Manual tabular form (Multiple Tabular forms)
Hi,
I am using APEX v4.0.
In my application, I am having a few issues with the generation of a manual tabular form. I need two tabular form on the page so I have created the first using a wizard and the second through the use of a collection using skillbuilders tutorial at http://www.skillbuilders.com/webinars/webinar.cfm/49?title=Manual%20Tabular%20Forms%20in%20Oracle%20APEX:%20A%20Methodology%20that%20Works
Independently, they work as expected i.e. if I have a condition on the 1st tabular form to never display and only display the 2nd, it works fine and vice versa. However, if I try to try to display them both, I am getting errors.
When both forms are displayed and I make a change to the form generated by the wizard, I am getting the error 'ORA-01403: no data found'.
When both forms are displayed and I make a change to the form I generated manually, I am getting the error 'ORA-01722: invalid number'.
Can someone please suggest where I should be looking as independently they are working fine, but when they are both on the page together, they are not.
Thanks
Hi Nicollette,
I have got a bit further with it now thanks. The wizard form is now working when BOTH forms are displayed. I am still having a few issues with the manual one. When I try to insert a record I am getting:
ORA-01410: invalid ROWID
Error
It is now letting me delete and update though.
I have the following as a before submit process:
DECLARE
l_collection_name APEX_COLLECTIONS.COLLECTION_NAME%TYPE;
l_original_md5 VARCHAR2(32);
l_latest_md5 VARCHAR2(32);
BEGIN
l_collection_name := 'QC_COMPLAINT_MODELS';
FOR x IN 1 .. apex_application.g_f49.count
LOOP
IF apex_application.g_f10(x) IS NOT NULL --ID exists, check to see if record was updated
THEN
SELECT c048
INTO l_original_md5
FROM apex_collections
WHERE collection_name = l_collection_name
AND seq_id = apex_application.g_f49(x);
l_latest_md5 := wwv_flow_item.md5(
apex_application.g_f10(x),
apex_application.g_f11(x),
apex_application.g_f12(x),
apex_application.g_f13(x),
apex_application.g_f14(x)
IF l_original_md5 != l_latest_md5
THEN
apex_collection.update_member(
p_collection_name => l_collection_name,
p_seq => apex_application.g_f49(x),
p_c010 => apex_application.g_f10(x),
p_c011 => apex_application.g_f11(x),
p_c012 => apex_application.g_f12(x),
p_c013 => apex_application.g_f13(x),
p_c014 => apex_application.g_f14(x),
p_c047 => 'U',
p_c048 => apex_application.g_f48(x)
END IF;
ELSE --ID does not exist, must be new record
apex_collection.update_member(
p_collection_name => l_collection_name,
p_seq => apex_application.g_f49(x),
p_c010 => apex_application.g_f10(x),
p_c011 => apex_application.g_f11(x),
p_c012 => apex_application.g_f12(x),
p_c013 => apex_application.g_f13(x),
p_c014 => apex_application.g_f14(x),
p_c047 => 'U',
p_c048 => apex_application.g_f48(x)
END IF;
END LOOP;
IF :REQUEST = 'DELETE_MOD'
THEN
FOR x IN 1 .. apex_application.g_f50.count
LOOP
apex_collection.update_member_attribute(
p_collection_name => l_collection_name,
p_seq => apex_application.g_f50(x),
p_attr_number => '47',
p_attr_value => 'D'
END LOOP;
END IF;
END;and this as an after submit process:
DECLARE
l_table_md5 VARCHAR2(32);
l_collection_name APEX_COLLECTIONS.COLLECTION_NAME%TYPE;
l_del_count PLS_INTEGER := 0;
l_upd_count PLS_INTEGER := 0;
l_ins_count PLS_INTEGER := 0;
l_success_message VARCHAR2(32767);
CURSOR op_lock_check_cur (
p_id IN NUMBER
IS
SELECT wwv_flow_item.md5(cm_id, serial_number, fd_number, complaint_id, model_name)
FROM XXMEL_QC_COMPLAINTS_MODELS
WHERE cm_id = op_lock_check_cur.p_id
FOR UPDATE;
BEGIN
l_collection_name := 'QC_COMPLAINT_MODELS';
FOR x IN (
SELECT *
FROM apex_collections
WHERE collection_name = l_collection_name
AND c047 IN ('N','U','D')
LOOP
IF x.c047 = 'N'
THEN
INSERT INTO XXMEL_QC_COMPLAINTS_MODELS(
cm_id,
serial_number,
fd_number,
complaint_id,
model_name
) VALUES (
XXMEL_QC_COMPLAINTS_MODELS_S.nextval,
x.c011,
x.c012,
x.c013,
x.c014
l_ins_count := l_ins_count + 1;
ELSIF x.c047 = 'U'
THEN
--Optimistic lock check
--MD5 should be identical to collection initialization proc
OPEN op_lock_check_cur(x.c010);
FETCH op_lock_check_cur INTO l_table_md5;
-- Compare the checksum values and if they are different, raise an error.
IF l_table_md5 != x.c048
THEN
raise_application_error(
-20001,
'Current version of data in database has changed '
|| 'since user initiated update process.'
