Manual excise map with which purchase order

Dear experts,
Can you tell me which manual excise map with which purchase order ? give me table name and report  if you know !
Thanks

Dear Mr. Siva,
Sorry for the late reply, actually I was out of touch from this issue for few days. I am sending you the detail about my configuration----
I have assigned this condition type as following ... 
TAXINN     ZA1X     A/R AT1 Quantity based
TAXINN     ZECS     A/R Cess Quantity Based
TAXINN     ZEXP     A/R BED Quantity based
Condition type information
     Control data 1
Cond. class       D  Taxes
Calculat.type     Q  Commodity
Cond.category  D  Tax
Rounding rule         Commercia
StrucCond.
     Change which can be made---
Manual entries      C       Manual entry has priority
Still it is not showing the duty at the time of (J1IIN)
It may be I am missing some configuration or wrong configuration.
give me some hints...
thank you
Vijay

Similar Messages

  • Excise Invoice is captured with another Purchase Order

    Hi
    We have a scenrio, transfer the material from debond plant to mfg plant after imported material in kept in Bonding area. STO po is raised to from imported plant to mfg plant with Imported duties as delivery costs.
    Bill of entry is provided for all the materials as one. While capturing the excise amount at line item level is difficult so, captured at first line item level as total because material is Same (Material is Split valuated materials with 3 batches). First GR is done properly but next GR for 2nd and 3 rd line items are refered with earlier Bill of entry, system promprts the error message "Excise Invoice is captured with another Purchase Order".
    Please do the needful.
    Regards
    Mohan

    Hi,
    Please be informed that for one a GR document wrt PO only one excise invoice can exist.
    Ex PO-4500000010
    GR no 5000000010
    only one excise can exist and if the same excise invoice is reffered to another GR with the same PO system will throw an error message. Please let me know the exact business requirement in detail.
    Naveen

  • Manual Excise duty with fixed amount in Sales order

    Dear Sir/Madam.,
    This is regarding manual excise duty with fixed amount in SD Module . I
    have created three conditon type ZEXP,ZECS,ZA1X for BED ,CESS and HSED for manual excise duty with fixed amount, other than the standard condition type JEXP,JECS,JA1X , because  my TRADING SALE scenario needs both condition type with fixed percentage and fixed amount conditions also.  After the pricing procedure updation for trading sale, I have tried to create the sale invoice with VF01 , it is ok till  the VF01 for manual excise duty but when ever I tried to excise posting with J1IIN. the manual excise duty show only zero, whiile we used the  standard Condition type JEXP, JECS, AND JA1X with fixed percentage  8% -2% -1%  our over all steps are ok till J1IIN for excise invoice, mean BED ,CESS and HSED shown correctly.
    I have done some experiment with the TAXINN tax procedure in (Logistics general > tax on good movments> india> basic settting>determination of excise duty> Maintain excise default), I have replaced the condition types  JEXP, JECS and JA1X with the ZEXP, ZECS and  ZA1X in the corresponding filed. then after my manual excise duty with fixed amount data  was reflecting
    in the J1IIN and it start to work properly with the excise duty but my fixed percentage condition type stop to working mean, it was now showing the duty at the time of  excise duty posting J1IIN .
    I want to use both the condition types in the same TRADING SALE scenario. May anybody help me to solve this issue.
    With Regard
    Vijay Kumar

    Dear Mr. Siva,
    Sorry for the late reply, actually I was out of touch from this issue for few days. I am sending you the detail about my configuration----
    I have assigned this condition type as following ... 
    TAXINN     ZA1X     A/R AT1 Quantity based
    TAXINN     ZECS     A/R Cess Quantity Based
    TAXINN     ZEXP     A/R BED Quantity based
    Condition type information
         Control data 1
    Cond. class       D  Taxes
    Calculat.type     Q  Commodity
    Cond.category  D  Tax
    Rounding rule         Commercia
    StrucCond.
         Change which can be made---
    Manual entries      C       Manual entry has priority
    Still it is not showing the duty at the time of (J1IIN)
    It may be I am missing some configuration or wrong configuration.
    give me some hints...
    thank you
    Vijay

  • Issues with printing purchase order

    Dear friends,
    I'm having some issues with printing purchase orders.
    Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
    Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
    The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
    What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
    kind regards,
    Camilla

    hello all,
    thanks so far for your reply.
    i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
    The output conditions fpr purchase order have also LOCL (local printer)
    The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
    Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
    Is the automatic printing something that is maintained in SPAD?
    kind regards and thanks for your help sofar

  • Split Valuation of Materials for which Purchase Order exists.

