Manual PR should be checked MRP Parameters
Hi Experts
I have set MRP parameters Re Order Level, Minimum Lot size and Maximum Stock parameter for a Material. Now I can generate PR automatically but my management requirement is that we should be able to create manual PR also and i know that we can create the same but management wants to control the quantity of manual PR through MRP parameters.
Please suggest how can i achieve this goal.
Regards
Ajay Goel
"double" requisitions happen often because of a lack of knowledge. People do not know the global processes and do not know where to check to see if there is already a requisition or even an order.
If someone got the authority to create requisitions then he is also a kind of responsible for his doing, hence he should be trained well.
If you would run MRP again for this item then you get an exception message, an unprocessed MRP created requisition would even be removed automatically.
It is quite normal that manual creation of requisitions is still allowed, even you run MRP, especially to cover an extra demand that is not yet included in any of the planning parameters. To restrict this manual requisition then to the normal values maintained in the MRP view of the material makes it impossible to solve exceptional situations without changing the material master.
Similar Messages
-
What iPod settings should be checked to automatically sync
Hello,
At iTunes what iPod settings should be checked to have iTunes automatically add the latest songs. I played around with them that I can't remember how they were before I messed with them. To be clearer - I mean where you can see that long status bar that tells you how full your iPod is and there are 4 boxes to checked or not checked.
Thank you,
Nick M.Thank you for your reply,
Yes, that's the section - what I want to know is which of the 4 boxes there should be checked in the Options section for normal operation?
Right now I have checked:
Open iTunes when this iPod is attached
Sync only checked songs
(unchecked Manually manage music)
Enable disk use
With these settings I have to now eject the iPod after syncing.
I know this isn't a major problem - still, it would be nice to solve it.
Thank you,
Nick M. -
'MRP parameters for plant not been maintained'.
Dear Friends,
While creating Sub-contract PO (Item cat-L), system issued below error.
'MRP parameters for plant 9999 have not been maintained'
Message no. 61273
Please help how to rectify..
Regardsu2026. RAMANHi
Check T.code OPPQ for your plant. If it is not maintained, maintain it after consulting with PP consultant.
Regards
Antony -
How to exclude the manually create SAP PO from MRP Run?
Dear all
There is this situation that due to the long procurement lead time, certain PO is created manually in SAP in advance based on the sales order enquiry made by customer. (In normal case, we will create a sales order in SAP and then run MRP to create PR to converted to PO)
Most of the time, customer will confirm their enquiry so that we can create sales Order in SAP and this will make it just in time for our raw material to arrive. However, when the PO is created in advance without triggered by MRP caused by Sales Order, this PO booked quantity is often taken up by the consideration of MRP RUN by other sales order. And if later customer confirms their enquiry and there is no PO stock for this due to this stock is already considered by other sales order.
Is there a way that I can exclude the manually create SAP PO from MRP Run?
Please advise.Dear Csaba Szommer
Thanks for your reply.
Sorry for confusing you.
1. We are in a MAKE TO ORDER (MTO) environment.
2. There is this situation that due to the long procurement lead time, certain PO is created manually in SAP in advance based on
the sales order enquiry made by customer. (In normal case, we will create a sales order in SAP and then run MRP to create
PR to converted to PO).
3. Most of the time, customer ABCwill confirm their enquiry so that we can create sales Order in SAP and this will make it just in
time for our raw material to arrive.
4. However, for the PO that is created in advance (not created by PR triggered by MRP caused by Sales Order), this PO
On Order Quantity is often taken up by the consideration of MRP RUN by other sales orders.
5. It creates problem that if later this customer ABC confirms his enquiry and we create SAP Sales Order in the system, the
stock of PO created previously is already eaten up by other sales orders.
We are using MTO and do not use Forecast. And MTO Strategy is set at the material master level and as such I do not think we can simply modify the MRP Strategy to suit this unique case, as for the very same material, in one PO it should be considered by MRP but in another PO, it should be excluded from MRP Run.
