Manual loading of 2lis_11_vaitm

HI all,
I have downloaded the base tables of 2lis_11_vaitm data source namely VBAK, VBAP, VBUP, VBKD into 4 excel files (small size tables data...). Now I have to upload into BW manually to 2lis_11_vaitm business content datasource.
what is the best way to do it and match data like the extract structure?
(I could not do automatic extraction )
thanks
gautam

Hi,
I think it is not possible to load data to 2lis_11_vaitm. U can copy this standard data source structure and load .
If u want to load the data from all these tables best way is function module extractor.
The standard function module for extraction is RSAX_BIW_GET_DATA_SIMPLE. U Have to find the logic how these tables are related and updated functionally.Then implement the logic to get same data as 2lis_11_vaitm.
You can find below links on the function module extraction
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID2067718350DB10090875593766856688End?blog=/pub/wlg/2415]
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008]
Thanks,
Joseph

Similar Messages

Can't manually load music to my iPod Shuffle

I own a 2nd gen iPod shuffle and a 80GB iPod classic. Both are synced to 2 computers. The classic works fine when I try to load music from either computer but the shuffle will only let me add music from my desktop computer. When I try to load music from my laptop, it asks me to sync to the laptop and erase the music I have loaded from my PC. I can't find a way to manually load music from both computers.

That's the way the 2nd Gen shuffle works...

Can you manually load song with IOS6 and iTunes Match?

My office has zero wifi or 3g reception so I like to load several hundred songs onto my iPhone so I can listen at work. However I also like using iTunes Match when I am elsewhere. After I upgraded to iOs6 I rudely discoverd I had no songs left on the iPhone. When I tried to relaod my music iTunes told me that since I had Match enabled I could only do this wirelessly. I really don't want to d/l that much music over the wifi connection.
I turned off Match and manually loaded some music, but now when I try to enable match it tells me it's going to erase the library on my iPhone.
OK am I missing something or do I have to make a choice between Match or manually loading songs

BojPhoto wrote:
OK am I missing something or do I have to make a choice between Match or manually loading songs
Yes. Having iTunes Match enabled disabled traditional music syncing via USB. However, that alert is misleading as it will not actually replace the music that has been synced. It is actually just replacing the "song list."

HT1418 I am having trouble syncing my iphone5 with my contacts on my PC. I have over 350 contacts and it will only syncing 30 of them. What should I do to resolve this without having to manually load each contact please help

I am having trouble syncing my iPhone5 with my PC computer. It is only syncing and transferring 50 contacts were as I have over 350 contacts. I have followed the step by step procedure with no luck. Does anyone have any ideas how to resolve otherwise I will have manually load each number individually please help.

Any errors?
What application are the contacts stored in?

Multiple Session Connections, Manual Load Balance due to temp profiles

Setup:
DC: "2012 r2 St"
TS1: RD gateway, session host 1, user security group 1 "2012 r2 St"
TS2, session host for user security group 2 "2012 r2 St"
Collection 1 > session host 1 for user security group 1
Collection 2> session host 2 for user security group 2
Issues/Goal:
I would like to load balance the 2 hosts so some users log on to one server the others the other server, we originally had one collection with 2 session hosts in there running at 80/20 load balance.
This caused major issues with user profile disks logging onto a temporary profile every time they logged onto the second server, seems to be a bug in the software has many users are having this issue and it doesn’t seem to be resolved yet so we decided to
do a manual loads balance where half of the users are ts1 and the rest to ts2.
I created 2 collections with separate security groups, the problem is when I connect to “remote desktop” rdgateway.domaniname.com.au only the ts1 secuirty group users can log in, it doesn't automatically point the users at the correct server (ts2).
If I manually remote desktop to ts2 it lets me log is as a user from that security group.
I would like to the gateway to automatically point my users to the correct session server/collection based on the security group they are in. Can someone tell me what is going wrong here?
If i browse to the rdweb.xxx.xx and log in as a user from TS2 group it only shows the correct ts2 and lets me log in, its just remote desktop app that has the issue.

how have you setup user profiles? user profile redirection or UPD? if you have a server outside of your TS farm acting as a file server to serve the profiles and your GPOs are setup correctly and are actually being applied correctly, you shouldn't see temp
profile issues
what you are doing now seems like a huge overhead and sort of defeats the purpose of having a connection broker when you're not taking advantage of load distribution

Difference between process chains and manual loading

Hi all,
I just posted a thread asking the difference between the manual loading and the process chains, but surprisingly Iam not able to see my thread.
Anyways, I will be very thankful if anybody can help me out in explaining the difference.
Thanks in advance,
Preethi.