END IF;
UPDATE XXMEL_QC_COMPLAINTS_MODELS
SET serial_number = x.c011,
fd_number = x.c012,
complaint_id = x.c013,
model_name = x.c014
WHERE CURRENT OF op_lock_check_cur;
CLOSE op_lock_check_cur;
l_upd_count := l_upd_count + 1;
ELSIF x.c047 = 'D'
THEN
DELETE FROM XXMEL_QC_COMPLAINTS_MODELS
WHERE cm_id = x.c010;
l_del_count := l_del_count + 1;
END IF;
END LOOP;
apex_collection.delete_collection(p_collection_name => l_collection_name);
l_success_message :=
l_ins_count || ' rows inserted, ' ||
l_upd_count || ' rows updated, ' ||
l_del_count || ' rows deleted';
:P8_SUCCESS_MESSAGES := l_success_message;
END;Thanks
Edited by: Cashy on 17-Oct-2012 02:12
Similar Messages
-
Problem in saving BLOB on a manual tabular form
Hi All,
I have a manual tabular form which has one column as file browse (blob). When I browse and select some file to save with the row, it saves only the name of the file, not the actual file.
The example form is available on apex.oracle.com. The page has a process called SAVE which is supposed to save the record with blob.
Workspace: bobforum
user: forum
password: abc123
Application: 39196
Page: 1
I will appreciate if someone can help.
Thanks,
ZkayHi,
What I did check, apex_application.g_fnn array do not work for this.
From Google I did found that it has work in previous APEX version.
Something has changed and e.g. Denis example for multiple file browser do not work anymore.
http://htmldb.oracle.com/pls/otn/f?p=31517:161
I did manage upload files to wwv_flow_files table when using apex_application.g_xnn.
I did add derived column to report. To HTML expression I did place
<input type="file" name="x0#ROWNUM#" />
This way you could have report that shows max 20 rows in pagination page.
But I did not find way to identify file uploaded to flow files.
In After submit process apex_application.g_xnn seems have null value,
so I could not query wwv_flow_files by name column and insert file to my own table.
Regards,
Jari -
Query for create manual tabular form using apex collection using item textfield with autocomplete
can we create a manual tabular form inside item textfield with autocomplete ?
how it is possible?
with Apex_item API used for this item.
i used this code for creat cascading select list
select seq_id,
APEX_ITEM.SELECT_LIST_FROM_QUERY(
p_idx => 1,
p_value => c001,
p_query => 'SELECT C001 D
, C002 R
FROM APEX_COLLECTIONS
WHERE COLLECTION_NAME = ''col1''',
p_attributes => 'style="width:150px" onchange="f__name(this,parseInt(#ROWNUM#));"',
p_show_null => 'Yes',
p_null_value => null,
p_null_text => '- Select name -',
p_item_id => 'f01_'|| LPAD (ROWNUM, 4, '0'),
p_item_label => 'Label for f01_#ROWNUM#',
p_show_extra => 'NO') name,
APEX_ITEM.SELECT_LIST_FROM_QUERY(
p_idx => 2,
p_value => c002,
p_query => ' SELECT null d, null r FROM dual WHERE 1 = 2
p_attributes => 'style="width:150px"',
p_show_null => 'Yes',
p_null_value => null,
p_null_text => '- Select name -',
p_item_id => 'f02_'|| LPAD (ROWNUM, 4, '0'),
p_item_label => 'Label for f02_#ROWNUM#',
p_show_extra => 'NO')name2,
from apex_collections
where
collection_name = 'COLLECTION1'
It is fine .
but i want item in tabular form textfield with autocomplete and remove select list. my requirement is using textfield with autocomplete select a employee name and second item textfield with autocomplete display dependent perticular employee related multiple task.
how it is created.i have no idea related textfield with autocomplete.Please help me....pt_user1
I understand that the add row button is currently doing a submit.
To not submit the page you need a dynamic action on the page.
Does the javascript function addRow do what you want?
Otherwise have a look at the following two threads Add row in manual tabular form using dynamic action and Accessing Tabular Form & Add Elements to Collection without Page Submit.
You're process could be something like:
Add the new values to the collection using the idea's in the second thread and at the same time add the new row.
And as second action refresh your tabular form.
If you get stuck set up what you have done on apex.oracle.com using the tables from the demo application.
Nicolette -
Two Manual Tabular forms in a same page
Since i have to create two tabular forms in a same page, i created tabular forms manually.
Both the forms are working fine if the columns are not defined as conditional display.
Based on item value set by user, few fields should be either displayed as text field (editable) or read only (display).
I created two columns for a same field one as editable another one as non editable.
Based on item value any one of the column will be displayed.
Since the manual tabular form update process is using 'apex_application.g_f02', if any one of the column is not visible,
multiple row update is failing.
can any one please help me or suggest me to solve this.
Edited by: Ravi on Apr 19, 2012 9:02 AMI'm guessing you have a page item that is used to control display of the columns as display only or editable.
If that's true and the page item tells you to display the editable column, then you end up with say a g_f02 and a g_fo3, where you otherwise might only have a g_fo2.
Use the value of the page item in your update process to control which tabular form element to use. -
Apex 3.2
I have written a manual tabular form and it has a validation to check if a column contains negative numbers.
If it does then it returns a validation error.
I also have the same validation in my database procedure which raises
RAISE_APPLICATION_ERROR(-20000, 'The update procedure does not accept negative numbers.');My problem is withmy page validation.
If the column value was 16 and the user types in, eg, -12, then the validation fires and returns the message.
The problem is that once the message is returned, the column value is reset to the original value, eg, 16.
If I disable my page validation and use my database exception.
Then the error message from the database displays. If I click ok, then the form displays the new value, eg, -12.
