Manual Transport and Maintain in Client Entries in Table

Hello,
I am trying to figure out how I can maintain table entries in client and have the option to manually transport entries from our development system. Can this be done? If so, what settings are required.
Regards, Dean.

Hi Dean ,
PLease proceed as below :
To add the contents in the TR, we have to double click on the respective TR, then another screen appears where we need to key in the details as follows:
u2022     Program Id u2013 R3TR
u2022     Object Type u2013 TABU
u2022     Object Name u2013 The required table name which should be transported, and press enter. This will allow transporting only the structure of the table but not its contents.
In case the contents are also to be transported, we should click on the key field icon and add the key fields of that table which will transport the particular record.
Hope its help you

Similar Messages

SAP Fiori - Transports Dev to QA/Prod issues (Activate and Maintain Service)

Hi All,
We have configured and activated Fiori - PO and PR scenarios in development environment using Central Hub Architecture (Gateway-Backend system). It is working great. However, we are facing an issue while transporting the configuration between the environments. We configured the entries (System Alias, Activate and Maintain Service and Scenario) for QA/Prod Environment in Development environment and transporting those (as it lets us to create TR's and as any SAP Configuration or technical Object). The transports are imported successfully, however the service is not activated or seen in "Activate and Maintain Services" in QA/Production Environment. But, scenario definition for PO and PR are imported successfully and visible
Steps and Transports:
1. System alias configured for QA/Production (Central hub) entries in Development box and transported - Successfully imported and entries are seen
2. Activate and Maintain Service entries are configured (workbench request- Loads Oauth and Metadata along with the System Alias assigned) - Transport import successfully, However not seen in "Activate and Maintain Services" (tried even creating a customization TR's)
3. Scenario Definition (PO and PR) - These are successfully imported as well as we are able to see the entries in SPRO
Solution Options:
1. Configure the entries and import (No success yet)
2. Manually re-configure or Activate and Maintain Service in each system [QA/Prod] (Again, SAP let us transport for this step - So, my understanding option 1 should work).
Any recommendation or suggestions ? Or is the Option 2 the only way to go!
Thanks in advance
Cheers,
Sri

Hi Sri,
I think the Support Package for Gateway is old.
1922510 - Activated Gateway Services are transported only incompletely
Regards, Masa
SAP Customer Experience Group - CEG

Table Maintenance: Manual Transport for Entries in Customizing Table

Dear forum,
i'm facing a tricky problem at the moment. My customer wants the maintain a customizing table, but he does not want to transport the entries automatically (don't ask me for the reason), but manually.
The online help tells me, that this can be done.
In the SE11 i chose untilities -> table maintenance generator and for the subscreen "dialog data transport details" i chose "no or user, recording routine".
Continuing wiht the SE11 i chose untilities -> table maintenance generator -> environment -> maintenance objects -> transport "manual transport".
In the SE54 i created the events 10, 11 and 12 with the recommended coding from the online help.
But when i start the Maintenance via SM30 the points in the menue table view -> transport or edit -> transport are not active.
The function group does not include any generated statuses to activate the menue-points. What is missing toi get the popup, that asks me for the transport number?
Can somebody help me out or tried this before?
With kindly Regards,
Robert

wrong!
the online documentation says:
Manual transport
The object maintenance transaction offers a manual link to transports. You can branch to it by selecting the Transport menu option. In the transport session, you can then select objects to place them in a Change request. A special transport program may be available instead of the menu option Transport, to place the object in a change request. The setting Manual transport means that changes to the object are not automatically recorded. If the maintenance transaction offers an automatic transport link, in addition to the manual one, you should select the setting Automatic transport.
What has to be done to realise it except creating the events?

Client executed F.5E in Production run and told us no entries are

Hi All,
Issue:
Client executed F.5E in Production run and told us no entries are
generated.
When they/i run
1.F.5D no error.
2.Initially when they run F.5E error is
No postings can be created for company code 1000
Errors occur when determinig adjustment accounts
Correct the error
Run report SAPF180K
Thankx in advance

Dear Vivek
Thanks for your quick response
In our case error message is same but when we click on it, it take us to FS00 screen
we are not maintained any where post automatically for GL account In GA0, GA1, GA2
Please help me to solve this issue

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

All devices signed into the same iCloud account will finish up with the same contacts. Of course if prior to joining iCloud two family members each had an entry for Uncle Fred, then you will finish up with two contact cards for Uncle Fred, and so on. If you tidy this up on your computer then the changes will propagate to everyone else.

SLDCHECK error-Check and maintain the SLD content for the current client

Hi experts,
       I am trying to configure PI on QAS box and getting this error when I ran SLD check. This is the only warning/error I am getting in YELLOW and the other messages were in green so thinking that is ok.
=============
   Calling function LCR_GET_OWN_BUSINESS_SYSTEM
   Retrieving data from the SLD server...
No corresponding business system found for system NWQ      client 001
    => Check and maintain the SLD content for the current client
    Summary: Connection to SLD works technically, but the SLD content may need maintenance
   => Check and maintain the SLD data content
==========
I went through some threads and readiness check document but not able to get it resolved because I am a developer and not sure about exact steps. Please give me if you have any feedback and if there is admin jobs involved I will get BASIS help but it is totally my responsibilty to get the system up and running. Any help would be greatly appreciated.
Thanks.
Mithun

Hi Mithun,
    Let me know if there is any recent changes/Patching/Upgradatiions in your server....
Perform Cacherefresh both in ABAP and JAVA Stacks..
For ABAP level cache go to SXI_CACHE -> RUNTIME->START DELTACACHE REFRESH
>>>>SXI_CACHE -> RUNTIME->COMPLETE CACHE REFRESH
CPACACHE:
For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
Please let me know if this doesnot resolve your issue.
Cheers!!!!
Naveen

