Manual for Wind barebone system
I'm thinking about buying an MSI barebones system from Newegg. MSI doesn't seem to offer user manuals for the barebones machines on their website. If anyone can offer a manual for the system or particularly the mobo, I'd appreciate it. Thanks.
Why do you need a manual, there isn't much to be added.
Memory, Harddisk and DVD...done.
Similar Messages
-
Not able to install Windows 8.1 Update for x64-based Systems (KB2919355)
My laptop is dell vostro 1014.I have upgraded my laptop to windows 8.1 pro.I am not able to install Windows 8.1 Update for x64-based Systems (KB2919355)I got the following errors from windows event viewer:
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB2964444) without KB2919355.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Windows 8.1 Update for x64-based Systems (KB2919355).
Anyone knows how to fix this error?
If I run the Reset Windows Update Components, I get this:Hi,
Considering that the security app or third part service may block the installation, please try the clean boot to install this update manually:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue still persists, please upload the cbs.log under
%WinDir%\Logs\CBS\CBS.log into Onedrive or similar network drive and share the link here.
Kate Li
TechNet Community Support -
Open Interface manual for HRMS
Hi,
Where can I get open interface manual for oracle HRMS.
Regards,
SohamSoham,
Can you be more specific in what you want. Oracle HRMS supports a very broad, diverse range of data that can very significantly from one customer to another. There are seeded interfaces in HRMS along with extract tools and supported APIs. See the following for a starting point:
Note: 368845.1 - Oracle Generic Third Party Payroll Backfeed and bfexampl.xls
Note: 228527.1 - Web ADI for Oracle HRMS Implementation and Configuration
Note: 358187.1 - Integration Guide for Oracle Human Resources Release 11i and Ceridian Source 500
Note: 358184.1 - Integration Guide for Oracle Human Resources Release 11i and ADP
Note: 216838.1 - Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation)
Note: 226744.1 - Cash Management Payroll Integration Release 11i
Note: 367395.1 - System Extract Focus Area
Note: 227537.1 - Windstar International Tax Navigator Interface Version 12
Note: 227482.1 - Payment of Child Support Through Electronic Funds Transfer (EFT)
Release 11.03 & 11i
Regards,
Greg -
I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack
Hi,
I could resolve the issue since there were lot of issues after system copy.
1. During distribued to Cenrtal system - system copy.
You need to combine both DB and CI export copies in one folder during which one thing can happen.
SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
I eliminated this issue also.
After JAVA started I faced an issue with XI related navigations.
ecchangeProfile url still had an entry of Production System. This may be a bug.
After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
Now I can access all the XI related navigations.
I need to also perfrom SGEN and Profiles import.
Do I need to change any additional settings after this so that my production and DR can work without any issue?
Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
Regards,
Rajkumar -
Service for network file system fails to install
Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
Click on the Roles node in the left pane, and then click the
Add Roles link.
On the Add Roles Wizard welcome page, click Next to continue.
From the list of roles to install, select File Services, and click
Next to continue.
On the Introduction to File Services page, click Next to continue.
On the Select Role Services page, keep the File Server box checked and select
Services for Network File System. Click Next to continue.
On the Confirmation page, review the settings and click the Install button.
Click Close when the wizard completes.
ServerManager Log:
From the ServerManager.log file under C:/Windows/Logs I can see the below.
2272: 2013-02-12 16:13:51.479 [CBS] IsCacheStillGood: True.
2272: 2013-02-12 16:14:05.534 [Provider] System changed since last refresh: False
2272: 2013-02-12 16:15:45.816 [InstallationProgressPage] Loading progress page...
2272: 2013-02-12 16:15:45.831 [InstallationProgressPage] Begining Sync operation...
2272: 2013-02-12 16:15:45.842 [Sync]
Sync Graph of changed nodes
==========
name : File Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : File Server
guest[2] : Distributed File System
guest[3] : File Server Resource Manager
guest[4] : Services for Network File System
guest[5] : Single Instance Storage
guest[6] : Windows Search Service
guest[7] : Windows Server 2003 File Services
guest[8] : BranchCache for network files
provider : FileServerRoleProvider
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
name : File Server
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
2272: 2013-02-12 16:15:45.842 [Sync] Calling sync provider of Services for Network File System ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'Services for Network File System'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'Services for Network File System'.
