Manual needed

Is it just me or does going through these forums point to the need for a manual for Itunes software? For instance - what do the symbols mean? When one of my tunes is 'greyed out'? When there are/are not check marks beside a tune/podcast? How is the filing system automatically set up and what changes can I make to it, if any? What effect does changing the name of a podcast have (some series are not named so that they play sequentially)?

Like the information found here?
http://www.apple.com/support/itunes/
Or in the Help Menu? Typing the word "symbols" into the search box in iTunes Help brought up a comprehensive list of the symbols and they're meanings. One of the selections under the Help menu is Keyboard Shortcuts, one I find especially useful.
Searching Support will also give you access to the Knowledge Base articles. They are quite extensive.
If none of those sources of information are sufficient, there are numerous 3rd party books available.
Best of luck.

Similar Messages

Printer manual needed

I posted this question some time ago, but haven't been able to find my original post to see if it was answered. Where/how can I get a manual for my DeskjetD2680 ??? I have checked 'email me when someone replies' but apparently no one did.Please answer here ? And how do I find previous posts ? Thank you

Hello there,
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=3964065
I hope this is what you need. If not, I'll browse some more.

Pavilion a305w; Lost my manual, need to know how to copy 3 1/2 Inch Disk to CD.

I have a Pavilion a305w which has both 3 1/2 inch disk bay and cd bay, and have primarily used 3 1/2 disks. Now have a new computer with only cd bay. Need information currently on 3 1/2 to be transferred to cd. I have been under the impression that can be done on the a305w, but have misplaced my manual and don't know how to do it, assuming it is possible. Questions: Is it possible, and if so, how?

Copying a 3.5" floppy disk to CD-R is a three-step process, as listed here
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Urgent! SRM210 manual needed

Hi,
Can somebody help me with manual SRM21O?
It's really urgent.I will reward full points.
My e-mail:[email protected]
Thanks,
Mandar

Hi,
can you please send me the manual SRM21O?
My e-mail:[email protected]
Thanks,
Regards.
Gianfranco.

Zen v manual needed

I just was given a "new" refurbished zen v, still in the sealed box, and for some reason there is no disc included.
I downloaded the Creative Media Explorer from this site, so I can use the player but the only manual I have been able to find is the quick start manual, very little information there. I searched on this? forum, and any links to the full manual don't have the manual for? this player.
Can anyone please? give me a link to the full manual for a zen v?

Hi Bobwise,
There is a knowledge base article on the usage of this player. Hope this is what you are looking for.

(link to )10.7 installation manual needed...

Is there any site from which I can download oracle apps 10.7 (char mode)
' Oracle Applications Installation Manual '. i searched for it but couldn't find. any pointers to it are appreciated.
thanks
-ramesh
null

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

Service Manual needed for Qosmio X875-Q7390

Does Toshiba have a service manual available for download or purchase? By service manual I mean a document that shows the internal component and how to dissassemble the laptop. This would be different from the User's Guide, which I already have.
Solved!
Go to Solution.

No.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Adobe Photoshop Express Organizer - help manual needed

Please excuse me if I'm posting this request to the wrong forum, but I'm looking for a tutorial on how to use the online Adobe Photoshop Express Organizer, which I access through photoshop.com. I can't locate a tutorial or instructions on it anywhere! Although I've mostly figured out how to use it, I'd like to know the difference between an "Album" and a "Group Album." Also, what's a Shared Album versus a Private one? An answer to these particular questions would be very much appreciated.
Thanks!
Jeff

Try here:
http://forums.adobe.com/community/psexpress

K7N2 ILSR Manual needed

I have been to the link on this site but it wont let me d/load it is there a problem or am i a total donut?

k7n2 delta
http://us-download2.msi.com.tw/support/mnu_exe/mbd_mnu/E6570v1.3.exe
k7n2g
http://us-download2.msi.com.tw/support/mnu_exe/mbd_mnu/E6570v1.1.exe