Hi,
To see you thread change you settings. process chians allows you to auto mate your data loads, roll up process, compression, psa deletion etc. and you can maintain a sequence like load depending master data and loading transcation data.
by manual load you have to do all the thinngs manually, like executing an info pack, compressing the request, delete psa request etc, this things also you can schedule. but you dont know the dependencies.
Regards
Sankar

Date/time icon and other movable icons on menu bar cannot be loaded on startup,but it works if manually loaded

Strange things happened since my mbp 13' (MD-101) was upgraded to 10.8.4 ----------- time icon, battery icon,and language icon (these icons can be moved when held Command key and drag) cannot be loaded on startup, but they still can be loaded when you get into System Preferences and manually turn them on, as well as iStat Menus
However, some other icons didn't bother, things like BetterTouchTool, NewsBar. They are immovable!! I guess it is the key factor that the icon is movable or not making the difference.
Someone please lend me a helping hand?
I've attached some pictures in order to make my situation easier to be understood.
these icons can't be loaded on my loggin in.
but they can be loaded manually
however, these icons will be loaded on startup
I've almost despaired to resolve it . Thanks for your help!

I have a similar issue. When the computer goes into "Hibernate" mode -- that is, it loses power while sleeping and it writes the contents of it's memory to disk in order to boot into that exact configuration when woken up -- many of my icons when Apple-Tab'ing to another application appear as static. They look like a slightly colorized version of the "static snow" you see when tuning into a station that doesn't exist on a UHF antenna television. Also, icons in Chrome such as web sites "favorite icons" or favicon.ico (the icons that appear in the URL bar and bookmarks) will be scrambled in the same fashion , at first , until the actual icon is loaded.
Between this, my menu bar and finder icons not displaying, and being unable to boot into safe mode, I'm getting quite ******. I have no idea what the **** is going on with my Macbook Pro. The issue of the scrambled icons actually existed prior to installing an SSD and doing a fresh install of Mountain Lion. I may end up throwing in the towl and re-installing the operating system but I'm sure SOMETHING will happen. It seems the latest update, 10.8.2, is absolute garbage.
What the ****, Apple? And I really don't want to take the computer to the morons at the Apple Store. They are not "geniuses" by any measure.

IOS 5: Manually load REMOTE images in HTML emails ...?

I've been clamoring for this feature forever, and Apple finally added it in 3.0.... the ability to NOT download remotely hosted HTML images in emails [mainly to prevent additional spam]..... unfortunately, if you turn off the loading of remote images in your settings, you're unable to load them in manually on a per-email basis.
SO CLOSE!
Does anyone know if this is possible now on iOS 5? Would love it to work like their desktop mail app

varjak paw wrote:
Settings -> Mail, Contacts, Calendars -> Load Remote Images -> Off
Regards.
Yes that's how you turn it off. Now that you have it off, and an image arrives whose images you want to view, you can't do it. You can turn the setting back on, but then all the other emails whose images you don't want to open, will open, leaving you vulnerable. There should be a button in the mail viewer to load images when viewing an e-mail if this setting is off, just like Mail in OSX. I think it's an oversight.

Manually load in REMOTE images in HTML emails ...

I've been clamoring for this feature forever, and Apple finally added it in 3.0.... the ability to NOT download remotely hosted HTML images in emails [mainly to prevent additional spam]..... unfortunately, if you turn off the loading of remote images in your settings, you're unable to load them in manually on a per-email basis.
SO CLOSE!
Hope this feature comes eventually

varjak paw wrote:
Settings -> Mail, Contacts, Calendars -> Load Remote Images -> Off
Regards.
Yes that's how you turn it off. Now that you have it off, and an image arrives whose images you want to view, you can't do it. You can turn the setting back on, but then all the other emails whose images you don't want to open, will open, leaving you vulnerable. There should be a button in the mail viewer to load images when viewing an e-mail if this setting is off, just like Mail in OSX. I think it's an oversight.

New tabs in Firefox 4 must be manually loaded

If I open a link in a new tab via the context menu or by ctrl+clicking, the new tab contains the URL of the new page but nothing else. In order to make the tab load, I have to manually highlight the text in the address bar and press enter on the keyboard. Has this happened to anyone else using Firefox 4? Many thanks to anyone attempting to help; it is much appreciated!
Miscellaneous:
I think I still have the "tab mix plus" extension installed from FF 3.6, but I cannot see it in the add-ons manager (although that is an entirely different question that I have already asked on this forum).

Do you have the Ask Toolbar installed? This is a known cause of this problem.
Check by clicking the Firefox button, go to Add-ons, then Extensions. Remove it if you find it in there.
If not, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Would trying to manually load NSS Internal PKSS #11 Module create a problem or would nothing happen without a filename in the load window under Security Devices?

