Manual failover solution for a custom proxy service that should be deployed

I am looking for a manual failover solution for a custom proxy service that should be deployed on a cluster as a pinned service (requests have to be executed one after the other). The constraints I am encountering are:
a) Proxy service are deployed to all cluster's members by default.
b) Configuration of proxy services to cope with migration of JMS ressources.
Any idea?
Thanks in advance for your support
Fred

hi leroy,
this is the OracleAS Portal Content Management forum. Please post your question in the Database forum
General Database Discussions
thanks,
christian

Similar Messages

Transport Solution for a Customer

Hello all, I would like to know which is the best solution for a customer that needs an: "end-to-end transport with a fixed amount of BW over my mpls network"
I have two POPs, and in each POP I have a customer CE. Basically this customer wants me to give him a link with a fixed bandwidth between this two sites over my mpls network, he doesnt care if I offer him a L2 or L3 connectivity model.
I was thinking about doing it with TE tunnel, but I would like to consult with you if this is the best solution. Thank you.
Regards,
Ernest

Hello,
TE tunnel is something used to use underutilized links for the sake of provider or fast rerouting of traffic for the sake of customer/provider.
Now regarding providing solution to customer, If customer wants only two links you have many options...like offering L2 vpn or L3 vpn.
What to offer depends upon below factors
> If customer is about to give more orders in future it is better to go for L3 vpn or VPLS (L2 solution with moder scalability)
> But if customer want more secure link with no future expansion L2 is best choice.
You can take more inputs from customer like what will be status of links in future, what security option he is ok with
If you run L3 VPN probably he will have to share his routing information.
hope this helps
Regards
Mahesh

Does Cisco offer a Predictive Dialer solution for SMB Customer?

We have a small business customer asking for predictive dialing functionality.
Does Cisco offer a Predictive Dialer solution for SMB Customer?

Cisco does not offer that. You check the solution that I wrote, on the website mentioned in my profile.

Install Oracle DB as service that should be started manually

Hi!
I have laptop computer (Windows Business Vista) with small main disk space and I would like to install Oracle DB on removable HDD (I have already many programms installed there; RAM is sufficienly large to accomodate them) and my plan is to install Oracle database 11g on HDD as service that should be started manually. Are there any installation options to do this in the right way or are there any configuration options that should be tuned after installation, is there stardad way recommended by Oracle how to do this?
I know that after installation I can configure any Windows service one by one (including OracleServiceXXX, OracleDBConsoleXXX, ...JobSceduler, ...TNSListener, etc.) that they should be started only manually, but is there any procedure recommded by Oracle how to do this? E.g. maybe I can miss some service that should be configured and so on.
And maybe the similar procedure is available of application servers and services of SOA Suite as well?
And when I will have Oracle installation with manual startup-shutdown configuration - how should I start and shutdown database. I am reading http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/start.htm and it says that I should issue only SQL statements for this - but as I understand - there should be some scripts that should be executed before those statements - at least - for startup of TNSListener. Is there some *.bat file suppled by Oracle for this?
Sorry for such questions, but they are asked by developer not administrator.
Thanks in advance!

Hi;
You can make installation to on your external HDD. If you want to service should be start manualy than you need to open services.msc and on related service > right click >properties >> startup type "manuel"
Regard
Helios

Custom wcf service that uses SharePoint Object Model.

Hi All,
I am writing a custom service on SharePoint. I have noticed most of the people do deploy the custom wcf service in layout folder in 12/14/15 hive. I am wondering is it mandatory? Can’t we deploy the custom wcf service that uses SharePoint Object Model as
virtual directory on a specific port?
Regards Restless Spirit

It is suggested to use WCF in 12/14/15 hive folder due to security and eas in use. Check below
http://www.dotnetcurry.com/showarticle.aspx?ID=760
http://msdn.microsoft.com/en-us/library/office/ff521584%28v=office.14%29.aspx
http://stackoverflow.com/questions/16008593/where-should-custom-wcf-service-for-sharepoint-2010-resides
If you want to use the server object model you have to host your WCF service on the same server as your SharePoint is installed on.
If the WCF service has to be on a different server you can use the client object model or the SharePoint webservices to communicate to SharePoint.
(link to a question about using server object model on different server
http://nikpatel.net/2012/02/29/step-by-step-building-custom-wcf-services-hosted-in-sharepoint-part-i/

Solution for Bug 13412084: RESTRICT PAYMENT: IT SHOULD NOT ALLOW PAYMENT BE

http://attiqahmed.wordpress.com/2012/03/20/solution-for-bug-13412084-restrict-payment-it-should-not-allow-payment-before-invoice-accrual/

hello sir Octavio
Im sorry.. I failed to tell you that our encoder of invoices is separate from the one who entry for payments.
Therefore, the encoder uses the invoices batches[(N) Invoices>Entry>Invoice Batches] whereas the Paymaster(the one who entered payments?) uses the Payments [Payments>Entry>Payments]
By the way your suggestion did work to disable the Pay in Full checkbox.. but i decided to get rid of the actions button for the encoder.. and another person will be handling the validation and create accounting having such access.
So what i wanted is that the paymaster wouldn't be able see among the LOV of invoices at the Payments Form if its not created accounting.
I wanna make sure that all invoices are created accounting.
thank you so much for the understanding..:-)
Emgee

