Manual Override of Slide Transition

Hello. I'm new to Keynote and can't seem to find out a good answer. I've set up a set of slides to run automatically - each slide is shown for 20 seconds. Is there a way, during the Keynote presentation, to override this? For instance, if I want to move forward or backward, none of the keys work - the slides keep advancing at the 20 second intervals. (This is possible to do in PowerPoint.)
Thanks in advance for your help!

I purchased the Keynote Remote for the iPhone and that doesn't work. And the iTunes Remote only works for iTunes.
Any other thoughts would be appreciated!

Similar Messages

Automatic slide transition timing

I'm putting together a presentation with multiple actions on each slide. The actions are all timed and I want each slide to be displayed for exactly 30 seconds before transition to the next slide.
But I can't figure out how to set this up. Is the automatic slide transition delay timed from the when the slide appears or when the last action finishes? I tried working it out both ways and it doesn't make sense.
e.g
I have a slide where a picture appears after 20 seconds. I then set the auto slide transition to 10 seconds. I expected the slide to change at 30s but it actually does it nearer 40s?
What's going on?
Thanks

I tried a new experiment with a fresh, new Keynote presentation. Plain white background. Three words that animate, each On Click. Move In, Bottom to Top. .2 second speed. Dragged my WAV narration file to the slide. Recorded the presentation, animating each word manually at the appropriate point in the narration. Playing back the recording in Keynote looks and sounds as intended. Exported to QuickTime. Narration starts, first animation doesn't appear in time. As soon as first animation appears, audio cuts off completely. Other two animations appear, with no audio.
I even tried a different font this time (a standard OS X font). This can't be a problem with my presentation file.
Something is wrong with the QuickTime exporting function. I'd love to know if anyone has had success (visuals and audio in sync) exporting to QuickTime after importing your narration (or sounds) by dropping an audio file on the slide.

Script keynote to change slide transitions

any ideas how to script keynote to change all the slide transitions across multiple documents to the same thing? I've got 200 or so documents with the wrong transition set so it would be great not to have to do this manually.
thanks

you will tap and hold on the slide in side bar you wish to promote or demote, and slide it above or below the frame you wish to promote/demote.

Slide transition animation and image in the slide master

Hi,
I placed an image in one of the slide masters, because I want that image static in the slide background. But when I add a transition to the slides made with that master, the image I placed is animated too. Should I do something else in the slide master so the image I placed is not affected by the slide transition?
Macbook Pro Retina with OS X Yosemite and Keynote 6.5
Regards.

There is no such thing as an object transition, objects are animated using Builds or Actions: Inspector > Animate
I'm referring to "Object Effects" in the Transitions pull down (Object Push, Object Revolve, Object Flip, etc). So yes, technically there is an Object (transition) effect where objects transition between slides.
Backgrounds do not animate when using Builds or Actions.
True. However, if you use the last version of Keynote (before 6.5 and the Yosemite update) and place an image on the master slide it will not animate when applying many of the Object Effects.
When an action or or Build is applied to an objet, the slide or the background does not animate, only the object animates.
Same point as I made above.
No EnzoFT said, "when I add a transition to the slides made with that master, the image I placed is animated too."
EnzoFT was using a slide transition therefore any object on a slide will be included in the effect.
If you try what I said above in the previous version of Keynote, it will not animate. However, I found out how to make an image on the master slide NOT animate in Keynote 6.5 (I made a comment earlier in the thread about this). Open the master slide, select the Slide Layout, change the background to Image Fill, and the image won’t animate from one slide to the next when you apply an Object Effects transition to a slide.
That is a very narrow minded personal opinion.
Selecting a transition, Build or Action should be based on how it enhances the presentation and what you want to animate; the slide, the object or both.
Narrow minded personal opinion?!? Do you really need to go there? I was simply making an observation.
Use Builds or Actions.
There has been no change; Transitions affect the whole slide, Builds and Actions affect objects on a slide.
If you try what I mentioned above there has been a change. Thanks for offering advice, but doing a little research in the future before replying to issues will help with providing more accurate information.

