Manual feed tray 1 on printer HP 4015TN does not print unless I hit the OK button.

I have an HP 4015 Tn which was working fine up until 3-4 weeks ago. The problem is when I send a document to the manual-feed tray one, it flashes the "Attention" red indicator and I have to hit OK button on the printer for the document to print.My printer is setup for envelope, letterhead in tray 1, letter plain in tray 2 and legal in tray 3.My PC is a 64 bit running Windows 7 with the latest updates.Any suggestions in how to correct this problem will be greatly appreciated.Thank you

Hello l_j,  Welcome to the HP Forums.  I see that you're having an issue with blank pages when attempting to print with black ink. Please click on the following link that deals with Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 5520 and Deskjet Ink Advantage 5520 e-All-in-One Printer Series. If the troubleshooting does not help resolve your issue, I would then suggest contacting HP's Technical Support to see about further options for you. , : click here.  Thanks for your time. Cheers, 

Similar Messages

  • I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • Since the last upgrade, aol email does not download unless I touch the e-mail icon

    Since upgrading to 7.1.1 my email does not download unless I touch the e-mail icon.  This affects both the I-pad and the I-phone 5s

    I did the update on my iPad, but not on my phone and my AOL email hasn't been pushing to my phone or my iPad for the last couple of days. This started happening prior to me upgrading.  I hoped that it would at least help my iPad, but it hasn't.  Everything was fine until late Thurs or early Friday....May 1-May 2.  I called AOL yesterday, and they said that they would have upper level techs see if they can find out if it's a server problem, etc or anything else on their end, and get back to me.  Probably won't hear from them until Monday, at the earliest.  It happened very suddenly with my "push" nolonger working for me on both devices.

  • HT5509 In guided Access does not unlock when I Press the home button I need to run down the Battery and turn back on and it is then out off guided Access

    In guided Access does not unlock when I Press the home button I need to run down the Battery and turn back on and it is then out off guided Access

    How To Get Out Of Guided Access On iOS6? : TechNGuide
    SOS I cannot Exit Guided access: Apple Support Communities

  • Acrobat 9 bug? - Print Pages function does not print all bookmarked pages

    We use the Bookmark Print Pages function to allow for easy printing of sections of large PDFs. All of the pages that should be printed are bookmarked. The bookmarked pages print correctly in Adobe 8, but not in Adobe 9.
    I have put together a javascript workaround, but would prefer a solution that does not require distributing a file to all users.
    I would appreciate any suggestions on other possible workarounds.
    Here is the bug report I submitted to Adobe:
    Concise problem statement: The "Print Pages" function for bookmarks does not print all bookmarked pages in Adobe Reader 9.0 and 9.1. The same bookmarks print properly in Adobe Reader, Standard, and Pro 8.
    Steps to reproduce bug:
    1. Open the Adobe Acrobat SDK JavaScript for Acrobat API Reference PDF (Version 8.1, April 2007) in Adobe Reader 9.0 or 9.1.
    2. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
    3. Open the same PDF in Adobe Reader, Standard, or Pro 8. (I used Adobe Professional 8.1.3.)
    4. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
    Results and Expected results: Printing from v8 results in 12 pages. Printing from v9 results in 9 pages. Pages 741, 754, and 769 did not print from v9.

    I'm having the same issues.  Using the latest version 9.3.3.  Is this a bug? I tired calling adobe but their CR sounds like 3rd country only.  Anyone can shed a light on this issue?

  • MY printer officejet7​000 DOES NOT PRINT FULL A3 SIZE PAPER LIKE my prin cut for botam

    MY printer officejet7000 DOES NOT PRINT FULL A3 SIZE PAPER my print cut for botam & top side, Same printout give in my old model printer like k7108  this printer printour full printing, but I newly purchase printer not printour full a3 size print

    Those '''user_pref("print.printer_Artisan_837 ....''' preferences are what needs to be deleted, with Firefox closed.
    I think that "ding-dong" error sound might be due to an old print job stuck in the print cache, though. Open the Windows Control Panel > Printers and Faxes and check the '''Status''' for that printer.

  • Printer friendly output does not print region borders

    I am using theme 10 i have set up a printer friendly template which has a report region in it. The printer friendly page displays correctly on the monitor, but when i print the page the region borders are not printed. I only seem to get the corners of the region printing
    same thing with the region title only the sides of the border are printed.
    any suggestions as to why this is??

    Have figured it out...
    you have to set the following option in your browser.
    Tools > Internet Options > Advanced
    in the Printing section check the 'Print Background colors and images' box

  • Photosmart B010a All In One test print O: K: Does not print from the computer

    Egr: Sig. No error message in the control panel is READY, has printed the test. DO NOT print from your computer. HP Computer in 6220 with window 7/64 bit. = tiscali WI Fi network. the printer is connected with the cable to the computer. I also tried with Doctor. Please help me figure out where I went wrong; I installed the latest type of software and drivers available. Thank you, Regards Costanzo 
    photosmart All In One B010a  stampa di prova O:K: non stampa dal computer
    Egr: Sig. Nessun messaggio di errore nel pannello di controllo risulta PRONTA , ha stampato la prova. NON stampa dal computer. Computer HP a 6220 con window 7 /64 bit. rete = tiscali WI Fi . la stampante è collegata con il cavo al computer . Ho provato anche con  Doctor . Per favore aiutatemi a capire dove ho sbagliato  ; ho installato l'ultimo tipo di software e driver disponibile . Grazie, Distinti Saluti Costanzo 
    This question was solved.
    View Solution.

    try to connect the printer with your laptop with USB connection.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work on behalf of HP.

