Manual para principiante de Oracle
Quiero aprender Oracle y me gustaría me recomienden un manual para principiantes en español. ¿Alguien me puede ayudar?
Refiérase por favor http://www.oracle.com/global/es/tecnologia/index.html
y llame el número libre para las preguntas.
Andreas
Similar Messages
-
Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.
Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise. -
Creation data warehouse par l'outil oracle warehouse builder (OWB)
Bonjour,
Dans le cadre de mon PFE je veux construire un data warehouse par l'outil Oracle warehouse builder.
je cherche des exemples et un tutorial en français pour faire l'ETL d'une base de données de l'ERP JD Edwards.
SVP, aidez moi et merci.Bonjour,
For examples try:
http://www.oracle.com/technetwork/developer-tools/warehouse/otn-collateral-086331.html
If you need them in French try changing the country / language on Oracle site, not sure what's available though as my French is not good enough to let me read documentation in that language.
Bonne chance -
How to Create Manual Standby for a Oracle 11g RAC with ASM to Single Instan
Hi All,
I have a task to configure a Single Instance Standby Database with ASM for 2-node Primary RAC+ASM database.
Version using : 11.1.0.6 Oracle 11g --- *" STANDARD EDITION "* Please note datagaurd will not be supported in standard edition.
Primary database - 2 -Node RAC using ASM storage (All datafiles, redologs, controfile and archive logs)
Need to setup a single instance standby database manually and than using scripts to transfer the archive logs from primary server to standby server to do recovery time to time.
Please let me know if there are any configuration document(s) which can help me to set the manual standby? or need your kind help to give your valuable ideas how to go in above situation.
Thanks in advanceNiall Litchfield wrote:
El DBA wrote:
Well if the archive logs are stored in ASM on the primary nodes, you almost definitely want to be using RMAN to access them. Then to transfer between primary and standby there are many options, this is essentially the step that Data Guard takes care of - so if you (and I) are running Standard Edition, this is the part to "worry" about.
I'm not really sure what you mean by this:
As in standard edition the archive destination will be on ASMI don't think the Edition of Oracle (Standard or Enterprise) dictates where and how you store your archive logs, but it's possible I've misunderstood what you mean...SE dictates that database storage for RAC will be ASM, including archive log files. Anything else is not officially supported. I haven't tested but it may be that you can use LOG_ARCHIVE_DUPLEX_DEST to specify a local filesystem for archive log files as well.
If that doesn't work you'll have to script rman "backup as copy" jobs regularly and then transport the results of that.
Niall Litchfield
http://www.orawin.info/
By the way, it seems Robert has been pretty helpful, it's polite to give him some points dude. And since this is your thread, not mine, give him a "helpful" from me too :p
El DBA
Incidentally if you are forced down the RMAN backup as copy route then this will likely throw your current backup retention strategy somewhat, you'll need to think carefully about when an archivelog can be deleted following backup, how many times it might be backed up and so on. I do understand, and have argued for, the use of SE RAC. I also understand and have argued for and implemented manually managed standby a number of times. However by the time your primary database is a RAC instance and you need a standby for DR etc then you really have to look very seriously at whether Standard Edition is still the right investment or not. You will be spending a lot of DBA time managing and troubleshooting this, and you will find that it is less reliable than the off the shelf solution. I suspect that you are very close to the point where an EE installation becomes a worthwhile investment here.
Niall Litchfield
http://www.orawin.info/ -
Modifying up kernel para's in Oracle 9.2.0.1.0
In Pre-installation requirements 2-21 in Installation Manual,
it says:
9. Write a script to initialize these values during system startup,
and include the script in init files.
What is the script to be run?
Is it to be in rc3.d?
Thanks in advance.
- MahendraWell, heres my test (10g, for I dont have a 9.2.0.1.0, but I think it´d show the same result):
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select *
2 from t1;
ENO ENAME
1 KARTHIK
SQL> select *
2 from t2;
DNAME
VENKATRAMAN
SQL> select *
2 from t1
3 where eno in (select eno from t2);
ENO ENAME
1 KARTHIK
SQL> alter table t2 add (eno number);
Table altered.
SQL> select *
2 from t1
3 where eno in (select eno from t2);
no rows selected
SQL> alter table t2 drop (eno);
Table altered.
SQL> select *
2 from t1
3 where eno in (select t2. eno from t2);
where eno in (select t2. eno from t2)
ERROR at line 3:
ORA-00904: "T2"."ENO": invalid identifier
SQL>
But he is getting output of table T2 too se his last postI don´t think so, because he didn´t SELECT it. Would be nice to just copy & paste the output...