I want to use my page validation, but I need the page to show the new value.
I have made all my processes and branches conditional to run only if there are no inline validations displayed,
but this did not affect anything.
Any help appreciated
GusGus C wrote:
It works exactly how I want mine to, without using collections, ie, it keeps the new values in the page.
Unfortunatley I cannot figure out how he does thatUpgraded to 4.2 ;)
One of the differences between version 3 and 4 is that retaintion/caching of the changed values in tabular forms.
In other words in apex 4 the builder takes care of showing the new changed value.
By not fetching the data from the database on a validation error.
Where as in Apex 3 you have to do that when there is a validation error and the message is shown on the same page.
The report fetches the data from the database even when there is a validation error.
There are 2 options
1) Let the validation message be shown on the error page. Going back in the browser history doesn't fetch the data form the database up on rerendering.
This option is mentioned in the thread the demo was inspired by.
2) Work with a collection. Where you take care of the caching. This method gives the posibility to so multiple validation messages where as the "show on error page" shows only one validation message.
Nicolette -
Creating a manual tabular form on an empty table
Hi all,
I am trying to create a manual tabular form on an empty table. Is it possible to display textboxes and column headers, when I run the report I get "no data found".
Regards,Hi Denes and thank you for your valuable input.
My problem is in fact that, I have created the tabular form by using a report region with a SQL query, something like,
select apex_item.display_and_save(1, p.bolge) bolge,
apex_item.display_and_save(2, p.hafta) hafta,
apex_item.display_and_save(3, p.yil) yil,
apex_item.display_and_save(4, p.mamul) mamul,
apex_item.display_and_save(5, p.tahmin1) tahmin1,
apex_item.display_and_save(6, p.tahmin2) tahmin2,
apex_item.display_and_save(7, p.tahmin3) tahmin3,
apex_item.display_and_save(8, p.tahmin4) tahmin4,
apex_item.display_and_save(9, p.tahmin5) tahmin5,
apex_item.display_and_save(10, p.tahmin6) tahmin6,
apex_item.display_and_save(11, p.revize4) revize4,
apex_item.display_and_save(12, p.revize5) revize5,
apex_item.display_and_save(13, p.revize6) revize6
from portal_link.v_planlama p
The problem is that, since there is no data in the table, when I run the page, I cant get the form to be rendered, and I get a nice "no data found". There should be a way to get the form rendered, hence making it available for data input.
Regards,
Onur -
Issue with APEX_ITEM.CHECKBOX in Manual Tabular Form report
Hi,
I have a simple manual tabular form report with query :
SELECT
APEX_ITEM.CHECKBOX(1,order_id) ,
APEX_ITEM.TEXT(3,Ord_number) ,
APEX_ITEM.TEXT(4,ord_flag)
from
tbl_order
and a process to update the value of Ord_number & ord_flag columns for the selected (Checked) rows.
FOR i in 1..apex_application.g_f01.count
loop
UPDATE
tbl_order
SET
Ord_number = apex_application.g_f03(i),
ord_flag = apex_application.g_f04(i)
WHERE
order_id = apex_application.g_f01(i);
END LOOP;
But the values getting updated wrongly , how can I ensure the exact values is retrieved in apex_application.g_f03(i) & apex_application.g_f04(i) ?
Regards.
BenzI think the row selector is there if you create an tabular form. However, you can create it yourself following this example:
http://apex.oracle.com/pls/otn/f?p=31517:170
Basically,
apex_item.checkbox (30,
'#ROWNUM#',
'onclick="highlight_row(this,' || ROWNUM || ')"',
NULL,
'f30_' || LPAD (ROWNUM, 4, '0')
) delete_checkboxDenes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
Can't get Delete Process to work on Manual Tabular Form
Help. My insert and update process works just fine. I can't get the delete process to work. I've searched the forum and found a couple of examples on what to do, but I can't get the examples to work. I get an ORA-01403: no data found error.
Report SQL:
select apex_item.checkbox (1, ceah_people_lang_id,'unchecked') delete_checkbox,
--'onclick="highlight_row(this,' || ROWNUM || ')"',
--null,
--'F1_' || LPAD (ROWNUM, 4, '0')) delete_checkbox,
Delete Process:
declare
begin
for i in 1..apex_application.g_f02.count
loop
--if apex_application.g_f01(i) = 'Y'
--then
delete from ceah_people_language
where ceah_people_lang_id = to_number(apex_application.g_f01(i));
--end if;
end loop;
end;
I've spent more time than I care to admit on the manual tabular form. Any help would be appreciated. Thanks, Elizabethselect apex_item.checkbox (1, ceah_people_lang_id,'unchecked') delete_checkbox,
--'onclick="highlight_row(this,' || ROWNUM || ')"',
--null,
--'F1_' || LPAD (ROWNUM, 4, '0')) delete_checkbox,
apex_item.hidden(2,ceah_people_lang_id)
||
apex_item.select_list_from_query(3,language_id,'select language_name, language_id from foreign_language') language_id,
apex_item.hidden(4,ceah_people_id) ||
apex_item.select_list_from_query(5,proficiency,'select name, id from proficiency') proficiency
from ceah_people_language where ceah_people_language.ceah_people_id = :P152_person_id
union all
select apex_item.checkbox
(1,
null,
'onclick="highlight_row(this,' || ROWNUM || ')"',
null,
'F1_' || LPAD (ROWNUM, 4, '0')) delete_checkbox,
apex_item.hidden(2,null) ||
apex_item.select_list_from_query(3,null,'select language_name, language_id from foreign_language',
'style="width:170px" ' ,
'YES',
'0',
'- Select Foreign Language -',
'f3_' || LPAD (9900 + ROWNUM, 4, '0'),
NULL,
'NO'
) language_id,
apex_item.hidden(4,null) ||
apex_item.select_list_from_query(5,null,'select name, id from proficiency',
'style="width:170px" ' ,
'YES',
'0',
'- Select Proficiency -',
'f5_' || LPAD (9900 + ROWNUM, 4, '0'),
NULL,
'NO'
) proficiency
from dual where :request = 'ADD_ROWS'
connect by level <= 2 -
How to Multi Row Update function in Manual Tabular Form
Hi All,
In my application I am using manual tabular form, for Update and insert i have written pl/sql process,
but i want to make use of MULTI_ROW_UPDATE function for update and insert operations.
