Manual Inspection Lot for Inspection Lot Origin '04'

Dear SAPians,
We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material  for the Specified Origin. I feel that there is some customizing issue. Please suggest.
Thanks

Yes Atul,
The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
The system will ask you for the Order number.
NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
Regards,
Shyamal

Similar Messages

  • Inspection Lot for inspection type 09_ Vendor field is blank

    Hi,
    Inspection lot for inspection type 09. I am not getting the vendor name in inspection lot details. Vendor field is blank.
    I need this field updated. Please guide me what to do for this.
    Thnaks & Regards
    Kundan kumar

    HI Ashok,
    I checked in material batch data( msc3n) vendor details is there.
    Please update me more in this regard
    Thanks & Regards
    Kundan kumar

  • Inspection lot for inspection type 10,11,12

    Hi,
    My requrement is system should generate inspection lot at the time creation of sales order & before PGI.I assigned
    inspection type 10,11,12 in QM view in material master.I have a quality planning with usage -3 & status -4.But when I am creating sales order & doing PGI system is not generating inspection lot.
    manoj

    Hi
    check following   QCC0>Qulity inspection>Inspection lot creation>Inspection at shipping>
    Assign Inspection Lot Origin to Delivery Type
    Assign agaist del type:
    10 ; Outbound Delivery
    11 :Delivery w/o Ref.
    similerly for 12
    Also
    Assign Inspection Type to Delivery Category -->assign inspection lot origin & Inspection type for del catagory
    Regards
    Sujit

  • Inspection lot for inspection type 08

    Hi Eperts,
    Please tell me following:
    Inspection lot does not create when transfer material from plant to plant.
    Created STO PO in plant 1000. Issueing plant is 2000.
    MMR maintained in both plant with inspection type 01,08 activated in both plant.
    As per me system should create inspection lot after GRN takes place against STO PO in plant 1000.
    What could be problem.
    Regards,
    Raja

    Hi Raja,
    In your previous posts you referred to performing a 101 movement to try get an inspection lot of type 08, this is incorrect.
    For movement type 101 you need to activate inspection type 01 and place a block on the q-info record against the vendor in order to get an inspection lot of type 01.
    In your scenario, you are wanting an inspection lot of type 08. This is an internal stock movement and wont work with a 101 movement as this is for incoming stock. You should activate inspection type 08 on the material master and use a movement type such as the 322 to move stock to quality inspection. This will create an automatic inspection lot of type 08 as long as you have set QM not active = '  ' for mvt type 322 under SPRO -> Quality Management -> Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements -> deactivate quality inspection for a movement type.
    Regards,
    Roderick

  • Enhancement-One inspection lot for early lot and serial profile

    Hi,
    I have a requirement shown below.
    Can anyone guide me to proceed this Enhancement from the start?
    Inspection lot for production order is created at production order release, when the finished good has a serialnumber profile assigned in the materials master and the serialnumbers are captured in the handling unit assigned to the production order, the system will create another inspection lot.
    <i>Required system enhancement:</i>
    Only 1 inspection lot per production order should be generated.
    <b>NB.</b> Without this enhancement both inspection lots created for the production order have to be closed to be able to close the production order.

    Please try with sub-routine: userexit_move_field_to_lips or userexit_save_document of include: MV50AFZ1.
    I guess clearing LIPS-QPLOS for specific conditions would do the trick for you..
    <b>Reward points</b>
    Regards

  • Multiple result recording for Manual inspection Lot using inspection point

    I want to record inspection result for inspection type 89 against *inspection point*. Then I create new inspection point and assign it in quality plan. Then I have done the multiple result recoding against one manual inspection lot in DEV server. But when it is going to QAS server then error is coming during result recoding. Error is "The results transaction cannot be used for
    inspection" Message no. QE094.
    Plz give me the solution to record the result.