Need to manually override vbup-lfsta for fully invoiced order

We have two sales orders in production that have been fully invoiced, but due to an old bug in our shipping point determination logic, the shipping point was accidentally cleared in the sales order, thereby showing it as incomplete (which is correct). Because these documents have fully delivered and invoiced, we cannot update the shipping point but need a way to manually change VBUP-LFSTA from A to C (something similar to VL_complete, but for a sales order). I am basically looking for the OPPOSITE of program SDVBUK00, which corrects incorrect VBUP and VBUK settings. I need to manually override the settings since these are very old documents, cannot be reversed, rejected or changed and are not needed to show on the incomplete orders report because they were shipped and billed.
Thank you in advance for your time!
Regina
Edited by: Regina DeMita on May 13, 2010 4:59 PM

Hello Regina
I have the following suggestions for you.
1) The only way these docs may be bothering you is by showing up on the incomplete orders report. If you eliminate them in that report, then you should be fine I guess. So my workaround is use Tcode V_ UC and create a variant excluding these 2 documents from the list (using the Sales Document field in the General doc data section and the option to exclude single values) and make this variant the default for all users.
2) Use Z-code to change the status. See OSS notes 1177165 and 617501, the second one particularly because it has Document # in the selection criteria. They are meant to correct the Revenue Recognition status of sales documents and may be you can copy and adapt one of them to suit your situation. Or best ask SAP to provide one as they have done program from note 1177165 based on customer request.
Hope this helps.

Manual override option for Unit selling price in Order line level.

In OM R-12
Our client wants manual override option for Unit selling price in Order line level.
But there is no solution available to fulfill this requirment. To be able to manually override the price on a Sales Order line you
must have defined a manual modifier that qualifies for the Sales Order line in question. Without a suitable manual modifier the price cannot be changed.
This is current standard functionality.
Anybody can give some suggestion/workaround to override selling price in Order header level without using the modifiers.
regards,

Hi Kashif,
I'm finding it little difficult to buy Oracle Support's feedback with regards to R12 functionality for direct List Price update without using any modifier (manual or whatever). After all it is Oracle's product and they should know better. But test results in Solution Beacon's Vision 12.0.6 instance (http://www.solutionbeacon.com/tools_r12vision.htm) and documentation updates in R12 (R12.0.4) OM user guide & implementation manuals potray a different picture.
After your last post, I did a test in Solution Beacon's Vision 12.0.6 instance with following details:
OM: List Price Override Privilege = "Unlimited Access" at user level
OM: Discounting Privileges = "None" at user level
No manual modifiers defined and Order status = "Entered"
I could display the "List Price" field from folder under Line Items >> Main tab, override the list price to a new value and save. The unit selling price showed the new value based on updated List Price as soon as I tabbed out of the list price field after overriding. After saving it showed the new selling price. _Please note that under Line Items >> Pricing tab there is another "List Price" field and that is not editable_. For such overrides "View Adjustments" (from Line >> Actions) will not show any adjustment details as it is a direct update of list price.
Also please note that, if "Enforce List Price" checkbox is selected for the order type, the list price cannot be overridden even if the profile option is set to "Unlimited Access".
Document References:
Oracle® Order Management User's Guide
Release 12, Part No. B28099-03, September 2007 >> R12.0.4
Page No. 10-74
+Note: Note: If any order line for an order has the Calculate Price Flag value equal to Partial Price or Freeze Price new order level adjustments will not be applied or allowed to be overridden. _The profile option OM: List Price Override Privilege controls your ability to override the unit list price. If you have this profile set to Unlimited, you may modify the unit list price by editing the current value displayed_. The original list price is saved in a hidden folder field, so you can display it if necessary+.
Page No. 10-94
User Procedures
_A new profile option, OM: List Price Override Privilege controls whether or not you can update the List Price_. It is enabled and updated at the application, responsibility and user level. It is not user visible and updatable. The values include+:
- View Only: This is the default value. If set to this value, the current behavior is retained, which means unit list price field is protected.
- Unlimited Privilege: If set to this value, you can override the unit list price field from the main tab and immediately see selling price adjusted accordingly.
To use Override List Price:
+1. Navigate to the Sales Orders/Quick Sales Orders window.+
+2. Enter the header and line information, including the ordered item and quantity, then tab to the next field. The Selling Price and List Price display+.
+3. If the profile is set to Unlimited Privilege, you can enter a new list price in the List Price field. You can either proceed to the next line or save your work+.
+4. You can see the new, entered list price, and if there are automatic discounts applied, they will be based on the new list price+.
+5. If the folder has been modified to show the Original List Price, the original list price displays+.
+6. To change the List Price again, go to the list price field and enter a new value, replacing a previously entered value. If Audit Trail is enabled for List Price and a reason is required, a window appears to enter a reason and optional comments+.
Note: Subsequent overrides of the List Price, after the order line is saved, can be captured by Audit Trail, depending on the setup of Audit Trail (entered or booked state) and any processing constraints that have been set up.
In the OM Implementation Manual also there are notes related to this.
OM Implementation Manual
Release 12, Part No. B25975-03, September 2007 >> R12.0.4
You can refer to page no. 2-59, C-4 etc.
Thanks
Supro

Enterprise Mode site list and manual override

I have a small question / issue when using Enterprise Mode.
We have enabled it using GPO by specifying both a site list and the Enable settings for manual override. This works fine but I don't know how to reset the manual override if somebody flicks the EM mode for a specific site.
I just want to tell IE to forget all manual overrides and apply the sitelist as delivered.
I tried to look in the registry, in the %AppData% fodler, even cleared the IE cache but IE still remembers the user overrides.
Any help will be really appreciated.
Thanks, Nic.