How can I implement default tabular form behaviour in manual tabular form.
I am using:
Oracle Database 11g
ApEx Version 4.0
please help me, it's urgent.
thanks
MRHi Joao,
First Can u pl let us know your view is based on how many
tables?
If it is a simple view ,you can open the form in update mode
passing a parameter to it thru a procedure or thru a url or what
ever you feel like(form to form,etc)..I will give you an example
on how to open the form in update mode like below..
1.develop a form based on a simple view
2.Call that form Thru a simple URL
3.In the above you are opening a form with module id
ex:1234567890 in update mode and change portal30 to suit
accordingly..
4.You are passing a parameter called "ABCDEF" TO "NAME" Field to
that form for querrying..
5.Now the form will be opened in update mode and all the fields
are pertaining to the parameter "ABCDEF" and you can update the
fields....
II..Now regarding the check boxes i need to know which version
of the portal are u using..As for as my knowledge goes (up to
3.0.6) there are lot of bugs with the check boxes and check box
checked value is always "yes"(if u want to insert in to the data
base).So try not to depend on checkboxes and instead Combo is
the right answer till oracle portal is free of bugs.
No triggers are required for your requirement....
Hope i have answered your problem ...If any please revert back
with full details
Thanks
Vishnu Singireddy -
Apex_item.radiogroup using an LOV in a manual tabular form
I'm on APEX 4.0.0.00.46 and I'm sure there must be an obvious solution that I'm missing here, but I'm having a problem setting up an apex_item.radiogroup on a manual tabular form. This is the basic query that I'm using:
select apex_item.radiogroup(37,my_field) as my_field
from my_table
When I use the above query as my Region Source, it compiles fine. However, it seems as though the query won't pull in the value that currently exists in the table unless I set the Column Attribute called 'Display As' for the field to 'Standard Report Column'. When I do this, it seems to remove the capability to incorporate a LOV into the radio group. I'm attempting to incorporate a query like this into the radiogroup:
select 'YES' d, 'Y' r
from dual
UNION ALL
select 'NO' d, 'N' r
from dual
So, to recap, I can set up a Radio Group (query based LOV), but if I do, the query of the table will not pull in the current value from the table. If I change the 'Display As' Column Attribute to 'Standard Report Column', I can no longer incorporate the LOV. Please help if you have any ideas.I am not 100% sure what you are trying to do but I think I am close. Try using
SELECT apex_item.radio_group_from_query
(37,
my_field,
'SELECT ''YES'' d, ''Y'' r FROM dual
UNION ALL
SELECT ''NO'' d, ''N'' r FROM dual'
) AS my_field
FROM my_tableDenes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
Hi everyone,
I have created a maual tabular form with the help of (HOW TO) document in OTN.For that I wrote maual update and manual delete process and evething is working fine.But in the manual update process i did not include the code to compare the checksum of the submitted data with the old data (still its working fine).But in my application i have created several manual tabular forms like this .Do the application get any problem in the futher as i am not checking the checksum.If i compare the checksum i am getting error.I decoded that error by
inserting the checksum values to a (test table).The checksum values for a row is changing even if there is no change in the data of the table.
any suggestions please
Here is my code
declare
l_cks wwv_flow_global.vc_arr2;
j pls_integer := 1;
begin
-- Get original MD5 checksum
-- select wwv_flow_item.md5( column1,column2,column3,column4) cks
-- BULK COLLECT INTO
--l_cks
-- from table;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
-- for i in 1..l_cks.count
--loop
--if htmldb_application.g_fcs(i) != l_cks(i) then
-- rollback;
--raise_application_error(
-- -20001,
-- 'Current version of data in database has changed '||
-- 'since user initiated update process.');
-- return;
--end if;
--end loop;
-- update EMP
for i in 1..htmldb_application.g_f07.count
loop
if htmldb_application.g_f07(i) is not null then
update table
set
column2 = replace(htmldb_application.g_f08(i),'%'||'null%',NULL)
where column1 = htmldb_application.g_f07(i);
else
if htmldb_application.g_f08(i) is not null then
insert into table
( column1 ,
column2,
column3)
values
replace(htmldb_application.g_f08(i),'%'||'null%',NULL));
end if;
end if;
end loop;
end;
Thanks
phaniPhani,
I don't understand what you have working, what does not work, and what that code does (much of it is commented out). Can you put an example on apex.oracle.com that shows the problem?
Scott -
Checksum error in Manual Tabular Form
Hi everyone,
I have created 2 (manual tabular forms) on a same page but i am getting checksum error for one of the tabular form.
