Manual load balancing or tnsnames load balancing

Hussein,
We have 2 nodes apps (apps1 and apps2 both on separate machine) connecting to a 2-node Rac database (db1 and db2 both on separate machine).
We want to implement loadbalancing on the 2 apps servers . I "heard" in can be done using the tnsnames.ora load balancer? Or I am just out of this world. :)
Thanks a lot,
Ms K

Hi;
Please check below and see its helpful:
11i RAC JDBC & Listener Load Balancing Configuration [ID 244366.1]
Implementing Load Balancing On Oracle E-Business Suite - Documentation For Specific Load Balancer Hardware [ID 727171.1]
Load Balancing in 11i [ID 148516.1]
How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration http://ID 762024.1
Configuring 11i For Load Balancing [ID 117421.1]
JSP Error After JDBC Load Balancing Implementation [ID 269208.1]
How To Setup Load Balance For Workflow 2.6.3 [ID 311803.1]
Regard
Helios

Similar Messages

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

UP loading Customer open item and balance

Dear All,
We are going live in few days. My client had given me a file for all the open items and a file for the balances. We lready have the customer masters in SAP. I have to upload the open items as well balances to SAP using LSMW.
I know for uploading in LSMW i have to call tr code FB01 but what about Balance Upload? Which transaction Code I have to call in LSMW for balance upload.
But how to do.
Please provide me steps for doing that.
Thanks in Advance
Pratiksha
My email id is [email protected]
If possible please send me any documentation on this

Hi Pratiksha & Smile,
At the time of Uploading Cut Over Data, in addition to all the required Gl accounts we would also create Cutover Data Upload clearing Gl Account.
When you are trying to Upload the Debit items in the Trial balance you would credit this Gl account and Debit this GL account when you are trying to upload Credit items in the Trial balance.
Please note the point that the Assets GL Accounts have to be converted to normal GL accounts so that data can be entered, as you may not be able to upload the balances as they would be configured as Recon account and balances cannot be posted directly.
Similarly the Customer and Vendor balances also have to posted separetly as these Gl accounts are also Recon accounts.
Inventory balancces would be uploaded from MM module.
Once all the balances in the trial balance are uploaded, this clearing GL would have a nill balance. Then this Gl account has to be blocked for further posting.
Once the Assets are Uploded individually using AS91,go to T Code OAMK and reset the Asset Gl accounts to Recon accounts.
Regards
Phani

Fault found with opening balances output on Trial Balance report

When running the Trial Balance report and adding "Opening Balances" and taking the "OB from Start of Fiscal Year" option, the relevant opening balances are not shown from the closing balance of the prior period.
All balance sheet accounts should always show a "brought forward" balance if one exists, whereas P&L Accounts should only carry balances forward over monthend boundaries, resetting at the point of a yearend. This is not the output provided by the report.
This issue has been checked on numerous patch levels (including the beta release of 2007a SP01 by a support consultant) and returns the same problem.

Hi Julian,
I checked the functionality by myself and I have two findings:
1) that the Trial balance displays in the opening balance balances for the P&L accounts from previous period.
2) On the other side there is a functionality "Add closing balances" on the Trial balance selection criteria with option "Closing balances before Selected Period Only" which would adjust the presented opening balances for P&L accounts in point 1.
Based on your description I understand that Global Support Center knows about the issue, so I think the point 2 could be used as temporary workaround till the system is corrected.
Best Regards,
Martin Slavik
SAP Business One Solution Manager

Opening balance and closing stock balance

Hi,
What is the way to calculate opening balance and closing stock balance.
Thanks
krishna

have a look Calculate Opening and Closing Stock
Opening and closing balance
Opening Stock and Closing Stock fields and Calculation

Difference in Open Balance As per Trial Balance and General Ledger in SAP

Dear All,
1 ) Whle generating trial balance in SAP B1 for one Business master there is a difference in Opening Balance as per Trial Balance and as per General Ledger how ever closing balance in matching.
Difference As follows
Report Name      ob cr     ob dr           dr                   cr                                  CL
General Balance          614536     19237612.34            18650320.01     1201828.33
Trial balanceB     4521743.19          19237612.34       13514040.82     1201828.33
Is it possible the open balnce should be same in both report. The opening balance as per GL report is correct.
2) I have run the period end closing for Apr- 2010 to Mar 2011 after that I generated the traial balance for Apr-1-2011 where the opening balances for expense account and revenue account is showing technically after period end closing the balance become zero for all closing balance revenue and expenses accounts.
Please note that there are some entries in revenue and expense account in on 1st apr. 2011.
Please guide on this.
Regards
Aarati Kollur.
<a href="http://www.youtubemp3.net/">youtube mp3</a>, <a href="http://www.limewire.name/">limewire</a>

Hi,
I think you should re-visit the selection creteria for the Trial balance.
The Display Opening Balance has two options. If you select from 'Start of Company activity', then it will include every balance of previous year.
Check for the Display Closing balance option as well. As you have performed the Period End closing, the checkbox options can have an impact on the outcome in the report.
Check the selection again.
Kind Regards,
Jitin
SAP Business One Forum Team

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

No, you cannot downgrade your iOS device. That's not supported by Apple.

