Manual Insp Lot for Equipment
Hi
Can we create manual inspection lot for Equipment with mentioning inspection type , please give some details
regards
Hi,
Still there are 10 equipments in which material will be same , Can I create inspection lot with type 89 for material & serial number combination.
Regards
Similar Messages
-
Regarding posting in manual insp lot
Dear all,
Suppose against a purchase order if we are creating manual inspection lot for 10 Ea material let us say out of 10 only 5 are as per specific , how to show in system since there is no stock posting.Hi,
There is nothing supposed dear!!
Any inspection lot that is created manually, for any inspection type will be strictly stock ir-relevant. And will not provide any stock posting. Hence can't increase/decrease the stock.
Regards,
Shyamal -
Dear All,
senario is as below
we are doing 313 movt within the same plant for stock transfer after 313 stock will be in transit after that we
do 315 movt for recieving of the stock.
settings done insp activated for 313 and 315 movt types and 08 insp type is activated in M.M.
but system is not creating insp lots and the stock directly goes into unrest use.
can any body suggest what setting is missing?
your suggestions will be highly appreciated
Thanks
AnilHi Anil
when you post using 315 mvt. type, system will create inspection lot
plz. check @ OMJJ -- for the 315 mvt.type -- QM should be active --> then system will create inspection lot
before that make sure Mat. master for that material 08 insp. active ,and post to inspection stock,task /mat spec, and Automatic assignment and characteristc --> these fields to be active
let me know if u need further detail
Thanks
Sami -
Manual Inspection Lot for Inspection Lot Origin '04'
Dear SAPians,
We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material for the Specified Origin. I feel that there is some customizing issue. Please suggest.
ThanksYes Atul,
The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
The system will ask you for the Order number.
NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
Regards,
Shyamal -
Dear all,
One material which is sometimes used in plant and sometimes sent to subcontractor as a component , if it is procured from
same vendor and when it is coming to plant for usage we should get insp lot and when it is sent to subcontractor we do logical
GR in the plant and material is directly sent to subcontractor at which we donot want insplot .
here material and vendor are same
Please advice
regards
venkatGot your point.
Look, when you are physically receiving it, in MIGO receive the material with mvt type 101, normally as you do.
In case the material goes to the subcontractor and you make your GR, make the following:
Receive the material with MIGO with mvt type 103, this will not create FI document yet, the material will be in the blocked stock, after that release it with mvt type 105, this will create the FI doc you need.
Now the problem is the inspection lot, because in the standard system, mvt type 105 creates inspection lot, therefore deactivate QM on mvt types of 105, and that will stop the creation of inspection lots.
Regards,
Max -
Inspection lot for equipment calibration
We created a equipment with category P, Created task list with insp points 300, maintance package and insp characterstics were assigned thru ia01. Maintenance plan created and pm order has been created. But in qa32, could not find inspection lot. Please advise where need to be checked.
HI
Assign inspection type 14 to the order
Use the control key QM01 in tasklist
Assign inspection points to the task list
Alagesan -
Inspection type 04 should not generate Insp.lot for specific Process orders
Hi Guyes,
I Want to skip the Inspection lots generation for specific process orders of a particular material during Goods Reciept and stock should be directly posting in to Un-restricted stock.
In the material master assigned with Inspection type 04.
Please advise me the possible options to map this scenario.
regads,
RaoIn QDR1
stage 10-click on insp stage
stage 10
no. of insp : 5
new insp stage : 20
rej : 1
new insp stage : 10
stage 20 - tick on skip
stage 20
no. of skip : say "5"
new insp stage : 10
rej : 1
new insp stage : 10
Now use this DMR in Header of inspection plan of material of process order.
what this will do is after 5 inspections it will skip the next 5 inspection lots.
Make sure :
You can maintain setting for "maximum skip duration in plant level.
In QM view click on Skip & auto UD
Create variant in QA16 & run through QA17
Here in QA17 maintain the duration after which you want to take UD
Also make sure that in selected set maintain stock posting proposal for unrestricted. -
Cancel insp.lot for batch material with serial number?
We have a problem with an inspection lot....
A few months ago we made a goods receipt for batch material... it ended up in Q- stock.
The weeks went by and the material was changed ito a serial number material... that process works fine...
But now we want to scrap the material that is batch-handeled ... the inspection dont want to let go.. it want serial numbers... even if I create serial numbers for this the inspection lot
dont let me register any numbers.. So I cant cancel/delete it... And after all I just want to scrap the batch...
Can someone help me?
// Andreasif stock of that material with serial numbers exist, then scrap that stock and disable the serial number for the material by deleting the serial number profile in the work scheduling view of the material master.
then try cancelling the inspection lot. After cancelling the inspection lot, activate the serial number for that material again and bring back the scrapped stock into the unrestricted use.
Note: please advice the users not to post any stock for that material till you complete this or else block the posting t.code for all the users. -
REPORT TO CHECK DIFFERENCE G.R DATE AND U.D DATE FOR A INSP LOT
Hi
I want to track how many dates it has been taken to clear a insp lot for a G.R. So I am looking for a report which shows these days or a report which have G.R date and U.D for inspection lot.
Please guide if there are any reports for this.
