Manual slideshow navigation problems

I have a project with three slide shows of PSD images. The slide shows all have the same settings in that they are set for manual navigation and I have the navigation buttons shown.
In preview everything works but once burnt as a DVD none of these work and the problem is not entirely consistent.
Slide show one
When selected from the main menu the first slide is shown. Pressing the arrows does nothing nor does pressing enter. Slides can only be navigated by pressing the skip chapter buttons.
Slide show two and three
Arrow buttons do nothing but the enter button skips forward to the next slide. Despite the forward and reverse navigation buttons showing you can only go forwards.

I've hd the same problem since upgrading from 3 to 5. Sometimes only the first slide will show while the next show is okay... I also found trying to navigate backwards won't work with iDVD5. I had to use iPhoto to do what I needed & export the slides as a movie. A real pain, but it did work. I hope they fix this. Of all things, a slide show should be a piece of cake. But try the iPhoto route in you're in a bind.

Similar Messages

Manual Slideshow navigation question

Hello illustrious experts! I couldn't find this addressed so her goes..
When add a slideshow, and set it to manual advance, & then when it's burned and played on a DVD player the navigation works fine. But if you play it on a computer you would automatically think that the advance-to-next-slide arrow buttons would activate via the mouse but they don't.
You have to use the DVD player software navigation buttons. My client is ******** that his clients keep complaining that the DVD doesn't work, because most people assume that, like the chapter or movie select navigation the mouse will work on these arrows..
Any ideas anyone? Am I doing something wrong? Is this a bug?
Pete

This probably too late to help, but for the record:
In the manual advance slideshow the arrow buttons are only images showing which direction you can go. Actual navigation for both TV and computer is by the controller left-right arrows.
I'm in the process of making an instructional slideshow, and I will put a note on the lead iDVD slide saying that navigation can only be done with the player controller buttons. Screen arrows are indicators of your direction options.

Manual slideshow problems

One thing I often need to do is show a bunch of my photos as a slideshow. I like to do that in manual mode, so i can choose when to go forward or back. On my new dual-core 2GHz G5, the manual slideshow feature works terribly. When I hit the forward arrow, there can be a long delay, and then a small version (bigger than a thumbnail) appears, and after another 5-10 seconds it finally expands to full size. If I go back to the previous image, it goes through that 10-20 second delay again, even though the image was just displayed a moment before. Automated slideshows work better. There's still a pretty long delay between photos (even if I set the time very short), but at least it doesn't change until the full-screen version is ready to display.
There is a setting to "use proxy images" for faster speed, but the resulting images can be pretty terrible. They looked like the original images without any of my post-processing (no sharpening, etc.)
Normally I'd just open the files in a different program, such as iView Media, and have a slideshow that moved quickly between images, without ever displaying shrunken versions. But if I use Aperture as my primary tool, this will be problematic because I won't have easy access to the images. Would I have to output all the images as jpegs just to show a slideshow? That seems like a big drawback and waste of disk space. Has anyone encountered the same problem or have suggestions for showing slideshows when using Aperture as the primary photo organizer?
Paul

I've hd the same problem since upgrading from 3 to 5. Sometimes only the first slide will show while the next show is okay... I also found trying to navigate backwards won't work with iDVD5. I had to use iPhoto to do what I needed & export the slides as a movie. A real pain, but it did work. I hope they fix this. Of all things, a slide show should be a piece of cake. But try the iPhoto route in you're in a bind.

Slideshow navigation buttons not working.

Having had the slideshow navigation buttons that exist below my photos (back, pause, forward) working fine for some reason they are now coming up as question marks in Safari and error boxes in Firefox and Explorer. I have not made any changes to my site but have republished since discovering the problem but it still remains.
I have looked for the cause in iWeb but have no idea what will remedy this.
Any help much appreciated.

Caused by the recent update from .Mac to MobileMe and out of our hands for fixes.
The trouble is caused by some of the links create by iWeb that point to files found on Apple servers (not your iDisk). They are usually created inside the javascript files (.js) and use incorrect URL's that previously worked when linked at .Mac but now fail at MobileMe.
Since it is a javascript file a Web browser status bar (bottom of the window) shows a javascript:void URL but a click on the link in our iWeb (and Homepage) pages is not finding the correct Apple server files (they are not part of your iDisk and are hosted on Apple servers).
Odd thing is that some of these URL's do work and others fail. Some do not show the mouse over change (to the pointed finger icon) but clicking in the space where they should appear triggers the javascript.
Someone at Apple will be working late into the night to "fix" what they broke.