Zero Balance clearing account shows balance?

HI All,
My "zero balance clearing account" shows balance and hence my trial balance is not matching.
We have posted some WA(goods receipt) documents from MM side and cancelled those due to wrongly entered of internal order in those documents.And Debit line item is missing in those cancelled documents and hence credit amount is showing in my zero balance account.
How can i get rid of this problem and match my trial balance ?
Regards,
Sumeya Offrin

Hi Sumiya,
Check the Trial Balance GL Line Item wise through FAGLL03/FBL3N - G/L Account Line Items.
If any correction reverse the Entry do it again.
One more Check the MM Transactions All materials are reversed are not.
Check the Stock Balance in MB5B through GL Wise Stock Account.
Regards,
Kishore K

What if i load transaction data without loading master data

Hello experts,
What are the consequences if i load transaction data without loading master data?Are there any other factors except the load performance because of SID generations etc and inconsistencies.
<b>What kind of potential inconsistencies will occur?</b>
Problem here is:
when the transaction load starts a new master data such as employee(x) would be have been created in R/3 which does not exist in BW and hence transaction load fails.
Thanks and Regards
Uma Srinivasa rao

Hi Rao,
In case you load the master data after loading the transcation data and if there is any look up at the master data in teh update rules, then you can delete and reconstruct the requests in the ODS/Cube so that the latest master data is pulled in in the data target.
Make sure you do the Apply hier/attr change before doing the delete and reconstruct.
Bye
Dinesh

Balance Sheet or trail balance in Calender year

Dear Friend,
In Configuration in company code fiscal year variant is April to March.
The requirement is to get balance sheet and trail balance in calender year wise.
Can it possible to get above report in SAP standard ?
Please give your suggestion.
Warm Regards,
Nrusingha

Dear,
Yes dear it is possible in standard SAP.
If you have activated New G/L functionality then use Non Leading ledger to meet this requirement.
If you have not activated New G/L functionality then use Special Purpose Ledger.
You will have to create fiscal year variant for Jan-Dec and assign it to any of above ledger whichever you use.
Regards,
Chintan Joshi.

My mac starts up in a white screen with a loading bar and a loading circle please help

My mac starts up in a white screen with a loading bar and a loading circle please help

I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed: OS X: About OS X Recovery - Apple Support

Customer Balance upload vs Vendor balance upload --- URGENT!!!!!!!!!!!!!

Hi Peers
I want to know the difference between Customer Balance upload and Vendor balance upload. How do you upload transactional data upload. If any boby have any documnets for this plz fwd it to me. My email id is [email protected] Its very very urgent
Regards
Rajaram

use report RFBIBL00 (look at its documentation)
A.

Opening Balance Missing from Trial Balance

Hi Experts,
I have a query with the calculation of the Trial Balance in SAP. I have the following simple scenario:
G/L Account 101010 is a Balance Sheet account and has 2 entries:
£50 Debit on 01.08.08
£1000 Debit on 20.08.09
I think it is fair to say that the Opening Balance for 2009 for the account 101010 is £50 Debit.
However, when running the Trial Balance for the period 01.01.09 to 31.12.09, the Opening Balance is not included in the report, even when I select Opening Balance for the Period: OB from Start of Fiscal Year.
If I select Opening Balance for the Period: OB from Start of Company Activity OR do not select a start date, the £50 is included. However, the P&L items on the report then show the postings prior to 01.01.09.
Please advise how I can run a Trial Balance which displays the following:
1. Balance Sheet GL Account Balances including Opening Balances as at the start of the Fiscal Year
2. Profit and Loss GL Account Balances with balances for the current year only.
Thanks
Greig

Hi Jeyakanthan,
Thanks for your answers. However, you misunderstood my question - I want both scenarios on the one report!
In effect I want a Trial Balance which lists Balance Sheet accounts including their balances from the previous period AND Profit and Loss accounts with balance for this Year only.
This type of Trial Balance is a true picture of a company's position.
Thanks
Greig

FI doc not having effect in Balance Sheet or Trial Balance Reports

Hello All,
An FI doc which debits an G/L Account (Part of Asset side) & credits "Creditors Reconciliation account". when I see the effects thru FBL3N it has been posted correctly.
But When I see Balance Sheet Report or Trial Balance Report, such reports are not taking effect of above refered FI doc.
For Ex." GL Account 1234" is having balance Rs. 10000/- (credit balance) (If seen thru FBL3N)
One doc for Rs. 100 is posted which credits this account (included in above INR 10000)
Now when I see Balance Sheet, It only shows balance of "G/L 1234" INR 9900
Please try to resolve the problem. Waiting for your reply.
Thanx & best Regards

Issue resolved......GLT0 table was not updated
Manish Katyal

Manual load balancing or tnsnames load balancing

Similar Messages

Maybe you are looking for