Manual install of DPM 2012 SP1 protection Agent and how to automatically approve Microsoft Software License term ?
Hi All,
When installing manually protection agent DPM 2012 SP1 on new target computer, I get "Microsoft Software License terms" to accept...
Is there a way to automatically approve the license ? I try various commands like :
/quiet
/quiet /eula:yes
/quiet /AcceptEula:yes
Mike, if you're around any
suggestion is welcome :)
Stephane.
Please remember to click “Mark as Answer” on the post that helps you. This posting is provided "AS IS" with no warranties. knowledge is valid only if it is shared by All.
My DPM blog Yet Another DPM Blog
Thks Geaux-Tigers,
it works like a charm :)
I also found the DPM technet link: http://technet.microsoft.com/en-us/library/jj650955.aspx
DpmAgentInstaller.exe [/q] [<DPM server name>] [/IAcceptEula]
Stephane
Please remember to click “Mark as Answer” on the post that helps you. This posting is provided "AS IS" with no warranties. knowledge is valid only if it is shared by All.
My DPM blog Yet Another DPM Blog
Similar Messages
-
DPM 2012 SP1 - Protecting Exchange 2010 and Exchange 2013 at the same time
Hi,
From which Exchange Server am I commited to copy the ESEUTIL.exe and ESE.dll to the DPM Directory for protecting the whole Exchange databases from both products (2010 and 2013) ?
Thanks for replies.
Regards
PhilThe visual c++ libraries actually need to be installed on the Exchange 2013 server.
To protect Exchange 2013 with DPM SP1, in addition to copying the ese.dll
and eseutil.exe files to the DPM
bin folder, you also need to install the
Visual C++ redistributable for Visual Studio 2012 Update 1(vcredist) on your Exchange server. You can download it from
http://www.microsoft.com/en-us/download/ details.aspx?id=30679
Installing vcredist on your Exchange server loads components of Visual C++ libraries. The Visual C++ libraries are needed when an application that was developed using Visual Studio 2012
is installed on a computer that does not have Visual Studio 2012 installed. Without Visual Studio 2012 or the Visual C++ libraries, you will run into errors trying to protect Exchange 2013.
Let us know if it works after doing this.
NOTE: The Exchange 2013 ese.dll and eseutil.exe files will cover Exchange 2010 also.
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing! -
Recently I have updated a DPM 2012 SP1 standalone server to DPM 2012 R2. That it’s self was a challenge... Following the upgrade most of the protection groups required consistency checks. For some time I have been having problems performing these consistency
checks on remote servers over a 10Meg link.
On the DPM server I would kick off a ping to the remote host, then start a consistency check. Within a few seconds I would start to get dropped pings, and very large ping response times, 3000ms plus. Within 3 minutes the pings would time out completely and
no connections can be made to the remote server, RDP etc. However any other server on the network can connect to the remote client. Eventually the DPM jobs times out and sometime later the pings also return.
The resolution to this has taken some digging but this is what I have found. The DPM agent update does not seem to fully work and requires a reinstall. Here is my process:
Logon to remote client server
Install .net 4 (a raw install of the client requires this, may not be needed when done via DPM)
Via Add Remove Programs, remove DPM agent
Clean up Reg
Delete "HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager"
Delete "HKLM\System\CurrentControlSet\Services\DPM**" (However this key is not there for me)
Back onto DPM Server
Modified protection groups as required to remove all instances of the client server
Remove Agent for client server
Install agent via DPM (watch for the glitch right at the end where it does a failed, then succeed…)
REBOOT client server
Add back into protection group
Consistency check kicked off automatically
This seems to have fixed the issue.Hi,
The prerequisite required for DPM 2012 SP1 that must be installed is a re-rerelease of UR3 which is 4.1.3317.0 - please download and install the update specified.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Installing DPM 2012 SP1 onto Server 2012 R2 (Compatible / Supported)?
Hi,
Can DPM 2012 SP1 be installed onto Server 2012 R2? i.e. is it compatible and also is it supported by Microsoft?
If so are there any official documents or links provided by Microsoft for this installation scenario?
I would have installed DPM 2012 R2 onto Server 2012 R2 but this is not possible due to DPM 2012 R2 not supporting Server 2008 protected servers!
Thanks,
Microsoft PartnerHi,
DPM 2012 SP1 is not supported running on Windows server 2012 R2.