Regards,
Gerd -
Errors and Queries regarding manually create database in oracle 9i
Create database manually with following steps:
1) Create SID
C:\> set ORACLE_SID=mynewdb
2)Create suitable database directories within oracle directory.
Create folders udump,cdump,bdump within C:\oracle\admin\mynewdb\
3)Create PFILE
4)Create a password file using:
C:\> orapwd file=C:\oracle\ora90\database\PWDmynewdb.ora password=oracle
5)Create an instance of database
C:\> oradim -new -sid mynewdb
6)Start sqlplus:
C:\> sqlplus\nolog
7)connect / as sysdba
8)startup nomount
9)Run CREATE DATABASE script
'Database Created' prompt display on screen.
11) Run two scripts i.e. catalog.sql and catproc.sql
Following are errors and queries related to database creation. :
Errors+_
Following error occur when start database:
Total System Global Area 336359616 bytes
Fixed Size 282816 bytes
Variable Size 234881024 bytes
Database Buffers 100663296 bytes
Redo Buffers 532480 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
For start database I give following command, but it gives me same error:
STARTUP OPEN PFILE='c:\ORACLE\ORA90\DATABASE\initmynewdb.ora'
or
STARTUP FORCE OPEN PFILE='c:\ORACLE\ORA90\DATABASE\initmynewdb.ora'
or
STARTUP OPEN
or
STARTUP FORCE OPEN
Queries_
*1)There are one databases in my machine name "orcl"*
when I give commands
C:\> connect / as sysdba
C:\> startup nomount
When I run "connect / as sysdba", in this which database instance connect?
how the oracle will know to start mynewdb database instance in nomount? although I am not create database.
*2) Step "startup nomount". In this, which database started in nomount?*
*3) There is no reference for PFILE in CREATE DATABASE script. How the oracle will know which is the PFILE for database mynewdb?*
*4) I create password file, how the oracle will know password file for which database (in this case mynewdb database)? How to map password file with particular database?*
Thanks and Regards,
SachinHi,
not any thing new from the already given answer. But, i hope this examples gives more clarity.
Answers below:
1) ORACLE_SID is the answer
2) see the output below.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 61785680 bytes
Fixed Size 730704 bytes
Variable Size 58720256 bytes
Database Buffers 2048000 bytes
Redo Buffers 286720 bytes
SQL> select instance_name from v$instance;
INSTANCE_NAME
mytestdB
SQL>
SQL> show parameter db_name
NAME TYPE
VALUE
db_name string
mytestdB
3) Check environment variables for ORACLE_HOME variable will let you know the location of the PFILE. By default it will be ORACLE_HOME/database (windows), ORACLE_HOME/dbs (LINUX/UNIX).
SET command will help you or use widows options.
In some other cases, the PFILE contains the link to it with IFILE value left in PFILE which should show the location.
4) Check environment variables for ORACLE_HOME variable will let you know the location of the password file. By default it will be expected in ORACLE_HOME/database (windows), ORACLE_HOME/dbs (LINUX/UNIX).
Regrds,
Vasu. -
Videos muy oscuros. Ayuda para principiante .
Saludos. Soy novato en el manejo de videos caseros y agradeceré su ayuda en estos dos temas muy puntuales:
1.- Generalmente las condiciones de filmación en interiores se me dan con poca luz y por lo tanto los videos me salen muy oscuros. La pregunta es cómo puedo hacer para iluminar la película resultante. Tengo Premiere Elements 2.
2.- Favor recomendarme algún software sencillo para recortar porciones indeseadas de una película y volverlas a pegar. Me refiero a clips Mpg2 que resultan al segmentar películas DVD.
Gracias anticipadashola, bueno yo te recomendaria que trates de tener buena iluminacion a la hora de grabar tus videos,pero si quieres corregir iluminacion despues de grabados, agrega un efecto de video que se llama brillo y contraste, esto ayudara a darle iluminacion a tu video, aunque perdera un poco de calidad en la imagen, solo trata de ser cuidadoso al aplicarlo y no irte de paso en la cantidad de brillo y contraste.
respecto a lo de cortar partes de video que no quieres, y volver a pegar, esto lo puedes hacer con premiere elements. espero te ayuden mis comentario y espero haber entendido bien tus preguntas. saludos -
Guía para principiantes (Español)
La guía está desactualizada, es de mayo, mientras la versión en inglés es de este mismo mes de agosto.
