Manual routing selection in REM.

Dear Gurus,
Is there any configuration settings for manual routing selection in REM ??
Regards,
Pradeep

Dear Pradeep,
Why do you want to select the Rotuing manually?
Once if your Product has got 2 different routing ,it might be
because of Shop Floor constraint or for costing purpose,after
creating a new routing,you have to create a Production version
for a combination of Rate routing And BOM.
After that you have to create a Product Cost collector using the
new Production version and create a preleminary product cost
estimate for the product cost collector and save.
If You want to decide at that time of production
confirmation,which routing has to be used,then before this step
you have to change the REM profile for that particular product (
whose activities are posted using the Preleminary cost of the
Product Cost collector).
Check with this,your problem will be solved.
If still exists,revert back to forums.
Regards
Mangalraj.S

Similar Messages

Creation of search help manually fro select-options

hi friends i got a requirement for creating the search helps manually for select-options.
but i am facing a progbalem.
i am attaching a sample code for what i have written for select-opions low of which when i am pressing f4 button i am getting list of data but when i am selecting that particular it is not withstading on the screen...kindly help in this regard very urguent..plz...all answers are rewarded..
tableS: kna1.
datA: BEGIN OF ITAB OCCURS 1,
    KUNNR TYPE KNA1-KUNNR,
    END OF ITAB.
data: kunnr type kunnr.
select-options: cust for kunnr .
at selection-screen on value-request for cust-low.
select kunnr from kna1 into table itab .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
*   DDIC_STRUCTURE      = ''
    RETFIELD               = 'CUST-LOW'
*   PVALKEY                = ' '
*   DYNPPROG               = ' '
*   DYNPNR                 = ' '
*   DYNPROFIELD            = ''
*   STEPL                  = 0
*   WINDOW_TITLE           =
   VALUE                  = 'CUST-LOW'
   VALUE_ORG              = 'S'
*   MULTIPLE_CHOICE        = ' '
*   DISPLAY                = 'X'
   CALLBACK_PROGRAM       = SY-CPROG
*   CALLBACK_FORM          = ' '
*   MARK_TAB               =
* IMPORTING
*   USER_RESET             =
TABLES
    VALUE_TAB              = ITAB
*   FIELD_TAB              =
*   RETURN_TAB             =
*   DYNPFLD_MAPPING        =
* EXCEPTIONS
*   PARAMETER_ERROR        = 1
*   NO_VALUES_FOUND        = 2
*   OTHERS                 = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hai Saslove,
I think Problem Lies In this Area When U r Creating   Search Helps.
Import and Export Parameters
When an input help is called, the entries that the user already made in the input template are taken into consideration. For example, if a user calls the input help for the flight number and already specified the carrier, of course only the numbers of flights of this carrier should be offered.
On the other hand, if the user selects one row of the hit list, more than one field of the input template might have to be filled with data from the selected row of the hit list. For example, if the flight number is obtained from the hit list, the city of departure and the destination should also be returned in the screen template.
The interface of a search help defines the context data that can be used in the input help and the data that can be returned in the input template.
A parameter of a search help can be classified as:
Import parameters: Parameters with which context information from the processed input template (screen) may be copied to the help process.
Export parameters: Parameters with which values from the hit list may be returned to the input template.
A parameter can simultaneously be an input and an export parameter. A search help can also contain parameters that are neither import nor export parameters. Such parameters could be required for the internal input help process, for example.
When you attach a search help, you must define where the import parameters of the search help get their values from and the fields in which the contents of the export parameters are returned. See also Value Transport for Input Helps.
Regards.
Eshwar.

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5. I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files. Is there a known procedure to do this? Any tips or feedback?

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5.
I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files.
Is there a known procedure to do this? Any tips or feedback?

1. Make a backup, open App Store and purchase Mountain Lion. When its download finishes, close the installer and open Lion Diskmaker to create a bootable USB drive with Mountain Lion.
2. Press Option key while your Mac is starting, select the external drive and open Disk Utility.
3. Select Macintosh HD in the sidebar and erase the drive.
4. Close the window and install Mountain Lion

IPhone 5S manual network selection

Hi all,
I have an unlocked iphone 5S and seem to have an issue with the manual selection mode. I was travelling outside my resident country and switched to manual network selection mode to choose my preferred roaming network in the foreign country. After spending 10 minutes scanning, the phone didn't come back with any results although there was clearly network coverage of my preferred roaming network where I was standing. I had to restart the phone and then surprisingly ios 7.1 changed the network selection mode from manual to automatically. After changing it back to manual, I was finally able to get my preferred network. However, there was another issue with this - after successfully registering onto the preferred roaming network and having made calls on this network, the phone for some odd reason switched to another network which I hadn't chosen. This happened despite the network selection kept on manual. Eventually, my roaming bills went through the roof due to this.
Can someone pls help out with this issue?