System requirements for System Center 2012 SP1 - DPM
http://technet.microsoft.com/en-us/library/jj651645.aspx
Can you tell me how many Windows 2008 servers you need to protect and what is preventing you from upgrading them to Windows 2008 R2 ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
MMC crashes when attempting modification of a protection group in DPM 2012 SP1 RU3
Hi All,
I've got a problem with my DPM 2012 SP1 server for a few weeks now. It's backing up and restoring fine, but when I attempt to modify any protection group, the MMC crashes. This happens even before the modify protection group dialog is displayed, just a few
seconds after clicking 'modify' with the protection group selected.
it was running DPM 2012 SP1 RU1, is now running RU3, this update did not make the difference I was hoping for. Also installation of the DPM console on a remote management server results in the exact same problem.
Below is the error message. Has anyone else had this or a similar problem and solved it?
Thanks,
Jacob
Description:
AppName: mmc AppVer: 4.1.3313.0 ModName: mmc.exe
ModVer: 6.2.9200.16384 StackHash: 7C18B55A
Problem signature:
Problem Event Name: DPMException
Application Name: mmc
Application Version: 4.1.3313.0
Module Name: mmc.exe
Module Version: 6.2.9200.16384
Exception Name: System.NullReferenceException
Exception Point: Microsoft.Internal.EnterpriseStorage.Dls.UI.Dpw.SelectionPage.ConstructAllServersView
Other: 7C18B55A
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1043
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=190175
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi
I had the same problem with Sharepoint backups, there was a problem with the protection group so i removed it and added it back. since then no issues. -
DPM 2012 SP1 long term backup fails when protected server reboots
Hi,
we're using DPM 2012 SP1 with Short-term and long-term protection.
We use a daily short-term backup to disk and a weekly long-term to tape.
We are noticing that when a long-term tape backup is running, it fails when we reboot one of the protected servers.
Is anyone else having this issue ? I assumed the long-term tape backup will be created from a disk-recovery point.Hi,
What is the detailed error code in the properties of the failed initial replica or consistency check job ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Hi,
We have upgraded DPM 2012 SP1 to DPM 2012 R2 and OS is Windows 2012 standard.
Now in File Protection Group, we receive error
"An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))".
This happens to only one Drive(X: Drive) of the PG server, other drive(Z: Drive) backup is working fine.
We tried,
Deleted entire protection group and recreated ,
Ran consistency job 2 to 3 times.
Ran Synchronize with consistency check.
But every time It failed. Before upgrade it was working fine.
ThanksHi
I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057)
issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here
http://support.microsoft.com/kb/2904687/en-us
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your
question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights." -
The Background:
1. DPM 2012 SP1 was originally installed on a server with local SQL 2008 R2 instance (SQL was installed as part of DPM)
2. SQL database was upgraded to SQL 2012 SP1
Now I want to upgrade DPM 2012 SP1 CU3 to R2. It is throwing the following error. Any help would be appreciated.This absolutely fixed my issue. I had upgraded my version of SQL and was then trying to upgrade DPM 2012 to 2012R2 and I could not figure out where the installation was querying old version of the reporting services.
DPM Log Before:
[6/4/2014 2:53:32 PM] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[6/4/2014 2:53:32 PM] Information : Querying WMI Namespace: \\DPMServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v10\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[6/4/2014 2:53:32 PM] * Exception : => System.Management.ManagementException: Provider load failure
DPM Log After:
[6/4/2014 3:25:36 PM] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is not present on this system.
[6/4/2014 3:25:36 PM] Information : Query WMI provider for SQL Server 2008.
[6/4/2014 3:25:36 PM] Information : Querying WMI Namespace: \\DPMServer\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSDPM2012' and PropertyName='Version'
[6/4/2014 3:25:36 PM] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is present on this system.
[6/4/2014 3:25:36 PM] Information : Inspect context initialized with
SQL Server namespace: \\{0}\root\Microsoft\SqlServer\ComputerManagement11
Reporting namespace: \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
SqlServerDetected: True
[6/4/2014 3:25:36 PM] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
[6/4/2014 3:25:36 PM] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
[6/4/2014 3:25:36 PM] Information : **********************************************************************************
Thanks for This FIX! -
DPM 2012 SP1 - Single Data Source Written to Multiple Tape Drives
Just a question, really...
I know that DPM can write to multiple drives for a single protection group with more than one data source.
However, is it possible for DPM 2012 SP1 (or R2) to write to multiple drives from a single data source from a single protection group?
So if I have "DataSource A" in "MyProtectionGroup" and I allocate 2 tape drives to the PG, could DPM use both drives to backup the PG?
