Manual Syndication - User ID

Hi Experts,
From one of the repository; the data is syndicated from MDM to ECC around 20,000 records on a particular date. On that particular date only few records got updated i.e. around 20. When we checked the Logs, Connections & Report we could not find the User ID who has syndicated around 20,000 Records manually.
Apart from these can we check which user ID has logged in & Syndicated in Mass for tracking purpose?
Thanks & Regards,
UG

Hi UG ,
I would suggest you to do 2 changes in the your system .
1) Add 4 new fields Created user, Updated user, Created Time , Updated time in your repository.
2) On the Syndication Map check the "Suppress Unchanged record" to true.
What this does is firstly you can track the created and updated user and time stamps on the Data Manager.
Secondly , The user is forced to make a change on the record (Which will make sure his ID is tracked) if the "Suppress Unchanged record" is set to true.
PS : Do make sure no authorization is given to change the syndication map , else there is no point.
Regards,
Vag Vignesh Shenoy

Similar Messages

How to permanently/manually delete User Account on MAC OS X 10.6.8

Hi There,
Can you please assist with providing instructions on how to manually delete USER accounts on MAC OS X 10.6.8. Everyone but one user (who's account was deleted) can not log into the damain device. As a test I tried to add a new user accout with the same name as before and even though nothing existing in the USERS folder; it states that a duplicate name exists.
How do I delete that duplicate? Where could that be located?
Please let me know,
Sonia

Solution!
Command to locate the hidden User Profile:
dscl . list /users
Command to delete the now found hidden User Profile:
sudo dscl . delete /users/<userID>
Thanks,
SoniaCP

MANUAL SYNDICATION

How can I do manual syndication using with MDM PI Adapter? I open a map, but it prompts me where to save the XML file. For FTP you need to point the XML to the ready but for an MDM PI Adapter, what would I be needing to direct the XML file for the PI to pick it?
Is there a way where I can save the XML Files in my local drive and PI to pick the files from mine?
Many thanks!

Hi,
Is there a way to clear mapping and leave the required map for syndication?
See, if your requirement is to change the existing map and make it work as per the requirement to do manual syndication using Port. You can go ahead but when you open map using File>New>Type=Port, Remote System= required Remote System and Port= Defined in MDM PI Adapter of PI. Here yuo can edit this map but make sure after editing it save it as SAVE AS option (by giving some new map name say XYZ ) so that your existing map remain with you for future reference. Now you need to set this map XYZ into your Outbound Port for this remote system using MDM Console. So afterwards if you go for manual syndication your syndication will occur as per your required map.
Regards,
Mandeep Saini

Looking for Java Reference Manual, Not User Manual

I'm a mainframe programmer learning Java. I'm going thru "The Complete Reference Java" by Schildt. In the mainframe world, manuals are usually broken into reference manuals (shows just the syntax) and user manuals (shows how to do things). I'm looking for a pure Java reference manual that strips away all of the verbose explanation of how to do things and just lists in an organized way the pure syntax of Java. Does anyone know of such a manual? Everything I've found so far falls more into the user manual category that perhaps contains the syntax somewhere (if you look for it), but is overburdened with tons of explanations. Thanks.

Thanks. What you provided is a bit like a reference manual and user manual combined into one. It has the complete syntax along with plenty of explanations. BTW, I think I know where Schildt got most of his material for his Complete Java Reference book. It's almost like he took the Java Language Specification book and reorganized it into a tutorial format.

Error when manually adding user to project workspace

I am currently using Project Server 2010. I have a requirement for Business Users to have access to the project workspaces in Sharepoint but not be users of the PWA. Similar to as it is outlined in this Microsoft Documentation (http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx)
There might be a circumstance where you want to grant people who are not members of the project access to the project workspace site. Anyone assigned to the Web Administrator group can create new users for a project workspace site. In addition to the
four groups that were mentioned earlier, there are four default SharePoint Server 2010 groups. They are as follows:
Full Control   Has all personal, site, and list permissions.
Design   Can edit lists, document libraries, and pages in the Web site.
Contribute   Can view pages and edit list items and documents.
Read   Can view pages, list items, and documents.
I have added the user to the Contributor group but when they try to contribute to the space, ie add documents or an issue/risk, they recieve an error, similar to as is documented in the following article (http://pwmather.wordpress.com/2011/07/11/manually-adding-users-to-project-workspace-project-site-in-projectserver-ps2010-ps2007-epm/)
What has been identified in this article makes sense.  I am just wondering why Microsoft documentation states that it can be done.
Any thoughts?