¿Vale la pena imprimir la de inglés o los cambios no son tan significativos y con la antigua española ya va bien?
Gracias por adelantado!
PD: Por cierto, no se si será por el acento en "guía", la ñ en "español" o los paréntesis, pero con la extensión de pdfdownload.org para firefox no se puede descargar el .pdf
Saludos! Este es mi primer post y espero que no sea el último, creo que Arch que me va enganchar de lo lindo :-PHola alehox y bienvenido a Arch!
Por el primero, lo siento que no hablo muy bien el Español. Espero que puedas entenderme.
Hace un momento que no he instalado Arch, pues no puedo decirte si los cambios son tan significativos. Creo que no pero más vale estar seguro. Te recomiendo imprimir las dos y utilizar principalmente la guía inglés, consultando la guía española cuando encuentras que la guía inglés no está completamente clara. Teniendo en cuenta que la mayoría de documentación está en inglés, será quizás un buen ejercicio.
Después puedes actualizar la guía española, si se necessita.
De otra maniera, en la página "historia" puedes comparar dos versiones una al lado de la otra, por ejemplo el último de abril y el actual. Allá ves todos los cambios pero me parece mas fácil seguir la guía inglés actual.
alehox wrote:creo que Arch que me va enganchar de lo lindo :-P
Lo creo también.
¡Buena suerte con la instalación!
Last edited by Xyne (2009-08-29 18:24:08) -
Is there any manual about using DB2 as storage of Oracle BPEL Manager?
Hi
thank you for reading my post
Is there any manual about using DB2 as database of ORACLE BPEL manager ?
any one tried to port and test the system on DB2?
Thanks.Hi,
as you can read in the manual:
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28980/overview.htm#sthref26
Oracle Database Lite, if you use the SOA Suite Basic installation option
Oracle Database Lite is configured to support Unicode. DB_CHAR_ENCODING is defaulted to UTF8 in the polite.ini file.
Oracle9i Database Server
Oracle Database 10g
The BPEL schema includes PL/SQL packages. They will not run on DB2...
The datasources are configured to Oracle. You will have to change them to DB2...
and it is not supported ;-) -
Oracle Test Manager - Import of Manual Tests - Fails with ORA-12520:
Hi,
This issue occurs when we are trying to import manual tests into the Oracle Test Manager.
The import fails when we try to import more than 300 records. The error message in the log
is as shown below:
Driver's SQLSetConnectAttr failed
ORA-12520: TNS:listener could not find available handler for requested type of server
9:50:30:020 - *** DB Exception *** State:S1000,Native:12520,Origin:[Oracle][ODBC][Ora]
State:IM006,Native:0,Origin:[Microsoft][ODBC Driver Manager]
State:S1000,Native:12520,Origin:[Oracle][ODBC][Ora]
No one can logon to the application after this.
According to the DBA the application is using up all the processes in the Database and hence it fails.
When we restart the application service, the number of processes in the database goes down
and the application goes back to normal state.
We keep running into this issue when we try to import >=300 manual tests. (This is not an issue
when runs are imported.)
Anybody else facing this issue? Any ideas as to how this can be resolved?
Thanks
ArunaHi,
I had some problems with. So, consider the following:
Simple XLS file :
testname owner testdescription Expected Result
test1 wayne Login into User Homepage User can view login prompt
View Accout Details User can see account details
Create simple report User has access to reports section
Save as pdf .pdf generate button is available
send email email button is active
log off User can View log off page
So we have four fields, teatname,owner,testdescription and Expected Result.
When we import a test (select Test tab, then project->import data, and select .xls file)
Make sure Select Type is set to Manual Tests
Map testname -> TestCase ID
owner -> Owner
testdescription -> Test Step Action
Expected Result -> Test step expected result
Make sure Select Type is set to Manual Tests. You should then see one test with all the steps.
Regards
Wayne.
p.s. Thanks Alex!!
Edited by: byrne_wayne on Sep 20, 2010 3:29 PM
Edited by: byrne_wayne on Sep 20, 2010 3:33 PM -
New free Oracle XE database has a PHP manual
I wanted to point out that the newly announced free Oracle XE Beta version of the
Oracle database has a PHP manual. See
http://www.oracle.com/technology/products/database/xe/index.html
The direct link to the manual is:
http://www.oracle.com/pls/xe102/to_toc?pathname=dev.102%2Fb25317%2Ftoc.htm&remark=portal+%28Getting+Started%29
The manual is a step by step introduction to building a simple application (it constructs
pretty much the same application the Java and .Net manuals for XE do), so don't
expect any deep revelations about PHP
Post any PHP on XE feedback here or on the XE forum:
http://www.oracle.com/technology/products/database/xe/forum.html
-- CJFWIW, I just came across this post from Harry Fuecks about XE and PHP:
http://www.sitepoint.com/blogs/2005/11/01/oracle-10g-xe-and-php/
Chris -
Creating Oracle 11g Database Manually on ASM on 11g R2 Grid
Hi:
Earlier added this issue alongwith Grid installation. Only Jorg replied to me but could not find a complete solution. So thought of starting a new thread.
