Manual gas Adjustment

Hi,
I want to do manual adjustment in GAS consumption and amount.
What are all the transaction that I can use for this?
How are Adjustments stored in SAP tables?
Can I identify which adjustment is a manual one?
thanks in advance

While entering the meter reading result you can enter the desired consumption. This need not be in line with the meter reading itself.
I guess your second question regarding entering manual amount, the closest option I can think of is to create manula bill

Similar Messages

Passing manual journal adjustment to retained earnings is possible?

Hi all
Please let me know do manual journal adjustment to Retained earning account is possible? Will this journal entry will create an issue while open the period of next year?
User wish to pass adjustment b/w retained earnings & owners equity account.
Please advice. Thanks
Regards
Sridevi

Hi:
SAP does not recommend manual posting to RE Account . In order to have effects in RE please open the previous fiscal year (if the entry or an adjustment pertains to closed fiscal year). Post the normal entry which should have been passed under normal circumstances. Please note that entry should be posted in special period of closed fiscal year. Having posted the entry execute FAGLGVTR , this will now carry forward an adjusted RE balance.
Hope this will help you.
Regards

Does the Z1 have manual exposure adjustment when recording videos?

Looked all over the internet but can't find an answer to this question. When recording videos with the Z1, is it possible to manually increase the exposure by way of a slider (usually a range of -2 to +2)? I know there's an option to choose spot/centre weighted etc, but can this variable by set in advance with a slider? I film a lot of indoor videos that often end up completely underexposed when left in auto mode, therefore manual override is a must for me.
If not, does anyone know of any third party camera apps that add this functionality?
Solved!
Go to Solution.

On mine, running Android 4.4.2, before recording I can do it using the row of icons on the left. Make sure 'SCN' in the top left corner ('scene', in other words) is set to 'off'. This is like selecting 'manual' rather than one of the automatic, scene dependant, modes and it opens up the use of the next settings icon below it, the one that looks like 3 sliders, which would otherwise be 'greyed out'. So now that it's white you can tap it, go in, and manually select your 'white balance' setting (I use 'auto') and also the slider that you mentioned that goes from +2 to - 2. The slider in this case is labelled as 'EV'. Did this help?

Bw is not picking up manual entries done in sap

Hi ,
Can any one guide me on this.
for copa we are getting data from 3 datasource for one cube.
z_1_copa_510_Act
0ec_pca_3
Z_1_COPA_510_PLAN
What happens if somebody did the manual entry(adjustment against something)in sap.(So BW didn't pick up units because there were no System in R3.) These data source is not picking the value.
What could be the reason?
Edited by: naman shah on Oct 24, 2008 4:37 PM

okay
and is this journal entry in the PCA tables for example
ie got to FB03 on the journal and do enviroment - doc enviroment - accounting documents - and is there a profit centre document and COPA documetn there?
ANd then does those documents exist on the base R3 tables ie GLPCA
I have 1000000 manual entries in SAP each day in FI and PCA and they do come into BW - so... some more detailed information abotu exactly the problem and examples may be helpful

Possible to Adjust Airplay Lag to Sync Multiple Airplay Speakers?

When playing to 2 different ATV2s, my iTunes music is not in sync between two sets of speakers. Is there anyway to adjust the lag time to one of the ATVs?
Here is my setup:
- Living Room - one ATV2 hooked up to my TV via HDMI, with powered speakers hooked up to my TV's audio output;
- Bedroom - one ATV2 hooked up directly to powered speakers (only used for music).
After reading through the forums, I am fairly certain the sync problem is due to the extra time my TV takes to process the audio signal before outputting the audio to the connected speakers. But what I have not been able to find is a solution to this problem. Basically what I need to do is delay the signal to the bedroom ATV maybe 0.5 seconds. Are there any 3rd party applications that can fix this? Will Apple ever release a solution?

I just found something out about the Rogue Amoeba software Airfoil on another thread here. People are complaining that there is something wrong with the Pioneer recievers (my reciever as well) as this is where they experience the delay. I don't think they understand that the reciever, like your TV, is processing the signal before it outputs it to the speakers as opposed to basic powered speakers that just shoot the signal out. Anyway the aforementioned software has an option to delay the signal of the individual airplay devices. I have used this software before and it has given me fits with much more severe sync issues in the past, but that was years ago now, so maybe they have fixed that. I haven't tried it recently. Anyhow, here are the instructions I found for individually syncing the devices using the Rogue Amoeba Airfoil;
We do offer a manual sync adjustment, as a debugging tool, in Airfoil. Please note that this is not supported for everyday use - on a network which is functioning properly, it shouldn't be needed at all. That said, you can try it if you like.
To enable the sync adjustment, follow these steps:
1) Quit and re-launch Airfoil while holding down the option key. This will bring up the debugging window.
2) Turn the Sync Adjustment debugger to On, and click Done.
Now each remote speaker will have an additional slider below the volume slider - that's the sync adjustment. The center is 0 offset, and the ends are +/-1 second. Adjustments only take effect when connecting, so if you're experimenting with it, you'll need to disconnect, adjust, and then reconnect to see how well it worked.
Airfoil will remember your adjustments after you quit, even if you turn Sync Adjustment off. (All that does is enable/disable the GUI, not the adjustment settings.)