Chris,
The Microsoft article says, users who are not part of the project. It does not say not part of project server.
However, as far as I can remember, this scenario could work if the "Synchronization" is turned off between Project Server and Project Sites. I will run a test and confirm, later today.
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com

Scanjet 6300c manual or user guide

I was just given a Scanjet 6300c, and was able to download the software from HP support, but the links for setup and configure only provide a list of what is not supported, instead of the documents that should be there.
Anyone have a copy of the manual or user guide ? Anything that explains how to scan slides with the triangle would also be great.
TIA

Hello @netnoodle,
Welcome to the HP Forums!
I understand you would like a user guide for the Scanjet 6300C. I will do my best to assist you! Unfortunately, there are no users guides for this particular Scanjet on the HP website here.
Now, I will provide the Scanjet 5590 user guide. This does explain how to scan slides, but the steps could be different. Give this a try to see if this works.
Sorry for the inconvenience.
I worked on behalf of HP.

How to manually recover user state data saved to a State Migration Point

Hi,
In SCCM 2012, how would you recover the User State saved to the State Migration Point manually?
In SCCM 2007 you could do what was outlined here:
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/159affd3-1726-4829-a0f4-0c875481fc11
However this does not work for SCCM 2012 because the User State Recovery key so long that it cannot be used with a loadstate command (Loadstate commands cannot be longer than 256 characters)
Previously you could also have just opened the User.mig file using Windows Easy Transfer and entered the User State Recovery key stored in SCCM - however in SCCM 2012 this does not work either!
I really need to recover the contents for a user who got a new computer (old one stolen) and requires data from a previous user state capture on the State Migration Point.

Hi,
It seems something changed in SCCM 2012.
I've got the same problem and after couple hours of research I found MS article that only helped me -
http://technet.microsoft.com/en-us/library/hh824962.aspx
In SCCM server I run this command:
C:\Program Files (x86)\Windows Kits\8.0\Assessment and Deployment Kit\User State Migration Tool\amd64>usmtutils.exe /extract C:\tmp\_MIG\USMT.MIG C:\tmp\_MIG\Extract /decrypt /keyfile:C:\tmp\_MIG\Key.txt
and received necessary data.

How to manually migrate user data under Mountain Lion?

I want to manually migrate my user data from a cloned back-up to my iMac after a clean install of Mountain Lion. I do not want to use Migration Assistant because of the probabily of re-importing some of the problems I'm trying to fix. (This is at the tail end of a long trouble shooting process trying to fix a very very slow computer aftere a ML upgrade from Lion. Clean install of ML is a last resort)
There used to be an excellent list by Kappy (I think) on this sort of migration under earlier systems and from PPC to Intel. But that link seems to have been taken down.
We plan to reinstall all software from scratch after the clean install, so that is not an issue. And I know how to move the normal files in documents, music and the like. I am most concerned about are:
• Making sure I move the right files/folders in the Library related to Apple apps like iTunes, iPhoto, Address Book, Calendar, iWork apps, iPhone backups, etc. plus system/network settings.
• Are there other specific files/folders necessary due to iCloud that are new to Mountain Lion that need moved?
• How to do this in a way that ensures that all permissions will be OK under the new user?
The goal is a new fresh user on a clean fresh ML install that is identical to the current user in name, function and above all, permissions.
Can anyone provide a list of the main files/folders necessary to transfer ideally along the lines of Kappy's earlier and excellent guide?
Thanks for any help!!
~Roger

So long as you use iCloud for Mail, Contacts and Calendars, run software update(s) after installing each app, they will build new preference files for themselves. iTunes will back up the phone too. System settings are likely to change. I found the firewall off and energy saver preferences default. Trackpad options for tap to click and drag lock may change.
Some of the updates are quite large so it takes a few hours and you need any purchase key codes handy for re-registration of software.

Officejet Pro K8600 Manual Feed - User Guide Instructions

After much difficulty trying to use the K8600 rear manual feed slot, I stumbled into the instructions for loading paper in the user guide. I think the "Print with the rear manual feed slot" instructions should be modified to make it clear that paper loading is much more complex than one might expect. This is the first time I encountered a printer where just placing the paper in the feed slot and then telling the software to print does not work. The "Load media" reference must be read to be successful. The correct procedure is:
1. Set the printer preferences to "manual feed"
2. Wait for the resume light to blink.
3. Place the paper in the rear slot.
4. Press the resume button (far right button).
5. Wait for the printer to detect the paper.
6. Press the resume button again to print.
The manual feed documentation and hardware fails the "user friendly" test. The printer preferences dialog could (should?) display some instructions when the manual feed paper source is selected.
Comments or criticism is welcome.

Thanks for this. I found the same. I also found that you have to give the paper/card a slight push to get the printer to recognise and feed it at step 3. Maybe the rear feed is faulty or needs a clean.
It took ages to get it to work and I must say that whilst this printer is great when it works, getting it to work reliably is another matter. I have it attached as a network device and it often just stops working. I believe HP release updates for this from time to time so it must be a recognised problem.
I have also just replaced a print head (black/yellow) and the new replacement was faulty, so I don't seem to have much luck. I had a CP1700 before this one and that was also unreliable. I had had hoped that the 8600 would be reliable, but this puts me off buying another HP unit for the office.
Perhaps someone from HP will kindly reply and advise if there are any suitable maitneance steps or checks that I can make. That would help to restore confidence.