Wanted to know if any one of you have successfully created Oracle Database Manually on ASM on Oracle 11g R2 Grid.
I have installed Oracle 11g R2 grid (grid user) and Oracle 11g R2 DB software succesfully (oracle user).
Now trying to create a database manually on ASM as Oracle user.
First I create an pfile in $ORACLE_HOME/dbs
then I started by db on nomount stage. when I create a spfile on to my ASM diskgroup I get
I have created 2 diskgroups '+DGASMSPFILE' (ASM Spfile) and '+DGDBDATA' (for database)
Grid is up and running.
From Oracle user:
Have created a sample initDBRAC.ora
Now I want to create Oracle Database Global Spfile into '+DGASMSPFILE'
export ORACLE_SID=DBRAC
$ sqlplus / as sysdba
SQL> create spfile='+DGASMSPFILE/spfileDBRAC.ora' from pfile;
ORA-17502:ksfdcre:4 failed to create file +DGASMSPFILE/spfileDBRAC.ora
ORA-12547: TNS lost contact
"Oracle user" should have privileges to access ASM diskgroup right? What is the permission set for /dev/sdc* (earlier it was root:oinstall I changed it to grid:oinstall even then no difference.
Trace output:
ASM_DISKSTRING= /dev/sdc*
***********************************************************************1st trace file
Fatal NI connect error 12547, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser)(CONNECT_DATA=(CID=(PROGRAM=oracle@skyit6)(HOST=skyit6)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS-12547: TNS:lost contact
ns secondary err code: 12560
nt main err code: 517
TNS-00517: Lost contact
nt secondary err code: 32
nt OS err code: 0
ERROR: Failed to connect with connect string: (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser))
Wed Jun 01 01:27:07 2011
ERROR: slave communication error with ASM; terminating process 16772
Errors in file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc:
Regards
DineshHi Sebastian:
When I installed grid software, oracle db software and created oracle db manually things worked fine.
When I restart the RAC environment I found the following issues:
1) all the resources does not come up automatically, once i issue crs_start -all all the services comes up. (most of the resources related to node1 comes up but cluster resources related to node2 does not come up) crsctl check crs shows that things are online.
2) wanted to recreate a database manually after restarting the RAC enviroment. To start of as usual tried to create a spfile in ASM disk "Create spfile='+DGDBSPFILE' from pfile'
I get ORA-17502:ksfdcre:4 failed to create file +DGDBSPFILE'
12547: TNS: lost contact
looks like permission problem.
The same command worked before restarting the RAC environment. Pls let me know if I am missing out anything.
Is it because i am unable to access ASM instance.
3) As you had mentioned tried to set the sbit by executing the following statement:
$ /opt/grid/bin/setasmgidwrap o=/opt/oracle/product/11.2.0/db/bin/oracle
should this be put into "rc" folder in linux so that it gets set everytime linux starts up. because once i restart the permission get changed.
I should execute it from grid user to change the permission of 'oracle' binary in 'oracle user' right?
Can you explain me why is this required (sbit).
Thanks.
Regards
Dinesh -
Manual Install of Oracle Text and XDB for 11g
I can't find the Metalink manual install docs for Oracle Text and XDB. For unknown reasons the DB was created with out them. I see the docs for 9i and 10g, but not 11g.
Thanks!Hi,
I think you are in APEX forum.
This question seems more suitable for installation forum: Database Installation
Also, please see if this thread helps: How do I install ORACLE TEXT
Ta,
Trent -
How to integrate Oracle Tutor Desk manual Index with Oracle ApplicationsR12
Hi,
I have created a desk manual Index and related HTML files in oracle Tutor 14. Can anyone help me in integrating the desk manual index with the Oracle Applications Help.
My questions are:
-> In what top shd i upload my files using help Upload ?
-> How do i integrate the desk manual index HTML file with my applications help?
Has anyone done this before . If so , Can u please guide me through the process.
Thanks.