    Hi,
    I want to do the split valuation of materials for which Purchase Order already exists and GR has taken Place.
    Is there any way to do it?
    Regards,
    B P Singh

    Hi,
    Yes, you can.
    Please start transaction MM02 and set the valuation category > you will get an error message > click on 'Display Errors' button and SAP will say what hinders you from the change.
    - you should set the stock level of your material in previous and current period to 0 (it is possible with posting date in the past; MB1A201 > after material master settings you can set back the stock level via MB1A202)
    - delete transactional data (including your PO)
    - mark batch records with DF and archive them
    - etc
    BR
    Csaba

  • I am a teacher that uses the iPad in the classroom.  I have an itunes account setup for my classroom without a credit card listed. Is there anyway for me to purchase apps to use in the classroom with a Purchase Order?

    I am a teacher that uses the iPad in the classroom.  I have an itunes account setup for my classroom without a credit card listed. Is there anyway for me to purchase apps to use in the classroom with a Purchase Order?

    (Being sarcastic - its because only the US is big or important enough to warrant volume licensing....)
    At this time, until Apple decides to release volume licensing structures outside of the US the only solution would be to use your purchase orders with a company that sells the iTunes Vouchers and redeem those.
    However - even then its hard to stay on the right side of the EULA when the terms are all couched in reference to "Personal Use"
    I have spoken to some developers in the past about educational discounts, or even support for proxies, and wasn't really impressed with their answers.   But hey - even Adobe has trouble with proxies and consistent approaches - we can't expect independent developers to be able to match the same capabilities...

  • Create list of materials with its purchase order texts from material master

    Dear all
    Simple question I do wanna ask.
    Just need to get out a list with my materials with its purchase order texts from the material master.
    As I do know that PO text is not stored on a table, it might be difficult to get it out from the system.
    Does anyone of you know how to retrieve it simply?
    Regards
    François

    Check this link Material Master Purchase Order Text.

  • Oracle Purchasing - How can I link a requisition with a purchase order?

    Hi All,
    I have a problem. I don´t know how to lonk a requisition with a purchase order.
    I use the following tables:
    PO_REQUISITION_HEADERS_ALL
    PO_REQUISITION_LINES_ALL
    PO_LINES_ALL
    PO_HEADERS_ALL
    PO_DISTRIBUTIONS_ALL
    Those are the mains tables, but I can´t obtain a purchase order information based on a created requisition.
    Someone could help me?
    Thanks,
    Facundo.

    Absolutely, Emile.
    Use the Tooltip Widget. Inside the Tool Tip you can put what ever content you wish. Let me know if that works for you.
    If not can you supply a link?

  • How can I purchase FormsCentral premium for my organzation with a purchase order?

    How can I purchase FormsCentral premium for my organzation with a purchase order?

    Hi;
    A FormsCentral subscription purchase requires a credit card in one of the supported countries for purchase.  It cannot be purchased using a purchase order, only a credit card.
    Thanks,
    Josh

  • How to enable VSF cosumed with Individual purchase order(TAB)

    Hi, SAP guru.
    I want VSF consumed with individual purchase order (TAB).
    Could you give me the instrunction please?

    I explain here in detail.
    (In material master, srgategy group is '40'.)
    When you create a sales order with item category 'TAN', this sales order consume 'VSF'.
    and you change this item category to 'TAB', the consumption or allocation disappear.
    I want this TAB to be kept consumed with VSF.
    Could you give me the possibility and the instruction.
    For example;
    1. Intial
                                        Requirement
          Nov-1st    VSF      100
    2. When you create SO with TAN (10 pcs), SO consumes 10 of VSF.
                                        Requirement
          Nov-1st    VSF      90
          Nov-1st    SO        10
    3. And you change item caetgory to 'TAB',  VSF is back to 100.
                                        Requirement
          Nov-1st    VSF      100
    --- Cstock    SO (TAB)
          Nov-1st    PReq       10          
    What I did
          Requirement class '050' and 'KEB'    (OVZG)
                           VPZUO  is '1'  (I think sap standard)
        => It suppose that SO cousumes VSF, as VPZUO is same as ZUVKZ of PIR.
          Schedule line category 'CB'      (OVZ8)
                            Check 'Availability check for sales' (ATPPR) and  'Transfer of requirements' (BEDSD)
         =>  SO is displayed in MD04, but not consume VSF.
    3'. And you change item caetgory to 'TAB',  VSF is back to 100. SO doesn't consume it.
                                        Requirement
          Nov-1st    VSF      100
    --- Cstock    SO (TAB)
          Nov-1st   SO           10
          Nov-1st    PReq       10

  • Excise Invoice Number through Purchase Order no. or Material Document no.