HOW DO I MANUALLY ENTER 'USER I.D.' AND 'PASSWORD' INTO "SAVED PASSWORDS" WHEN FIREFOX CANNOT 'SAVE' THEM? THANK YOU!

(EXCUSE MY ALL CAPS - VISION PROBLEM)
PASSWORD CAPTURE IS A GREAT FEATURE! BUT - ON SOME FEW SITES, FIREFOX CANNOT CAPTURE USER I.D. AND PASSWORD - SO - HOW CAN I MANUALLY ENTER THIS INFO INTO 'SAVED PASSWORD' UNDER TOOLS/OPTIONS?
THANK YOU: JNR

Be aware that if Firefox doesn't offer to store a password then Firefox probably won't fill the password as well if you visit that website and sign on. 
In that case you can try to type the first letter of the name and/or double click the name field or press the cursor Down arrow.
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Deselect: [ ] "Permanent Private Browsing mode"
The website may be using autocomplete=off to prevent Firefox from saving the name and password. 
If that is the case then you can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

Manually augmenting users/groups for wiki server.

can someone tell me what a group looks like after its been augmented for use by wiki server? i need to manually change this because i need leopard installed in advanced mode and i also need to use my tiger OD server as my OD server NOT leopard. what i am trying to do is unsupported, i know, but i don't care if i have to write lines of code for every user, i just need to get it done.
is anyone else out there dealing with this?

Hi
You could have tried this yourself however what follows takes all of 10-15 seconds and should give you pretty much anything you want:
dscl
list
cd LDAPv3
list
cd IPaddress or FQDN of your LDAP Server
You should now see something like this:
AccessControls
AutoServerSetup
CertificateAuthorities
ComputerLists
Computers
Config
FileMakerServers
Groups
Locations
Machines
Mounts
Neighborhoods
People
PresetComputerLists
PresetGroups
PresetUsers
Printers
Users
cd Users
list
You should now see something like this:
diradmin
root
user1
user10
user2
user3
user4
user5
user6
user7
user8
user9
vpn_73565997fb81
Follow this with read followed by the the name of the user you are interested in. eg:
read user1
You should now see a whole raft of information some of which will look like this:
NFSHomeDirectory: /Network/Servers/serverfqdn/Volumes/HardDrive/Users/user1
Password: ******
PhoneNumber: 12345 678901
Picture: /Library/User Pictures/Nature/Cactus.tif
PostalCode: NG16 2DQ
PrimaryGroupID: 20
RealName: User1
RecordName: user1 User1
RecordType: dsRecTypeStandard:Users
State: addressinfo
Street: addressinfo
UniqueID: 1025
UserShell: /bin/bash
As you can see you get the UID number as well as the GUID. Does this answer your post?
Tony

SLA Dates needs to be changed manually by user.

Hi,
I have a requirement that The SLA dates need to be changed manualy by a user (for a service request) based on the authorisation of a user. Is there any enhancement or related to config.?
thnks in advance.

Hi,
I am not sure how ur business is running on. let me tell if u r doing the transaction in the webui are ic agent make sla date fields in display and edit mode based on the authorization or the business role. in case of gui not sure you need to debug and identify the authorization object for that one.
regards,
gobi

Tfpt manual or user's guide

Is the TFPT documentation as terrible as it seems to be? it took me forever to figure out that TFPT isn't working properly unless run from the mapped workspace. The fact that "TFPT getcs" creates files under the workspace folder isn't well documented.
Anyone have pointers to good docs? Is Microsoft hiding the details intentionally?

Hi Smartyollie,
Thanks for your post.
For the TFPT document, on the machine which installed TFS Power Tools,
click Star>> All Programs>>
MS TFS Power Tools>> Power Tools Help>>select Team Foundation Power Tool(TFPT.exe).
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User manuals

Hi
could anyone send me the user manuals or user test script on AR, AP, GL and Asset.
send it to----
[email protected]
thanks

hi,
i am sending u document on ur mail.pl asign points
kuldeep

Q5 Manuals, User Guides and How To links

Find your Q5 Manuals and User Guides in the links below.
General Q5 Support page
Visit the Inside BlackBerry HelpBlog
How To - BlackBerry Q5 Smartphone
10.1
HTML
User Guide - BlackBerry Q5 Smartphone
10.1
PDF
How To Demos - BlackBerry Q5 Smartphone
Video
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Anjalif wrote:
Hi - i cant find anything in these manuals that tells me how to backup the contacts on my phone to my laptop? that option doesnt seem to be available on BB Link
Using Link, by backing up the device you backup contacts. Your backup is made of three separate modules: Settings, Media and App Data. Your contacts are included in the Settings backup.
If you want a Contacts-only backup, try using the third party app "In Touch Contacts" from BlackBerryWorld. It works great to do what you want. I am using it, in addition to my Link backups.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Manual Syndication - User ID

Similar Messages

Maybe you are looking for