Manual steps in note 901068

Hi,
We have SRM 4.0 ( Srm server 500, SP08). There is an issue of endless loop during workflow WS 14000109.
SAP advised to apply note 948733.
The pre requisite notes 893106, 894978, 896556, 898768 were applied, but in pre requisite note 901068 there is a manual step(given below) which i cannot understand how to carry out. Can someone please advice:
In the workflow template of WS14500015, use Transaction SWDD to adjust the dataflow in step 113 for the TS14508047 task in such a way that the following definition occurs:
                     Workflow => step
=>
BUS2121 =>
=>
                     Workflow <= step
<=
<=
                     Then regenerate the workflow.
Regards
Srivatsan

Hi,
Thanks for the reply. I understand that i have to change the binding for this step. But what exactly i shud change is not clear from the solution text (given below).
Workflow => step
=>
BUS2121 =>
=>
Workflow <= step
<=
<=
Regards
Srivatsan

Similar Messages

Manual Standby Database not in sync with missing archivelogs

Hello,
OS: Solaris
DB: Oracle 11.2.0.1 EE
Not Using ASM or RAC
I have a Production database that is in archivelog mode and a Standby DR server.
Both servers (Prod, Standby) have exact same structure and db name/version.
We manually scp archive logs and recover them to a manual standby database via SQL Scripts "cron". (I.E. set autorecovery on; recover standby database;)
We recently got out of sync with our log files and have not been applying them to the standby. As part of Prod Maintenance, these log files were deleted and are not available anymore.
I've tried several ways to "rebuild" our standby database. I have tried to Shutdown prod, backup all the db files and scp them to standby, re-create standby controlfile and startup mount and recover standby.
Every time I try to apply a new archive log via recover standby, these are the errors:
ORA-00279: change 211077622 generated at 1/27/2012 12:18:42 needed for thread 1
ORA-00289: suggestion : /oradump/arch/PROD/PROD_arch_1_69486_736618850.arc
ORA-00280: change 211077622 for thread 1 is in sequence #69486
ORA-00308: cannot open archived log '/oradump/arch/PROD/PROD_arch_1_69486_736618850.arc'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-10879: error signaled in parallel recovery slave
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/oradevices/PROD/oraPRODsystem1.dbf'
When I check v$log_history, the new logs have not been applied.
I've also tried the "Restore from incremental backup via SCN" method with same results.
Is there a way to re-create the standby clean and ensure that the log chain that is currently broken gets fixed or reset?
I would eventually like to get DataGuard in here, but that's not the case at the moment.
Thanks for your suggestions.
-Dav

if you are using the cold backup to create the standby database, Check that have you followed the following steps or not.
1. remove
all the datafiles and controlfiles from the standby database.
2. Create a new standby controlfile of the production for standby using the following cmd
'alter database create standby controlfile as 'Location';'
3. move the new controlfile to standby database server location as specified in initialization parameter file.
4. Restore all the datafiles to its appropriate loaction which was taken through cold backup.
5. startup nomount
6. alter database mount standby database;
7. recover standby database.
scp the archive log sequence that is asked by the database, from production.
You can try this steps.

SQL 2012 - SSIS Error -The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.

Hi guys
Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far.
The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.
Any workaround or fix ?
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

New package or one that used to work? Connecting how? How does it poll?
On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
Arthur My Blog
So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed .
I don't see any error .
I ran package manually from server using SQL Data tools and ran successfully...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

One step is not recorded during LSMW

Dears,
Please kindly help:
i make a recording in LSMW for VT03N tcode. My steps are:
VT03n
F7 (Shipments and deliveries)
Print preview of view (*)
Save to local file.
The problem i face is that Print Preview of view step (*) is not recorded in LSMW and i need to do this step manually.
Could you pls advise how to resolve this problem, if any possiblity exists.
Thanks in advance
Regards, Andrey

I was just trying to do this very thing with the same HV20 camera.
Just figured it out.
Refer to page 42 of the HV20 instruction manual.
While the firewire cable is NOT connected to the camera follow the instructions to set the PLAYBACK STD to Auto or HDV. Then set the DV OUTPUT setting to DV LOCKED. The camera will do the down conversion and it will appear to the iDVD as a DV cam.
iDVD one step will then recognize the camera and begin the capture process. I have just kicked off the process so I can't verify that the end state will be a great DVD copy, but at least I can get you started. Hope it helped.
Matt

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer.

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.

I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.

after some sorting out your article, I clicked on a question mark with the message find the missing folder. This brought me to a page where I could choose a folder by year and click on it. The question marks disappeared and the photos were available. In some cases I had to click on the year folder for each subfolder by date.
The find missing folders message did not bring me to the finder window in which I could click on folders in the hard drive itself. I appreciate your help big time!!