Edited by: Vyas on Apr 8, 2012 12:52 AMHere are some instructions - please let me know if this is what you are looking for.
Kind Regards,
Emily
-> In what top shd i upload my files using help Upload ?
Create Upload and Download Directories on Middle Tier.
The download path must be a location on the machine that hosts the Application Server - ie, the "middle tier". Directories for the upload (for example, /u01/tutor/upload) and download (for example, /u01/tutor/download) functions must be created on the middle tier.
***These directories, as well as any future subdirectories, must have full read/write/execute permissions. The Help Utility will automatically create subdirectories, so the permissions must be set correctly before the Help Utility is used.
Verify that the HELP_UTIL_DOWNLOAD_DIR directory points to a directory that can be accessed from both the JServ tier and the Concurrent Manager tier.
From the EBS
EBS R12 System Administrator > Profile > System > Find System Profile Values
- Verify Site is checked
- Verify Profiles with No Values is checked
- In the profile field, enter %help%
- Click Find button
Update system profile values with the correct paths.For example:
Help Utility Download Path > /u01/tutor/download OR /dbfiles/applcsf/outbound
Help Utility Upload Path > /u01/tutor/upload OR /dbfiles/applcsf/inbound
Help System Root > FND:LIBRARY
TCF:Host > http://<hostname.domainname>
TCF:Port > <port number>
-> How do i integrate the desk manual index HTML file with my applications help?
Use Help Builder to add the DESK_MANUAL_INDEX to the Help Tree
To learn all the features about customizing Help Navigation Trees, refer to the Oracle Applications System Administration User Guide.
EBS R12 System Administration > Help Administration > Help Builder
When Help Builder first opens it may appear as a tiny screen in the upper left corner, if this happens, maximize the screen. You may also have to resize the screen as you may see the entire screen at first.
- Enter FND in the Node Application field.
- Press the Find button on the Find Trees Window.
This should bring the Trees tab region forward with a list of available trees.
- Scroll down and find FND | US | Applications Help Library in the Trees tab
- Select and double click on it.
This will open the Applications Help Library tree in the left frame
- Expand the Application Help Library by clicking on the + next to it.
- Click the New Node icon on the toolbar.
- Enter the following information in Properties window.
The next items assume the default Desk Manual Index terminology is used.
If your organization uses or plans to use different terms, adjust the entries in the various properties field accordingly.
Prompt: Desk Manual Index
Description: Desk Manual Index
Data: @DESK_MANUAL_INDEX
Or enter the exact Desk Manual Index file name if it is different than the example.
- Click the View button to verify the link works.
You may have to experiment with using the @ sign. It may not be required.
Click the Apply button.
The Desk Manual Index will now appear as a Node under the Application Help Library. If the name is NOT fully displayed, click on the - (minus) sign to expand it.
Link does not work
- Change the information in the Data field.
- Delete the @ and add .htm extension
Example: DESK_MANUAL_INDEX.htm
- Click the View button to verify the link works.
- Click on the Save icon. -
Manually Download Oracle Linux 6 Repo
Hello,
Is there a site or method in which I can manually download the entire oracle linux 6 repo and its updates from http://public-yum.oracle.com/repo/OracleLinux/OL6/
I want to be able to burn the updates to a dvd. I do not want the servers I have to connect to the internet outside of my company's intranet.
Any ideas?
ThanksThis works very well for me: https://github.com/kikitux/public-yum-downloader
It creates your own local repository rather than DVDs.
Maybe you are looking for
-
Dual display options, Mac Mini
I have connected an 1440x900 LED display via the Thunderbolt port and have set it up to be a secondary display with a DVI display 1920x1080 as primary . However, using the Thunderbolt port for a VGA interface seems like a bit of a waste! Is there any
-
Problems trying to SUM after returning date on first row in all rows
Hi, I'm having problems with a calculation in a table report. We've built a Discoverer report that looks at long term absence of an employee. The long-term absence period must be worked out based on a 2-year rolling period from the start date of the
-
I need to set up folders in I pad and I phone to sort received and sent email
I need to learn how to create folders on I Phone and I pad to sort incoming and sent emails I need to save. Hope someone can help me?
-
Installing ipod touch 2.0 on 2 or more
is it possible to install ipod touch 2.0 on multiple ipod touches after you purchase 2.0 or do you have to buy 2 orders for 2 ipod touches
-
Hi, I am working with Oracle Designer in a project where we need to asses the Business Process Model of the customer, mapping it in Oracle Designer. The Customer wants to see the relationship between Business Entity and Organization Units and Process