2272: 2013-02-12 16:15:45.843 [Sync] Calling sync provider of File Server ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'File Server', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'File Server'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'File Server', updateElement: 'CoreFileServer'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'File Server'.
2272: 2013-02-12 16:15:45.844 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
2272: 2013-02-12 16:15:46.315 [CBS] ...parents that will be auto-installed: '<none>'
2272: 2013-02-12 16:15:46.316 [CBS] ...default children to turn-off: '<none>'
2272: 2013-02-12 16:15:46.325 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p:
Staged, a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.325 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to
'InstallRequested'
2272: 2013-02-12 16:15:46.335 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.336 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.345 [CBS] ...current state of 'NFS-Administration': p: Staged, a:
Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.345 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
2272: 2013-02-12 16:15:46.354 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.354 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.363 [CBS] ...current state of 'CoreFileServer': p: Staged, a: Staged,
s: UninstallRequested
2272: 2013-02-12 16:15:46.363 [CBS] ...setting state of 'CoreFileServer' to 'InstallRequested'
2272: 2013-02-12 16:15:46.373 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
2272: 2013-02-12 16:15:46.390 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.408 [CBS] ...'NFS-Administration' : applicability: Applicable
2272: 2013-02-12 16:15:46.426 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.435 [CBS] ...'CoreFileServer' : applicability: Applicable
2272: 2013-02-12 16:15:46.493 [CbsUIHandler] Initiate:
2272: 2013-02-12 16:15:46.494 [InstallationProgressPage] Installing...
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Error: -2147021879 :
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Terminate:
2272: 2013-02-12 16:15:52.035 [InstallationProgressPage] Verifying installation...
2272: 2013-02-12 16:15:52.049 [CBS] ...done installing 'ServicesForNFS-ServerAndClient
ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
Status: -2147021879 (80070bc9)
2272: 2013-02-12 16:15:52.052 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
2272: 2013-02-12 16:15:52.053 [FileServer] Skipped configuration of 'File Server' because install operation failed.
2272: 2013-02-12 16:15:52.053 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Services for Network File System',
'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
[STAT] Configuration(s) took '0.0002143' second(s) total.
[STAT] Total time: '6.206078' second(s).
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Sync operation completed
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Performing post install/uninstall discovery...
2272: 2013-02-12 16:15:52.056 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2272: 2013-02-12 16:15:52.056 [CBS] IsCacheStillGood: False.
2272: 2013-02-12 16:15:52.526 [CBS] >>>GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
80070bc9 (-2147021879)
2272: 2013-02-12 16:15:59.342 [CBS] <<<GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.380 [DISCOVERY] hr: -2147021879 -> reboot required.
2272: 2013-02-12 16:15:59.390 [InstallationProgressPage] About to load finish page...
2272: 2013-02-12 16:15:59.390 [InstallationFinishPage] Loading finish page
2272: 2013-02-12 16:15:59.401 [InstallationFinishPage] Finish page loaded
In Windows Event long I can see the following events logged:
Event 3002, Port Map:
Windows(R) failed a request to register RPC Port Mapper on TCP port 111. RPC Port Mapper cannot start.
Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers. Without RPC Port Mapper, Server for NFS
cannot start and NFS clients cannot access files on this server.
Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
Event 7000, Service Control Manager:
The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
The dependency service or group failed to start.
Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
Dependent Service Status:
During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
“31 (0x1f)”. Please find below the query result.
C:\Users\CMMAdmin>sc query rpcxdr
SERVICE_NAME: rpcxdr
TYPE : 1 KERNEL_DRIVER
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query msnfsflt
SERVICE_NAME: msnfsflt
TYPE : 2 FILE_SYSTEM_DRIVER
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query portmap
SERVICE_NAME: portmap
TYPE : 1 KERNEL_DRIVER
STATE : 1 STOPPED
WIN32_EXIT_CODE : 31 (0x1f)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>
As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
Please let me know if you have any suggestion on how debug this issue further.
Thanks
-PoopeshHey,
I had this same problem running MS Server 2008 R2 and server log is as follow:
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
ant. : empty
pred. : File Services
provider : FileServerRoleProvider
5676: 2014-01-14 14:08:57.474 [Sync] Calling sync provider of Services for Network File System ...