  • My display preferences does not show detect displays or the arrangement button

    I have a late 2011 macbookpro (15") running OSX 10.8.2 (mt. lion).  My display preferences screen does not have the arrangements button or the button to detect displays. Is this a bug in mt. lion?  How do I fix this?  I want to use my hdtv (samsung 32") as a second display.

    Hi John,
    Thanks for your reply and update and for going through that article. I'm glad to hear the issues have partially resolved. For the continued issues, particularly the performance issues with the MacBook, it sounds like a different direction may be warranted.  Due to the nature of that issue you may find more information by using another one of Apple's support resources:
    http://www.apple.com/support/contact/
    Take care,
    - Ari

  • MacBook does not startup unless I reset the PRAM.

    Several times now I have turned on my MacBook and been greeted by a dead, blue screen. The computer does not load Mac OS X from this state. If I reset the PRAM (by forcing a shutdown and then holding CMDOPT+PR when the computer turns on) Mac OS X loads. Why does this happen?
    I have made some modifications to the computer that may have influenced its performance.
    1. Upgraded to 2GB RAM.
    2. Uninstalled extra languages using the program Monolingual.
    3. Disabled Dashboard.
    4. Disabled Spotlight.
    5. Disabled Journaling on my harddrive.
    6. Repaired disk permissions.
    7. Cleared logs and caches and ran Cron Scripts using the program Ultimate Task.

    I think I have some other information, or hypotheses which i'd love other users to share information on.
    I notice, that when i have this problem, that in System Preferences/Startup Disk that the MAC OS X system is not selected/highlighted.
    Also, I was thinking, perhaps this is due to having bootcamp/windows installed ?
    So 2 questions:
    Do users experiencing this problem have Bootcamp installed with a windows system on their mac
    and
    After getting the dark grey screen and starting up (by resetting PRAM), does the System Preferences/Startup Disk that the MAC OS X system is not selected/highlighted ?
    If this is the case, I guess we have a bit more information to go by...
    If users that are experiencing this issue do not have bootcamp installed, then at least we can rule out bootcamp (since it is a beta).
    If users are reporting the same nonselection of the system volume in system preferences, then at least we're talking about the same problem.

  • JMenu Bar does not show unless I resize the window

    Hi, I have just a simple problem. I am trying to just have a blank JFrame with a JMenuBar at the top with the JMenu "File". I have the following code, but once I run the application it is just a blank frame with no Menus. Once I grab the frame and resize it with the mouse, it appears. What do I need to do to have the menu bar be shown once the application runs?
    import javax.swing.*;
    import java.awt.*;
    class ProgramWindow extends JFrame
    private JMenuBar jmb = new JMenuBar();
    private JMenu file = new JMenu("File");
    public ProgramWindow()
    setSize(300, 300);
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    setVisible(true);
    setJMenuBar(jmb);
    jmb.add(fileMenu);
    Container c = getContentPane();
    c.setBackground(Color.lightGray);
    c.setLayout(new BorderLayout());
    setConentPane(c);
    public class Program
    public static void main (String[] args)
    ProgramWindow pw = new ProgramWindow();
    }

    Normally you poop up and decorate frames/dialogs before you set them
    visible. Otherwise you have to revalidate() them after you' ve added
    some components to them. (resizing them does that for you as you have
    noticed).
    kind regards,
    Jos

  • Menu does not display unless I hit play??

    I built a simple DVD.
    STILL image menu with one button.
    The MENU is set as "first play"
    When I test with Simulate- everything is fine. The Menu shows up. The button starts the program.
    Once I burn and try to play back the disc- My dvd player on mac comes up BLACK screen.
    No menu.
    I have to hit the play button to get the menu to play.
    What is going on?
    I usually do not use a menu. I normally just select track as first play and it always works fine.
    This client wants a menu.
    I need the menu to automatically pop up and play once the disc is put into the player.
    Again- this works as it should in the Simulate.

    Are you using a Sony DVD player by any chance. I am and I havde ther same problem, except I don;'t get first play tracks playing by themselves. I thik this may be an insoluble Sony /DVDSP thing.

  • Screen does not refresh unless i move the mouse

    I have a samsung screen plugged into my laptop via VGA cable.
    When I am browsing the screen seems to hang unless I constantly jiggle the mouse. If my mouse is back on the laptop screen, the screen freezes until the mouse comes back over to the other screen

    I noticed this behaviour after upgrading Firefox 4 to Firefox 5.
    I resolved this problem by checking my Add-Ons.
    One add-on was invalid with Firefox 5 and I just uninstalled that and my other add-ons (except FireBug) and everything was good again!

  • Photosmart c6180 does not print the page what i want

    i have photosmart hp c6180 and it is connected to my wireless laptop the problem is when i try to print some it does not print the same page but it prints some weired pages and keep printing but still does not print what i want. please help me on this issue i would really appreciate. thanks

    Have you tried deleting the printer and reinstalling?  At least you are getting the printer to do something.  My print job just gets hung up in queue.

Maybe you are looking for