Hi Nic,
As the official documents said, this registry key [HKEY_LOCAL_MACHINE\SOFTWARE\ Policies\Microsoft\Internet Explorer\Main\EnterpriseMode] “Enable” = “” | {URL:port} can also be used to collect manual overrides. By configuring the “Enable” key with a
valid URL and port, Internet Explorer will initiate a simple POST to the supplied address whenever a user enables or disables Enterprise Mode. This effectively helps customers crowd-source lists of compatible Web apps from their own users, which may decrease
triage and testing costs.
Approximately 65 seconds after Internet Explorer 11 starts, it looks for a properly formatted site list. If a new site list is found, with a different version number than the active list, Internet Explorer 11 loads and uses the newer version.
This is designed by default, and we cannot reset the by preventing the changes.
We may try to logon script to re-deploy the original site list to reset the site list settings.
Kate Li
TechNet Community Support

I want manual duration for slide show - Remove music?

I have a slide show of six drop zones from iPhoto albums. I would like to have manual duration, but that choice is grayed out and not selectable. iDVD added the default music uninvited. I was able to set the volumes to minimum on both the title and slide shows but I think I need to get rid of the music completely to get the manual duration. But I can't seem to make that happen. Please help.

From the Help Menu in iDVD6:
Setting slideshows to advance manually
Slideshows in iDVD advance to the next slide automatically, with each picture remaining on the screen for 3 seconds. If your slideshow doesn't have a soundtrack, you can set it to advance manually. Viewers can then click the Next or Forward button on the DVD remote control to advance to the next slide at their own pace.
To set a slideshow to advance manually:
1. Double-click the button for your slideshow in the DVD menu to open the slideshow editor.
2. Choose Manual from the Slide Duration pop-up menu.
3. Click Settings and select "Display navigation arrows" if you want to display right and left arrows on the screen as a visual reminder to the viewer to click the Next button on the remote control to advance to the next slide.
4. When you are finished, click the Return button to exit the slideshow editor.
By sdmacuser at 2007-08-23
Works exactly the same way with photos shared from your iPhoto library (with the exception it reads "Library" as opposed to "Slideshow" when added to iDVD's entry Menu page).
Hope this helps but if not come on back.

Slide transitions are choppy only on replay

When I watch a video I've created (either using the F4
preview or after publishing to SWF), the initial view functions as
planned. When I click my 'Replay' button on the last slide,
transitions between slides with a 10 or 15% transparent image don't
transition properly. The video "jumps". Here are my details...
Using Captivate 3
Projects range in size, but are fairly average-to-small
* 15 - 30 slides
* 0:50 - 1:50 in length
2 slides next to each other each have a .PNG image to fade
out the background, so text can be read more easily
* 10% or 15% transparency set on the images
* No transition set between slides
* No Fade in or Fade out set on images
'Replay' button jumps to Slide 2. Get the same behavior
jumping to Slide 1.
If I use the 'Restart/Replay' button on the Playbar, the
slides transition smoothly. Here's a sample of what happens:
GlitchyExample
Anyone experienced this? Anyone got a clue?
Thanks,
Marty

kidogo said...
quote:
Which "best practices" are you referring to? If there an
official "best practices" document I may have overlooked? I've
configured the video using Captivate's features, so I'm not sure
how the results are "predictable." It works beautifully on the
first run, and the glitch doesn't occur until the replay. That
sounds like a timing issue inside Captivate (my junior member
analysis).
The "best practices" that I refer to are written, but
in a thousand posts and emails over years and years, not as an
intentionally constructed volume of work available by itself.
Sorry. Your "junior member analysis" is not to be taken lightly,
and I apologize if I made it sound like it was being so construed.
My apologies are hereby offered, if any are needed.
I think now I might have mis-read your original post, as it
seemed then that you were assigning the transparency and some other
attributes to the PNG image prior to insertion to Captivate,
thinking those attributes would be mimicked within Captivate.
Reading your last, it appears that was an incorrect translation on
my part. I do see what you refer to as "glitchy", however, and
don't have a fix for it aside from leaving off the objects that
seem to be causing it - or accepting that a "replay" can be worked
around or avoided entirely. Sorry I don'thave anything to offer
that is more to the point of your complaint. Maybe someone else ...
regards~
Larry

Making slide transition appear in build overwiev

In the new Keynote '13, I'm not able to set a slide transition animation, appear after a previous build. The slide transition doesn't even appear in the buildoverwiev window.
I have a headline, I have assagined an build out animation to, this starts with a click, after that has happen I would like the slidetransition to happen automatically. But as it is now I can't choose to have the slidetransition happen after previous, as it dosen't appear in the buildoverwiev. I can only force the slidetransition with another click.
Any fix to this?