Microsoft hosted network virtual adaptor - setting ip is impossible - need help

I am able to create hostednetwork and access internet when I have public or private wifi
when I try to do the same with my reliance data card and share the internet to other device, it failed
problem Is the ip address in hosted network client is disappearing as soon as exit the window.
by default it should be 192.168.137.1, 255.255.255.0 but I am unable to set it manually.
need help
I am waiting for the solution for more than six months

reliance data card?
which means.. its a broadband USB modem(CDMA type)
but now i have reinstalled the os. i got the solution for sharing internet from such a cdma type USB modem to hostednetwork.
the sol is
Creating a new connection( set up a new connection or network) in network and sharing centre .
assing the dial up code, user name , password in that setup.
dial the new conncetion
now your system is connceted to the internet (just like the process done by the software given in that usb modem to get connected to the internet)
now we can share this internet to the hostednetwork client.
so click on the new conncetion -> setting> sharing>share to other dev
fornew hostednetwork
cmd window as admin
type the following cmd in cmd window
netsh wlan set hostednetwork mode=allow ssid=funonly key=12345678
netsh wlan start hostednetwork

ONE LAST HURRAH: Before saying Goodbye to my Beloved MSI Eclipse!!!

I already posted this article in the motherboard thread but seems like this is the best place to post this
ONE LAST HURRAH: Before saying Goodbye to my Beloved MSI Eclipse!!!
Well it has been two months since I purchased this MSI Eclipse SLI board and while waiting for its bigger brother MSI Eclipse Plus, I would like to try out a new board from another manufacturer. Before I pass this board to its new owner, I decided to give it a little review to so that other people who will be upgrading to i7 platform will have some idea how good or how bad this board is.
A few months ago and maybe until now, Eclipse is the flagship board of MSI in terms of i7 based motherboard. Its bigger brother MSI Eclipse Plus has already been sighted in some forums but no definite date yet on when it will be available in the market.
The Box
The size of the box was way bigger than my old P45 motherboards. It is actually almost 2x the size of the conventional ATX board box.
Upon opening the panel on the box, you will see a lot of information about the board! You will also see the added stuff from MSI like the Green Power Genie as well as the awesome Creative Xfi! Yes, a creative Xfi Extreme Audio PCIe sound card was included on the package.
Upon opening the box, you will see a plastic container (I am assuming that this is anti-static) that contains the motherboard, DLED2, Green Power Genie and creative X-fi.
There’s another box that contains a lot of stuff! MSI is as usual generous in giving their customers all the things the need to fully populate the board. This includes the cables needed to populate all the sata and ide slots, cross fire and SLI cable, additional USB bracket, ESATA bracket and the M connectors. All the manuals needed to setup the boards are also included.
The Board and Layout:
The board for me is pretty sexy! It comes with a black PCB. The RAM slots and the other expansion slots are only blue and black in color which is a perfect combination for an intel based platform. The IOH and the ICH10R is actually covered by a copper heatsink with heatpipes connecting them. Well, personally I do not like this design since I do know that x58 generates a lot of heat. The VRMs also come with a copper heatsink but no heatpipe . As far as I understand from the box information, this is MSI’s split thermal design as well as protection from warping.
MSI also provided 6 RAM slots and they come in blue and black sockets. Do yourself a favor by putting the ram in the black slots. I previously ran into problems of the system hanging in “ DDR ini “ and later found out from reading the manual and searching the web that the black slots should be populated first.
The board came with 10 sata ports! 6 of them in 90 degrees are connected to the ICH10 and the 4 are actually by the jmicron chips attached to the board and also function as
HW raid. Connect 2 HDD on sata 7 and 8 or sata 9 and 10, do some stuff in the BIOS and you are all set to run the system in raid 1 (mirror) or 0 (stripe). I have had no chance to test the raid 0 + 1 since I don’t have 4 identical drives. It also comes with an IDE slot for your old parallel IDE HDD and/or ODD.