Just to clarify the original query.
1. I manually select, say, three Sweden when I'm in Sweden.
2. Just so we're clear, I have tried switching off and then re-booting the phone in manual mode.
3. I do whatever mail sending etc is necessary only to find the phone has flipped over to, for example, 3G Sweden, which is not part of the Three Group.
4. It seems to me that in the midst of preparing a message etc, the network goes down and the phone then picks up the next strongest network signal in the vicinity, even though the network selection is set to one network only. And therein lies the problem - the flicking over and back costs money.
Three.ie blame Apple, but why do I have a sense that it may not be all Apple's fault, that there may be a network switching issue mixed up in it as well?

Routing selection in Production Order when using ECN in Routing

Hi experts,
I'm having some trouble with routing selection when using ECN in routing creation.
I tested a case where I have 3 routings without ECN, and the Order asked me which one of the 3 I want to use.
Then I created a routing with ECN. The order asked only one routing without ECN and the new routing with ECN.
Do you know if there is any relation about using the ECN in Routings and using at the same time Routings without ECN, when selecting the routing in production order?
Anybody can help?
Thank you,
Caio.

Hi Ayoub,
All the 4 routings are valid from Oct.2014 to 31.12.9999.
The Order date is from Apr.2015.
I've made another test with 2 routings created with ECN and the order chose one without asking me what to choose. I don't know the criteria used in this functionallity.
Thanks,
Caio.

Help setting validation based on route selected

If the LC form only has one submit button, how do you set a validation on submit based on the route selected when running forms in workspace?
For example, if users have the option to Approve or Reject a form, can you determine which route they have selected and validate fields accordingly? So that if "reject" is selected we can validate that the reject comment field was completed, and if "approve" is selected we can validate that the form was signed? Is there some property of the submit button or process field that makes this distiction?
Thanks for your help!

You can use a JavaScript if-else statement on the preSubmit event of the button. Do a check to see which of the fields are populated, then perform the required action.
You could even hide the buttons, then if the user fills in a comment in the reject field, you simply show the reject button and keep the approve button hidden. You could have a pop-up when the form opens informing the user of the document's steps / process.

X3-02 "roaming" manual network selection reverts

Hi,
As the header states, I wish to lock my phone to the "roaming" network. The phone successfully connects to roaming for a few minutes, then frustratingly reverts to it's Home network automatically.
It can be seen that the menu option also reverts back to "Automatic" network selection.
The conditions are as follows:
3G 'Three' 900Mhz - very poor reception that drops out
3G 'Roaming' 850Mhz - perfect reception
Please advise how to make the manual selection stick.

Similar faults reported:
/t5/Eseries-and-Communicators/Nokia-E71-Manual-Network-selection-Problems/m-p/334750

Blackberry curve 9300 manual network selection

when i set my curve 9300 to manual network selection, and i select my networ, if i go in a palce underground or something and i lose the signal, the phone doesn' t pick up the signal automatically when i am back in a coverage area. instead, i find an alert window that says "can't find home network and asks me to chose whether i waast to: set it to automatic, go into settings, or cancel" and i have to either go in settings and select it again or jsut set it to automatic and it will find it. in other smart phones it usually gives that alert, but as soon as i am back in a coverage area, it picks up the home network on its own without having to go to settings. so is this the normal behavior?
Solved!
Go to Solution.

mira_ishak wrote:
when i set my curve 9300 to manual network selection, and i select my networ, if i go in a palce underground or something and i lose the signal, the phone doesn' t pick up the signal automatically when i am back in a coverage area.
Correct, because you have set the device MANUAL network selection.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Different carrier, despite manual network selection

Why does the manual network selection not fix the chosen network carrier.
I use the option manual network selection, select my preferred network carrier, but once I loose the connection to the chosen carrier (train ride), my iPhone 3GS starts a new search and switches to a different available carrier, despite manual network selection activated. As far as I was concerned, manual network selection should prevent the iphone 3GS to search for a different carrier, except the one chosen.
When I go back into the network selction menu, manual network selection is still activated and a checkmark is set on the preferred chosen network. Despite these facts, the iPhone 3GS is logged in to another carrier's network, indicated in the top left corner.
This is a big problem, when I'm using my iPhone in another country. Roaming Costs are high!
A quick search in the www indicateds, that I'm not the only one with this problem. As it can cause high additional costs, this problem should be fixed as soon as possible.

honestly i don't think its a apple iphone direct issue. here's what i know...i have had a no service on my 3gs randomly coming up on my phone for nearly a year now. i have done everything you've stated and still the same. i recently just went to australia and used a telstra sim card and it worked flawlessly for 2 months. i believe that bell and telus have changed their signal or something that is causing this but they will deny it to the bitter end. so...why not just buy another iphone? Exactly! thats what they want you to do! It's just a ploy to get you to buy another phone. if you can get another carrier besides these 2 crooks i think you will find it works. try buying a cheap prepaid sim card to see which carrier works best in your area before selecting a plan.