To be correct; the latest Keynote is version 6.1 not 13.
Slide transitions are not builds, they are a separate type of effect. Only Builds appear in the Builds Order List. Builds are effects for objects, transitions are effects for slides.
The effects you want can easily be achieved however;
to add the build to the object on the slide:
click the object on the slide to select, Inspector > Animate > Build Out > Add an effect
to add a transition for the slide:
click the slide in the Navigator pane to select, Inspector > Animate > Add an effect >
select a transition effect
to action the transition after the build:
in the Start Transition dropdown menu, seect Automatically

Powerpoint Animations Flicker Between Slide Transitions

Version
Captivate 6.0.1.240
Output type
Flash SWF, and MP4
I have a powerpoint (2010) I imported into Captivate. The slides do contain animations, mostly fade in, and fly in. No exit animimations, all are enterance. Captivate is using the animation times set in PowerPoint as I expect, and that works well for me. I did add narration audio using Captivate for each slide. After I have everything set, I produce the project as MP4 successfully.
However, then I view the video when the slides transition to a slide that has animations, there is a quick flicker that shows the animations for the slide even though they are not really seen until sometime into the slide. This effect is very distracting and takes away from the impact of the slides having seen a flicker of the exposed animations. It almost seems it is adding a video frame of the final slide.
I have tryed the following:
-Reapplied the patch
-Added fade slide transistion in Captivate (This only makes the flicker last longer)
-Tried the different produce settings
-Tryed produce to Flash, but same effect.
I am looking for a solution to this, or a workaround I should be concidering. My final option is to pull the MP4 into Premier to remove the frames, which is not why I bought Captivate.

I am seeing the same thing. I just recently updated to ver 6. This is very much not good.
Also, by buttons keep resizing themselves to little tiny boxes if I change any properties.
Please fix these fast!

Varying the Slide Transition Time Interval in Slide Show with Music

I have this old iPhoto 4.0.3 version in my PowerBook. Is it possible to create a slide show that's put to music? More importantly, can the transition from slide to slide be varied (e.g., one slide changes after 4 seconds; the next slide changes after 10 seconds; the slide after changes after 6 seconds, etc.) or am I limited to one consistent slide transition interval? Do I need to upgrade to a newer version of iPhoto? Or do I need to use an entirely different application to do varying slide transition time intervals?
Thank you.
Michael

No, you can't vary the time interval in the same slide show.
There are many ways to produce slide shows using iPhoto, iMovie or iDVD, but they all have one thing in common: they reduce the quality of the photos to that of a movie still frame and sometimes limit the number of photos you can use.
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie 6 as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!

Audio cuts out at slide transitions when played on TV

The audio on the DVD is my own narration, nothing downloaded from iTunes--and it works fine both in the iDVD viewer and DVD player on my computer. But in the DVD player attached to my TV, the audio cuts out at each slide transition, which are dissolves.
The image files are relatively small, and there are only 25 slides. I burned the DVD at 4x rather than maximum speed to enhance quality. In preferences, I have "best quality" rather than "best performance" checked for the encoder settings.
Please let me know if you have any ideas for a fix.

Is the audio embedded in the video or did you do a voice over?
If it is embedded in the video, you might try extracting the video and then adding the transitions.
Sue

Slide Transition

Hi
I have recently updated to Keynote 6.2. Using this I have opened a presentation created with an earlier version of Keynote. The first slide transition is supposed to be onclick. However as soon as I run the presentation, the first slide is transitioning to the next slide almost immediately.
I have tried to reset the transition, but to no effect. Anyone any ideas please?
Thanks
A

Right, Thanks for that - I was unaware that there was an issue. Of course, having opened the presentation with 6.2, 5.3 wont open it again.
Hey Ho!

Question about slide transition

Hi there,
I've got a question about slide transition in Captivate 6.0.
By default the slide transition is define with 3 sec. I would like to have transition done manualy, with the navigation, but not after a certain time.
Is it possible ? For now I've insert a next button. But I would prefer to do this via the navigation.
Thanks for your help.

Hi there
Presently the ONLY way to accomplish it is by having an object on each slide that causes the slide to pause. Buttons, Click Boxes, Text Entry Boxes and some of the Widgets cause this behavior.
If you feel it should operate differently, please consider submitting a Wish Form to ask for the capability to be added to a future version. (Link to the Wish Form is in my sig)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Manual Override of Slide Transition

Similar Messages

Maybe you are looking for