The expansion slots come with 3 pci x16 slots, 2 pci and 2 pcie x1 which I believe is more than enough to suffice your daily needs. The bottom part of the board came with a power, reset and dled switch along with MSI’s OC jumper.
The back panel is not that good looking. Well it’s the same back panel style of their P45 series board. It doesn’t matter anyway since it is at the back of the chassis and what concerns me the most is functionality. The board came with 8 usb ports at the back, 2 Gigabit lan, 2 esata ports, a 1394 connector, a cmos reset switch and the conventional PS/2 ports for mouse and keyboard.
Bios and overclocking
I just captured the most important portion on the bios which is the Cell Menu. It is the overclocking tab on MSI’s BIOS
Overclocking and Benchmarking Results
Since I have not installed anything yet on my new board, I decided just to compare the stock and overclock result from this board.
Below are the lists of components that I will be using
Intel Core i7 920 2.66ghz ( cooled by Thermalright HR 01 plus )
MSI Eclipse SLI – Beta BIOS 1.45
MSI 8800gtx (well a bit old but still reliable)
Team Extreme ddr3 1600 @ 8-8-8-25 rated 1.65V
Western digital Raptor 74gb 16MB cache
I tried setting up this board one last time on my DIY open system using the components above. And Good thing that my ever energetic and reliable assistant is always there to help … hahahaha
SPI Stock and 4Ghz OC Results
Stock = 15.313s
4Ghz = 10.405s
PC Mark 05 Stock and 4 Ghz OC Result
Stock = 9745
4Ghz = 13136
3DMark 05 Stock and 4Ghz OC results
Stock = 13388
4Ghz = 14289
3DMark vantage Stock and 4Ghz OC Results
Stock = 8160 ( 33530 on CPU score )
4Ghz = 8315 ( 43567 CPU score )
Aquamark Stock and Overclock
Stock = 131812 ( 18685 CPU score )
4Ghz = 179261 ( 23139 CPU score )
I tried playing with bclock since I have seen people in several forum saying that their boards( not specific to MSi eclipse ) / i7 proc cannot go above 200 or maybe just above 200 bclock. After doing some tweak I was able to get 215 bclock and the max I was able to get is 218, All the test that had been done are just after vista installation. No tweaks done on windows.
SPI = 10.343 ( 19 x 215 )
SPI = 10.030s ( 19 x 218 )
Wrap-up / Conclusion
I really don’t want to let this board go but I don’t have extra budget to buy and try new boards from other manufacturer so that I can compare the result. So right now I am stuck with selling this just to buy another x58 board (of which I will try to post a mini review soon)
I did encounter IOH temperature issue when I first bought this motherboard. IOH temperature is at 65C and this still goes up while running benchmarking tests. I made minor modifications on the board and as far as I know, it did not void the warranty. Below are the modifications that I have made:
1.   Removed the violet thermal paste that MSI used and replaced it with Artic Silver 5.
2.   Removed the plastic pushpin and replaced it with a bolt and plastic nut.
3.   Added a 40mmfan that is just enough to take out the heat from the IOH
Guess what, the temperature after these is just below 55C even under benchmarking (done during night time and I would expect that this will go to probably 60 degrees during daytime given the tropical climate in the Philippines).
I was able to overclock my i920 at 3.6ghz without even adjusting anything on the voltages. Meaning they are at stock settings! I managed to reach 4.0 ghz by simply adding 0.040v (around 1.29 Vcore only)
Pros
-   Easy to overclock board
-   Supports both SLI and crossfire
-   No issue on bigger after market cooling
-   90 degrees placement of ICH10’s sata port
-   Server grade VRM’s and Capacitors used
-   Creative Xfi included
Cons
-   Only one SLI bridge included. It would have been better if a tri SLI connector was given by MSi.
-   IOH temp an issue for my board. Need to monitor and maybe try my modifications.
-   Power/Reset/DLED Switches location will not be accessible if a 3rd video card is installed.
Other thoughts
-   It would have been better if the BIOS of the eclipse comes with nominal values on the Cell Menu. This is to serve as guide for the users if they are trying to alter the voltages.
-   Maybe swap the ide and the sata 7 to 10 ports? It is better looking if all 10 sata ports are on 90 degrees. It will also ensure that even if you use 2 or 3 video cards, it will not hit any of the sata 7-10 cables if you use them.