Is there a way that I can exclude the manually create SAP PO (for the case of Customer ABC email enquiry without creating Sales Order in the System first) from MRP Run? -
D/ Friends,
Weu2019re creating PO for Subcontracting & choosing Itm Catg. as Subcontracting (L). In it the issue is that when we click on Components in Material data tab at itm level, system is giving err: u201CMRP parameters for plant XXXX have not been maintained. Messg no. 61273. Procedure: Maintain MRP parameters in Customizing.u201D Why this err is coming & how to resolve it? Pls advice.Dear Siddhant,
what is the MRP type using
Go to OPPQ
click on Copy option from plant give as 1000 , to plant your plant
then click on copy, then if required make changes inside then save
then Go to OMDU , click on materials requirement planning
then for ur plant just mark a tick
Then check the result
Regards
Madhu -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn’t decide what she wanted so she stayed with old phone but this locked me into a new 2 yr contract . Within a wk one of the new iPhones started turning on and of like 10 –15 times a day. Wk 2 it turned off and would not turn on again . It was my sons who was in college at the time so we talked and he took it in to a Verizon store where he was told I need to come in since the account was in my name. He was away from home , Verizon could see on account it was his phone they said it was not abused, they could not even turn it on , they sold me the phone give him another phone maybe even a loaner till he gets another. So now I need to go to store and explain to 3 different people this is my phone and my son has it and I need a new one. what a waste of time after about 2 hrs and talking to different people and yes they said there were notes on his account from other person he had talked to from different store. So I finally walk out with a receipt in hand and being told I would have a new phone in a couple days. As I sat in my vehicle thinking this is stupid I looked at my receipt and noticed it said droid on it so back into Verizon I went. The salesman said that’s what your son has on his account. My son had activated a friends old phone so he has one since VERIZON REFUSED to give him one. Another hr 3 people and yes they can see he had a new iPhone and notes on it from other store. Sometimes sorry just doesn't do it. I was now late for a appointment . Now I walk out and have been told I will get a new iPhone in the mail in about 2 wk Yes 2 wks again I bought it there just give me a new one and you send old one back. I will also get a new droid that I have to send back because they said they cant cancel it . In about 3 days I get the Droid and sent it back Verizon mistake and a waste of my time . After waiting over 2 wks and not receiving a new iPhone back to Verizon I went . I am now bitter at Verizon after doing 20 yrs of business with them. 3 people 1 hr later I was told it got delivered to my post office . I got the tracking num called the post office and they say o yes that was the droid. Go back in to Verizon another hr of explaining I walk out being told I will get a new iPhone in a couple of days, We’ll see . Once again I got the phone in your store just give me a new one . Do you realize how much of my time you have wasted ? do you care? O what is Your Policy ? How many Billion did you make last year ? I am Locked into a new 2 yr contract . Why don’t you just release me ? After 20 yrs do you think I will ever renew my contract ?
Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck -
all of my apps are in iTunes AND on my iPod Touch. in iTunes, under my iPod, the checkbox next to 'sync apps' (in the Apps page under my iPod) is Unchecked. if I check it, all my apps will be all over the place and I will waste hours trying to get it back to the way it was. I don't really have a reason to check the box but I don't know. should I check the box and have to reorganize all my apps or leave it "un-synced"?
by "un-synced" I mean how it is on my iPod and iTunes at the same time but its not synced
this happened b/c I had to make a new user acct on my only [Windows 7] computer and when i clicked transfer purchases, this happened.
any help would be greatly appreciated
And as you can see ( besides my problem here) i am out of dropbox space. it would be nice if you can click http://db.tt/TQiPs59V to make an acct to give me and you more spaceYou should ALWAYS make sure that everything is on your computer and backed up, most especially before any update. The iphone is designed to be synced to your computer regularly.
If you have failed to do this, then you need to redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
By clicking on a button all the check boxes i have should be checked
Hi all,
Im having a button 'SELECT ALL', by clicking on that all the check boxes i have in my view should be checked.
Help me out with procedure and the sample code.
Thanks & Regards,
SureshHi Sureshkumar,
1. Create a value attribute named <b>select</b> of type boolean.
2. Bind the <b>checked property</b> of all the checkboxes to this attribute.
3. Create an action called <b>click</b> and bind it to <b>OnAction</b> event of the button(whose click will check all the checkboxes) and write this code in that action.
<b>wdContext.currentContextElement().setSelect(true);</b>
Warm Regards,
Murtuza -
How to set password for a zip file and should be checked when reading that
Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.JHeyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply. -
The MRP parameters are not maintained in plant JK01
Good morning,
t-code : md04 (stock req.list) but got an error.
MRP parameters for plant 'JK01' have not been maintained
Message no. 61273
Diagnosis
The MRP parameters are not maintained in plant JK01.
Procedure
Maintain MRP parameters in Customizing.
how to maintained mrp parameter fro plant JK01 ?