Do manually entered metadata become lost/overwritten when transferring my library to a new external hd?

will manually entered/adjusted album and song metadata become lost/overwritten when i transfer my itunes library to a new external hd?... assuming that i follow apple protocal for the procedure? i'm nervous about losing all those minute adjustments i have made over time to my library's music!
any assurance would be GREATLY appreciated!
cheers

If you follow Apple protocol to the tee you should be fine...that being said, I've never had a perfect experience when moving my library. I recently followed this: http://support.apple.com/kb/ht1449 and for the most part the outcome was exactly I had hoped for. In my case, I moved about 80,000 pieces of music from one external HD to a second external HD. I did it all from within iTunes and everything seemed to work. When I compared my source and destination folders however, there were about a thousand files that didn't show up on the destination disk.
The files that didn't come across weren't recognized by iTunes, even though they were MP3 files. After some research I learned that iTunes is particular about certain tags that it doesn't like. I'm still working on the issue and actually have an open question on it which I wrote yesterday if you care to see.
I don't know if I was that much help but I will say that by following the instructions referenced above, I had a very good transition considering the number of files involved.
Good luck,
JB

Credit note adjustment

Hi Expert,
Can u please suggest any work around/ option for following scenario.
Scenario -
Retailer purchased 10 Nikon DSLR camera @ 1000 USD each.
Over the period he sold 5 cameras, Nikon came up with price reduction as they launch new model. So now camera price is 800 for retailer, instead of credit note for 1000 USD Nikon will give other accessories worth 1000 USD .
But if retailer will sell these camera @ 900 USD then in systm, it will be treated as loss.
Is thr any option where we can link the Credit Note in kind with Item price??
thanks in advance
Regards,
Lim

You will need to make a manual price adjustment to the items by using stock revaluation to bring down the item cost of these items.
Do a Goods Receipt to bring the other replacement items into stock at their value.
You can change the GL account this will hit in the document so the two offset each other in the GL account

Database adjustment for custom table with 200 entries

Hi,
We have a custom table which as 3 fields as composite primary key. we want to drop the last field from composite primiary key. Would it be required to do a manual database adjustment or would it automatically adjust the database if I make this change and trasport it.
Please advise.
Regards
Kasi

Hi,
    you have to adjust database manually using
    se11-utilities-database utiity-> click on
    activate and adjust database button .
    if you have table mainitainence defined delete
    existing table mainitainence and create a
    new mainitainence and assign this to request.
    so that when request is transported
    correction to databse are made in quality
    and production as well.
    select standrad recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    to request.
Regards
Amole

Expanded EXIF info in iPhoto '11- like which camera setting was used, manual or automatic?

didn't iphoto '09 indicate what setting the camera was on in the EXIF information? iphoto '11 seems kind of skimpy. Am I mssing something or should I use different software?

Thank you Terence. I'm learning to use my DSLR camera using manual settings. I take the same photo in automatic, then in different manual settings, adjusting shutter, sperture and ISO. Before I downloaded iPhoto '11 and Lion OS X, 10.7.3, I could see all EXIF information with the inclusion of whether the camera was set on manual or automatic. If you're sure iPhoto never provided this, maybe I was using Picasa or something else. I'm pretty much an iPhoto user, tho.