I can see you got your use out of it. I hope the new owner tortures it, too!

MBAM will not auto encrypt the system partition

First after reimaging, I need to use tpm.msc to prepare the TPM, as the TPM is running in reduced functionality. The computer reboots and clears the TPM. After the reboot, the logs no longer show any new errors.
However if the option “Configure the number of noncompliance grace period days for operating system drives” is set to zero; nothing ever happens. There are no errors in the logs.
If “Configure the number of noncompliance grace period days for operating system drives” is unconfigured. The user is prompted to encrypt, if the user choses to encrypt everything works correctly.
We are using HP Probook 6545b notebooks
Below you see the MBAM policy.
I must have missed something in the BIOS or the policy, but what?

I have checked the MBAM node in Event Viewer, policies are applying successfully. We are not using a PIN. I am beginning to believe this is a hardware limitation. As on a newer notebook I only needed to use TPM.msc to manually, prepare the TPM and after
reboot automatic encryption began. I need to solve the issue with manually needing to prepare the TPM.

How do i get AE to work as well as old d-link access point

i have a d-link DSL-604+ which is great - works for broadband acts as a hub and provides wireless at one end of my long thin house. my main mac is plugged into it and works great. i ran some time ago a cat5e cable under the floor boards when we moved in to the other end where the wireless doesnt reach (just) and there i had a d-link dwl-900ap+ connected by the wire to the main router. it was setup with the same ssid and a different channel. my windows work laptop - depending on which end of the house i was would pick up the ssid and connect to the stronger signal no problems i could even walk up and down and it would switch over. now they are both b only and i have recently bought a new airport express with the plan of using airtunes upgrading speed of link and eventually changing my laptop to a mac. now on the old system my router would act as DHCP giving a 192.168 address. i seem unable to setup the AE to do the same thing. i can stream audio to my hifi no problems - this is cool. i can set it up to create a wireless network and give it a different ssid and channel but it doesnt seem to want to choose the same ssid. i can manually change it to the same - is this what i should do? however when i do this the AE trys to act as DHCP and gives a 10.1 address to the laptop which is odd - if i then move the laptop constantly tries connecting to both APs and changes its ip address. if i tell the AE to use 192.168 it says this conflicts with a wan setting. is there a way of saying get dhcp from elsewhere?
i am sure this is really straightforward and i am missing something. the dlink was easy i told it it was an access point - my network was called xxx and that the network had dhcp and it just worked.
should i be using the join a wireless network option instead of the create a network? but isnt this for people who are extending their networks wirelessly? i ran a cable.
thanks

i seem unable to setup the AE to do the same thing. i can stream audio to my hifi no problems - this is cool. i can set it up to create a wireless network and give it a different ssid and channel but it doesnt seem to want to choose the same ssid. i can manually change it to the same - is this what i should do?
Yes you will manually need to enter the SSID.
however when i do this the AE trys to act as DHCP and gives a 10.1 address to the laptop which is odd
You also need to configure the AirPort Express (AX) to bridge (not share a single IP address).
should i be using the join a wireless network option instead of the create a network? but isnt this for people who are extending their networks wirelessly?
You should be using the "create a network" option.