RoadMap UI Navigation Problem

I'm facing a navigation problem using the roadmap UI in WD4A.
Let's say we have 5 views. The roadmap view is the default view, the other views will be embedded into a view container UI element on the roadmap view. The roadmap UI has 4 steps, one for each view.
V_ROADMAP
V_STEP_1
V_STEP_2
V_STEP_3
V_STEP_4
Now, I need to add navigation buttons (previous & next) to navigate between the roadmap steps.
My question is where should I placed these navigation buttons? On each view or only on the roadmap view.
Personnaly and it think it would make more sense to place them only on the roadmap view.
My problem using this approach is has follow: When you are on v_roadmap on step 1 (V_STEP_1), you click on Next to go to the next view (V_STEP_2), actually the action is trigger in V_ROADMAP so I am not able to validate user input field or obligatory field in V_STEP_1. I would have to call an action from V_STEP_1 in V_ROADMAP so the event handler method WDDOBEFOREACTION will be called. I don't think it's possible. The problem here, is you can click on next and you can go to the next view without filling the obligatory fields.
If I placed my navigation buttons on each view. The advantage is that before triggering an action, I can validate user input field, obligatory field in the method WDDOBEFOREACTION before going to the next step.
The desadvantage is that I have to recreate them on each of my view.
thanks
Alex

Just to close this thread, I will summarize the different possible options:
Navigation buttons on each view: This is the easiest way to validate obligatory fields but for component reuse it's not good idea to have navigation buttons on individual views.
Navigation buttons on main views: If we placed the navigation buttons on our main view, the validation is kind of painful, before firing an outbound plug from the main view and a corresponding inbound plug on the individual view, we will have to manually verify our obligatory fields from the context of the componenent controller or using cross-component data sharing.
Navigation using GAF (Guided Activity Floorplan): I think this option is the way to go! The problem here is that's very difficult to find documentation on that subject, also, the tools from SP 15 is not as user friendly then the one that's coming in NW EhP1.
Alex

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

Still having navigation problems and need help with how to debug

Hi,
I've been porting over a servlet project to JSF and I'm still having navigation problems. I thought the problem might have been because the original project used HTML frames and so the "from-view-id" JSP defined the frame/framesets and the specific JSP that does the submit (and so is named in the "from-view-id" is never defined in a "to-view-id" attribute). I've now switched to using an IFRAME, and that resolves that problem. So now the JSP is defined in a "to-view-id" attribute and it includes an named IFRAME that can be used as a target. I press the submit button and I get not the JSP expected butinstead the same JSP displayed inside its own IFRAME.
Here is the code for the submit. I've simplified it as much as possible with a static action (originally it was a call to a method) just to try and get things to work. This is the current version:
<h:commandButton value="View Alias" action="foo" styleClass="select" type="submit" />Here is the navigation rule in faces-config.xml. Again, the problem is that SelectManager get redisplayed in the IFRAME instead of display.jsp.
<navigation-rule>
   <from-view-id>/SelectManager.jsp</from-view-id>
   <navigation-case>
      <from-outcome>foo</from-outcome>
      <to-view-id>/display.jsp</to-view-id>
   </navigation-case>
</navigation-rule>I have also tried it without the "from-outcome-value" which I presume means that the "to-view-id" gets displayed unconditionally and it still fails. Any ideas on how I can debug this? (I'm using GlassFish if that's important to know)
Rob Tanner
Linfield College

Raymond, The real trick is avoid doing technical things when coming down with the flu (I should also add that I'm a JSF newbie). Reading your original message this time I see what you're suggesting and found a conversion error although I don't understand it. Here's the code (including the <h:message/>):
            <h:selectOneMenu value="#{members.dcodes}"
              style="color: #7f0000" id="selector">
              <f:selectItems value="#{members.departmentList}" />
            </h:selectOneMenu>
            <h:message for="selector" style="color:white"/>And here's a snippet of the generated HTML:
<select id="j_id_id26:selector" name="j_id_id26:selector" size="1" style="color: #7f0000">
         <option value="aad" selected="selected">Academic Advising</option>
     <option value="aaf">Academic Affairs</option>
     <option value="adm">Admission</option>
     <option value="up">Upward Bound</option>
</select>If I select "Admission" for example, the error I get is:
Conversion Error setting value 'adm' for 'null Converter'.Since everything is a String value, I don't get the error. Could someone please enlighten me.
Thanks.

