Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

Similar Messages

Hierarchy Data not saved after Hierarchy Load

Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
Abhishek

Abhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks

Movement types data not capturing from BW cube data load

Dear Experts,
We are supporting BPC 10.0 Netweaver consolidation activities.
As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
ZFIGl_CA10 : From this cube the YTD closing balances of the balance sheet items are captured.
Opening balances are copied from the last period of the previous year through balance carry forward.
For a balance sheet itens, we are getting the F99 closing balances correctly captures.
But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
No modifications are done for both the file.
Please find the below attached screen shot and kindly help me on the same.
Regards,
Shilpa

Hi Shilpa,
I had the same problem in mi last consolidation implementation and the solution in this case was
implement all the data flow for the 0FI_GL_014,
Regards,
Mario

Data not saved in database

hi,
i'v a prob. that once i create quation through va21 then it create and saved data.
now when i create sales order through va01 then it show data saved and gave the sales order no.
but when i 'm going to change it then message comes order not in data base.
when i saw the data in table like vbak/ vbap then i found no data.
what is the prob.
pl. help me.
mukesh

Hi Mukesh,
May be the data is not saved at all. Use TCODE SM12 and SM13 to check if there are entries for the corresponding table under processing
Regards

Response data not saved in PDF

Dear All,
I created an interactive form with a web service. I filled in the form and sent all the datas in SAP through the web service.
All worked properly except that I have a return message from SAP. This message is binded in my form as response field.
I saw my message in the form when the WS is finished but I saved the PDF on my PC.
When I look at my PDF later, the return message is disappeared, it is not saved in my PDF as all the other fields.
Thanks to help me
Kind regards
Véronique.

Dear all,
Can someone help me ?
All the other data are saved in the document. But I think that it is because the return message is not keyed but is only a answer in the web service, the PDF can't save it ?
If I change the field (add some character after the return value from SAP) and I save, the value is kept.
Could someone tell me how to do ?
My button is an Execute one with the data connection on my web service.
If I re-merge data, all the fields become empty except the response return message. Even in this case, the message is not saved in the PDF.
It is important !
Thanks
Kind regards
Véronique

Data not saving in Custom Infotype

Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra Agrawal

Hi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure. What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure

Data not saving in flowable form

Hi,
I have created a form where there are flowable and positioned parts. In the attachment section, data entered into Attachment A (flowable) seems to save, but after saving, closing and re-opening, the data has not saved. The data entered into Attachment B and the rest of the form does save.
Can I send the file to someone to have a look?
Thanks.

Please send your form to [email protected]
I will try to look into the issue..
Nith

File- XI- IDoc: Idoc header data not saved correctly

Hi guys!
I have a very strange problem:
I have a file to xi to IDoc scenario. Everything seems to be fine, IDoc is created in target system, but with strange error: <MESCOD>XX</MESCOD> segment is not written in IDoc header segment. This segment is available in message sent to ECC (after mapping), so there is no problem with ommiting the segment in mapping. But it's not saved.
This scenario worx fine in QA, but not in PRO.
Any ideas, what to look at?
Thanx a lot! Olian

Hi,
check the IDoc which was in PROD. and see the ibound status and actual reason .
depending upon the actual status you can resolve the issue.
Chilla

Manual update option not saved

I have all my music on an external drive that is not always connected to my laptop. So I would like to manage my iPod manually. The problem is that everytime I open iTunes the manual option is not checked and my playlists get erased faster than you can say "stop doing that".
How do I enforce the manual option for all time?
80GB iPod Windows XP

You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7 installed hold down the Control and Alt keys (or Shift + Ctrl keys in older versions). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. You should be able to set your iPod to manual once you are connected:
iTunes 7 Keyboard Shortcuts for Windows
Managing content manually on iPod

Essbase - Data not saving in excel add in

Hi everyone,
This is my first time building a cube from scratch and would appreciate if you guys can point me to the right direction. I am currently running into issues with saving data using Excel add in. I have a BSO cube with 6 small dimensions (Currently with less than 15 members in each) + 2 additional attribute dimensions. I created the cube manually in EAS and did a sample data load through a flat file without any issues.
I have been able to use the Excel add in to retrieve the sample data and navigate the tree without any issues as well. However when I tried to retrieve/lock and send , manual changes on the grid, the data doesn't seem to save. When I hit retrieve my changes are gone.
I haven't made too many changes to the default settings but have checked that the application allows for updates and that I have the Application Manager Application access as well. Are there any settings I should look into that might be causing this?
Thanks in advance for your help.
Tony

two possible issues
1. The member you are trying to send data to is a dynamically calculated member
2. you are trying to send data to a member that is the only child of a parent and the parent is not tagged as never share. If there is a one to one relationship between a child and parent, there is an implied share that is created. The NEver Share on the parent will fix that.

