Manual vs auto UD

Hello Experts
How does one turn auto UD off??
How does one turn auto UD on??

While enabling QM Procurement view in MM01, in inspection type assignment like 01,06,07,08,89 and so on, in that inspection assignment type better disable autoUD which is at the bottom.

Similar Messages

I have an older IPOD that I'm having trouble getting new purchases on to my IPOD. I use to have a source list on the left hand side of screen where I dragged my purchases to and they downloaded. Can't find place to check manual vs. auto sync.

I have an older IPOD classic that I'm having trouble getting new purchases from library to IPOD. I use to have a IPOD icon in the source list on the left side of the screen. Now that is all gone. My purchases are coming up as recently purchased but can't figure out how to get them transferred to IPOD. I also can't find how to confirm setting is for manual not auto sync as the first computer I had blew up and am now using a different one. I haven't had any of these problems prior to the updates.

G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

Whats the difference on manual and auto update?

whats the difference? lets say i set on auto update. if i add a new song, video or picture, do i lose the old files from my ipod?

auto means your libary will automatically be your ipod. manual means you could chose songs to be on your ipod.also you could connect your ipod to a friends p/c and download a couple of there songs if you have the manual setting on.

Proxy changes back to manual from auto

Proxy settings changes from Auto back to Manual. How to correct this issue. Dell support suggest re-installing Windows 8.1; I saw there must be a better/easier fix for this issue!? Any suggestions???

Hi,
Are there any domain or OU level GPOs applied? If Proxy setting has been controlled by GPP, then the end user can change the proxy settings back, but after some time or a PC reboot, the proxy settings will revert back to its original settings, you can
contact the domain administrator if you are in a domin environment.
If this is a standalone PC, then another situation is that the system might be infected by some virus which insists changing the settings. perform a security scan to ensure the PC safety.
We can alos change the proxy settings via registry (backup your registry before making any changes on registry)
http://support2.microsoft.com/kb/819961
Yolanda Zhu
TechNet Community Support

Manual vs Auto Transitions

If I want to automate the application of default transitions between numerous clips into a sequence, I can highlight the clips and drag them to the Automate To Sequence icon, make my transition selections (overlay edit) and it is done. This process will apply the transitions on original unedited clips without handles and without repeating frames. Thus the auto sequence process must create the handles (that were not a part of the original clip) and apply the transitions without repeating frames. However, if I were to manually insert the same unedited original clips without handles into a sequence, select all the clips, then choose Sequence > Apply Transitions to Selection... the process will NOT create the handles necessary to apply the transitions without repeating frames. Default transitions will be applied but WITH repeated frames.....
Is there some method to set up the In and Out handles ahead of time for unedited clips that would automate the manually method of applying transitions? I am assuming repeating frames are bad and it is quite tedious and time consuming to manually create handles at the end and beginning of numerous frames prior to manually applying a transition... I am using PP CS5.5 and working with AVCHD m2ts files. Thanks
Greg

Hi Greg, I think I have read this correctly. You cannot expect transitions to to be able to make up frames that are not there, so instead they use duplicates of Early or late frames from that clip and preceeding clip to fill the transition timescale.
If your clips have unused frames before and after the in and out points then the transition effect will use those clips as opposed to repeating clips. Try a little experiment by starting a new project and add one clip with NO handles from the source monitor (ie no in point or out point Use the entire file) Then set some in and out points and see the difference. Just a little bit of experimenting in another project works wonders and keeps it simple.
I hope I have not mislead you, (but will soon be put into place no doubt if I have) but starting to get a bit bleary eyed now with my own problem in hand.
Regards
Dave.

Manual vs. auto update issues....

I had been using "manual update" when syncing my pod to iTunes. I have an external HD and, after adding music to iPod, would just move added music into the external's folder as well. My friend talked me into switching to "auto update"...said it was easier. Well, I tried it last night. Had to wait 4 hours for music to be recopied from HD to pod (why would ALL my music have to be updated? It's already on the iPod), then after that I unplugged pod from Mac to make sure music was updated. It was. Then I adjusted volume settings to music on HD and synched pod back to Mac. It updated.....and I had to wait another 4 hours for music (with new volume settings) to be updated back to my pod! Crap. I'm through with this auto update thing. Don't want to worry about having to wait 4 hours ever time I sync my pod to my computer. Any thoughts?

I have an external HD and, after adding music to iPod, would just move added music into the external's folder as well.
I'm confused.
You add music to iTunes, sync the iPod and then move the music? Sounds like you are not wanting to fill your internal hard drive.
Why not simply change the location of the iTunes library to your external hard drive? Then you simply add the songs to iTunes and your done.
Read this -> iTunes: Moving your iTunes Music folder
Then I adjusted volume settings to music on HD and synched pod back to Mac.
When you change your music files, it will reload the changed music files back to the iPod.
When automatically syncing, it shouldn't reload everything everytime.
It will load new files added to iTunes since the last iPod update. It will reload any files that have been changed (as above.) It sync some of the info (last played, ratings, etc) but this should only take a few seconds.
Don't know why it's taking 4 hours either.
Try changing the library location and see how long it takes.

