 2.7, 2G RAM (about to install 2 more G's), 2x250 GB internal hard drives. One hard drive store OS & Apps, the other is my scratch disk. If you need further info, I will be more than happy to give it. Thank you so much in advance!

Most of the time when you 'erase' a file or a disk, it simply changes the first few charactors in the heading without doing anything to the rest of the information. The file system does not recognize the file/directory anymore but most of the information is still there. This is what file recovery software relies on to pull your files back from the grave.
"Zeroing" a drive is to write an unrelenting sequence of zeros - which in effect - completely erases everything on the drive. However, there is some magnetic residue left that bad bad people can use to discover all the 'adult' sites you have been visiting and storing material from should they get their hands on your drive. Writing 7 or 32 sequences of zeros is one way to totally erase a disk beyond reclamation.
In the case of acceptable use, a simple erase is all you need. Do you have something to hide? lol
x

I would like to see the ability to export the framework to VISIO so I can print out the site for a client to visually see the site.........

I think I said it in the title

Thanks
I forgot about that site. I remember now about putting something into that site about a year or so ago.
Kelvin

MS Project Pro for office 35 integration

We currently have 6 office 365 for mid-size business accounts active and are also considering to purchase the MS projects pro for 365.
I have some questions on this subject.
We would like to have 1 or 2 main editors who can create the necessary projects using the desktop environment.
The other users only need to be able to see them in the office 365 share-point environment. (as i understand correctly, opposed to the MS projects standard, MS projects for office 365 supports this feature?)
As I've been told, the MS projects for offcie 365 is only possible in combination with an E3 account.
In this case is it possible to convert 2 of our midsize business to E3 enterprise accounts, or do we need to subscribe every user to the E3 account?
In the second case does each subscriber need to have an additional MS projects for office 365 subscription or is it sufficient to just have this for the 2 main editors?
Just to make clear i am talking about MS project pro for office 365 not Office 365 project online.
http://office.microsoft.com/en-001/project/project-management-software-as-a-service-project-pro-for-office-365-FX103797691.aspx

Gerald,
I have gone back and installed project pro for Office 365 on a number of machines that already had O365 so that should not cause you any issues. Sometimes repairing the exisiting office, then try the install again fixes the issue.
I would second the install all critical updates and reboot, that tends to solve a lot of issues.
Cheers,
Curt Winter
Certified Microsoft Professional
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

How to change the resource of an old project from 7830r to 7841r for a NI FPGA module?

Hello,
Could you please tell me what is the easiest way to change the target resource (the device
information) for the FPGA in a old project? We are using a 7841R board, but the
old LabVIEW project always treat the board as 7830R and I therefore can not complete the compiling and run
the project.
Thanks!

You need to add the new board as a new target to the project. If you're using a recent version of LabVIEW you can then drag all the resources from the old FPGA target to the new one (I don't know if this works for IO items). In older versions of LabVIEW, you may be able to drag the files but you'll need to recreate the IO, FIFOs, memory blocks etc.

Deleting old projects in Xcode/Organizing projects

Any information or guidence is appriciated on the following.
1.) How do I delete old projects in Xcode? I have many old projects that I do not want taking up space.
2.) Is there any tutorial or reference that I could look at to improve my knowledge on....
a.) Saving Projects to certain locations (Advantages/Disadvantages)
b.) How do organize my projects with in Xcode more efficiently?
thanks

Delete your old projects by moving the folders containing the project's files to the Trash.
Save your projects wherever you want. You said you have many old projects, which implies you've been using Xcode for a while. Did the location where you saved your old projects cause you any problems? If not, keep saving your new projects where you saved the old projects.

When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

Help preparing site for google search

Hello. I'm not sure if anyone will be able to help me or if I will have to contact google but I am trying to figure out how to prepare my site for Google Search. Right now my site does appear in the search results but not how I would like it to. In the screenshot below my site is The Official Website of Fab Hollie. I do not want the "About" and the "Contact Us" pages to show up as they are child pages and not parent pages. Is there anything I can do in Muse to prevent this or is it a google thing?
I know this is probably a google thing but I would like my search result to display with sitelinks like the example below. I'm new to the whole google webmaster thing so I'm not sure if there is a way I can prepare my site for this in Muse?
Thanks

Hi,
This will be done by Google, Try to use demote sitelink option in Google Webmaster, and see if that helps
https://support.google.com/webmasters/answer/47334?hl=en