Would clicking the load button while NSS Internal PKSS #11 Module is selected and accepting the pop-up window without filling in any more information create a problem for the Firefox 8 program?

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

HT1535 Unable to manually load music and video to ipod touch

Since upgrading my iTunes and ipod Touch to the latest versions I can no longer manually sync my videos and music. Any ideas?

Did you check to make sure the Manually manage music and videos option was still enabled from under the iPod's Summary tab in iTunes?
B-rock

Manually load .class outside package?

I am trying to use this example:
http://tutorials.jenkov.com/java-reflection/dynamic-class-loading-reloading.html
to load some class files outside a package.
public class MainClass {
public static void main(String[] args){
    ClassLoader classLoader = MainClass.class.getClassLoader();
    try {
        Class aClass = classLoader.loadClass("com.jenkov.MyClass");
        System.out.println("aClass.getName() = " + aClass.getName());
    } catch (ClassNotFoundException e) {
        e.printStackTrace();
}But that only seem to work for classes in a package. If I do:
    ClassLoader classLoader = MainClass.class.getClassLoader();
    String classPath = C://test//IOUtil.class
    try {
        Class aClass = classLoader.loadClass(classPath);
        System.out.println("aClass.getName() = " + aClass.getName());
    } catch (ClassNotFoundException e) {
        e.printStackTrace();
...I get the exception:
java.lang.ClassNotFoundException: C:/test/IOUtil.class
In the API:
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/ClassLoader.html#name
it says:
Any class name provided as a String parameter to methods in ClassLoader must be a binary name as defined by the Java Language Specification.
Examples of valid class names include:
"java.lang.String"
"javax.swing.JSpinner$DefaultEditor"
"java.security.KeyStore$Builder$FileBuilder$1"
"java.net.URLClassLoader$3$1"
I assume the error occurs because I don't supply a 'binary name'. But how do I specify a binary name for a local .class file on my disk?

fedevaps wrote:
Hm not sure I understand, I have now tried to replace:
String classPath = "C://test//IOUtil.class"With:
String classPath = "C.test.IOUtil.class"
String classPath = "C.test.IOUtil"
String classPath = "test.IOUtil"All gives the same error. Do you mean that I need to add c:\test to my classpath before trying to load the class?
I Assume that I need to tell the compiler where to look for the .class file, since its not located in any package and is also outside my classpath.
Edited by: fedevaps on Jun 16, 2009 5:54 PM
Edited by: fedevaps on Jun 16, 2009 6:04 PMThe thing you give the ClassLoader is a proper class name. Since IOUtil is in the default package the proper class name (I think, since I've never used the default package) is "IOUtil".
Now, if the directory it sits in is not in your class path I'm not sure you can get the ClassLoader to load it. Maybe you can, but I wouldn't know.

HT1277 not able to manually load a mail account?

Greetings,
The option to turn off the "auto" option does not appear when I try to load a mail account and the auto load keeps loading a IMAP and I want a POP? (Yahoo or AT&T)?

Kind of resolved it. I just installed Mail 1.3.1-- downgraded from 3.2 and NOW - with all same pref settings and connection smtps, etc-- and NOW I can send and receive .mac emails and other email accounts.
So that is the key-- the glitch is in the new versions of Mac Mail. So that problem is NOT solved. You can go online to "mac freeware" google'd and then search for "Mac Mail 1.3.1" and get it for free to download.

HT5590 Manually Load OS X Server Cached Updates

Can we add updates manually to the update cache?
The idea being to import updates via CD/USB to a stand alone network of computers and run an update cache from a mac mini on that network.
Thanks.

If you manually replace components used by the server software you are going to almost certainly break things especially Server.app (for administration) and in this case you would also almost certainly break Profile Manager and the Wiki server.
If you want to use Apple's server software then you have no real choice but like the rest of us to wait for Apple to include any upgrades.
As examples the bootpd and racoon software and even the ntp client included by Apple are not merely different versions compared to the latest stable releases but are actually heavily customised by Apple and behave significantly differently. As far as I am aware the Apache used by Apple is pretty standard and the main difference is the name and locations of files Appe uses, i.e. not only do Apple not use the standard httpd.conf file and location but the process of installing SSL certificates is very different to a standard Apache system.
It is possible to upgrade some components e.g. perl with minimal risk of break Apple services, it is also possible to install separate copies of items like Apache and run them separately to Apple's. However such a separate install of Apache would not serve Profile Manager up for you.

Manual loading of 2lis_11_vaitm

Similar Messages

Maybe you are looking for