Thank you.Hi Robert,
First maintain the plant parameter using tcode OMI8 for the plant JK01.
this will solve ur issue.
hope it wud have answered ur question
reward if useful
shawn -
MD04 Problem(MRP Parameters for plant not maintained)
Sir in tcode MD04 i am getting error message no. 61273 (MRP Parameters for plant not maintained).What to do?
i am online.Hi
Maintain plant parameters in T code : OPPQ
or copy plant properly
Tarachand -
How to check servlet parameters?
I need to check the parameters passed to my servlet for occurence of invalid symbols - html tags for example
Use this:
String parameter = request.getParameter("YourParameterName");
parameter = parameter.replaceAll("<","<");
parameter = parameter.replaceAll(">",">");Happy coding! :-) -
How do i reset safari and what items should I check or delete?
How do I reset safari and what items should I check or delete
Reset Safari. OS X 10.8 Mountain Lion/ Safari 6
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Check the box beside each item you want to reset.
No need to check the box beside "Remove saved names and passwords".
Click "Reset".
For more info: http://support.apple.com/kb/PH11914
Best. -
What value should be for below parameters
Dear all,
Please suggest what value should be for below parameters in Win 2003 ,ecc6 and oracle 10g and 16 gb ram.
Parameters Description Current value
fixcontrol Bug fix control parameter
For information about the recommended settings for parameter FIXCONTROL, version of Oracle release 10.2.0.4 a number of values must be set.
Parameters Description Current value
max_dump_file_size Maximum size of the optimizer trace file UNLIMITED
optimizer_index_caching Adjust the usage of nested loops 0
optimizer_index_cost_adj Percentage of the calculated index costs 100
parallel_max_servers Parallel Query: Maximum number of parallel execution servers 150
PARALLEL_MAX_SERVERS.
Parameters Description Current value
parallel_threads_per_cpu Number of parallel execution processes/threads per CPU 2
shared_pool_reserved_size Part of Shared Pool for large statements 128676003
pushjoin_union_view Enable pushing join predicate inside a union all view
Regards,
KumarHello Kumar,
The following should be the recommended parameters for your case. Always take a backup of initSID.ora and spfileSID.ora file before making the changes.
fixcontrol Bug fix control parameter
*._fix_control='5705630:ON','5765456:3','6221403:ON','6329318:ON','6399597:ON','6430500:ON','6440977:ON','6626018:ON','6670551:ON','6972291:ON','7325597:ON','7692248:ON','7891471:ON'
max_dump_file_size = 20000
optimizer_index_caching Adjust the usage of nested loops 0
optimizer_index_caching (do not set)
optimizer_index_cost_adj Percentage of the calculated index costs 100
optimizer_index_cost_adj = 20
parallel_max_servers=20
parallel_threads_per_cpu = 1
shared_pool_reserved_size
CPUs Shared_Pool_Size
4 500M
6 1G
10 1G
32 2G
64 2G
128 3G
Resize db_cache depending on your needs. For your case, I would recommend at least 2GB of RAM for db_cache
pushjoin_union_view
pushjoin_union_view = false
Set this as true if 6917874 fix is implemented.
In addition Oracle processes should be calculated as follows
Oracle Processes =
{ ABAP WP X 2 +
J2ee Server Processes*MaxConnection + Parallel_Max_Servers + 40 }
Hope I am clear.
Thanks,
Venkatesh Pydi.
Maybe you are looking for
-
Why does it say server error when trying to sign into icloud on my microsoft
I downloaded i cloud for my windows computer and when i try signing into it it says server error. what does this mean. i am trying to set up icloud so i can save photos Please help
-
I am trying to set up an apple id and itunes acct. for my daughters Iphone5 but she is underage and it wouldnt let me. I went ahead and retried setting it up under my name and it still says "you do not meet the minimum age requirement". what do i do
-
ISight stopped working on my macbook pro
Over the past couple of days my iSight has been randomly stopped working. I will be on iChat and all of the video icons will turn into phone icons as if I do not have a webcam. I check iChat and it says "There is no camera attached to this computer."
-
I'm trying to add a pdf to my ADE library - it says I don't have permission to do so
I'm trying to add a pdf book to my ADE library - it says I don't have permission to do so. I previously purchased the book, but have had to rebuild my computer after a failure. How do I recover this, and other epub books?
-
IFooty update, unknown error. How do i delete it?
A few days ago i put iFooty on my iPhone 3g, and it worked great. Today i see that there is an update for it, so i try to update it from my phone. It tells me that it will update next time i sync it. When i sync my phone i get an error saying (someth