OWSM Custom Assertion for OSB RESTful Proxy Service

Hello,
I have implemented a Custom OWSM Assertion to authenticate requests with a custom token placed in a HTTP header. I can assign this assertion to a SOAP proxy service as a security policy. However I am not able to assign the very same policy to a Restful JSON service (Proxy service defined as messaging service with text message type). I am getting this error:
[OSB Kernel:398128]One of the Web service policy attached is not allowed on service default/RESTful because the service binding does not support it
My policy:
<wsp:Policy xmlns="http://schemas.xmlsoap.org/ws/2004/09/policy"
    xmlns:custom="http://custom"
    orawsp:status="enabled"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" orawsp:category="security"
    orawsp:attachTo="binding.server" wsu:Id="http_customtoken_authentication_policy"
    xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
    wsp:Name="custom/http_customtoken_authentication_policy">
    <custom:customTokenHttpAuthentication
        orawsp:Silent="true" orawsp:Enforced="true"
        orawsp:name="Http custom token Authentication" orawsp:category="security/authentication" >
        <orawsp:bindings>
            <orawsp:Config orawsp:name="authenticationassertion"
                orawsp:configType="declarative">
                <orawsp:PropertySet orawsp:name="headerName">
                    <orawsp:Property orawsp:name="headerName"
                        orawsp:type="string" orawsp:contentType="constant">
                        <orawsp:Value>CustomToke</orawsp:Value>
                    </orawsp:Property>
                </orawsp:PropertySet>
            </orawsp:Config>
        </orawsp:bindings>
    </custom:customTokenHttpAuthentication>
</wsp:Policy>
My OSB version is OSB 11g PS6 and in this version, OWSM policies are supported for Restful services. Interesting is, that the built-in policy oracle/http_basic_auth_over_ssl_service_policy can be assigned to my Restful service. Do you know a solution for the problem, how can I assign my custom assertion to the Restful service? Anything special is needed in the policy definition?
Thanks.
Marian

Hi Vinoth,
The users/groups are picked up from the LDAP configured in Security Realms->myRealm->Providers
You basically have 2 options:
- You can configure your LDAP in Providers
- Use the DefaultAuthenticator that weblogic provides you by default.
If you do not want to configure an LDAP, and want to use weblogic's default, then all you have to do is add users and groups in Security Realms->myRealm->Users and Groups
Do mark this as useful or answered, if this has helped.

HADR Solution for SQL Server Analysis Services (SSAS) 2014 on Azure Iaas

Hi All
I am required to build a HA/DR solution for SQL Server and SSAS 2014 on Azure. So far I could build AlwaysOn high availability solution for SQL Server on Azure but haven't found any solution for SSAS.
Failover Clustering is not an option on azure because of the restriction of not been able to use shared storage. We also determined that the cost savings of using SQL + the cost of the 3rd Party replication tool was a wash (ie no real cost savings).
Any lead on this would be appreciated.
Thanks,
Viral Shah
Thanks - Viral

Hi Viral,
A clustered implementation of SSAS can be configured in Microsoft Azure. Such a configuration would need to meet all the requirements stated in the following document including Active Directory and storage.
How to Cluster SQL Server Analysis Services
http://download.microsoft.com/download/D/2/0/D20E1C5F-72EA-4505-9F26-FEF9550EFD44/SSAS_Failover_Cluster_V4.docx
Thanks,
Lydia Zhang

SSL Cert for 2008 R2 Reporting Services that is installed on a Failover Cluster - server address mismatch?

I utilized the idea from
http://www.mssqltips.com/sqlservertip/2778/how-to-add-reporting-services-to-an-existing-sql-server-clustered-instance/ to install 2008 R2 Reporting Services on a new Clustered SQL instance. In short, create the new Clustered SQL instance on Node1,
installing Reporting Services with it. Then on Node2, Add a Failover Cluster Node (without choosing Reporting Services); following that up with starting the SQL setup.exe with a cmd to bypass a check so that I can then install the Reporting Services
feature on Node2. It points out using the SQL Cluster Network name for connecting to Reporting Services.
I verified upon failover that I could still access the Reports and ReportServer URLs. However, when wanting to add an SSL certificate to the RS configuration, I run into the warning of "mismatched address - the security certificate presented by
this website was issued for a different website's address", where I can continue and get to the Reports or ReportManager URLs.
I played with different certs (internal CA created) and SANs and other things, but I still get this error with the cert. The Reports URL, for example, is <a href="https:///Reports">https://<SQLClusterNetworkName>/Reports, and the
cert has a CN and Friendly Name of SQLClusterNetworkName (with SAN of DNS: SQLClusterNetworkName.<domain>), but the error still happens.
What am I missing to eliminate the mismatched address warning when using the SQLClusterNetworkName as the base of the URLs?