Thanks
DhananjayDear Dhananjay
This is available in MCXA, MCXC report as lead time. Lead time is nothing but time taken for clearing the lot after GR
Regards
Gajesh -
Creating a manual inspection lot
Hi,
I have to create a manual inspection lot for a batch of material in inspection stock. However is there any way to move the stock into QI stock even though there is no goods receipt document to reference?Hi,
Refer the help provided by SAP.
QM cannot manage stock movements for insp lots that were created manually.
The QM component cannot manage stock movements for inspection lots that were created manually.
If the Materials Management (MM) and Inventory Management (MM-IM) components are active in your system, you can use the functions in QM to manage the materials while they are in
inspection stock. When an inspection lot is created automatically as a result of a goods movement, the QM component can:
Record and track the material stock in an inspection lot
Make the necessary stock postings to move the materials out of inspection stock
Regards
K.M.Arun -
Customer number not in the inspection lot for a make to order scenario
Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal -
QM Manual Inspection Lot - with Inspection lot origin 89
Hi QM Guru,
I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
No valid inspection type for material 10000037 was found or selected
Message no. QA280
Diagnosis
An active inspection type for the material 1XXXXXXX in plant XXXX could not be found for the specified origin 89 or none of the available inspection types was selected.
System Response
Inspection lots cannot be created.
Procedure
Check the inspection type setting in the material master.
Is there anything which i missing ?
Thank you.Hi,
I hope you have got the answer for this query. You get this error because you are trying to create a manual inspection lot (origin 89) of a material for which Inspection type 89 is not activated.
From your statement,
I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
It is clearly stated that you are using different inspection types. As Rama has suggested, activate Inspection type 89 in the material master and make corresponding master data.
Other than that, you cannot create manual inspection lot for the origins 10, 11, 12, 13 & 14. Similarly, Automatic inspection lots cannot be created for origins 07, 15 & 89. This answers your further query raised in the thread.
ntn -
In-process insp seperately for al products
Hi, my production order qty is for 5 qty. for header material 03 insp type is assigned, in routing micu2019s are assigned. In routing insp point assigned as 100. System generated the insp lot for in-process inspection. Now wants to record the inspection results of all 5 products separately. In results recording screen, entered u201C1st part inspectionu201D as text and recorded the results, similarly for all parts results were recorded. During results recording, individual part valuation is mentioned as accepted or rejected. Say, now out of 5 parts 3 are good, 2 are rejected. In UD, I have not seen any field to show 3 are good and 2 as rejected qty. pls advise how to maintain Different UD qty for the same inspection lot.
Edited by: ys yadav on Mar 18, 2010 12:40 PMHi,
You can here 150 inspection type & can give inspection at regular qty interval.say in your case qty interval will be 1 .
You can do confirmation also their it self but finally posting you can do during GRN only.
Regards
SANIL -
Manual Inspection Lot and Material Document
Dear All,
I created a manual inspection lot using inspection type 89. i wanted to make a relationship between my GRN material document and the Manual inspection lot. Is there a way to link these two. Even in the table level is there a relationship between these two?
Regards,
DTD>
TMDTDSL wrote:
>PO - 470000565
> LI 10 - Material 1000157 Qty - 100 - Sales Order 60156 - Batch X123
> LI 20 - Material 1000157 Qty - 60 - Sales Order 60157 - Batch X123
>
> If i assign inspection type 01 for the above mentioned material two inspection lots will be created with the same batch number. What i want to do is in RR combine these two and record results for one inspection lot. By using inspection type 89 even though i can create one inspection lot combing those two, SO reference (Mat Doc reference) is not there. What you suggested is good but once i create a manual inspection lot the way you explained how do i keep the relationship to the automatic generated inspection lot. If you could explain little bit further really appreciate.
Your understanding is correct here. For above two lot if you batch number X123 then simply assign this batch number X123 to manually created lot with type 89, this way you can map all three lot with batch number.
If you want to enter SO in manually created lot for information or reference then assign this SO at field short text in QA01 (technical name - QALS-KTEXTLOS)
FYI - For 89 lot you can do RR & UD for record but this lot would be not stock relevant.
Hope this helps.
Thanks!!! -
I want to manage manual inspeciton lot for material & serial no.
I defined the material as serial no. but no serial field excit.
Thanks
ShlomitHi ,
As serial numbers are used for inventory maintenance therefore when you create manual inspection lot there is no field for serial number maintenance.
But the results you can manitain with serial numbers.
Cheers,
Tushar
Maybe you are looking for
-
Camera Roll is not the same in Camera app vs Photos app ???
iPhone 4S issue... I just got a new iPhone 4S. Restored from a 3GS backup. I noticed yesterday that some of the photos that I took with the built-in Camera app aren't showing in the Camera Roll. Specifically, the last 3 pictures that I took plus a co
-
my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?
-
How do i sync my ipod to this library without erasing whats in my ipod?
I just got a new macbook, switching from a pc (windows xp). My ipod is formatted from Windows and i plugged it in. Now its only giving me the option to erase whats currently on my ipod and sync it with the current library on my mac( purchased songs f
-
Java.io.NotSerializableException error when starting 8.1 app server
I am running JES 054Q with uwc deployed on the app server 8.1 (along with am, portal, and da). I am getting a java.io.NotSerializableException for com.sun.uwc.common.util.UWCPreferences when the application server starts. Any access to get attributes
-
What is the piece of the WSA product that allows my mobile clients to be monitored and protected from the web threats when not on the local network? Is it just WSA cloud security? How does this work? Do I push my local network WSA policy to a web bas