Nokia E71 Manual Network selection Problems

HI
I have the E71 on the Three network and it allows roaming in this country (something thats usually locked off) to avoid roaming charges I went to change the phones network select option from Automatic to manual, I get the usual pop up to select the network I want to connect to but when I go back to the network options screen it shows as automatic and does indeed allow roaming. How do I actually change to manual network selection.
Cheers

I can't believe that Nokia have not resolved this problem.
The problem gives a direct influence on the cost of calls, which is very excessive.
I spent 3 hours on the phone to Three to try to resolve the problem and nothing worked. Tried removing sim card and putting it back in, factory reset and hard reset.
For a regular traveler this phone is a nightmare. Call charges can range from £0.25p to £1.50 and 0.12p to 0.25p. Also call charges may be applicable in the UK depending on your network provider.
Quite simply not fit for its purpose. A mobile phone by definition is "a hand-held mobile radiotelephone for use in an area divided into small sections, each with its own short-range transmitter/receiver provided by a specific network carrier".
Unfortunately the phone does not meet this definition. Under the Trade Descriptions Act of 1968 should be entitled to a refund as customers have been mislead by the sale of the handset. Also the phone directly misleads roaming customers.
Also under the Sale of Goods Act of 1979 the mobile phone should be "fit for purpose". Unfortunately the E71 is not fit for purpose as a mobile phone does not meet its definition and as a customer the network provider does not provide a fair service carried by the network. Most networks are contractually bound to do so.
If you have a problem with this phone please contact Nokia or your provider to try to resolve the problem and push the new firmware as soon as possible!

N9 manual network selection?

Does sw (or an update) supports "manual network selection" option?
Solved!
Go to Solution.

Yes, it's in the mobile network settings.

Manual network selection for iPhone 5

i need manual network selection for iPhone 5 why do not?

You bought the wrong phone.
Yes, it will work. Up to a point. LTE will not work as they use different LTE bands. Contact AT&T to make sure 3G data is provisioned properly on your account. And consider returning the phone and purchasing one intended for AT&T (or an unlocked phone) instead.

Manual operator selection BUG!!!

I have an N73 phone. When i am abroad roaming and i use the manual operator selection the phone reverts to automatic operator selection within a minute and overrides my previous manual selection. I find this bug very irritating and i think nokia should post a solution ASAP. Anybody any ideas?
Nik

I did few test with different SIM card from different operator and at least for me seems that only TRE (Italy) and THREE (uk and ireland) are blocking the manual operator selection.
When instead i used TIM (Italy) , or VODAFONE (italy or ireland) the operator selection was stick to MANUAL.
I have a N95 unbranded latest firmware. but the same BUG is with my N73ME.
Using a Samsung i600 with Microsoft WM6 the operator selection di work with all my SIM card .
Does anybody have any idea why the Symbian s60v3 have this bug?

5230 manual operator selection problem

Hi,
I recently detected that the manual operator selection does not behave as intended with my 5230 (Software release 20.0.005). I wanted to manually select "tre" in italy because I'm "drei"-customer in austria and 3 has this nice 3LikeHome feature where you have no roaming costs when you use a 3 network in a foreign country. So I switched the operator selection to be manual and after the nework search I selected 3 as provider. But as soon as I was out of the reception range of the selected network the phone automatically selected another network although the user manual says that if the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. Can anyone confirm this behaviour?
Thanks,
Gerhard

Sim card are activated only for one particular operator provider, selecting the other only means that the sim is not for the other one. In locations where there are plenty of providers you'll find as many as there are & being in manual you have to be certain which one. In automatic mode, it queries one after the other in round robin fashion until it gets an access. I've noticed that too, that different models of Nokia phone have diferent strenght of radio signals transmit/recieve. It's not surprising to to see one model have more bars (signal strenght) than others.
Message Edited by android on 29-Aug-2009 02:14 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Vodadfone India 3G is not working on my iphone 5S. Tried manual network selection as suggest by others. still it is not working. any help is greatly appreciated

Vodadfone India 3G is not working on my iphone 5S. Tried manual network selection as suggest by others. still it is not working. Any help is greatly appreciated

Hello Tony Lobo
Try out the article below for issues with connecting to cellular on your iPhone.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS2755
Resolution
Follow these steps for help troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Make sure that your software is up to date:
Check for a Carrier Settings Update: Tap Settings > General > About.
Check for an iOS Software Update: Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
Regards,
-Norm G.

Manual routing selection in REM.

Similar Messages

Maybe you are looking for