Navigation Problem in OBIEE

Hi,
I have a strange navigation problem. I have the navigation setup from the 1st page of my dashboard to go to the second. When I first bring up the first page, and then click , nothing happens. Now if I refresh this page and then click again, I am able to navigate to the second page. I would to hear if anyone has seen similar issue. Any help is appreciated.
Thanks,
Bharat

Still haven't found a solution to this problem.
Even if I remove the form1.setTarget( null or other framename/windowname)
I tried changing to using the onclick="from1.target='mywin';" and also onclick="form1.target='_self'; on the button. Does not work/ have the desired effect of controlling where the page is opened: in same window or in another frame or window.
For some reason navigation also totally breaks, after a search, with a similar sql as in this message, and I get no error when I debug and step through the code.
After doing one search, navigation seems to stop working and only the search.jsp page is the target.
If I do a view first navigation works to new page/servlet output but still not in a new window/frame.
This simple stuff in a normal simle html page, should not be so hard to accive with SJSC perhaps someone of you in the community or the developers at sun can give us insight into this simple problem.
It must be fairly common that one likes to control where a page is opened, in the existing window/page/frame or in a new window/frame.
Anybody else had any problems with navigation not working with similar code ??
If I remove the do_search() call it works, the navigation continues to function, but still have no control of the destination window/frame.
Kind Regards
Roger

How to create Manual Slideshow Button

Hi, I'm trying to have a manual slideshow
controlled by a single simple arrow button
to either advance or go back
I've already converted my slideshow to track
and on the first track/chapter marker I've selected
Button Highlight Marker
How do I now create a button that lets the user
browse all 60 slides manually?
thanks

Sorry this reply isn't about creating mannual slideshow button, but it might help solving what you want. You said you want to "lets the user
browse all 60 slides manually".
What I did with my slideshow:
1. Drag all the photos in the slideshow
2. Check all the boxes "PAUSE" (this way the photo will stay still until the user press "next" of "previous" button in the the remote/ dvd player controller button)
3. Duplicate the last photo (by dragging from the DVDSP browser)and put it after it's clone.
4. DON'T check the box "Pause" for this duplicate
5. Set the duration for this duplicate to 15 frames (00:00:00:15)
Set the slideshow to "jump to xxx menu" when finish.
Now, what happen is, when the slideshow starts, the user will see the first slide freeze, and they will manually go back or forth from the player control (not the button on the dvd menu). When it come to the last slideshow, and they hit "next" it will transist to it's clone (that you duplicated), this clone is set to automatically transist after 15 frames and jump to XXX.
To make the users more aware of the "possibility of going back and forth", or simply to tell the user what the next/ previous slide is, you can create dummy "button" (I just do it with arrow symbol or text "Next" and "Previous") in the appropriate position on the slide. This "button" is only to tell the user there is a next and previous, it doesn't interact. But what it does is making the user press "next" and "back" in the controller.
I hope this help.
Message was edited by: Ly Phan

Mouse navigations problem with Sun Java 1.5.0_*

Hello gurus,
We need to move from JInitiator to Sun Java Plugin; according to the Forms10g Client Platform Support (http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html) one of the certified version for Forms 10.1.2.0.2 of the the Sun Java Plugin is 1.5.0_06 and Internet Explorer 6.0, we have tested also SJPI 1.5.0_09 and we get the same mouse navigation problem reported in the following Oracle Forum threads.
Mouse navigation don't work with Java Plugin.
Mouse navigation don't work with Java Plugin.
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Does anybody know a solution to this problem?
Any help will be really appreciated.
Regards,
Victor.