Manually Adjust Auto-Correct

Oftentimes, when I'm typing a name, or even a word that actually is a word but Snow Leopard doesn't recognize it, the word changes into something that I don't want. Is there a way for me to access all the corrections and disable the ones I don't want? I know that the Text tab in Language & Text in System Preferences allows me to add custom auto-corrects, but there are a bunch built into the system that I don't want. For instance, I was typing the name "Shapiro", but it auto-corrected it into "Shaper". And sometimes in a long document, I have to manually go through and check everything instead of just a find and replace, for those times when I actually want the corrected word.

musicwind95 wrote:
Oftentimes, when I'm typing a name, or even a word that actually is a word but Snow Leopard doesn't recognize it, the word changes into something that I don't want. Is there a way for me to access all the corrections and disable the ones I don't want? I know that the Text tab in Language & Text in System Preferences allows me to add custom auto-corrects, but there are a bunch built into the system that I don't want. For instance, I was typing the name "Shapiro", but it auto-corrected it into "Shaper". And sometimes in a long document, I have to manually go through and check everything instead of just a find and replace, for those times when I actually want the corrected word.
You might find some of the information in this TidBITs article useful:
http://db.tidbits.com/article/10567

Manually copying / Auto-sync.

Hi Everyone,
I just wanted to double-check on something. I want to manually copy music from iTunes to the iPod. I found the directions on how to do that, but I'm concerned about one thing. The directions start by telling me to connect the iPod to the laptop first. When I do this, won't it automatically begin to synchronize and delete stuff off the iPod first? Or will it prompt me before it does anything? Just trying to be extra-cautious. Thank you in advance for any assistance.
Regards,
--- Gary
HP Pavilion 9795c Windows XP

The directions assume that you are going to change to manual before making any changes to your iTunes or before connecting to a different computer. If you have deleted anything in the meantime and you have your iPod set to auto it will erase what you took off. If you are connecting to your own computer it will not give you a prompt as it recognises this as the home library.
However you can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Edit> Preferences>iPod and check the "Manually manage songs and playlists" box.
If you are changing to manual because you want to connect to a different computer it's a different story. If your iPod is set to update automatically take care when connecting to a different computer and iTunes. If it is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No*. Pressing "Yes" will irretrievably remove all existing songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it: Using iPod with Multiple computers

Manual switch Auto Attendant

Hello,
When an incoming call hits the UC, I want to switch manually (button or code) what it does.
Normally during day the calls go to the Auto Attendant.
During night there is a message.
During the break there is another message.
And they want to have also 2 other messages they want to use in other cases.
Is it possible to resolve this problem with a script of some kind?
If not I need to let the call come in on a phone and set the phone in call-forward to the AA or different voicemail boxes through floating extensions.
Thanks,
Stephan

Hello,
This is going to be a little tricky. There is a couple of ways this can be accomplished, but there are some limitations with each method.
You can use the opened/closed hours in the Auto Attendant to change the greetings. The limitation here is that you can't manually switch, only be a schedule.
The alternative, is to use a manual night service configuration to send calls to 2 separate auto attendants. This will allow manual control, but only between 2 messages.
This might be possible with a custom script, but as we don't support custom scripts with UC500s, I couldn't tell if that would work.
Hope this helps.
Thanks,
-john

[6D] Handheld Night Shot Mode vs. Manual (or Auto)

Hi.
I am little bit confused about this "feature". There are no technical explanations how the merging of the four pictures is done. Some quick tests achieved more sharper images using A+ as with the SCN mode.
As no one (or most of the people) can hold their hands completely steady, single images are always shifted so merging them should produce some sort of ghosting effect or unsharp images.
One quick test:
SCN: 1/40 F5.6 ISO 12800
A+; 1/60 F4 ISO 12800
I am not sure if i limited the shutter speed to 1/40 min.
This is only one test in low light but A+ image was much sharper.
Can someone tell me in which particular situation it makes more sense to use the SCN mode? How far does it goes with slower shutter speed?
Thanks I would really appreciate if someone can me clear out on this one.
Cheers
Igor

I couldn't find any details on it, so I can only guess what it's doing. My basic philosophy is: camera auto functions can't do anything that I can't do myself, either through camera settings or in post. But I have much more control over doing it myself. I dunno, if the preset function works for you, then use it. But I wouldn't be surprised if you find it doesn't work as well as doing something yourself. Seems the nature of these things.
I don't think that Canon has invented some revolutionary new process that allows crisp handheld night shots. I'd guess that it tries to take four shots above a certain shutter speed (and I would guess around 1/40 to be a limit), and then it stacks them into a single image for exposure calculation. It's a technique used in astrophotography a fair bit, you can do it manually in photoshop or just get a program that does it for you.