Planning area data not matching with backup cube / PSA

Hi friends,
while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
Pls its urgent.
Pts for sure.
Vishal.
9326179903

make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
if you got to /SAPAPO/SDP_EXTR then you can see this button
you can set this up as a program scheduled to run before the updation of your cube
As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
Are you extracting at a detailed level or at the aggregated level
Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

Data not loading /updating into cube 0lc_c03

Dear Friends,
I extracted data for three data sources i.e. 2lis_03_bx,
2lis_03_bf,2lis_03_um i got data in BW PSA with out any
error but that data is not updating in cube 0lc_c03
i have done settings at r/3 at t.code mcnb,SBIW and I had make NDI flag active at t.code FIBF. do i need to right.
at SBIW I have done like this settings: Inventory controlling
1,Determine Industry sector I have selected Standard (core).
2,Transaction key maintenance for SAP BW I have selected application MM and operat all i.e. 0,1,2,3,4,5,6........all of MM and saved
3,Then stock initialization.
and deleted setup table data for inventory controlling
and after assigning keys I again loaded setuptable.
I am geting data in r/3 rsa3 and in BW PSA with out errors for all three data sources but not geting in cube
but at data source 2lis_03_um update rules there are few key figures with out green light i.e. 'x' but update rules are active please guide me do ineed to write
any update rule level routines please guide me.
please guide me how to get data into cube.
Thanks in Advances
rafeeq ahmed
<b></b>

Hi rafeeq,
Are you using business content update rules or custom.
check each rule seperately. do a simulation on the data load, if you feel the update rules are correct.
Check if your validity table is maintained.
hope it helps.
kris

BUG: Face recognition data not saved to images.

i have the option to automatically save XMP data into the images activated.
so all keywords and metadata changes are not only saved to the catalog but also into my DNG and TIFF images.
now this works fine for everything except the new face recognition data.
i mean the areas (rectangles) where the faces are.
i guess the problem is that the images already contain the keywords (names) of the persons in the images.
what i did was using the rectangles to identify the persons in the images. drawing rectangles around their faces and name them.
this info about the rectangle positions is NOT automatically stored in the image files. not after hours of letting LR run idle.
this info is only stored when i manually save (CTRL+S) the images or do something other to the metadata (like adding NEW keywords to it).
so in short: just adding the face region data (the rectangles) will not trigger the automatic XMP save function when the name keyword was already asigned as keyword to the image.
that´s very bad and must considered a bug in my opinion..
i don´t like to rely on the LR catalog only. it´s unsave even with backups.
i want that the metadata info is stored in the images.
also when i give away my images i want that the metadata is in the images.
that´s why "automatically save XMP" is always active and very important for me.

I don't have any info but repost your original info at this site. Supposedly Adobe reads this and it should not get lost in the clutter I have posted a few bugs there and they were acknowledged but not fixed but Adobe seems to be pretty good at fixing potential data loss bugs/problems which I consider this to be if it is working as you describe.
Photoshop Family Customer Community

Layout is not saved

Hi SAP developers,
I got the following problem: In an Interactive Forms I inserted some ui-elements which are invisible when the form is opened the first time. After the user makes some interaction then those ui-elements get visible. The problem now is that when the form is saved and reopened after saving, then the visibility of all ui-elements is set back to the initial value (invisible). Is there a possibility to save also the layout or to prevent the framework from loading the initial visibility values?
Greets Ruben

Thanks Petr for your reply,
my experience is exactly the same what you expected. I read the lcdesigner_scripting_reference.pdf but the only thing which goes in this direction is the scripting property restoreState. But I do not know how to use it correctly. I thought of the manual mode.
As a workaround I used the initialisation methods to reset the layout as you suggest. But I do not feel comfortable with this solution.
Another way for solving this problem is perhaps to put those visibility properties into the interface. But this is not nice too.
Greets Ruben

Data not validating in the cube

We have upgrade the quality box to BI 7.0 recently as part of the testing we found that data is not consistent.The quality box is a copy of the production box and thereafter the quality box was upgraded to BI 7.0. The no of requsts in that specific cube which I say data is not consistent has the same number and same requests between QA & prod,but I found that in one of the data requests the data is different between QA & prod.
This data request should be the same bcoz it is just copied from the prod it has the same requestno/no of added records,but the data looks to be diffrent inside the request.
Pl let me know if anyone encountered the same problem during the upgrade and how to resolve this.
Thank you

Hi Kumar,
1. are you sure no selective deletions were done on the cube?
2. is the data still different if you check the data via a query?
I'm mentioning this because we sometimes see very strange results when using LISTCUBE (wrong figures!).
When using a query, the correct data are displayed.

Manual Layout data not saving to trx cube

Similar Messages

Maybe you are looking for