How do I setup CalDav and CardDav servers on my Mac to enable local 'cloud' syncing in Mavericks

I've decided to start off a new thread having initially posted on How to locally sync an iPhone with OS X Mavericks? iCloud is NOT an option.
It is clear to me that it is possible to establish syncing locally without going outside one's own home, and without internet access. I am bugged by the fact that the previous service has gone without any user focussed warning, but I am keen to find a way of solving the problem. If you are just frustrated, I'd be grateful if you can keep your annoyance off this thread.
My guess is that a CalDav and CardDav server hosted on my own Mac can be set upt to sync with my iPhone (3GS) either on a Computer-to-Computer (ad hoc) network or via my own home LAN. The trouble is I am not network/Apache savvy enough to use it.
I am reluctant to fork out an additional amount for the Mavericks server as I don't have any other foreseeable need for it, but Mavericks comes with Apache pre-loaded and there is a very light, simple and free open source CalDav and CardDav server in Baïkal. The trouble is I am not apache/network savvy enough to make use of it, and basically I am stumbling along in the near dark with terminal.
There are some good resources for setting up Apache and for setting up Virtual Hosts which would host my personal 'cloud', and Baïkal also comes with setup guides as well. The trouble is, I don't quite have enough knowledge to marry the two together. Is there anyone contributing to or watching this thread who has the know-how to do a proper step by step guide for running Baïkal on Apache as installed in the Mavericks OS, and setting up a local 'cloud'.
AFAICT the problem with the resources I have found is that the Apache stuff I've found doesn't particularly focus on running Baïkal, and the Baïkal documentation is not specific to Apache on Mavericks. Is there anyone out there who can give me some help with this?
Can anyone help - please?

I've now downloaded ownCloud 4.5.13 and followed the installation instructions in the Administrators Manual. I am slightly concerned to read under MacOS: "This section of the manual needs to be revised."
However, I have followed the instructions there, and step 5 has taken me to the web setup page where I have created an account with user name and password.
Then I went to Calendar, and from the Calendar menu chose Add Account… In the dialog that followed I chose Add CalDAV Account. I chose Account Type Manual and put in the username and password I used when setting up the ownCloud account. For the URL I followed the manual and put: http://ADDRESS/remote.php/caldav/principals/username/ substituing 'localhost:8888/ownCloud' for the address, and my ownCloud username for the username. (If I just used 'localhost:8888' for the address it produced the message: "The URL http://localhost:8888/remote.php/caldav/principals/[myusername]/ encountered HTTP error 404. Make sure the URL is correct.".)
So far I am semi-sucessful. It has created a Http://Localhost:8888/Owncloud account on Calendar in which I have been able to creat a test calendar and an event. I have also deleted the event, but Calendar will not let me delete the calendar. Once I inserted a second calendar the Delete command became available, but failed with this notice: "http://localhost:8888/ownCloud/remote.php/caldav/principals/[myusername]/ is not a location that supports this request." A retry deleted the name of the calendar, but left it otherwise intact. The account now has a grey triangle next to it which when clicked produces the following: "The request (CalDAVCalendarSplitDualTypeCalendarQueueableOperation) for account “Http://Localhost:8888/Owncloud/Remote” failed."
I think this may be resolved by an ownCloud setting. I will see if I can track this down. Has anyone here got any thoughts?
[I'm sorry I seem to be unable to prevent the editor from creating clickable links from the URLs I am posting]
Message was edited by: James Richards

Re. Sales order Created with reference to Contract

Hi Guru's,
I have create a Contract with Sold to party, Ship to party and material combination. So when i am creating a Sales order for the same combination system is not proposing the availability of contract. I manually need to assign the contract to the sales order.
Am i missing any configuration. Can any one suggest the solution for the same.
It would be of great help.
Thanks in advance.
With Best Regards,
M. Rajendran.

Hi Rajendran M,
Maintain the copy control in VTAA
select your Sales document type & contract document type
In Header
Data T- 051
Data T- 101
Data T- 001
copying req- 001
check mark copy item number
in Item - select yourcontract item category
Data T- 151
Data T- 102
Data T- 002
FPLA- 251
copying req- 301
check mark copy schedules
x update document flow
pos/neg qty - +
pricing type- G
Let me know if your problem is solved
Regards
Pradeep

Manual needed

Similar Messages

Maybe you are looking for