How can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

how can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D

Rebate-Manual payment is not allowed for this agreement type

Hi,
While processing the Rebates, after the Sales cycle till Billing document, when i i try to process the partial settlement it is givin a message as "Manual payment is not allowed for this agreement type"
could you please suggest.
Regards
AS

Hi AS
If you want to do manual payment then in VB)2 select the Agreement type and then in that agreement type check wheather Manual rebate order type has been assigned or not and Manual payment has been checked or not . If they are not maintained and Checked then maintain the rebate document type and check the box Manual accruals and then you can do Manual Payment for that agreement
Regards
Srinath

Manual payment is not allowed - Order type for payment

Hi
I 'm doing a rebate payment, but when I want to input a manual payment, I get "manual payment is not allowed for this agreement type".
I moved to 'define agreement type' hoping , filling the "Payment procedure" to "C" might resolve this issue. However this gives rise to yet another error :-
Pl. see <a href="http://i168.photobucket.com/albums/u200/masarada/untitled_1.jpg">here</a>
help only shows <a href="http://i168.photobucket.com/albums/u200/masarada/untitled_2.jpg">this</a>
my basic idea is to edit <a href="http://i168.photobucket.com/albums/u200/masarada/untisdxtled.jpg">this with a manual amount</a>
how am I to resolve this ?
Thanks

Hi,
In the screen shot u sent u did not maintain document type for manual payments, in the field partial settlement u have to specify the document type which is defined to make the manual payments, the standard order type defined for manual accruals is R3.once u made the manual payments accrual which r already posted to finance must be reversed, for that u have to check reverse accruals.I hope this will solve ur problem.
kiran vemula

Workflow step is not getting executed

Hi all,
I have designed a workflow in which I have a Decision step. after taking the a decision then it is taking so much time to execute the next step which is a background step.
The waiting time is varying from time to time some times it is getting executed in 20 min, some time it is taking 1 hr no fixed time.
I have used SAP_WAPI_DECISION_COMPLETE function module and I am passing space to the DO_COMMIT becuse of this the workitem is getting completed but it is not going to the next step. This fm is called under a button Approve of a WD application. after completeing the entire cycle of the WD application we are using the statement COMMIT WORK but still the execution is not going to the next step.
In this regard , please, can any body share their views and ideas.
And it is mandatory that only after the webdynpro application execution finishes they want to COMMIT the work.
One more thing while searching forums I found like there are terms like DB COMMIT and simple COMMIT WORK what is the difference between them .
Thanks&Regards
Pavan

Hello,
I wasn't asking about the commit.
In the first post you said:
"The waiting time is varying from time to time some times it is getting executed in 20 min, some time it is taking 1 hr no fixed time."
And in the latest post you said:
"but no matter it is not moving to the next step"
Which one is true?
And anyway, commiting the result of a decision step is not, I think, something that can be delayed.
regards
Rick Bakker
Hanabi Technology

Steps are not displayed in LSMW

When I open as LSMW in dutch language the STEPs are not displayed.But when the same LSMW is opened in english language the steps are visible.
Thanks in Advance.

Hi All,
Found solution for steps not displayed in LSMW:
Transaction :SMLT
check whether your language (DUTCH in mycase) has supplemention with ENGLISH OR GERMAN Language If not then import neccesary package.
For more details refer SAP note:761911

Problem in merge statement -ORA-27432 Step does not exist for chain

Hi
I m getting ORA-27432 Step does not exist for chain error in merge statement.Please explain the same.
MERGE INTO fos.pe_td_hdr_sd B
USING (
         SELECT ACTIVE, ADDUID, ADDUIDTIME,TDKEY         FROM pe.pe_td_hdr
          WHERE (adduidtime like '20070104%' or edituidtime like '20070104%')
          AND NVL(legacy_td,'N')<>'Y'
          AND SUBSTR(adduidtime,1,4)='2007'
          AND AMENDMENT_NO=0)A ON ( B.TDKEY = A.TDKEY)
WHEN MATCHED THEN
    UPDATE SET B.ACTIVE=A.ACTIVE,
B.ADDUID=A.ADDUID,
        B.ADDUIDTIME=A.ADDUIDTIME
WHEN NOT MATCHED THEN
                INSERT
                          B.ACTIVE,
                          B.ADDUID,
                          B.ADDUIDTIME)
                    VALUES(
                          A.ACTIVE,
                          A.ADDUID,
                          A.ADDUIDTIME)This query is a short version of the main query.It is same but having 180 columns in original table.

What version of Oracle are you using? This message does not appear in my 10.1 Error Messages document, but the other messages in that range seem to be about DBMS_SCHEDULER.
Are you using scheduler somewhere around where you are getting the error message?
John

Manual Bank statement not posted

Dear All
Can any one tell me why Manual Bank statement not posted
in to the respective G L Accounts though in the bank statement overview it is showing as Manual Posting complte .
I also noticed that in SM37 spool requests were created for those bank statement which are not posted .
I observed that for those Bank statements Batch input sessions were created but deletion indicator has set .
Appreciate your help and points are awarded .
Regards
Ravindra.

Hi Mark
Thanks for the response . I have checked the configuration posting rules ande found that correct bcz only on that date these bank statments were not posted , all subsequest bank statements were posted sucessfully .
As i have mentioned previously, In SM35 i could see two sessions which are relating to these two bank statements
but those two sessions were set deletion indicators .
I am not sure of whether we can process those two batch input
seessions for which deletion indicator set .
Regards
Ravindra

HT201263 these steps is not working it will go the when it's down restoring it with tell me to connect to itunse

these steps is not working because every time it down restoring it will still say ipod disable connect to itunes

Try placing the iPod in DFU mode and then restore:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Manual steps in note 901068

Similar Messages

Maybe you are looking for