5676: 2014-01-14 14:08:57.521 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
5676: 2014-01-14 14:08:57.536 [FileServer] Begin installation of 'Services for Network File System'...
5676: 2014-01-14 14:08:57.536 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
5676: 2014-01-14 14:08:57.536 [FileServer] Installation queued for 'Services for Network File System'.
5676: 2014-01-14 14:08:57.536 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure ' ...
5676: 2014-01-14 14:09:00.173 [CBS] ...parents that will be auto-installed: '<none>'
5676: 2014-01-14 14:09:00.173 [CBS] ...default children to turn-off: '<none>'
5676: 2014-01-14 14:09:00.204 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.204 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
5676: 2014-01-14 14:09:00.235 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.235 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.266 [CBS] ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.266 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
5676: 2014-01-14 14:09:00.282 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.282 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.313 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
5676: 2014-01-14 14:09:00.360 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:00.422 [CBS] ...'NFS-Administration' : applicability: Applicable
5676: 2014-01-14 14:09:00.469 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:01.624 [CbsUIHandler] Initiate:
5676: 2014-01-14 14:09:01.624 [InstallationProgressPage] Installing...
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Error: -2147021879 :
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Terminate:
5676: 2014-01-14 14:09:41.170 [InstallationProgressPage] Verifying installation...
5676: 2014-01-14 14:09:41.264 [CBS] ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
5676: 2014-01-14 14:09:41.279 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
5676: 2014-01-14 14:09:41.279 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
[STAT] Configuration(s) took '0.0062843' second(s) total.
[STAT] Total time: '43.7431429' second(s).
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Sync operation completed
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Performing post install/uninstall discovery...
5676: 2014-01-14 14:09:41.295 [Provider] C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
5676: 2014-01-14 14:09:41.295 [CBS] IsCacheStillGood: False.
5676: 2014-01-14 14:09:43.900 [CBS] >>>GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
5676: 2014-01-14 14:09:57.410 [CBS] <<<GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.488 [DISCOVERY] hr: -2147021879 -> reboot required.
5676: 2014-01-14 14:09:57.613 [InstallationProgressPage] About to load finish page...
5676: 2014-01-14 14:09:57.628 [InstallationFinishPage] Loading finish page
5676: 2014-01-14 14:09:57.644 [InstallationFinishPage] Finish page loaded
My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
Have a good one! -
Automatic Conversion of PR to PO.. Need User Manual for ME59 T code
Hai Sap Gurus,
I Got the following content from net. but kindly help me by sending me user manual for ME59.
You created purchase requisition for various material. During creation of purchase order you used the following path:
Purchase Requisition
.......Follow on function
.........Create Purchase Order
............automatic via purReq.
When you mentioned required purchase requisition number and execute, system give error that purchase requisition does not contain any suitable item.
Is there any setting in customization where you can monitor and use that function.
In an effort for you to successfully use the Transaction Code ME59 to automatically convert the current PR into PO, then the following criteria should be met:
1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked;
2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked;
3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO;
4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
or
it might be PR subject to release strategy and not yet released
or
If you're not using a source list or automatic creation of PO, you may need to assign the requisition to a purchase information record using transaction ME56. Then it should appear in ME58
Thanks.. Reply me pls...
Edited by: Swetha SAP Girl on Jun 18, 2009 2:19 PMHi,
Step by step process for automatic PO creation from PR
1. Tick check box in purchasing view of Material Master(MM01/MM02)
2. Tick check box for auto PO in purchaisng data of Vendor Master record (MK02)
3. Maintain Source list for Material,plant and Vendor combination in ME01
4. In ME51N create PR and assign source of supply in "Source of supply" tab
5. In ME59N key in Purchaisng Org., Vendor and Plant - execute
You will get POs created with reference to PR automatically.
Hope its clear
Regards,
Uzair Hussain -
Creating DataSources for File Source Systems in csv format in sap bw 7.0
Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AMStep 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM IO_MATNAME
MAT001 TEA
MAT002 COFFEE
MAT003 SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!! -
Integration directory : select IDOC interface for WAS business system
Hi,
While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
In the SLD this component is correctly listed for that WAS .
If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
"Message Interface does not exist in any software components installed on this business system "
Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
Any ideas
( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
rgds
DirkHi Bavesh,
Yes, It's correctly listed. I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
rgds
Dirk -
As far as I can tell, there is no official printed manual for the X31. Instead, there is a very short 'quickstart' type document (which BTW, does not tell one how to undock) and the statement that the documentation is part of the help system (whose contents can be downloaded if needed).