SPAM : next action - Perform Adjustment

Dear All,
I am applying SAP-HR support pack SAPKE47080 on my SAP R/3 4.7. I am getting " Perform Adjustment " as a next action.
Import phase 'RUN_SPDD_?' (17.02.2009, 21:55:07)
Manual modification adjustment is neccessary
Interrupt the import for execution of manual actions (17.02.2009, 21:55:07)
This is the log entry of SPAM. I am unaware of this .
plz suggest what should i do ?
Thanks in advance.
Ankit Gupta

Someone (maybe you) adjusted a table or other dictionary objects - you have to check and adapt all those that they appear "green" again.
When done, go back to SPAM and continue SP application.
http://help.sap.com/saphelp_nw70/helpdata/EN/2e/6d66587d9011d396b60000e82de14a/frameset.htm
Markus

Manual Revaluation

Hi,
Can any one send me the configuration details for Asset Revaluation in General and Manual Revaluation in particular with transaction types and T.Codes
Pl treat this as urgent.
Reply may be sent to my mail id [email protected]
Thanks in advance
Regards
R.Sampath

Hello Sampath,
The following are the configurations you need to do:
Asset Revaluation
1. Define revaluation measures. Use transaction code AUFW
2. Define transaction types for revaluation. Use transaction code AO84
3. Limit transaction type to depreciation areas. Use transaction code OAXJ
4. Specify Accounts for revaluation of APC. Use transaction code AO87
5. Specify Accounts for revaluation of Accumulated Depreciation. Use transaction code AO97.
Manual Revaluation
1. Create reason for manual depreciation. Use transaction code OAVC
2. Define transaction types for unplanned depreciation. Use transaction code AO78
3. Limit transaction type to depreciation areas. Use transaction code OAXE
Once the above setup has been completed, the endusers can now :
1. Perform manual acquisition adjustment using transaction code ABSO
2. Recalculate asset values using transaction code AFAR
3. Perform manual depreciation adjustments using transaction code ABAA
4. Post manual depreciation using transaction code ABMA
5. Carry out any other miscellaneous adjustments using transaction code ABSO
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Compare Flag - Automatically Adjustable

Any risks in this setting when generating table maintenance for a custom table?
Thank-You.

This flag indicates whether the maintenance transaction allows the
(checked) activation of Business Configuration Sets (BC Sets), and the
adjustment. This is the case if the maintenance transaction can run in
the background.
For more information, see the Application Help for the table maintenance
generator (transaction SE54).
The following settings exist:
No Information
The system does not know whether the maintenance transaction allows
BC Set activation and adjustment.
As with the setting "Not Adjustable", the content of the BC Sets is
written to the Customizing tables without being checked.
Not Adjustable
The BC Sets cannot be activated and checked. The maintenance
transaction does not support the adjustment.
The content of the BC Sets is written to the Customizing tables
without being checked.
Instead of an adjustment, you can only compare the views or tables
with another client or system. Any modifications that arise from an
adjustment must be made manually.
Adjustable in Dialog
As with the setting "Not Adjustable", the content of the BC Sets is
written to the Customizing tables without being checked.
An automatic adjustment is not possible, however, you can compare
the views or tables with another client or system, and adjust the
differences (either all of them or a selection) with the dialog
adjustment function.
Automatically Adjustable
BC Sets are activated with all field checks.
The object can be adjusted automatically against another client as
part of a Customizing import. This means that the data with
differences can be imported from the comparison client. As well as
the automatic adjustment option, the maintenance transaction also
offers the dialog adjustment function.

Mac mini HDMI 1080p SUCCESS with Panasonic 50" TH-50PZ81B

I recently purchased a Panasonic TH-50PZ81B. This is a UK model with a built-in satellite ("Freesat") receiver, and displays full 1080p and uses a 1920 x 1080 native panel. I used to connect my Mac mini HTPC to a Sony 42" plasma by VGA, and the Panasonic has a VGA input which displays 1,368 x 768 out of the box - no SwitchResX. It's decent. But, I wanted the "full" 1080p so bought the Belkin DVI-HDMI cable. Like a lot of people I got the choice of either the big black bars all around, or enabling "overscan" in Displays which would fill the screen, but, well, overscan! I spent all morning playing with SwitchResX and it just wasn't working (and the instructions at http://www.avsforum.com/avs-vb/showthread.php?t=751713 bothered me in that it seems to suggest you need to increase the resolution so it wouldn't be 1:1 pixel mapping). I tried to look at the service menu but it wasn't obvious what to do so I left it alone, and there is no manual picture adjustment like there was on my old Sony. Urgh.
But, by chance I noticed in the TV's Menu -> Settings menu on page 2 there is an option for Picture Overscan, which was turned on. I turned if off, and just like that got full 1080p 1:1 pixel mapping.
So, that's Mac mini with overscan ON. Use the great (weird) advice from Adam Nash to enable the Display menu bar item as seen here:
http://blog.adamnash.com/2008/01/24/yes-you-can-get-1080p-out-of-a-mac-mini/
It works - you have two identical-looking outputs but your TV will tell you one is 1080i and the other is 1080p.
On the TV settings go Menu -> Settings -> Picture Overscan and make sure it's OFF. Done!
I don't know if other Panasonic screens are similar but I can tell from the frustration on other posts - which I shared, believe me - that there are a lot of people with this issue wondering why SwitchResX is so non-intuitive etc. so I am hoping that for all those people who know how to use Google, this will show up in their searches.