Project Server 2010: PWA Removing Default Project Site Security Groups When Creating a New Project

I looked for this specific issue with Project Server 2010/PWA/SharePoint and could not find an exact answer... hopefully someone can help.
We are currently using Project Server 2010 and have a number of project site templates that are used dependent upon the enterprise project type selected. Each of these project site templates have unique permissions which should create the default security
groups on the project site upon publishing/syncing:
<Project Name> Members
<Project Name> Owners
<Project Name> Visitors
<Project Name> Project Managers (Project Web App Synchronized)
<Project Name> Team Members (Project Web App Synchronized)
Web Administrators (Project Web App Synchronized)
Whether a user creates a project through PWA or Project Pro 2010 and imports the project into PWA, we get a weird result in the Site Permissions of the newly created project site. PWA will remove all default security groups from the project site template
and add a whole list of users in the Site Permissions list without groups.
Once the project is published and the project site is created, we can then go back and add those default security groups back in the project Site Permissions and even add a couple of custom groups without them being removed on all subsequent project syncs
or publishing.
How do we get PWA to not overwrite the project site templates' security groups and place each user in the proper default security groups? At the same time, how is PWA adding a number of users into the Project Site Permissions?
Thanks in advance.

Paul,
Thanks for that information. Right now we are using the Test environment to turn the Auto-sync feature back on. I suspect that the reason this is happening is due to PWA groups/categories/security templates. There may be more than one PWA group that is "overwriting"
the default project site groups upon initial creation of the project. We will look further into the security settings to tighten up the policies.

How can I save previews for old projects, while burning the project to DVD?

I'll admit, I haven't read the user manual cover to cover (or screen to screen for the electronic version), and haven't spent hours combing the discussions here, but I have searched for all the relevant keywords I can think of and can't find a concise answer to this question.
I get the basic idea of Vaults (I think), but haven't found much info about long term storage of projects. I'm fulltime freelance, but not super busy, and I can easily generate 100,000 images each year. I don't have the cash to be keeping all of these images in Aperture projects on external hard drives for eternity, and I'd be surprised if anyone else does. Good thing I'm not a medium format digital shooter producing 50GB each day huh?
I remember seeing a clip of a photographer 2 or 3 years ago discussing the differences between storing digital and film images. He was making the point that throwing away files you don't think you'll need again can be a mistake, citing a shot he had of Clinton and Lewinsky together, before Clinton and Lewinsky were news. "If I'd been shooting digital, that image wouldn't exist today". It was a great pic, and when that whoel scandal erupted, it made him alot of money.
So at present I'm storing every image I take in finished projects on DVD trusting that in the future I'll be looking for a shot of someone I may have shot 5, 10, 15 years ago.
I caught part of a discussion that talked about keeping the preview files for all the images (and subsequent versions) for each project. I'd love to be able to keep lo-res previews/copies of everything I've shot to date, and have them immediately accessible on my hard drive, while my full size projects are safely stored on DVD, taking up space on a bookshelf rather than on my hard drive. Loading 10 DVD's worth of projects to see what's inside them is a headache I'd like to avoid if possible, in favour of instantly checking out lo-res previews to look a shot up.
Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?
20" iMac and G4 Powerbook Mac OS X (10.4.8) "A creative and dynamic professional" (I lie alot and can't sit still)

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

What are privilage for user is required to create project api

Hi
I have to create project using project template I have given info manual to create project manually.
But key member should not be null....error occurs
I have given person I'd and person role type as project manager.
Please help me in this regard.