BAPI for updating Maintain Duration in Transportation and Delivery scheduling

Hi all,
Iam looking for a BAPI to update the Duration Times in Transportation and Delivery scheduling. I reluctant to use recording on SM30 Table maintenance T code and use it in LSMW. Is there a BAPI or Standard i/p Program to load these details. I have more than 200000 records to input.
A list of all BAPI's in Transportation Management module would be great as well.
Regards,
Avi

Hi,
@praveen: I tried the solution provided by you and it worked for me in this context. But it seems this BADI gets triggered every time the delivery is getting saved. So for my test purposes, I'm triggering this BADI in a program, but in actual scenario, the BADI would be called on every sy-ucomm = 'SICH_T' i.e. SAVE. hence, I can't separate my piece of code using this condition.
I'm trying to call my FM(update module in collective run mode) inside this BADI in backgrnd task as a separate unit but this doesn't seem to work.
Any more suggestions?
Thanks
Ashish

RDS 2012 Disable HTTP transport - Enable only RPC over HTTP for both pre 8 and 8 RDP clients

Hi,
Is it possible to enable only RPC over HTTP for both pre 8 and 8 RDP clients?
Thank you

I would like to know this as well.

How to transport device types between clients

Hi everyone!
I need to transport a new device type that has been recently imported to my development client to my test and production clients.
But how do I do that? I'm not that much used to ABAP development workbench.
I've found some tips regarding the use of report RSTXSCRP or SPAD utilities but only for importing or exporting device types. In production clients, this is not possible since the system is not modifiable.
Any help or tip is appreciated.
Thanks,
Paulo

Changing the device type in your DEV client should have generated a transport.
If it didn't, you should be able to create one manually with the attributes R3TR PRIN DEVICENAME (Program ID, Object Type, Object Name).
For example, if you changed or created a device type named ZHPLJ4, your transport task would have an entry for
R3TR PRIN ZHPLJ4

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

Diffrence between File Transport and CTS+ Transport in PI

Hi Guys,
Can you please explain me the diffrence between File Transport and CTS+ Transport in PI.
What are the advantages of CTS+ Transportation over FILE Transportation...
Thanks,
Siva...

The file transfer will simply export the objects to a TPZ file, allowing you to import on the target system. This requires manual copying and paste of the object and have no further control.
CTS+ on the other side, allows the environment to maintain transport requests with control over objects audit. For example, an object must be created on DEV, then after being developed it must go to QA system and will only be sent to PROD when this object was approved by the respective team on QA. For more information on CTS+, please check the help page below.
http://help.sap.com/saphelp_nwpi71/helpdata/en/9a/775de286874bc78dcb1470bc80f0f9/frameset.htm
Also the documentation below will provide a more complete overview and configuration steps for the CTS+ usage
"http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/application-lifecycle-management/lifecycle-management/software-logistics/new%20features%20in%20sap%20enhancement%20package%201%20for%20sap%20netweaver%207.0.pdf"
Please also refer to the SDN thread below
How to move PI objects in IR and ID from DEV to QAS

Transports. (Copy as per transport request from one client to another)

Iu2019ve enhanced the datasource 2lis_13_vditm with required fields in client 100. I removed hide check box for the fields and activated the datasource. Iu2019m maintaining three separate requests one for deactivation, second for activation and third for datasource modification.
In order to reflect these changes to client 200, I run SCC1 and copied the requests from client 100 to client 200. Iu2019m wondering these changes are not reflecting into client 200. Still Datasource is inactive in client 200 and active in client 100.
Advance thank you very much

Hi Sharsha;
Please run SCC1 and select "including Request Subtasks".
Don't forget any transport request.
Regards;
Ricardo

Inconsistant transport requests after local client copy

Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
Andreas

Hello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim

[ChaRM] 2 DEV clients and 2 QA clients

Hi
I have a situation where 2 DEV clients and 2 QA clients exist before release to production.
DEV
100 Workbench
200 Customizing
QA
100 Test 1 (for vendor)
200 Test 2 (for customer)
PRD
100 Production
Transports from DEV 100 and DEV 200 need to be released to QA 100 and 200.
(sometimes to only one of 2 QA clients, which makes it even more complicated)
If I apply SolMan ChaRM to this enviornment, what configuration are recommended?
(SMSY, TMS???)
Thank you

Hi,
PI discards all the MAC table entries that are on trunk ports for a switch. This enhancement was added from PI 2.1 & later.
- Ashok
Please rate the useful post or mark as correct answer as it will help others looking for similar information

Manual invoicing and RR wrt foreign currency

Hi SD Gurus
Anybody pls help me ,
" Manual invoicing and RR wrt foreign currency".-- Fixing Core Phase.
Pls send me Business process for this Pain Area.
Very Urgent.
Thanking you
with regards
pawan

Can you be more specific ?
I have entered
doc.date, posting date, CC, currency and then I go to line item
posting key 09, customer number xxx but system give me error message :
Diagnosis
Posting key "09" (account type "D") has been programmed for special G/L transactions. However, either no attributes have been defined for special G/L transaction "", or the classification is incomplete (down payment, bill of exchange, other).
System Response
Incorrect definition in FI customizing tables.
Procedure
Maintain the entry for account type "D" and special G/L transaction "" using the FI customizing functions.

Manual Transport and Maintain in Client Entries in Table

Similar Messages

Maybe you are looking for