Manually override auto off

in my old BB i was able to override auto off by using the on button on top. but with my Curve, when i set auto offf for 11 pm i am unable to manually turn the phone on until the auto on time is reached. anyone know how to fix this?

Hello
Welcome to the Community
May we know your device OS version and if you recently upgraded your device OS?
Thanks,
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

CS 5.1 - Manual and Auto upgrades not working

I originally posted this in the Camera Raw forum as I had have been trying to upgrade Camera Raw to 6.7 on my windows 7(32) machine running CS5.1. without success. It now appears that I am not able to carry of any updates in CS5.1 either through the program update routine or by download. All programs seem to be working fine apart from this.
If I try using Help>Update Adobe Application Manager opens, goes through an apparent download of all the updates but I see little data stream comming in and then staps saying there is a download problem please try later.
If I dowload the update direct for the Adobe site the download is fine but when I run AdobePatchInstaller.exe to istall say Camera Raw 6.7 Adobe Application Manager opens and thinks for a little whlie before giving "an error installing the update"
I have tried Adobe support adviser but this was of little help indicating "cpsid_90243r4: Error DW020 or DW050 occurs during installation - Creative Suite 5.5, Flash CS5.5, Flash Builder 4.5" which is apparently an error sometimes seen during initial installation.
Running Photoshop and the updates as administrator does not help.
Anyone any ideas other than a complete reinstall?

Hello! is bridge set to auto-run as your start your user session? this might cause problems. Try disabling that option from its preferences.
What other programs are running?
What version of ACR are you using for the moment?
Is the install path a non-standard one?

Satellite L500 - black screen after manual or auto restart

Hi everyone,
This has frustrated me for three weeks but I have only just realised it is associated with restart either manual or software requested.
My 6 week old L500 laptop refuses to do other than display lights for indiactors on front - no light on keyboard, no screen, fan running but no disk activity I can hear.
I have somehow managed to break through on three occasions by forcing shut down using the power on/off hold down, removing battery waiting and then starting up.
Earlier today it decided to restart under this method and I was able to quickly jump in and dump my Libraries and outlook.pst to an external hard drive cause my business runs off it.
Anyone know a solution to this problem?
This is the first Toshiba I have ever owned and it's really frustrating to have to fire up this 4 year old Acer to find a solution to my problem.
Maybe the problem is Windows 7 but can't find my way through that place to an answer.
Anyone, please???

Hi
You mean the L500 does not boot anymore?
The workaround removing the battery and ac adaptor doesnt help anymore?
Hmm usually this should not happen sometimes the notebook could hang somewhere during the stand by or hibernation and the mentioned workaround could be a option to wake up the unit
Its hard to say whats going wrong here possibly its hardware related issue
So maybe it would be the best get in contact with an local ASP the warranty should be valid and I think everything should be done for free

Help!! Askin about ITunes manual and auto manage!!

I was told by a friend that i could import my cd's, choose to manually update my library and not have to keep the albums (cd's) on my hard drive but yet still be able to have it in itunes and on my ipod, Is this true,,is it possible?? If so,,, some please explain!! -Thanks

You can do it but if you do you need to come up with some type of backup plan, Because when you have to restore the ipod due to some error/issue or you wipe the ipod blank (And the day will come) you will be screwed without backups on CD because you removed the files from the PC.
If you are wanting to do it due to limited harddrive space, you should think about buying a new internal harddrive or external harddrive.
That said, all you have to do (In iTUnes 7) is check "Manually manage songs" on the ipods summary page and hit "Apply" in the lower righthand corner. In this mode you manually drag songs (Or playlist) in iTUnes to the ipods name and drop it for it to be added to the ipod.
Once added to the ipod, Highlight the song in iTUnes library and hit the "Del" key on the keyboard

Canon 5D3 Feature Request / Wish -- Manual exposure auto shutter speed toggle

I've been using Canon gear the last six years & I don't know if this is currently possible in any camera body. If not, I believe it would prove highly helpful for working professionals.
When working in time-sensitive situations, I find myself frequently forced to use Av mode when I would prefer to remain in Manual exposure. Additionally, I find myself slowed down within Manual exposure mode when moving between inddor and outdoor light and/or other situations of dramatic ambient light fluctuation.
My wish would be for a menu assignment function for the "multi-function" button (next to the shutter release). Pressing the button while in M exposure mode would then set the shutter speed (like in Av mode--and another option could emulate Tv mode), and releasing the button would resume normal M exposure mode usage.
Personally, this is my biggest wish for the 5D3, and I would LOVE to see it implemented. (My second wish would be for the flash exposure lock to set the exposure of Flashes which are otherwise set to manual flash exposure, but that's another story).
Thanks,
Bert

Nope. That's a 1D X feature.

Manual vs auto UD

Similar Messages

Maybe you are looking for