    Reason is very simple : the  the inspection point definition in the task list header is incompatible with the sampling procedure assigned to the characteristic.Make sure that you select the appropriete radio button in QDV1 while creating sampling procedure and assign the same against each of the MIC's in the task list.
    Make sure that the sample tab in QA02 is pressed while assigning the inspection specification & status of the lot is REL

  • Inspection results for more than one lot

    How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
    Prahlad

    Dear Prahlad
    You can see it in ways
    1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
    3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
    4) standard reports such MCXD,QGP1 can be used
    Hope this helps
    Regards
    gajesh

  • Bapi or FM to read data for inspection lot

    Hi Experts
    I need bapi or FM that will read all specifications and result value for entered inspection lot
    the data that we also got in transaction qa13
    I need exactly that data
    Thanks
    Taran

    hI,
    Check the below bapi's
    GetDetail : Load detail data for inspection lot [ BAPI_INSPLOT_GETDETAIL ]
    GetList : Select inspection lots [ BAPI_INSPLOT_GETLIST ]
    GetOperations : Select inspection operations for inspection lots [ BAPI_INSPLOT_GETOPERATIONS ]
    SetUsageDecision : Make automatic usage decision [ BAPI_INSPLOT_SETUSAGEDECISION ]
    StatInterface : QM-STI Interface [ BAPI_INSPLOT_STATINTERFACE ]
    Reward if helpful.
    Regards,
    nagaraj

  • QM : First inspection lot - inspection plan, other inspection lot another insp. plan

    Hello.
    Is it possible with standard SAP  when it is create the first inspectio lot for material/vendor  ( origin 01) that it takes an inspection plan, and for the next inspection lot that will be created for the same material/vendor ( origin 01) that system takes from another inspection plan ????
    Or have i to user a badi/user-exit?? which?
    Regards.
    Antonio

    Dear Antonio,
    Try this
    1. In material master do not set the auto release indicator for 01 inspection type
    2. Make inspection plant for material with group counter 2
    3. Now you have two different inspection plans with group counter1 &2
    4. Do the GR for same material for two times
    5. Two inspection lots will be generated
    6. Assign inspection plan manually for first inspection lot with first group counter
    7. Assign inspection plan manually for first inspection lot with second group counter
    Please let me know is it working or not
    Regards,
    Jagan

  • Configure another Inspection Type for Production Order

    Hi QM Gurus,
       I have one scenario, my client wants to have another inspection type for inspection lot origin goods receipt from production because they have this requirement that for some materials they need to have a status profile that will be active for inspection type standard 04. And there are also some materials from goods receipt from production that does not need status profile. Since the only thing that we could assign as specific status profile is to its inspection type. Hence, i need to create another inspection type for lot origin goods receipt from production aside from inspection type 04 that will create automatic inspection lots with different status profiles.I try this in configuration but no inspection lots has been made for new inspection type assigned to LOt origin 04 and also assigned in the material master inspection set-up. How will i do this???
    Thanks.
    Regards,
    Matildo, Edsel
    QM Consultant

    Hello Edsel,
    you can configure for example an inspection type 0401 and activate this inspection type for the inspection origin 04 in customizing. Please look at the following customizing items:
    Transaction QCC3
    -> Inspection Lot Creation
    - Maintain Inspection Types
    - Maintain Inspection Lot Origins and Assign Inspection Types
    By activating the correspondent inspection type in the material master you can decide which inspection type is used. If you need both then you could think about using the exit QAAT0001 to assign the correspondent inspection type.
    Regards
    Isabelle

  • Quality Mgt - can I create a new inspection type for source inspection

    I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
    What is the application of vendor inspection lot origin ? Can be used for source inspection ?

    HI,
    For source inspection.
    If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
    But before that , check whether you can use  the existing insp type 01 / 0130.
    You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
    Also go through the help tips provide by SAP
    Inspection Type for Insp. Lot Origin (Source Inspection)
        Inspection type for the source inspection
    Use
        If you enter an inspection type for inspection lot origin 01 in this  field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
    Dependencies
        The inspection type must be active in the inspection setup (Quality Management view) of the material master.
        If a status profile is stored in the quality info record for the supply  relationship, a goods receipt inspection takes place instead of a source  inspection.
    Regards
    K.M.Arun

  • Inspection Specifications from configuration for inspection type 10

    Hi All,
    We need the inspection specifications for inspection type 10 (Insp. for delivery to cust. (w/ order)) from the characterstic values of the Sales Order Configuration. We have done this successfully for inspection types 03 and 04.
    In configuration the checkbox of "Insp. according to configuration" is not available.
    Kindly suggest how to do this. We urgently need the solution.
    Regards
    Ramakanth

    Inspection accrd. to configuration is not possible with inspection type 10/11. If you are batch managed and you maintain the same char. specifications in batch determination, you can explore the option inspection by batch option available for insp.type 10, which will get the spec. from the batch.search strategy maintained for the customer.
    As of now I dont know how you can do if the above option does not work .
    Thanks,
    Ram