I assume the answer is "no," but I just wanted to double check. Thanks.Hi,
What you are wanting is a feature called striping and DPM does not have that advanced feature.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Backup DPM 2012 SP1 from Recovery console
Hi
I have a problem. I have a server with Windows Server 2008 R2 and DPM 2012 SP1. Because of a recent RAID controler crash i am unable to fix this server to boot to windows. I can only get into recovery console. I see the volumes normaly! So here is a million
dolar question. How can i backup DPM databases from recovery console so that i can make a full restore when i freshly install new windows and DPM?
Thanks for all your help in advance.
BoštjanHi,
only Thing you need ist MDF and LDF files from DPMDB.
Try to copy These two files.
Install your new Serve with same Name and same DPM version
Restore DB with SQL Management Studio and overwrite the new and existing one
present DPM Backupstorage to the new server
Run dpmsync -sync
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat -
DPM 2012 SP1 4.1.3426.0 - CRASHES WHEN TRYING TO OPEN JOBS FILTERS
I have 2 DPM 2012 SP1 servers and both are behaving the same. They were working fine earlier this week and suddenly MMC crashes when I try to open any Job filter. Everything else appears to be working fine except when I try to view any of the
default Job filters or custom filters I created such as All Jobs or All Jobs in Progress.
Description:
AppName: mmc AppVer: 4.1.3313.0 ModName: mmc.exe
ModVer: 6.1.7600.16385 StackHash: E4489908
Problem signature:
Problem Event Name: DPMException
Application Name: mmc
Application Version: 4.1.3313.0
Module Name: mmc.exe
Module Version: 6.1.7600.16385
Exception Name: System.ArgumentException
Exception Point: System.TimeZoneInfo.ConvertTime
Other: E4489908
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033http://social.technet.microsoft.com/Forums/en-US/cc576f9d-602b-4331-a745-e7bab12a24cf/dpm-console-crashes?forum=dataprotectionmanager
https://blogs.technet.com/b/dpm/archive/2012/01/30/fix-the-dpm-console-crashes-and-logs-event-id-945-when-making-any-changes.aspx
http://support.microsoft.com/kb/2905631/en-us
http://scdpm.blogspot.ru/2011/12/dpm-console-crashes-on-recovery-tap.html
Have a nice day !!! -
I get one or the other error when i install SQL server 2012 SP1 in my Lab server
I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htmSorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected] -
<p>Hi,</p><p>I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.</p><p>The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.</p><p>The detail.txt log file shows as follows:</p><p>(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID<br />(01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True<br />(01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True<br />(01) 2014-07-17 15:36:35 Slp: ----------------------------------------------------------------------<br
/>(01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction<br />(01) 2014-07-17 15:36:36 Slp: Running discovery on local machine<br />(01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete<br />(01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01</p><p>After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails</p><p></p>Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
DPM 2012 sp1 Exchange 2013 sp1
Hello
Is DPM 2012 sp1 supported to backup Exchange 2013 sp1?
Bulls on ParadeHello,
At present, there are no official articles or Exchange Team Blogs to verify whether DPM 2012 sp1 supported to backup Exchange 2013 sp1.
Before you use DPM 2012 sp1 to back up exchange 2013 sp1, please test it in lab environment. If there is any error, please free let me know.
Cara Chen
TechNet Community Support -
I want to uninstall ios 6 from Iphone 4s and install ios 5.1.1 ... and how it to do,please help me!
There is No Apple Supported downgrade path...
See this Discussion...
https://discussions.apple.com/message/19702812#19702812
From the More Like This section on the right.
Maybe you are looking for
-
What is the best way to upgrade from 10.5 to 10.7
I am trying to figure out the best way to upgrade my MacBook Pro from 10.5.8 to the new Lion 10.7. From what I have heard so far, I need to get a copy of snow leopard first so I have the APP Store then download Lion. Has anyone heard of a bundled pac
-
How to keep a CD or DVD open for more than 1 burning
Hi, In Windows, CD/DVD burner software allowed one the option to keep the disk "open", so that one could burn more than once. I don't find this option in the Mac. Is it impossible? Thanks, Juan Dent
-
Word mac won't always save - i'm losing work
I've been using Word for Mac over several years, but recently it's been failing intermittently to save changes to documents, with the result that I've been losing several hours' work. Though I key 'Command/S' frequently - even obsessively! - on these
-
Hello, I am trying to debug some of my code for a set of WPF buttons. I am stuck with an issue that I cannot get around. When I launch the debugger from Visual Studio 2013, I get the following in the web browser: An error occurred in the applica
-
how to check if Adobe send now system is down or not