Here is my code:
1 st Tabular Form:
select
x.del,
x.ECGEXST_ID,
x.LEAD_CD,
x.ST_ID,
x.ENTERED_DTS,
X.ENTERED_BY_NM,
X.UPDATED_DTS,
X.UPDATED_BY_NM,
x.cks
from (
select
htmldb_item.checkbox(1,ECGEXST_ID) del,
htmldb_item.hidden(2,ECGEXST_ID) ECGEXST_ID,
htmldb_item.select_list_from_query (3, LEAD_CD,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(5,ST_ID,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 17',25) ST_ID,
wwv_flow_item.display_and_save(6,to_char(ENTERED_DTS,'MM/DD/YYYY')) ENTERED_DTS,
au.LAST_NM || ', ' || au.FIRST_NM ENTERED_BY_NM,
wwv_flow_item.display_and_save(7,to_char(UPDATED_DTS,'MM/DD/YYYY')) UPDATED_DTS,
au1.LAST_NM || ', ' || au1.FIRST_NM UPDATED_BY_NM,
htmldb_item.md5_checksum(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
from ECGEXST,
app_user au,app_user au1 where au.MSPR_ID(+) = ECGEXST.ENTERED_BY_MSPR_ID and au1.MSPR_ID(+) = ECGEXST.UPDATED_BY_MSPR_ID
and ECGEXDT_ID = :P65_ECGEXDT_ID
union all
select
htmldb_item.checkbox(1,null) del,
htmldb_item.hidden(2,null) ECGEXST_ID,
htmldb_item.select_list_from_query (3,null,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(5,null,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 17',25) ST_ID,
wwv_flow_item.display_and_save(6,null) ENTERED_DTS,
null ENTERED_BY_NM,
wwv_flow_item.display_and_save(7,null) UPDATED_DTS,
null UPDATED_BY_NM,
htmldb_item.md5_checksum(null,null,null,null,null) cks
from dual) x
UPDATE PROCESS:
declare
l_cks wwv_flow_global.vc_arr2;
j pls_integer := 1;
val1 varchar2(100);
val2 varchar2(100);
begin
-- Get original MD5 checksum
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO
l_cks
from ECGEXST where ECGEXDT_ID = :P65_ECGEXDT_ID;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
for i in 1..l_cks.count
loop
if htmldb_application.g_fcs(i) != l_cks(i) then
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
-- return;
end if;
end loop;
-- update ECGRSTST
for i in 1..htmldb_application.g_f02.count
loop
if htmldb_application.g_f02(i) is not null then
update ECGEXST
set
ECGEXDT_ID = :P65_ECGEXDT_ID,
LEAD_CD = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
ST_ID = replace(htmldb_application.g_f05(i),'%'||'null%',NULL)
where ECGEXST_ID = htmldb_application.g_f02(i);
else
if htmldb_application.g_f03(i) is not null then
insert into ECGEXST
(ECGEXST_ID ,
ECGEXDT_ID,
LEAD_CD,
ST_ID)
values
(ECGEXST_SEQ.nextval,
:P65_ECGEXDT_ID,
replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
replace(htmldb_application.g_f05(i),'%'||'null%',NULL));
end if;
end if;
end loop;
end;
The first tabular form is working fine.But for the second tabular form i am getting the checksum error.I have created a test table and checked the checksum values.The checksum values are changing.
Here is the code of my 2nd tabularform:
select
x.del,
x.ECGEXT_ID,
x.LEAD_CD,
x.T_ID,
x.ENTERED_DTS,
X.ENTERED_BY_NM,
X.UPDATED_DTS,
X.UPDATED_BY_NM,
x.cks
from (
select
htmldb_item.checkbox(11,ECGEXT_ID) del,
htmldb_item.hidden(12,ECGEXT_ID) ECGEXT_ID,
htmldb_item.select_list_from_query (13, LEAD_CD,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(15,T_ID,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 18',25) T_ID,
wwv_flow_item.display_and_save(16,to_char(ENTERED_DTS,'MM/DD/YYYY')) ENTERED_DTS,
au.LAST_NM || ', ' || au.FIRST_NM ENTERED_BY_NM,
wwv_flow_item.display_and_save(17,to_char(UPDATED_DTS,'MM/DD/YYYY')) UPDATED_DTS,
au1.LAST_NM || ', ' || au1.FIRST_NM UPDATED_BY_NM,
htmldb_item.md5_checksum(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
from ECGEXT,
app_user au,app_user au1 where au.MSPR_ID(+) = ECGEXT.ENTERED_BY_MSPR_ID and au1.MSPR_ID(+) = ECGEXT.UPDATED_BY_MSPR_ID
and ECGEXDT_ID = :P65_ECGEXDT_ID
union all
select
htmldb_item.checkbox(11,null) del,
htmldb_item.hidden(12,null) ECGEXT_ID,
htmldb_item.select_list_from_query (13,null,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(15,null,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 18',25) T_ID,
wwv_flow_item.display_and_save(16,null) ENTERED_DTS,
null ENTERED_BY_NM,
wwv_flow_item.display_and_save(17,null) UPDATED_DTS,
null UPDATED_BY_NM,
htmldb_item.md5_checksum(null,null,null,null,null) cks
from dual) x
UPDATE PROCESS:
declare
l_cks wwv_flow_global.vc_arr2;
j pls_integer := 1;
val1 varchar2(100);
val2 varchar2(100);
begin
-- Get original MD5 checksum
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO l_cks
from ECGEXT where ECGEXDT_ID = :P65_ECGEXDT_ID;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
for i in 1..l_cks.count
loop
if htmldb_application.g_fcs(i) != l_cks(i) then
-- val1 := htmldb_application.g_fcs(i);
-- val2 := l_cks(i);
-- insert into test2 (val_1,val_2) values (val1,val2);
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
return;
end if;
end loop;
-- update ECGRSTST
for i in 1..htmldb_application.g_f12.count
loop
if htmldb_application.g_f12(i) is not null then
update ECGEXT
set
ECGEXDT_ID = :P65_ECGEXDT_ID,
LEAD_CD = replace(htmldb_application.g_f13(i),'%'||'null%',NULL),
T_ID = replace(htmldb_application.g_f15(i),'%'||'null%',NULL)
where ECGEXT_ID = htmldb_application.g_f12(i);
else
if htmldb_application.g_f13(i) is not null then
insert into ECGEXT
(ECGEXT_ID ,
ECGEXDT_ID,
LEAD_CD,
T_ID)
values
(ECGEXT_SEQ.nextval,
:P65_ECGEXDT_ID,
replace(htmldb_application.g_f13(i),'%'||'null%',NULL),
replace(htmldb_application.g_f15(i),'%'||'null%',NULL));
end if;
end if;
end loop;
end;
please help me in solving this.The same code its good for one tabular form and for the other it giving the checksum error.