  • Incoming inspection through source inspection

    Hello,
    I want to do incoming inspection for few raw materials on lot basis (each trucks is one lot). But quality department  do the inspection for certain characteristics and truck will allowed inside only if QA dept accepts the lot.
    Then gross weight is taken and material is unloaded in yard. Again empty truck wt is taken through weigh bridge. Then Good receipt for that lot is done based on formula GRN qty= GROSS - Tare wt.
    So I think option for me for incoming inspection is Source inspection. But quality needs data and Usage decision done to be based on lot wise. Is it possible for me to do source inspection based on lot wise for one open purchase order.
    Concluding:- I need incoming inspn before Goods Receipt for each lots I receive. I may have one PO, but my vendor may give 5 trucks on that PO. Each truck I need to maintain as a lot for inspection.
    Whats the best way...Assured rewards for best solution

    Have you tried using inspection points for this?  Each truck can be a new inspection point.  But you can't make the UD until the end of the day or the next day which could be a problem.  I think you'll have to have the material go right to unrestricted inventory, (turn off post to inspection stock in the inspection type setup for the 01.)
    As you do each receipt, the qty of the truck will increment the inspection lot posting qty as well as unrestricted inventory.  If an inspection point fails, the tech/mgr. would post that qty in the returns stock line.  This would move the qty from unrestricted back to the vendor.
    The final UD would be on the qty of all five trucks received for the day minus any that were rejected.  You may need to work with the invoicing folks as to how this all impacts the invoice.  But I beleive they'll see a shortage of material if any trucks were rejected.
    Craig

  • QM Manual Inspection Lot - with Inspection lot origin 89

    Hi QM Guru,
    I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
    I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
    No valid inspection type for material 10000037 was found or selected
    Message no. QA280
    Diagnosis
    An active inspection type for the material 1XXXXXXX in plant XXXX could not be found for the specified origin 89 or none of the available inspection types was selected.
    System Response
    Inspection lots cannot be created.
    Procedure
    Check the inspection type setting in the material master.
    Is there anything which i missing ?
    Thank you.

    Hi,
    I hope you have got the answer for this query. You get this error because you are trying to create a manual inspection lot (origin 89) of a material for which Inspection type 89 is not activated.
    From your statement,
    I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
    I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
    It is clearly stated that you are using different inspection types. As Rama has suggested, activate Inspection type 89 in the material master and make corresponding master data.
    Other than that, you cannot create manual inspection lot for the origins 10, 11, 12, 13 & 14. Similarly, Automatic inspection lots cannot be created for origins 07, 15 & 89. This answers your further query raised in the thread.
    ntn

  • Automatic Inspection lot not generated for Inspection lot origin 12

    Hi all,
    I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
    The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
    Please let me know i am missing something?
    Regards

    Hi,
    You are missing 1 Config
    Quality Management
    Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
    mantain inspection origen agenist Delivery type u are using.
    also you need to create Sales Info record(QV51)
    I hope all other settings are OK then it should work
    Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

Maybe you are looking for

  • Converting to text/xml

    Hi, I get this error in sxmb_moni: "Delivery Exception: invalid content type for SOAP:TEXT/HTML." I have set the ContentType with the messageTransformBean in the SOAP receiver adapter. but I also need to set parameter "Do not use SOAP envelope", add

  • Creating Student Web Site Folders on Leopard Server

    We recently got an Xserve to use as a Web server for hosting my class site and my student Web sites (~220 per year). I have it setup as a Web server no problem and it is already hosting the class page. I have no clue how to run it like an ISP host or

  • Cancel PO Pintout

    Dear Peers, While taking the printout of purchase order where all the line items are deleted, the system showing the message "No print-relevant changes to document XXXXXXX exist" I checked the print relevant changes in table T166C, where EKPO with LO

  • How to add Cleat button for Prompts

    Hi I have 7 Prompts in my dashboard page. And i have Apply filter. But it is not working. Do i need to some thing for this? Help me on this. And i want to create a Clear Button for the all Prompts. Than

  • Schedule XI3.0 Webi report to Inbox

    Hi there, my customer schedules a simple Webi report to Inbox and it fails with the error;                                                                                "login error. [Internal error: Unable to initialize the session manager.]: [Crys