I got it working by using the FQDN as the common name on the SSL cert, with FQDN in RS URLs.

SSO not working for a custom WDA application that runs in the Portal

I have a Portal system (Java stack, NW04s) that has an iView of type webDynpro ABAP. The custom Web Dynpro ABAP application resides on another system (ABAP stack, running ECC6). We have configured the trust relationship between the Portal and the ECC system as per
http://help.sap.com/saphelp_nw04s/helpdata/en/61/42897de269cf44b35f9395978cc9cb/content.htm
We know this is working since we are able to run ESS. However, for the custom WebDynpro ABAP application, when calling it for the first time, a logon screen shows up. How can we get rid of it? what are we missing to have SSO work for the custom WebDynpro application?

Please check this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d35bb690-0201-0010-988a-d669c8530518
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2f5e%2f6c85c3edf942f39349a1e337434d29%2fcontent.htm
Hope it helps.
Regards,
Mona

Custom Login Module that should check only userId with out passwd

Hi All,
Can we write a custom login module which should check user name in the HTTPHeader and let the user login if the user id exists in the userstore(Active Directory Server).
It should not validate with the passwd, as the requesting server sends only the user id in the HTtp Header.
Is it possible to do this ?if so can anyone give me some inouts. I know how to configure cutom login module. But i am not sure with out validating th epasswd we can let the user log in through custom login module.
can anyone send me sample code.
Thanks a lot
Lakshmi

Hi Lakshmi,
What describe the real issue you are trying to solve?
Regards
-Venkat Malempati

Failover solution for Sender File Adapter (FTP)

Hi guys,
I have a scenario FTP->Idoc. Is it possible within PI to create a functionality, that if a connection to one FTP fails, it will switch to another FTP?
Thank you,
Peter

Hi,
You may maintain two seperate Sender adapters with seperate FTP server and fix the polling interval to sequence the calling of file.
But if the file is available on both the FTP servers then there will be two calls always.
So you need to maintain the file in any one of the FTP server.
But this is just the manipulation, not the precise solution. You may go for BPM also
In communication channel there is no such feasibility. Probably you may need to go for customized adapter modules.
Thanks
swarup
Edited by: Swarup Sawant on Sep 2, 2008 11:42 AM

Need to understand a possible solution for my customer

Hello Experts , I am into a situation... I want to sell my customers zero clients with windows server running in background so they can save cost. For this I have suggested Ncomputing L300 Zero client which they like upto an extent but the problem is they
have 50 locations (outlets) and they dont want 50 local servers to be deployed. Please provide me some guidance or suggestions with better available solutions. I know one alternate is citrix but its too expensive.
Help would be much appreciated as I am in client country and totally blank now.
Thanks and Regards,
Pankul Jain.

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Need solution for mass exclusion of computers from IE 10 deployment

hey all,
hopefully I've got the right forum for this question.
I have to deploy IE 10 company-wide (about 1800 computers), but I need to exclude hundreds of computers because of an incompatibility with a web-based application.
we have a query-based collection in SCCM that we use for deploying updates company-wide, but we can't use this since I need to exclude computers from the deployment.
when I deployed IE 9 I ended up exporting the query results for this collection, then did a copy/paste of the results to a new collection, minus the computers that had to be excluded for the IE 9 deployment.
unfortunately, the IE 10 deployment has too many exclusions for this to be efficient.
so, I'm trying to figure out the best approach to this- any ideas/suggestions?
is there anything in SCCM (or a third party option) that can generate a list of computer names based on a list of AD user names? the user names list would be lengthy, close to 500.
I am using SCCM 2007 SP2.
thanks in advance for any help with this!

Hi,
I would try to use an exclude collection,
1. create a collection with all computers that are excluded from IE10, you can use whatever query you like, inventory e.t.c
2. create exclude rule in the collection used for deploying and excluding the collection above from the deployment.
No there is no builtin feature to convert a list of usernames to computernames, check Top Console user, that would be the best source of information.
Regards,
Jörgen
thanks for the response.
are there any third party options that can generate a list of computer names based on a list of AD user names?
manually adding hundreds of computer names to (or removing from) a collection really isn't an option.

Will there be a solution for the dock stereo systems that do not charge?

I have the JBL Radial and it will not charge the 3G...Before I buy a new one is there a solution to this???

Good question for JBL.
If a product does not include the "made for iPhone" designation, no.
Some products that don't include this may work with the first generation iPhone but not with the iPhone 3G.

Manual failover solution for a custom proxy service that should be deployed

Similar Messages

Maybe you are looking for