I find this a big pain and not very useful in such a format. Is there hidden away somewhere a printable manual for the X31 either official or unofficial?
Thanks in advance.
RichHello 44Edward
Welcome to the Sony Community.
The community here is for Sony Consumer electronics and Sony VAIO tech support. We do not provide support for Aiwa products. I suggest that you contact Aiwa support for assistance with the issue with your Aiwa stereo system.
Thank you for your post. -
Manual for AIWA FD-N939YU AIWA A-3099922
looking for a manual for AIWA A-3099922 - its a deck sysem with CD, Tape,Receiver and Equalizer - used for dubbing radio shows - other indicating features is : PMN5B14
I just found the real model number - AIWA FD-N939YU for the table top unit; my problem is that I can not set the tuner channels; the ldc screen on the tuner is so faint that I can not see it other then when it is in the dark. There doesn't seem to be buttons for me to push to set the tuner on the deck nor on the remote. How do I set the tuner - I know I had done it before _ does this deck have a battery that needs to be replaced?Hello 44Edward
Welcome to the Sony Community.
The community here is for Sony Consumer electronics and Sony VAIO tech support. We do not provide support for Aiwa products. I suggest that you contact Aiwa support for assistance with the issue with your Aiwa stereo system.
Thank you for your post. -
Manual for CSM-Q87M-E43 ?
Where is the Manual for www msi com/product/mb/CSM-Q87M-E43.html ?
And why is "www msi com" a "not allowed" external link?The manual is not offered for public download as it seems. Maybe that's because it is rather a business product than meant for home use. In any case what you want is theoretical possible (even in dual channel) but way not recommended. Mixing different memory is like asking for for problems. In worst case you are ending up with a black screen and a non working system. To ensure stability (especially for corporate use) and prevent sudden errors or loss of data use matched kits of sticks with identical sizes. Best would be a kit of 2*8G (=16GB) if you need more than 8GB.
If you want to ask MSI for the manual (but which wouldn't help you with your question anyway): >>How to contact MSI.<< -
I want the specification manual for NI PXIe 5611
i want the specification manual for NI PXIe 5611
You can adjust the PXI-5610 IF input signal to fall between 15-35 MHz. The IF input range of the PXI-5610 cannot be changed from this 15-35 MHz span.
The PXI-5610 would be controlled via calls to the NI-RFSG instrument driver for NI's RF signal generator products.
There is no PXI-5610 only manual. The PXI-5610 is part of NI's PXI-5670, 5671, and 5672 2.7 GHz RF signal generators, whose manuals are available here:
http://sine.ni.com/nips/cds/nisearchservlet?nistype=psrelcon&nid=13478&lang=en&q=FQL:%28%28nilangs:e...
Regards,
Andy Hinde
RF Systems Engineer
National Instruments -
Where can I find instructions or manual for using Premier elements 12?
Looking for instructions or manual for using Premier Elements 12. Has Photoshope Elements 7 and Premier Elements 7. I had saved projects which I now cannot retrieve into the 12 versions.
bone
I have Photoshop Elements 7 and Premiere Elements 7 on Windows 7 Professional SP1 64 bit as well as on Windows 8 64 bit. All is well.
With your Photoshop Elements 7 your Windows 7, what do the Performance numbers look like under Full Editor, Edit Menu/Preferences/Performance?
My Windows 7 64 bit has the Windows XP compatibility mode. Due to the results from some of my recent maneuvers, I wonder about your thoughts of installing Photoshop Elements 7 on the Windows XP Mode side and gaining access to it from the Windows 7 side. You may loss the integration perks of Photoshop Elements 7 and Premiere Elements 7 since they technically will be on different operating systems.
I will explain next time if necessary how that type of idea backfired on me recently with my long standing problem of trying to get Photoshop Elements 12 Full Editor to open in my Windows 7 64 bit desktop.
More later.
ATR -
How to change R/3 System ID & Client values for a Business System in ID
I am a beginner in PI or XI. I am trying to modify R/3 System ID & Client# under Adapter Specific Identifiers of a Business System in ID. But both are in output mode and I tried to modify in SLD and then resynch at ID level, but I could not find a place where these parameters are specified for that Business System in SLD.