Thanks in advance
phaniHi patrick,
Thanks for the reply i am getting the checksum error even if i used my primary key in the select statement of the MD5 checksum.
My primary key in the second tabular form is
htmldb_item.hidden(12,ECGEXT_ID) ECGEXT_ID
so i changed the process to:
for i in 1..htmldb_application.g_f12.count
loop
if htmldb_application.g_f12(i) is not null
then
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO l_cks
from ECGEXT where ECGEXT_ID = htmldb_application.g_f12(i);
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
if htmldb_application.g_fcs(i) != l_cks(i) then
-- val1 := htmldb_application.g_fcs(i);
-- val2 := l_cks(i);
-- insert into test2 (val_1,val_2) values (val1,val2);
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
end if;
end if;
end loop;
It's not possible to use BULK COLLECT to get the MD5 checksum of all >>>rows. Because the index positions in the MD5 array and the >>>apex_application.g_fxx array index will probably not match, especially if you >>>don't order or if you are on a second page.How come the first tabular form is running i used the bulk collect in the first tabular form
HERE IS THE CODE FOR THE FIRST TABULAR FORM:
-- Get original MD5 checksum
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO
l_cks
from ECGEXST where ECGEXDT_ID = :P65_ECGEXDT_ID;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
for i in 1..l_cks.count
loop
if htmldb_application.g_fcs(i) != l_cks(i) then
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
-- return;
end if;
end loop; -
Delete Functionality in manual tabular form
Hi everyone,
I have created 2 tabular forms on the same page.everthing is working fine.Both the tabular form are able to insert and update.I am getting problem to implement the DELETE functionality in those tabular form.
I inserted this code htmldb_item.checkbox(6, id) del in the region and i created a delete process.But i am getting (no data found) error.
could anyone help me in solving this.
thanks
phani
===========================================================
DELETE PROCESS:
FOR i in 1..HTMLDB_APPLICATION.G_F01.count
LOOP
DELETE FROM (TABLE NAME)
WHERE id = HTMLDB_APPLICATION.G_F06(i);
END LOOP;
=============================================================
TABULAR FORM 1:
REGION:
select x.column1,
x.column2,
x.column3,
x.column4,
x.column5,
x.del,
x.cks
from (
select htmldb_item.hidden(1,column1) column1,
htmldb_item.text(2,column2,10) column2,
htmldb_item.text(3,column3,10) column3,
htmldb_item.text(4,column4,10) column4,
wwv_flow_item.date_popup(5,null,column5) column5,
htmldb_item.checkbox(6,column1) del,
htmldb_item.md5_checksum(column2,column3,column4,column5) cks
from TABLENAME
union all
select htmldb_item.hidden(1,null) column1,
htmldb_item.text(2,null,10) column2,
htmldb_item.text(3,null,10) column3,
htmldb_item.text(4,null,10) column4,
wwv_flow_item.date_popup(5,null,null) column5,
htmldb_item.checkbox(6,null) del,
htmldb_item.md5_checksum(null,null,null,null) cks
from dual) x
==================================================================
PROCESS:
declare
l_cks wwv_flow_global.vc_arr2;
j pls_integer := 1;
begin
-- Get original MD5 checksum
select wwv_flow_item.md5(column2,column3,column4,column5) cks
BULK COLLECT INTO
l_cks
from TABLE;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
-- for i in 1..l_cks.count
-- loop
-- if htmldb_application.g_fcs(i) != l_cks(i) then
-- rollback;
-- raise_application_error(
-- -20001,
-- 'Current version of data in database has changed '||
-- 'since user initiated update --process.');
--return;
-- end if;
-- end loop;
-- update
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
update TABLENAME
set column2= htmldb_application.g_f02(i),
column3 = htmldb_application.g_f03(i),
column4 = htmldb_application.g_f04(i),
column5 = htmldb_application.g_f05(i)
where column1 = htmldb_application.g_f01(i);
else
if htmldb_application.g_f03(i) is not null then
insert into TABLE
(column2,
column3,
column4,
column5
values
(htmldb_application.g_f02(i),
htmldb_application.g_f03(i),
htmldb_application.g_f04(i),
htmldb_application.g_f05(i));
end if;
end if;
end loop;
end;
I created the other tabular form on the same page with
htmldb_application.g_f11(i)
htmldb_application.g_f12(i)
htmldb_application.g_f13(i)
htmldb_application.g_f14(i)
used the same code.Have you got any response on this? I would like to know how to do it too. I am trying to implement a manual tabular form on a page and need this functionality.