    Hi,
    Is there any report through which I can find Excise Invoice Number (J1IEX) with the help of either Purchase Order no. or Material Document no.?
    Can anyone provide some idea in this regard?
    Thanks in advance

    Using transaction code J1I7,You canfind excise invoice no in report,with purchase order no. or Material document no. as inputs.

  • Preventing manual price condition maintenance in Purchase Order

    Hi Guys
    'I am seeking to add code somewhere either in the Purchase Order program or in pricing which will only allow some users to manually overwrite the automatic price. I am not sure however where to put the code (1) in a PO BADI (2) In a pricing requirement or (3) A.N. other suggestions. I am also unsure as to whether I should grey out the price field as default and open it for manual entries for certain Vendor account groups OR to re-run pricing when users try to manually change the price.
    Kind Regards
    Brett

    Hi,
        You may use the standard condition type JEXC (Manual Excise) in MM pricing procedure. Maintain JEXC as statistical condition and maintain subtotal as 5 against JEXC  in M/08.
    Now, go to OBQ3 and maintain  calculation type as 355 against JMOP.
       Now system will copy the JEXC value from MM pricing to JMOP in tax procedure.
    Note: 1. Tax code should be assigned to company code.
              2. JMOP condition type should be maintained correctly in "classify condition type" configuration.
    Test the scenario and revert back.
    Regards,
    AKPT

  • Technical mapping incomplete for Purchase Order when we change address.

    Hello Experts,
      When we change the delivery address manually in the Purchase Order item we are getting the message 'Customs Business Partner Required'.  In the GTS system the PO status as Technical Mapping Incomplete. 
      Our system is configured to take the delivery address from the plant automatically.
      If we don't change the address manually in the PO we are not having any issue. 
      Please help me with this, this is very ungent.  Thanks in advance.
    with best regards
    K. Mohan Reddy

    Hi Mohan,
    Please counter check your configuration/mapping  per the SAP Configuration guide.
    This message is very clear, and points to the communication problem between your feeder system and the GTS Server/client.
    Check the following:
    System Communication
    Connecting the Feeder System to SAP Global Trade Services
    Defining a Logical System
    Assigning the Logical System
    Defining RFC Destinations for RFC Calls
    Defining RFC Destinations for Method Calls in Feeder Systems
    Defining the ALE Distribution Model
    Connecting SAP Global Trade Services to the Feeder System
    Defining the Logical Systems of the Feeder Systems in SAP GTS
    Assigning the Logical System
    Defining Groups of Logical Systems
    Assigning Logical Systems to Logical System Groups
    Defining the Target System for Remote Function Calls
    Defining RFC Destinations for Method Calls in SAP GTS
    Thanks,

  • Report with open Purchase orders and open Goods Receipt (without invoices)

    Dear All,
    We require a report in purchasing which will show:
    1. open purchase orders
    2. open goods receipts
    We do not want POs and GRs that have been created into invoices to be included in the report.
    At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
    I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
    Any help would be appreciated.
    G.

    Hi,
    Try ME2N, Select WE101....Also Select ALV
    go to next screen....Go to change layout
    Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
    Hope Help U!
    Regards,
    Pardeep Malik

  • Invoice not match with the purchase order - Error FRM-40350

    Hola a Todos, tengo un problema en el modulo AP al ejecutar "Lotes de Facturas" (Invoice Batches) cuando se quiere asociar una Orden de compra con la Factura, en las siguientes imagenes se muestra lo que sucedio.-
    Hi Everyone, I have a problem in the AP module to run "Invoice Batches" when you want to associate a purchase order with the invoice is not match, in the following images shown what paso.-
    Version Oracle EBS = 11.5.10.2
    he visto las siguiente tablas y esto me muestra
    Table RCV_TRANSACTIONS, no record found.-
    gracias si alguien sabe cual es el problema.-
    thank..

    Hi,
    Please be informed that for one a GR document wrt PO only one excise invoice can exist.
    Ex PO-4500000010
    GR no 5000000010
    only one excise can exist and if the same excise invoice is reffered to another GR with the same PO system will throw an error message. Please let me know the exact business requirement in detail.
    Naveen

Maybe you are looking for