this is the code i have used ...
declare
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
--deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_key_member_rec pa_project_pub.project_role_rec_type;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
--cursor for project in data
/*CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
--cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;*/
------------------------Cursors used for validations----------------------------------
--cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
--cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
--cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
--cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y'; */
BEGIN
begin
mo_global.set_policy_context('S',85);
mo_global.init('PA');
end;
fnd_global.apps_initialize ( 50321,56533,275);
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'SVENKAT'
and responsibility_name like'GB Projects Implementation Superuser';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
--FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name='GB_NRE_Template';--rec.created_from_project_name;
EXCEPTION
when others then
null;
/*O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';*/
--Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
/*UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;*/
END;
-----retrieving -- validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME='IT Project Organization';--rec.carrying_out_organization_name;
EXCEPTION
when others then
dbms_output.put_line ('error in carrying org');
/*O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);*/
/*UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;*/
END ;
v_project_in.pm_project_reference :='GB_NRE_Template'; --rec.segment1;
v_project_in.project_name :='VENKAT_TEST'; --rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := 85;
v_project_in.project_status_code :='UNAPPROVED'; --rec.PROJECT_STATUS_CODE;
v_project_in.description := 'interface';--rec.PROJECT_DESCRIPTION;
v_project_in.start_date := sysdate;--rec.PROJECT_START_DATE;
v_project_in.completion_date := sysdate + 30; --rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := 'EVENT/EVENT';--rec.DISTRIBUTION_RULE;
--v_project_in.project_relationship_code := ;--rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
--project relationship code validation
/*BEGIN
--for prc in cprc
--loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
--end loop;
END; */
/*--project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) --null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END; */
--m := 1;
   -- l_person_id := 38506;--v_personid;                      -- need to get from Apps
   -- l_project_role_type := 'Project Manager';
        /* v_key_member_rec.person_id := 83369;--v_personid;
          v_key_member_rec.project_role_type :='PROJECT MANAGER';
          v_key_member_rec.project_role_meaning := 'Project Manager';
          v_key_members(1) := v_key_member_rec;*/
           v_key_members(1).person_id := 83369;
            v_key_members(1).project_role_type :='PROJECT MANAGER';
            dbms_output.put_line('persion id for key member '||v_key_members(1).person_id);
--project status code validation
/*BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null)-- null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;*/
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
/*validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannnot be less than start date';
end if;
END;*/
--------Update staging table for the error records--------
/*BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrent project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;*/
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=1;
--FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :='Labor';--tsk.task_reference ;
v_tasks_in_rec.task_name :='Labor';--tsk.task_name;
--v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date := sysdate;--tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=sysdate + 30;--tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
--v_a:=v_a+1;
--end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
/*UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success*/
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
/*UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;*/
raise API_ERROR;
end if;
--END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
error .....
Set Global status ->S
persion id for key member 83369
Error at PROJECT_STATUS_CODE>1
An error occured during project creation
Error message v_data ->Key Member is a mandatory Quick Entry field. Values must be passed for project_role_type and person_ID. (PROJECT=GB_NRE_Template)
Error message v_msg_data ->PA

Project Server default groups when we create new project site

Hi,
When we create new project site in project server 2013 in site settings page some default groups are already present with some default permissions and some default members.
Interesting thing is that the members of these group are same when ever we create a new site.
Can you please help me understand, what these groups are, how they get created and how they are having some default members. Where are these members coming from.
Our project server is having project server permission mode.
Thanks,
Bhawna.

I briefly searched the MSTechNet but was not able to find a succinct article on this point for 2013, if someone has that, can they pls share. However, if you read most of the articles under this area,
you get the idea.
http://technet.microsoft.com/en-us/library/fp161361(v=office.15).aspx
From 2010 this applies and is still "similar"
http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx
In 2013, for every Project Site (connected SharePoint site as it is now called in 2013), 2 Site specific SharePoint security groups are created: "SiteProjectName Project Managers (Project Web App Synchronized)"
& "SiteProjectName Team Members (Project Web App Synchronized)".
And Web Administrators (Project Web App Synchronized) is also created.
In addition, the default SharePoint groups for: Site Members, Site Owners, Site Visitors are present but remain empty.
Project Server controls the creation of these groups and the membership. The membership is a "formula" that goes something like this: If the user is the Project Owner then put them in the PM group.
If the user is a PWA Administrator, then put them in the Administrators group. If the user is a team member on the project, then put them in the Team Members group. There are other factors like RBS that are used in the formula.
Reading the descriptions of the groups reveals that for Project Managers =
Users who have Published this project or who have Save Project Permission in PWA.
For Team Members = Users who have assignments in this project in PWA.
I believe these are the old 2010 descriptions and actually Team Members = anyone who is part of the Build Team even if no assignments.
Further complicating matters is that if you are a site collection admin, you will see all the groups, for PWA and for all the project site (b/c you are actually seeing the site collection groups).
But only the ones mentioned above apply specifically to this project site.
Hope this sheds some light on the topic,
Thanks, Eric S. Pcubed

Manual creation of Project Site for a project is taking old project site template.

Similar Messages

Maybe you are looking for