I do know one thing. After attending the ODTUG conference last week, Raj said something about you have to process check boxes and radio groups separately from the rest of the form.
Thanks,
Michelle -
Select List in Manual Tabular Form based on a previous column
I have a manual tabular form that have several columns One column (vendor) is a select list that should be based on a previous column (Vendor Type - Internal/External). So if the user selects Internal for Vendor Type, the Vendor column's select list should only contain those vendors with type of Internal. By the way, it also uses APEX collections.
select
apex_item.hidden (1,C015) STATUS,
apex_item.checkbox (2,SEQ_ID,'title="check to delete"') CHECKBOX,
case
when (c001 is not null and c002 is not null) then
'<a onclick="return false;" href="f?p='||:APP_ID||':20:'||:APP_SESSION||'::NO:20:P20_ID,P20_REQ_ID,P20_SEQ_ID:'||C001||','||C002||','||SEQ_ID||'"><img alt="" src="/i/ed-item.gif"></a>'
end ||
apex_item.hidden (4,C001) ID,
apex_item.hidden (5,C002) JOB_QUOTE_ID,
apex_item.date_popup2 (6,C003,'MM/DD/YYYY',11,2000,'onChange="f_set_end_date(this.id,'|| ROWNUM || ');"') ||
apex_item.select_list_from_query (7,C004,'select svcs_description d, svcs_code r from csrsr_service_codes order by 1 asc',null,'YES',null,'-Select-') || '<BR />' ||
apex_item.date_popup2 (8,C005,'MM/DD/YYYY',11) ||
apex_item.text (9,C006,8,15,'style="text-align:right;"') || '<BR />' ||
apex_item.select_list (10,C007,'Staff;S,External;E',null,'YES',null,'-Select-') ||
apex_item.select_list_from_query_xl(11,C008,'select vendor_name d, vendor_number r from csrsr_vendors_v',null,'YES',null,'-Select-') || '<BR />' ||
apex_item.text (12,C009,50,100,'colspan=2') COL12,
apex_item.text (13,to_char(to_number(C010),'FML999G999G999G999G990D00'),10,15,'style="text-align:right;"') AMT1,
apex_item.text (14,to_char(to_number(C011),'FML999G999G999G999G990D00'),10,15,'style="text-align:right;"') AMT2,
apex_item.text (15,to_char(to_number(C012),'FML999G999G999G999G990D00'),10,15,'style="text-align:right;"') AMT3,
apex_item.text (16,to_char(to_number(C013),'FML999G999G999G999G990D00'),10,15,'style="text-align:right;"') AMT4,
apex_item.hidden (24,C001) ||
apex_item.hidden (25,C002) ||
apex_item.hidden (3,SEQ_ID) ||
apex_item.text (17,to_char(to_number(C014),'FML999G999G999G999G990D00'),10,15,'style="text-align:right;"') CHBK_AMT,
'value' COLTYPE
from
apex_collections
where
collection_name = 'CSRSR_JOBCOSTS_C' and
C015 in ('O','U','N')
union all
select
apex_item.hidden (1,null) STATUS,
apex_item.checkbox (2,null,'title="check to delete"') CHECKBOX,
apex_item.hidden (24,null) ||
apex_item.hidden (4,null) ID,
apex_item.hidden (25,null) ||
apex_item.hidden (5,null) JOB_QUOTE_ID,
apex_item.date_popup2 (6,null,'MM/DD/YYYY',11,2000,'onChange="f_set_end_date(this.id,'|| ROWNUM || ');"') ||
apex_item.select_list_from_query (7,null,'select svcs_description d, svcs_code r from csrsr_service_codes order by 1 asc',null,'YES',null,'-Select-') || '<BR />' ||
apex_item.date_popup2 (8,null,'MM/DD/YYYY',11) ||
apex_item.text (9,null,8,15,'style="text-align:right;"') || '<BR />' ||
apex_item.select_list (10,null,'Staff;S,External;E',null,'YES',null,'-Select-') ||
apex_item.select_list_from_query_xl(11,null,'select vendor_name d, vendor_number r from csrsr_vendors_v',null,'YES',null,'-Select-') || '<BR />' ||
apex_item.text (12,null,50,100,'colspan=2') COL12,
apex_item.text (13,null,10,15,'style="text-align:right;"') AMT1,
apex_item.text (14,null,10,15,'style="text-align:right;"') AMT2,
apex_item.text (15,null,10,15,'style="text-align:right;"') AMT3,
apex_item.text (16,null,10,15,'style="text-align:right;"') AMT4,
apex_item.hidden (24,null) ||
apex_item.hidden (25,null) ||
apex_item.hidden (3,null) ||
apex_item.text (17,null,10,15,'style="text-align:right;"') CHBK_AMT,
'value' COLTYPE
from
dual
How can I accomplish this?