Please help me!I have a Client 500 and R3 Server EN3 now these two things were already there on a Business System, but Admn did some thing on my test system and now we have another Business System pointing to TS of type WEBAS-ABAP and Admin assigned this same client 500 and EN3 server name in SLD to this new Business system, but as you know these changes will not reflect in my ID scenario automatically unless we do it manually with synchronization button under Adapter Specific Identifiers.
So my requirement is now to remove those values from the old BS and keep them or get them through synch for my new BS in my ID scenario, which I am not able to do it. The new BS is pointing to WEBAS-ABAP type TS but the old one I think it is now not pointing to any TS any more, it just left like a orphan with no technical System, I think Admn did some magic with bad practice, I believe.
HOw do I handle this situation? -
Compliance Calibrator for multiple SAP systems
I was wondering if anyone could assist me with my query. We are currently performing an implementation of Virsa CC for a client and have begun to configure a CC DEV system they have installed with their custom SoD rule set. The DEV CC system (sitting on a stand alone NetWeaver box) is "connected" to four SAP systems (DEV, QA, HR DEV & HR QA). When we are building "functions" (i.e. raise purchase orders) in CC it asks us to define a SAP system when we are entering the transaction codes. We've been configuring the functions with SAP DEV as the system, however when we run the analysis of results we would like to get results from QA as well. It appears that the risk analysis only works for the system that you have defined the functions in (i.e. we get results for users in DEV but not for users in QA).
My questions are as follows:
- Do you need to define all the systems you wish to run a risk analysis for within the function (i.e. function = Raise purchase orders. DEV ME21 & QA ME21)?
- If so, is there an easy way to convert our functions so that they point to QA as well (we've noticed that we can't edit the SAP system once the function is saved)?
- Is it possible to export the functions and then define the SAP system when importing them back into CC (we've noticed with the SAP delivered rule set that SAP DEV was automatically defaulted)? This is particularly relevant as we would like to export the rules from the DEV CC system and import them to the PROD CC system without having to manually create the rule set again; and
- Is it possible to export the rules and manually change the SAP system reference and import them back into CC (i.e. do a "replace all" DEV to QA)?
Any help would be greatly appreciated.
Thanks,
AlexiIn order to perform what your are trying to do in CC 5.2, you will need to go to configuration and setup a logical system, such as SAP R/3 and define all the appropriate systems for the logical system. Then, when modifying the functions, you will need to set the tcode (action) to the logical system defined, such as R/3 or APO, etc.
The cross-system functionality only comes into play if you want to analyze the SOD where a conflict would occur if a user had access to one function in one system (for example - purchase order processing in APO) and a conflicting function in a different system (for example - Vendor Master in R/3).
If you simply want to check who has violates a risk against multiple system - the logical system is the best way. You can have an logical system by system type - R/3, BW, APO, SRM, etc.
To convert this over, you can export the rules and during the export you have to define the new system when exporting the file. If that doesn't work, I'd just delete everything out, and use the upload files to reload the rules with the correct data.
Maybe you are looking for
-
Some fonts (Symbol, for ex.) do not render
When I set the font of some text to some fonts like Symbol, or Apple Symbols, for example, the text is not rendered using these fonts. Instead it looks like the default Helvetica font is used. The Symbol and Apple Symbols fonts I have on my system ar
-
I want to use maps in jsf?its not working help needed
Hi i am trying to use map and area in jsf. i added the tablib demo/coponenets but it says <d:map> is unknown tag do i need to add any jar file for making it work please guide me thanks in advance.
-
Hi experts, I'm trying to stop the authentication retry for the guests. They won't have the credential to be authorzied and will be put in the guest VLAN. However the switch seems by default always retries the authentication every 15 seconds or so. I
-
Model and Metadata JCo Destination Config in WD
Hi! I just want to ask or verify if this is a correct JCo setup: Logical System Name: WD_APT_MODELDATA_UIP_GDC Model Instance Logical System Name: WD_APT_METADATA_GDC Thanks!
-
Starting local J2EE engine from SAP MMC
I am trying to start my local J2EE engine using SAP MMC. However, when I select the start option, the DB no longer starts automatically. I can manually start the DB, select start, and the engine will start. Previously, I could select start and ev