I decided to post in the display forum because it was fine outputing via DVI-HDMI to a 1368*768 TV, and also fine via D-sub to the Full HD TV (although at 1368*768, but that's the limitation of the TV)
But thanks for your advice. I'll post there as well

How to justify text vertically in multi-column frame

How do I justify text vertically in a multi-column frame but within the baseline grid?
Working at a very busy publication, fitting text evenly in multi-column text boxes are crucial to be done quickly! I understand that it can be done manually by adjusting the tracking in order to force the text to end evenly on bottom. However I'm looking to achieve that result automatically, pretty much like the "Justify Vertically" feature except by doing so it spreads the last column lines out, but I need to keep the text on the grid.

You can ask over in scripting: InDesign Scripting

Error While Applying patch ST-PI 2008_1_700 to solution Manager

Dear Techies,
Thanks alot for your fast response.
We are trying to upgrade Solution Manager Stack from
ST-PI 2005_1_700 to ST-PI 2008_1_700 ,
While applying patch it was suddenly stopped with an error
"Manual modification adjustment is neccessary"
While I tried to adjust it.
In Note correction tree. This the message with " green tick"
"0001293326 EWA: Newest ST-PI Is Rated 'Outdated'; Wrong RTCCTOOL Date"
and is not allowing me to proceed further.
How to go about.
Thanks in advance.
regards,
Kiran

Hi Varun,
Thanks for your reply.
As suggested by you, I executed "RTCCTOOL" programme.
It Has given that 4 notes were in red status.
They are.
 1. [Note 69455 ] Addon upgrade ST-A/PI 01N_700SOL
 Description "Servicetools for Applications Plug-In" for Solution Manager 4.0-7.10 (Addon delta upgrade package)
 Implementation From http://service.sap.com/supporttools->ST-A/PI download the addon upgrade package ST-A/PI
 01N_700SOL. Upload to tx SAINT (just as you would do for an installation) and install as per note 69455
 Then restart report RTCCTOOL and choose 'List->Refresh from SAPNet'.
 4. [Note 539977 ] ST-PI Support Packages
Description Addon supportpackage level 4 for ST-PI 2008_1_700 for 7.00 [patches up to level 4 for Basis tools for services]
Implementation Open http://service.sap.com/supporttools-> ST-PI 2008_1_700 ->Supportpk. Add patch SAPKITLRD4 (and predecessors if not yet implemented) to download basket. Release basket via Maintenance optimizer. Upload from frontend int transaction SPAM, define a queue and import the queue.
 6. [Note 539977 ] Note 1312413 for ST-PI
 Description Maintenance Certificates for SPAM/SAINT may get periodically overwritten by invalid ones on ST-PI
 2008_1_7* SP 00. Prevent this proactively,even if you do not yet use the automatic maint. certificate
 distribution.
 Implementation We recommend that you implement the Supportpackage SP1 for ST-PI 2008_1* to solve the error. Only if
 not possible implement note 1312413 with not version >=12 using SNOTE. Regarding automatic maint.
 certificate distribution see http://service.sap.com/maintenancecertificate.
 9. [Note 1293326 ] EWA serviceprep correct. in sequence.
Description Wrong alerts appear in EWAlert Service preparation section (Newest ST-PI Rated Outdated / Wrong
 RTCCTOOL Date) if Solution Manager ST-SER < 701_2008_2 SP1 and satellites on ST-PI 2008_1* / ST-A/PI 01L*.
Implementation Implement the coding correction of this note 1293326 with SNOTE to solve the wrong service preparation alerts. Else if you do not mind the wrong alerts simply set this recommendation manually to green after reading.
These are in green status
Successfully implemented addons/ transports/ notes
 2. [Note 69455 ] Proc. after addon impl.
 3. [Note 539977 ] Addon ST-PI 2008_1_700
 5. [Note 539977 ] Note 1300023 for ST-PI
 7. [Note 539977 ] Note 1293657 for ST-PI
 8. [Note 12103 ] Collectors and TCOLL.
While I tried to implement the note "69455" system is giving the message that there are no valid corrections and is coming out of the process
"Note 0000069455 cannot be implemented since no valid correction is available."
And is same for other notes also.
How to go ahead.
Thanks in advance.
Regards,
Kiran

Manual gas Adjustment

Similar Messages

Maybe you are looking for