You need to use 1.5.0_12 or newer. The client SOD is not up-to-date on this specific point. A lot of navigation problems was fixed in this very release.
The Management team should change this in the client SOD, wonder why they still refer to 1.5.0_06. For Applications, the first 1.5.0 to be certified was _12.
Also make sure, that you are using the latest Patch 3 for 10.1.2 (10.1.2.3). This patch also contains fixes for a lot of these wellknown issues.
Hope this helps,
Jacob

Navigation Problem in Next/Previous Record

Hi,
I have a Master (have 20 fields) and Four its Detail block visible on same screen but each block have its own Canvas and Window. Now master table have 1700 records with its detail tables. So after Query when I press the Next_Record button it will no response some time I have to press it twice or thrice then it will respond and some time on fist click it gives the response.
So I want to navigate through Next Records or Previous Record buttons on single click.??????????
Kindly send me the solution of this problem on urgently basis.
Best Regard,

Hi,
It's very difficult to suggest something by readingyour post. There are many reasones for navigation problem. Validation is one of them. Be sure that validation triggers written on any level are working properly. What code you have written on the buttons that you are using for navigation. In which blocks you have put your buttons. It is recommended that you put all your non-database items in a non-database block. Check this also.......

Installing ios8.2 does not resolve Google map navigation problem or gps tracking!

Installing ios 8.2 does not resolve Google map navigation problem.

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

Slideshow w/ timer, navigation problem (once clicked timing off)

I have a AS3 flash slide show that uses the timer method with a wait() function to change slides. So the preloader is on frame one and the first slide is on frame two and the second slide is on frame three and so on. At each slide frame there is a wait(7) statement so that the swf moves ahead to the next frame every seven sec. When I create a nav element that uses the gotoAndPlay function to target each frame, everytime the nav is clicked and goes to the corresponding slide the timing of the slides is all messed up.
Can anyone help me by suggesting a solution to this? I may be nieve but it seems that once the button in the nav is clicked the timer keeps going on the slide the user was on when the nav was clicked. How can I clear the wait() timer on click? When I just add a remove.EventListener to the button the function in the frame is not available to the button though they are both in the same frame.
Below is the wait() I am using in the root stage timeline:
function wait(duration:Number) {
    stop();
    var timer:Timer=new Timer(duration*1000,1);
    timer.addEventListener(TimerEvent.TIMER_COMPLETE, onWaitTimerComplete);
    timer.start();
function onWaitTimerComplete(e:TimerEvent):void {
    e.target.removeEventListener(TimerEvent.TIMER_COMPLETE, onWaitTimerComplete);
    stage.removeEventListener(Event.RESIZE, onStageResize);
    play();
Below is the code for the click inside the movieClip button:
b1.addEventListener (MouseEvent.CLICK, onClick);
function onClick( event:MouseEvent):void
MovieClip(root).gotoAndPlay(2);
THIS PROJECT IS LOCAL SO NO LINK AVAILABLE

Look further int the Timerclass to see what other methods you can make use of. It has a reset() and a stop() method that could get you what you want. One thing you will probably need to do though is to decalre the Timer outside of the function so that it has scope outside of the function so thaat you can have other functions' code control it.

Accordion with Vertical Navigation problem

Following tutorial about phone layout accordion/vertical navigation menu encountering following problem in my original file:
Create accordion - ok (style to my pref)
Insert vertical navigation - ok (style to my pref)
When trying to resize the v/nav to hit the red line on browser edge - both left and right, in preview and in mobile simulator the navigation panels don't expand accordingly to the width of the mobile screen.
If try with only accordion with no menu all ok. As soon as I add the navigation and try to size to hit the red guides indicating that it will resize with browser size, when preview it doesn't as described above.
Any suggestions?
Thanks
Sam

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

Slideshow navigation buttons

I've created Photoshop buttons with three layers, 1 is normal 2, is mouseover and 3 in mousedown.
I've inserted a blank slideshow and imported both buttons which sit side by side.
I've copied each button then replaced the navigation < and > text in the default slideshow. This works when I preview the page in the browser. When I publish the site to BC the right-hand buton doesn't perform properly and the mousedown and mouseover states swap. Also the navigation buttons don't align with the top of the slideshow after publishing as they do when previewed.
I previously had a lot of problems trying to achieve this when pasting the Photoshop button into place the program terminated (crashed) with an error message, something to do with 'an object with null'. I deleted the page and started again, now I can't get the program to crash to get the exact message.
The page where the problem occurs is:
http://rtc-training.businesscatalyst.com/security-manager.html

Thought I'd try removing one of the states (layers) in the Photoshop file then Published to BC. Didn't like the result so decided to retrieve the buttons with 3 layers from my backup disc. Replaced the files on my Mac, opened Muse and automatically updated the linked items. Published again and now everything is working as it should. Puzzled but happy.

Manual slideshow navigation problems

Similar Messages

Maybe you are looking for