Application Express 4.1.2
Oracle 10g Rel 2
RobertHi,
Then you are probably looking cascading select list in tabular form?
http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:2003800346210117
Regards,
Jari -
Display select list from query on manual tabular form
Hello,
I'm trying to display a select list from query on a manual tabular form. I'm using a collection to store the data. I can't seem to get the query to work. I can display the item as a text item. Any help would be appreciated. Thanks, Elizabeth.
SELECT
-- Notice how I'm keeping the idx value the same as the column value in the collection. This helps to keep things organized
-- I also apply an id to each entry
-- I append the error value to the empname and sal
-- The Seq_id. Usefull when hiding rows (for delete) and then submitting from
apex_item.hidden(1,x.seq_id, null, x.seq_id || '_seq_id') ||
-- The Primary Key of the column
apex_item.hidden(2, x.ceah_people_id, null, x.seq_id || '_ceah_people_id') || x.ceah_people_id ceah_people_id,
-- Employee Name
case when x.seq_id = -1
then
apex_item.select_list_from_query (3,
NULL,
'select distinct language_name d, '
|| 'language_id r from foreign_language',
'style="width:170px" ' ,
'YES',
'0',
'- Select Language -',
'x.seq_id_' || LPAD (9900 + LEVEL, 4, '0'),
NULL,
'NO'
else
apex_item.text (3,(select language_name from foreign_language where x.language_id = foreign_language.language_id),
80,
100,
'style="width:170px" readonly="readonly"',
'f32_' || LPAD (ROWNUM, 4, '0')
end
|| err.language_id language_id,
/* apex_item.text(3,x.language_id,null, null, null, x.seq_id || '_language_id') || err.language_id language_id,
-- Employee Salary
apex_item.text(4,x.proficiency, null, null, null, x.seq_id || '_proficiency') || err.proficiency ||
-- Store the sql action type as well.
apex_item.hidden(50,x.sql_action_typ, null, x.seq_id || '_sql_action_typ_id') proficiency,
-- Last but not least the row error
err.row_error
FROM (SELECT ac.c001 seq_id,
ac.c002 ceah_people_id,
ac.c003 language_id,
ac.c004 proficiency,
ac.c049 modifiable_flag,
ac.c050 sql_action_typ
FROM apex_collections ac
WHERE ac.collection_name = 'DATA_COLLECTION'
ORDER BY ac.seq_id) x,
-- Error Collection
(SELECT ac.seq_id seq_id,
ac.c002 ceah_people_id,
ac.c003 language_id,
ac.c004 proficiency,
ac.c050 row_error -- Useful when individual data is correct, however the row of data is not. Ex: start/end dates
FROM apex_collections ac
WHERE ac.collection_name = 'ERROR_COLLECTION'
ORDER BY ac.seq_id) err
WHERE x.seq_id = err.seq_id(+)I got so frustrated I started over. I'm following the how to create a manual form.
http://www.oracle.com/technology/products/database/application_express/howtos/tabular_form.html#MANUAL
The problem I'm now having is even though I display items as hidden, there is a column holder on the report for them. If I go into the report attributes and toggle the show attribute off I cannot reference an items value in my logic. I used / / for the column heading but I still get the little sort arrow where the column heading should be. I tried to toggle the sort attribute off but the sort arrow still shows up. How can I use the apex_item.hidden and not get a place holder for the column on a report? Thanks, Elizabeth
Here is the code I'm using to generate the report:
select x.ceah_people_lang_id,
x.language_id,
x.proficiency,
x.ceah_people_id
from (
select apex_item.hidden(1,ceah_people_lang_id) ceah_people_lang_id,
apex_item.select_list_from_query(2,language_id,'select language_name, language_id from foreign_language') language_id,
apex_item.select_list_from_query(3,proficiency,'select name, id from proficiency') proficiency,
apex_item.hidden(4,ceah_people_id) ceah_people_id
from ceah_people_language where ceah_people_language.ceah_people_id = :P152_person_id
union all
select apex_item.hidden(1,null) ceah_people_lang_id,
apex_item.select_list_from_query(2,null,'select language_name, language_id from foreign_language') language_id,
apex_item.select_list_from_query(3,null,'select name, id from proficiency') proficiency,
apex_item.hidden(4,null) ceah_people_id
from dual) x
Maybe you are looking for
-
I am trying to transfer songs from my iPod touch to my computer and can not figure out how to do it. I also want to transfer the songs I have back in to iTunes. My hard drive went out on my computer and I lost all of my songs, except for on my iPod.
-
Polish letters not displayed correctly in quality notification long text
Hello, in quality notification: when trying to write text in Polish language, some non-english letters are displayed incorectly. I did not find possibility to change the text language as in e.g. sales order texts. Using PL as login language solves th
-
ATWRT field is from which database table.
Hi Gurus, I need to see the field name ATWRT(Manufac Method) for the particular material number.from which database table can i access both the data.Please help me . Thanks in advance. Points will be rewarded. Thanks & Regards, A.Ashok kumar.
-
Hi. I have a collection of documents and I need to print them with different Headers and Footers. Headers and Footers are complex and don't overlap the document itselt. I have PDF's for the documents and PDF's for the headers-footers. Is there a way
-
No extensions in Safari 5 preferences .
I just installed Safari 5 and there isn't an extensions tab in the preference window. I tried re-installing it which didn't help. I also tried installing an extension to see if that would somehow enable the feature. It told me to turn extensions on i